Network packet capture
You can use Microsoft Message Analyzer to capture, display, and analyze protocol messaging traffic on your Windows 10 IoT Core device.
Working PowerShell Connection (Step 1 to 8 described at PowerShell.
Set up your device
After you rename your device, reboot the device to apply the name change.
Turn off the firewall
Connect to your device using PowerShell or SSH and run the following command to disable the firewall.
netsh advfirewall set allprofiles state off
Connect to your device using Message Analyzer
Now that your device is set up, let's connect to it using Microsoft Message Analyzer.
Download the Microsoft Message Analyzer.
Open Message Analyzer.
In the window that opens, click on the
Click on the
Replace Localhost with the name of your IoT device, and enter the administrator user name and password. Then click
Click on the
Select a trace scenariodropdown and select
Local Network Interfaces.
You should start to see the messages going through the network interfaces on your device.
After you start the trace through Message Analyzer, you can also view the ETW messages from the packet capture driver in your device's web interface. To do this, go to the ETW tab of the web interface, select
Registered providersdropdown menu and click the