Compartir a través de


AppDomain.Load Método

Definición

Carga un Assembly en este dominio de aplicación.

Sobrecargas

Load(Byte[])

Carga el Assembly con una imagen basada en el formato COFF (Common Object File Format) que contiene un Assembly emitido.

Load(AssemblyName)

Carga un Assembly a partir de su AssemblyName.

Load(String)

Carga un Assembly a partir de su nombre de presentación.

Load(Byte[], Byte[])

Carga el Assembly con una imagen basada en el formato COFF (Common Object File Format) que contiene un Assembly emitido. También se cargan los bytes sin formato que representan los símbolos del Assembly.

Load(AssemblyName, Evidence)
Obsoletos.

Carga un Assembly a partir de su AssemblyName.

Load(String, Evidence)
Obsoletos.

Carga un Assembly a partir de su nombre de presentación.

Load(Byte[], Byte[], Evidence)
Obsoletos.

Carga el Assembly con una imagen basada en el formato COFF (Common Object File Format) que contiene un Assembly emitido. También se cargan los bytes sin formato que representan los símbolos del Assembly.

Load(Byte[])

Source:
AppDomain.cs
Source:
AppDomain.cs
Source:
AppDomain.cs

Carga el Assembly con una imagen basada en el formato COFF (Common Object File Format) que contiene un Assembly emitido.

public:
 System::Reflection::Assembly ^ Load(cli::array <System::Byte> ^ rawAssembly);
public:
 virtual System::Reflection::Assembly ^ Load(cli::array <System::Byte> ^ rawAssembly);
public System.Reflection.Assembly Load (byte[] rawAssembly);
member this.Load : byte[] -> System.Reflection.Assembly
abstract member Load : byte[] -> System.Reflection.Assembly
override this.Load : byte[] -> System.Reflection.Assembly
Public Function Load (rawAssembly As Byte()) As Assembly

Parámetros

rawAssembly
Byte[]

Matriz de tipo byte que es una imagen basada en COFF que contiene un ensamblado emitido.

Devoluciones

Ensamblado cargado.

Implementaciones

Excepciones

rawAssembly es null.

rawAssembly no es un ensamblado válido para el tiempo de ejecución cargado actualmente.

La operación se intenta en un dominio de aplicación descargado.

Se cargó un ensamblado o módulo dos veces con dos evidencias diferentes.

Ejemplos

En el ejemplo siguiente se muestra el uso de la carga de un ensamblado sin formato.

Para que se ejecute este ejemplo de código, debe proporcionar el nombre completo del ensamblado. Para obtener información sobre cómo obtener el nombre completo del ensamblado, vea Nombres de ensamblado.

using namespace System;
using namespace System::IO;
using namespace System::Reflection;
using namespace System::Reflection::Emit;
void InstantiateMyType( AppDomain^ domain )
{
   try
   {
      
      // You must supply a valid fully qualified assembly name here.
      domain->CreateInstance( "Assembly text name, Version, Culture, PublicKeyToken", "MyType" );
   }
   catch ( Exception^ e ) 
   {
      Console::WriteLine( e->Message );
   }

}


// Loads the content of a file to a Byte array.
array<Byte>^ loadFile( String^ filename )
{
   FileStream^ fs = gcnew FileStream( filename,FileMode::Open );
   array<Byte>^buffer = gcnew array<Byte>((int)fs->Length);
   fs->Read( buffer, 0, buffer->Length );
   fs->Close();
   return buffer;
}


// Creates a dynamic assembly with symbol information
// and saves them to temp.dll and temp.pdb
void EmitAssembly( AppDomain^ domain )
{
   AssemblyName^ assemblyName = gcnew AssemblyName;
   assemblyName->Name = "MyAssembly";
   AssemblyBuilder^ assemblyBuilder = domain->DefineDynamicAssembly( assemblyName, AssemblyBuilderAccess::Save );
   ModuleBuilder^ moduleBuilder = assemblyBuilder->DefineDynamicModule( "MyModule", "temp.dll", true );
   TypeBuilder^ typeBuilder = moduleBuilder->DefineType( "MyType", TypeAttributes::Public );
   ConstructorBuilder^ constructorBuilder = typeBuilder->DefineConstructor( MethodAttributes::Public, CallingConventions::Standard, nullptr );
   ILGenerator^ ilGenerator = constructorBuilder->GetILGenerator();
   ilGenerator->EmitWriteLine( "MyType instantiated!" );
   ilGenerator->Emit( OpCodes::Ret );
   typeBuilder->CreateType();
   assemblyBuilder->Save( "temp.dll" );
}

ref class Resolver
{
public:
   static Assembly^ MyResolver( Object^ sender, ResolveEventArgs^ args )
   {
      AppDomain^ domain = dynamic_cast<AppDomain^>(sender);
      
      // Once the files are generated, this call is
      // actually no longer necessary.
      EmitAssembly( domain );
      array<Byte>^rawAssembly = loadFile( "temp.dll" );
      array<Byte>^rawSymbolStore = loadFile( "temp.pdb" );
      Assembly^ assembly = domain->Load( rawAssembly, rawSymbolStore );
      return assembly;
   }

};

int main()
{
   AppDomain^ currentDomain = AppDomain::CurrentDomain;
   InstantiateMyType( currentDomain ); // Failed!
   currentDomain->AssemblyResolve += gcnew ResolveEventHandler( Resolver::MyResolver );
   InstantiateMyType( currentDomain ); // OK!
}
using System;
using System.IO;
using System.Reflection;
using System.Reflection.Emit;

class LoadRawSnippet {
   public static void Main() {
      AppDomain currentDomain = AppDomain.CurrentDomain;

      InstantiateMyType(currentDomain);   // Failed!

      currentDomain.AssemblyResolve += new ResolveEventHandler(MyResolver);

      InstantiateMyType(currentDomain);   // OK!
   }

   static void InstantiateMyType(AppDomain domain) {
      try {
     // You must supply a valid fully qualified assembly name here.
         domain.CreateInstance("Assembly text name, Version, Culture, PublicKeyToken", "MyType");
      } catch (Exception e) {
         Console.WriteLine(e.Message);
      }
   }

   // Loads the content of a file to a byte array.
   static byte[] loadFile(string filename) {
      FileStream fs = new FileStream(filename, FileMode.Open);
      byte[] buffer = new byte[(int) fs.Length];
      fs.Read(buffer, 0, buffer.Length);
      fs.Close();

      return buffer;
   }

   static Assembly MyResolver(object sender, ResolveEventArgs args) {
      AppDomain domain = (AppDomain) sender;

      // Once the files are generated, this call is
      // actually no longer necessary.
      EmitAssembly(domain);

      byte[] rawAssembly = loadFile("temp.dll");
      byte[] rawSymbolStore = loadFile("temp.pdb");
      Assembly assembly = domain.Load(rawAssembly, rawSymbolStore);

      return assembly;
   }

   // Creates a dynamic assembly with symbol information
   // and saves them to temp.dll and temp.pdb
   static void EmitAssembly(AppDomain domain) {
      AssemblyName assemblyName = new AssemblyName();
      assemblyName.Name = "MyAssembly";

      AssemblyBuilder assemblyBuilder = domain.DefineDynamicAssembly(assemblyName, AssemblyBuilderAccess.Save);
      ModuleBuilder moduleBuilder = assemblyBuilder.DefineDynamicModule("MyModule", "temp.dll", true);
      TypeBuilder typeBuilder = moduleBuilder.DefineType("MyType", TypeAttributes.Public);

      ConstructorBuilder constructorBuilder = typeBuilder.DefineConstructor(MethodAttributes.Public, CallingConventions.Standard, null);
      ILGenerator ilGenerator = constructorBuilder.GetILGenerator();
      ilGenerator.EmitWriteLine("MyType instantiated!");
      ilGenerator.Emit(OpCodes.Ret);

      typeBuilder.CreateType();

      assemblyBuilder.Save("temp.dll");
   }
}
open System
open System.IO
open System.Reflection
open System.Reflection.Emit

let instantiateMyType (domain: AppDomain) =
    try
        // You must supply a valid fully qualified assembly name here.
        domain.CreateInstance("Assembly text name, Version, Culture, PublicKeyToken", "MyType")
        |> ignore  
    with e ->
        printfn $"{e.Message}"

// Loads the content of a file to a byte array.
let loadFile filename =
    use fs = new FileStream(filename, FileMode.Open)
    let buffer = Array.zeroCreate<byte> (int fs.Length)
    fs.Read(buffer, 0, buffer.Length) |> ignore
    fs.Close()
    buffer

// Creates a dynamic assembly with symbol information
// and saves them to temp.dll and temp.pdb
let emitAssembly (domain: AppDomain) =
    let assemblyName = AssemblyName()
    assemblyName.Name <- "MyAssembly"

    let assemblyBuilder = domain.DefineDynamicAssembly(assemblyName, AssemblyBuilderAccess.Save)
    let moduleBuilder = assemblyBuilder.DefineDynamicModule("MyModule", "temp.dll", true)
    let typeBuilder = moduleBuilder.DefineType("MyType", TypeAttributes.Public)

    let constructorBuilder = typeBuilder.DefineConstructor(MethodAttributes.Public, CallingConventions.Standard, null)
    let ilGenerator = constructorBuilder.GetILGenerator()
    ilGenerator.EmitWriteLine "MyType instantiated!"
    ilGenerator.Emit OpCodes.Ret

    typeBuilder.CreateType() |> ignore

    assemblyBuilder.Save "temp.dll"

let myResolver (sender: obj) (args: ResolveEventArgs) =
    let domain = sender :?> AppDomain

    // Once the files are generated, this call is
    // actually no longer necessary.
    emitAssembly domain

    let rawAssembly = loadFile "temp.dll"
    let rawSymbolStore = loadFile "temp.pdb"
    domain.Load(rawAssembly, rawSymbolStore)

let currentDomain = AppDomain.CurrentDomain

instantiateMyType currentDomain   // Failed!

currentDomain.add_AssemblyResolve (ResolveEventHandler myResolver)

instantiateMyType currentDomain   // OK!
Imports System.IO
Imports System.Reflection
Imports System.Reflection.Emit

Module Test
   
   Sub Main()
      Dim currentDomain As AppDomain = AppDomain.CurrentDomain
      
      InstantiateMyType(currentDomain)      ' Failed!

      AddHandler currentDomain.AssemblyResolve, AddressOf MyResolver
      
      InstantiateMyType(currentDomain)      ' OK!
   End Sub
   
   
   Sub InstantiateMyType(domain As AppDomain)
      Try
     ' You must supply a valid fully qualified assembly name here.
         domain.CreateInstance("Assembly text name, Version, Culture, PublicKeyToken", "MyType")
      Catch e As Exception
         Console.WriteLine(e.Message)
      End Try
   End Sub
   
   
   ' Loads the content of a file to a byte array. 
   Function loadFile(filename As String) As Byte()
      Dim fs As New FileStream(filename, FileMode.Open)
      Dim buffer(CInt(fs.Length - 1)) As Byte
      fs.Read(buffer, 0, buffer.Length)
      fs.Close()
      
      Return buffer
   End Function 'loadFile
   
   
   Function MyResolver(sender As Object, args As ResolveEventArgs) As System.Reflection.Assembly
      Dim domain As AppDomain = DirectCast(sender, AppDomain)
      
      ' Once the files are generated, this call is
      ' actually no longer necessary.
      EmitAssembly(domain)
      
      Dim rawAssembly As Byte() = loadFile("temp.dll")
      Dim rawSymbolStore As Byte() = loadFile("temp.pdb")
      Dim myAssembly As System.Reflection.Assembly = domain.Load(rawAssembly, rawSymbolStore)
      
      Return myAssembly
   End Function 'MyResolver
   
   
   ' Creates a dynamic assembly with symbol information
   ' and saves them to temp.dll and temp.pdb
   Sub EmitAssembly(domain As AppDomain)
      Dim assemblyName As New AssemblyName()
      assemblyName.Name = "MyAssembly"
      
      Dim assemblyBuilder As AssemblyBuilder = domain.DefineDynamicAssembly(assemblyName, AssemblyBuilderAccess.Save)
      Dim moduleBuilder As ModuleBuilder = assemblyBuilder.DefineDynamicModule("MyModule", "temp.dll", True)
      Dim typeBuilder As TypeBuilder = moduleBuilder.DefineType("MyType", TypeAttributes.Public)
      
      Dim constructorBuilder As ConstructorBuilder = typeBuilder.DefineConstructor(MethodAttributes.Public, CallingConventions.Standard, Nothing)
      Dim ilGenerator As ILGenerator = constructorBuilder.GetILGenerator()
      ilGenerator.EmitWriteLine("MyType instantiated!")
      ilGenerator.Emit(OpCodes.Ret)
      
      typeBuilder.CreateType()
      
      assemblyBuilder.Save("temp.dll")
   End Sub

End Module 'Test

Comentarios

Para obtener información común a todas las sobrecargas de este método, consulte la sobrecarga del Load(AssemblyName) método.

A partir de .NET Framework 4, el nivel de confianza de un ensamblado que se carga mediante este método es el mismo que el nivel de confianza del dominio de aplicación.

Se aplica a

Load(AssemblyName)

Source:
AppDomain.cs
Source:
AppDomain.cs
Source:
AppDomain.cs

Carga un Assembly a partir de su AssemblyName.

public:
 System::Reflection::Assembly ^ Load(System::Reflection::AssemblyName ^ assemblyRef);
public:
 virtual System::Reflection::Assembly ^ Load(System::Reflection::AssemblyName ^ assemblyRef);
public System.Reflection.Assembly Load (System.Reflection.AssemblyName assemblyRef);
member this.Load : System.Reflection.AssemblyName -> System.Reflection.Assembly
abstract member Load : System.Reflection.AssemblyName -> System.Reflection.Assembly
override this.Load : System.Reflection.AssemblyName -> System.Reflection.Assembly
Public Function Load (assemblyRef As AssemblyName) As Assembly

Parámetros

assemblyRef
AssemblyName

Objeto que describe el ensamblado que se va a cargar.

Devoluciones

Ensamblado cargado.

Implementaciones

Excepciones

assemblyRef es null.

No se ha encontrado assemblyRef.

assemblyRef no es un ensamblado válido para el tiempo de ejecución cargado actualmente.

La operación se intenta en un dominio de aplicación descargado.

Se cargó un ensamblado o módulo dos veces con dos evidencias diferentes.

Comentarios

Este método solo se debe usar para cargar un ensamblado en el dominio de aplicación actual. Este método se proporciona como una comodidad para los llamadores de interoperabilidad que no pueden llamar al método estático Assembly.Load . Para cargar ensamblados en otros dominios de aplicación, use un método como CreateInstanceAndUnwrap.

Si ya se ha cargado una versión del ensamblado solicitado, este método devuelve el ensamblado cargado, incluso si se solicita una versión diferente.

No se recomienda proporcionar un nombre de ensamblado parcial para assemblyRef . (Un nombre parcial omite uno o varios de los tokens de referencia cultural, versión o clave pública. En el caso de las sobrecargas que toman una cadena en lugar de un AssemblyName objeto, "MyAssembly, Version=1.0.0.0" es un ejemplo de un nombre parcial y "MyAssembly, Version=1.0.0.0, Culture=neutral, PublicKeyToken=18ab3442da84b47" es un ejemplo de un nombre completo). El uso de nombres parciales tiene un efecto negativo en el rendimiento. Además, un nombre de ensamblado parcial puede cargar un ensamblado desde la caché global de ensamblados solo si hay una copia exacta del ensamblado en el directorio base de la aplicación (BaseDirectory o AppDomainSetup.ApplicationBase).

Si el objeto actual AppDomain representa el dominio Ade aplicación y se llama al Load método desde el dominio Bde aplicación , el ensamblado se carga en ambos dominios de aplicación. Por ejemplo, el código siguiente se carga MyAssembly en el nuevo dominio ChildDomain de aplicación y también en el dominio de aplicación donde se ejecuta el código:

AppDomain^ ad = AppDomain::CreateDomain("ChildDomain");
ad->Load("MyAssembly");
AppDomain ad = AppDomain.CreateDomain("ChildDomain");
ad.Load("MyAssembly");
let ad = AppDomain.CreateDomain "ChildDomain"
ad.Load "MyAssembly"
Dim ad As AppDomain  = AppDomain.CreateDomain("ChildDomain")
ad.Load("MyAssembly")

El ensamblado se carga en ambos dominios porque Assembly no se deriva de MarshalByRefObjecty, por lo tanto, el valor devuelto del Load método no se puede serializar. En su lugar, Common Language Runtime intenta cargar el ensamblado en el dominio de aplicación que llama. Los ensamblados que se cargan en los dos dominios de aplicación pueden ser diferentes si la configuración de ruta de acceso de los dos dominios de aplicación es diferente.

Nota

Si se establecen tanto la AssemblyName.Name propiedad como la AssemblyName.CodeBase propiedad , el primer intento de cargar el ensamblado usa el nombre para mostrar (incluida la versión, la referencia cultural, etc.), tal y como devuelve la Assembly.FullName propiedad ). Si no se encuentra el archivo, la CodeBase propiedad se usa para buscar el ensamblado. Si el ensamblado se encuentra utilizando CodeBase, el nombre para mostrar se compara con el ensamblado. Si se produce un error en la coincidencia, se produce una FileLoadException excepción .

Se aplica a

Load(String)

Source:
AppDomain.cs
Source:
AppDomain.cs
Source:
AppDomain.cs

Carga un Assembly a partir de su nombre de presentación.

public:
 System::Reflection::Assembly ^ Load(System::String ^ assemblyString);
public:
 virtual System::Reflection::Assembly ^ Load(System::String ^ assemblyString);
public System.Reflection.Assembly Load (string assemblyString);
member this.Load : string -> System.Reflection.Assembly
abstract member Load : string -> System.Reflection.Assembly
override this.Load : string -> System.Reflection.Assembly
Public Function Load (assemblyString As String) As Assembly

Parámetros

assemblyString
String

Nombre para mostrar del ensamblado. Vea FullName.

Devoluciones

Ensamblado cargado.

Implementaciones

Excepciones

assemblyString es null

No se ha encontrado assemblyString.

assemblyString no es un ensamblado válido para el tiempo de ejecución cargado actualmente.

La operación se intenta en un dominio de aplicación descargado.

Se cargó un ensamblado o módulo dos veces con dos evidencias diferentes.

Comentarios

Para obtener información común a todas las sobrecargas de este método, consulte la sobrecarga del Load(AssemblyName) método.

Se aplica a

Load(Byte[], Byte[])

Source:
AppDomain.cs
Source:
AppDomain.cs
Source:
AppDomain.cs

Carga el Assembly con una imagen basada en el formato COFF (Common Object File Format) que contiene un Assembly emitido. También se cargan los bytes sin formato que representan los símbolos del Assembly.

public:
 System::Reflection::Assembly ^ Load(cli::array <System::Byte> ^ rawAssembly, cli::array <System::Byte> ^ rawSymbolStore);
public:
 virtual System::Reflection::Assembly ^ Load(cli::array <System::Byte> ^ rawAssembly, cli::array <System::Byte> ^ rawSymbolStore);
public System.Reflection.Assembly Load (byte[] rawAssembly, byte[]? rawSymbolStore);
public System.Reflection.Assembly Load (byte[] rawAssembly, byte[] rawSymbolStore);
member this.Load : byte[] * byte[] -> System.Reflection.Assembly
abstract member Load : byte[] * byte[] -> System.Reflection.Assembly
override this.Load : byte[] * byte[] -> System.Reflection.Assembly
Public Function Load (rawAssembly As Byte(), rawSymbolStore As Byte()) As Assembly

Parámetros

rawAssembly
Byte[]

Matriz de tipo byte que es una imagen basada en COFF que contiene un ensamblado emitido.

rawSymbolStore
Byte[]

Matriz de tipo byte que contiene los bytes sin formato que representan los símbolos del ensamblado.

Devoluciones

Ensamblado cargado.

Implementaciones

Excepciones

rawAssembly es null.

rawAssembly no es un ensamblado válido para el tiempo de ejecución cargado actualmente.

La operación se intenta en un dominio de aplicación descargado.

Se cargó un ensamblado o módulo dos veces con dos evidencias diferentes.

Ejemplos

En el ejemplo siguiente se muestra el uso de la carga de un ensamblado sin formato.

Para que se ejecute este ejemplo de código, debe proporcionar el nombre completo del ensamblado. Para obtener información sobre cómo obtener el nombre completo del ensamblado, vea Nombres de ensamblado.

using namespace System;
using namespace System::IO;
using namespace System::Reflection;
using namespace System::Reflection::Emit;
void InstantiateMyType( AppDomain^ domain )
{
   try
   {
      
      // You must supply a valid fully qualified assembly name here.
      domain->CreateInstance( "Assembly text name, Version, Culture, PublicKeyToken", "MyType" );
   }
   catch ( Exception^ e ) 
   {
      Console::WriteLine( e->Message );
   }

}


// Loads the content of a file to a Byte array.
array<Byte>^ loadFile( String^ filename )
{
   FileStream^ fs = gcnew FileStream( filename,FileMode::Open );
   array<Byte>^buffer = gcnew array<Byte>((int)fs->Length);
   fs->Read( buffer, 0, buffer->Length );
   fs->Close();
   return buffer;
}


// Creates a dynamic assembly with symbol information
// and saves them to temp.dll and temp.pdb
void EmitAssembly( AppDomain^ domain )
{
   AssemblyName^ assemblyName = gcnew AssemblyName;
   assemblyName->Name = "MyAssembly";
   AssemblyBuilder^ assemblyBuilder = domain->DefineDynamicAssembly( assemblyName, AssemblyBuilderAccess::Save );
   ModuleBuilder^ moduleBuilder = assemblyBuilder->DefineDynamicModule( "MyModule", "temp.dll", true );
   TypeBuilder^ typeBuilder = moduleBuilder->DefineType( "MyType", TypeAttributes::Public );
   ConstructorBuilder^ constructorBuilder = typeBuilder->DefineConstructor( MethodAttributes::Public, CallingConventions::Standard, nullptr );
   ILGenerator^ ilGenerator = constructorBuilder->GetILGenerator();
   ilGenerator->EmitWriteLine( "MyType instantiated!" );
   ilGenerator->Emit( OpCodes::Ret );
   typeBuilder->CreateType();
   assemblyBuilder->Save( "temp.dll" );
}

ref class Resolver
{
public:
   static Assembly^ MyResolver( Object^ sender, ResolveEventArgs^ args )
   {
      AppDomain^ domain = dynamic_cast<AppDomain^>(sender);
      
      // Once the files are generated, this call is
      // actually no longer necessary.
      EmitAssembly( domain );
      array<Byte>^rawAssembly = loadFile( "temp.dll" );
      array<Byte>^rawSymbolStore = loadFile( "temp.pdb" );
      Assembly^ assembly = domain->Load( rawAssembly, rawSymbolStore );
      return assembly;
   }

};

int main()
{
   AppDomain^ currentDomain = AppDomain::CurrentDomain;
   InstantiateMyType( currentDomain ); // Failed!
   currentDomain->AssemblyResolve += gcnew ResolveEventHandler( Resolver::MyResolver );
   InstantiateMyType( currentDomain ); // OK!
}
using System;
using System.IO;
using System.Reflection;
using System.Reflection.Emit;

class LoadRawSnippet {
   public static void Main() {
      AppDomain currentDomain = AppDomain.CurrentDomain;

      InstantiateMyType(currentDomain);   // Failed!

      currentDomain.AssemblyResolve += new ResolveEventHandler(MyResolver);

      InstantiateMyType(currentDomain);   // OK!
   }

   static void InstantiateMyType(AppDomain domain) {
      try {
     // You must supply a valid fully qualified assembly name here.
         domain.CreateInstance("Assembly text name, Version, Culture, PublicKeyToken", "MyType");
      } catch (Exception e) {
         Console.WriteLine(e.Message);
      }
   }

   // Loads the content of a file to a byte array.
   static byte[] loadFile(string filename) {
      FileStream fs = new FileStream(filename, FileMode.Open);
      byte[] buffer = new byte[(int) fs.Length];
      fs.Read(buffer, 0, buffer.Length);
      fs.Close();

      return buffer;
   }

   static Assembly MyResolver(object sender, ResolveEventArgs args) {
      AppDomain domain = (AppDomain) sender;

      // Once the files are generated, this call is
      // actually no longer necessary.
      EmitAssembly(domain);

      byte[] rawAssembly = loadFile("temp.dll");
      byte[] rawSymbolStore = loadFile("temp.pdb");
      Assembly assembly = domain.Load(rawAssembly, rawSymbolStore);

      return assembly;
   }

   // Creates a dynamic assembly with symbol information
   // and saves them to temp.dll and temp.pdb
   static void EmitAssembly(AppDomain domain) {
      AssemblyName assemblyName = new AssemblyName();
      assemblyName.Name = "MyAssembly";

      AssemblyBuilder assemblyBuilder = domain.DefineDynamicAssembly(assemblyName, AssemblyBuilderAccess.Save);
      ModuleBuilder moduleBuilder = assemblyBuilder.DefineDynamicModule("MyModule", "temp.dll", true);
      TypeBuilder typeBuilder = moduleBuilder.DefineType("MyType", TypeAttributes.Public);

      ConstructorBuilder constructorBuilder = typeBuilder.DefineConstructor(MethodAttributes.Public, CallingConventions.Standard, null);
      ILGenerator ilGenerator = constructorBuilder.GetILGenerator();
      ilGenerator.EmitWriteLine("MyType instantiated!");
      ilGenerator.Emit(OpCodes.Ret);

      typeBuilder.CreateType();

      assemblyBuilder.Save("temp.dll");
   }
}
open System
open System.IO
open System.Reflection
open System.Reflection.Emit

let instantiateMyType (domain: AppDomain) =
    try
        // You must supply a valid fully qualified assembly name here.
        domain.CreateInstance("Assembly text name, Version, Culture, PublicKeyToken", "MyType")
        |> ignore  
    with e ->
        printfn $"{e.Message}"

// Loads the content of a file to a byte array.
let loadFile filename =
    use fs = new FileStream(filename, FileMode.Open)
    let buffer = Array.zeroCreate<byte> (int fs.Length)
    fs.Read(buffer, 0, buffer.Length) |> ignore
    fs.Close()
    buffer

// Creates a dynamic assembly with symbol information
// and saves them to temp.dll and temp.pdb
let emitAssembly (domain: AppDomain) =
    let assemblyName = AssemblyName()
    assemblyName.Name <- "MyAssembly"

    let assemblyBuilder = domain.DefineDynamicAssembly(assemblyName, AssemblyBuilderAccess.Save)
    let moduleBuilder = assemblyBuilder.DefineDynamicModule("MyModule", "temp.dll", true)
    let typeBuilder = moduleBuilder.DefineType("MyType", TypeAttributes.Public)

    let constructorBuilder = typeBuilder.DefineConstructor(MethodAttributes.Public, CallingConventions.Standard, null)
    let ilGenerator = constructorBuilder.GetILGenerator()
    ilGenerator.EmitWriteLine "MyType instantiated!"
    ilGenerator.Emit OpCodes.Ret

    typeBuilder.CreateType() |> ignore

    assemblyBuilder.Save "temp.dll"

let myResolver (sender: obj) (args: ResolveEventArgs) =
    let domain = sender :?> AppDomain

    // Once the files are generated, this call is
    // actually no longer necessary.
    emitAssembly domain

    let rawAssembly = loadFile "temp.dll"
    let rawSymbolStore = loadFile "temp.pdb"
    domain.Load(rawAssembly, rawSymbolStore)

let currentDomain = AppDomain.CurrentDomain

instantiateMyType currentDomain   // Failed!

currentDomain.add_AssemblyResolve (ResolveEventHandler myResolver)

instantiateMyType currentDomain   // OK!
Imports System.IO
Imports System.Reflection
Imports System.Reflection.Emit

Module Test
   
   Sub Main()
      Dim currentDomain As AppDomain = AppDomain.CurrentDomain
      
      InstantiateMyType(currentDomain)      ' Failed!

      AddHandler currentDomain.AssemblyResolve, AddressOf MyResolver
      
      InstantiateMyType(currentDomain)      ' OK!
   End Sub
   
   
   Sub InstantiateMyType(domain As AppDomain)
      Try
     ' You must supply a valid fully qualified assembly name here.
         domain.CreateInstance("Assembly text name, Version, Culture, PublicKeyToken", "MyType")
      Catch e As Exception
         Console.WriteLine(e.Message)
      End Try
   End Sub
   
   
   ' Loads the content of a file to a byte array. 
   Function loadFile(filename As String) As Byte()
      Dim fs As New FileStream(filename, FileMode.Open)
      Dim buffer(CInt(fs.Length - 1)) As Byte
      fs.Read(buffer, 0, buffer.Length)
      fs.Close()
      
      Return buffer
   End Function 'loadFile
   
   
   Function MyResolver(sender As Object, args As ResolveEventArgs) As System.Reflection.Assembly
      Dim domain As AppDomain = DirectCast(sender, AppDomain)
      
      ' Once the files are generated, this call is
      ' actually no longer necessary.
      EmitAssembly(domain)
      
      Dim rawAssembly As Byte() = loadFile("temp.dll")
      Dim rawSymbolStore As Byte() = loadFile("temp.pdb")
      Dim myAssembly As System.Reflection.Assembly = domain.Load(rawAssembly, rawSymbolStore)
      
      Return myAssembly
   End Function 'MyResolver
   
   
   ' Creates a dynamic assembly with symbol information
   ' and saves them to temp.dll and temp.pdb
   Sub EmitAssembly(domain As AppDomain)
      Dim assemblyName As New AssemblyName()
      assemblyName.Name = "MyAssembly"
      
      Dim assemblyBuilder As AssemblyBuilder = domain.DefineDynamicAssembly(assemblyName, AssemblyBuilderAccess.Save)
      Dim moduleBuilder As ModuleBuilder = assemblyBuilder.DefineDynamicModule("MyModule", "temp.dll", True)
      Dim typeBuilder As TypeBuilder = moduleBuilder.DefineType("MyType", TypeAttributes.Public)
      
      Dim constructorBuilder As ConstructorBuilder = typeBuilder.DefineConstructor(MethodAttributes.Public, CallingConventions.Standard, Nothing)
      Dim ilGenerator As ILGenerator = constructorBuilder.GetILGenerator()
      ilGenerator.EmitWriteLine("MyType instantiated!")
      ilGenerator.Emit(OpCodes.Ret)
      
      typeBuilder.CreateType()
      
      assemblyBuilder.Save("temp.dll")
   End Sub

End Module 'Test

Comentarios

Para obtener información común a todas las sobrecargas de este método, consulte la sobrecarga del Load(AssemblyName) método.

A partir de .NET Framework 4, el nivel de confianza de un ensamblado que se carga mediante este método es el mismo que el nivel de confianza del dominio de aplicación.

Se aplica a

Load(AssemblyName, Evidence)

Precaución

Methods which use evidence to sandbox are obsolete and will be removed in a future release of the .NET Framework. Please use an overload of Load which does not take an Evidence parameter. See http://go.microsoft.com/fwlink/?LinkID=155570 for more information.

Carga un Assembly a partir de su AssemblyName.

public:
 virtual System::Reflection::Assembly ^ Load(System::Reflection::AssemblyName ^ assemblyRef, System::Security::Policy::Evidence ^ assemblySecurity);
public System.Reflection.Assembly Load (System.Reflection.AssemblyName assemblyRef, System.Security.Policy.Evidence assemblySecurity);
[System.Obsolete("Methods which use evidence to sandbox are obsolete and will be removed in a future release of the .NET Framework. Please use an overload of Load which does not take an Evidence parameter. See http://go.microsoft.com/fwlink/?LinkID=155570 for more information.")]
public System.Reflection.Assembly Load (System.Reflection.AssemblyName assemblyRef, System.Security.Policy.Evidence assemblySecurity);
abstract member Load : System.Reflection.AssemblyName * System.Security.Policy.Evidence -> System.Reflection.Assembly
override this.Load : System.Reflection.AssemblyName * System.Security.Policy.Evidence -> System.Reflection.Assembly
[<System.Obsolete("Methods which use evidence to sandbox are obsolete and will be removed in a future release of the .NET Framework. Please use an overload of Load which does not take an Evidence parameter. See http://go.microsoft.com/fwlink/?LinkID=155570 for more information.")>]
abstract member Load : System.Reflection.AssemblyName * System.Security.Policy.Evidence -> System.Reflection.Assembly
override this.Load : System.Reflection.AssemblyName * System.Security.Policy.Evidence -> System.Reflection.Assembly
Public Function Load (assemblyRef As AssemblyName, assemblySecurity As Evidence) As Assembly

Parámetros

assemblyRef
AssemblyName

Objeto que describe el ensamblado que se va a cargar.

assemblySecurity
Evidence

Evidencia para cargar el ensamblado.

Devoluciones

Ensamblado cargado.

Implementaciones

Atributos

Excepciones

assemblyRef es null

No se ha encontrado assemblyRef.

assemblyRef no es un ensamblado válido para el tiempo de ejecución cargado actualmente.

La operación se intenta en un dominio de aplicación descargado.

Se cargó un ensamblado o módulo dos veces con dos evidencias diferentes.

Comentarios

Para obtener información común a todas las sobrecargas de este método, consulte la sobrecarga del Load(AssemblyName) método.

Se aplica a

Load(String, Evidence)

Precaución

Methods which use evidence to sandbox are obsolete and will be removed in a future release of the .NET Framework. Please use an overload of Load which does not take an Evidence parameter. See http://go.microsoft.com/fwlink/?LinkID=155570 for more information.

Carga un Assembly a partir de su nombre de presentación.

public:
 virtual System::Reflection::Assembly ^ Load(System::String ^ assemblyString, System::Security::Policy::Evidence ^ assemblySecurity);
public System.Reflection.Assembly Load (string assemblyString, System.Security.Policy.Evidence assemblySecurity);
[System.Obsolete("Methods which use evidence to sandbox are obsolete and will be removed in a future release of the .NET Framework. Please use an overload of Load which does not take an Evidence parameter. See http://go.microsoft.com/fwlink/?LinkID=155570 for more information.")]
public System.Reflection.Assembly Load (string assemblyString, System.Security.Policy.Evidence assemblySecurity);
abstract member Load : string * System.Security.Policy.Evidence -> System.Reflection.Assembly
override this.Load : string * System.Security.Policy.Evidence -> System.Reflection.Assembly
[<System.Obsolete("Methods which use evidence to sandbox are obsolete and will be removed in a future release of the .NET Framework. Please use an overload of Load which does not take an Evidence parameter. See http://go.microsoft.com/fwlink/?LinkID=155570 for more information.")>]
abstract member Load : string * System.Security.Policy.Evidence -> System.Reflection.Assembly
override this.Load : string * System.Security.Policy.Evidence -> System.Reflection.Assembly
Public Function Load (assemblyString As String, assemblySecurity As Evidence) As Assembly

Parámetros

assemblyString
String

Nombre para mostrar del ensamblado. Vea FullName.

assemblySecurity
Evidence

Evidencia para cargar el ensamblado.

Devoluciones

Ensamblado cargado.

Implementaciones

Atributos

Excepciones

assemblyString es null

No se ha encontrado assemblyString.

assemblyString no es un ensamblado válido para el tiempo de ejecución cargado actualmente.

La operación se intenta en un dominio de aplicación descargado.

Se cargó un ensamblado o módulo dos veces con dos evidencias diferentes.

Comentarios

Para obtener información común a todas las sobrecargas de este método, consulte la sobrecarga del Load(AssemblyName) método.

Se aplica a

Load(Byte[], Byte[], Evidence)

Precaución

Methods which use evidence to sandbox are obsolete and will be removed in a future release of the .NET Framework. Please use an overload of Load which does not take an Evidence parameter. See http://go.microsoft.com/fwlink/?LinkId=155570 for more information.

Carga el Assembly con una imagen basada en el formato COFF (Common Object File Format) que contiene un Assembly emitido. También se cargan los bytes sin formato que representan los símbolos del Assembly.

public:
 virtual System::Reflection::Assembly ^ Load(cli::array <System::Byte> ^ rawAssembly, cli::array <System::Byte> ^ rawSymbolStore, System::Security::Policy::Evidence ^ securityEvidence);
public System.Reflection.Assembly Load (byte[] rawAssembly, byte[] rawSymbolStore, System.Security.Policy.Evidence securityEvidence);
[System.Obsolete("Methods which use evidence to sandbox are obsolete and will be removed in a future release of the .NET Framework. Please use an overload of Load which does not take an Evidence parameter. See http://go.microsoft.com/fwlink/?LinkId=155570 for more information.")]
public System.Reflection.Assembly Load (byte[] rawAssembly, byte[] rawSymbolStore, System.Security.Policy.Evidence securityEvidence);
abstract member Load : byte[] * byte[] * System.Security.Policy.Evidence -> System.Reflection.Assembly
override this.Load : byte[] * byte[] * System.Security.Policy.Evidence -> System.Reflection.Assembly
[<System.Obsolete("Methods which use evidence to sandbox are obsolete and will be removed in a future release of the .NET Framework. Please use an overload of Load which does not take an Evidence parameter. See http://go.microsoft.com/fwlink/?LinkId=155570 for more information.")>]
abstract member Load : byte[] * byte[] * System.Security.Policy.Evidence -> System.Reflection.Assembly
override this.Load : byte[] * byte[] * System.Security.Policy.Evidence -> System.Reflection.Assembly
Public Function Load (rawAssembly As Byte(), rawSymbolStore As Byte(), securityEvidence As Evidence) As Assembly

Parámetros

rawAssembly
Byte[]

Matriz de tipo byte que es una imagen basada en COFF que contiene un ensamblado emitido.

rawSymbolStore
Byte[]

Matriz de tipo byte que contiene los bytes sin formato que representan los símbolos del ensamblado.

securityEvidence
Evidence

Evidencia para cargar el ensamblado.

Devoluciones

Ensamblado cargado.

Implementaciones

Atributos

Excepciones

rawAssembly es null.

rawAssembly no es un ensamblado válido para el tiempo de ejecución cargado actualmente.

La operación se intenta en un dominio de aplicación descargado.

Se cargó un ensamblado o módulo dos veces con dos evidencias diferentes.

securityEvidence no es null. Cuando no se habilita la directiva CAS heredada, securityEvidence debe ser null.

Ejemplos

En el ejemplo siguiente se muestra el uso de la carga de un ensamblado sin formato.

Para que se ejecute este ejemplo de código, debe proporcionar el nombre completo del ensamblado. Para obtener información sobre cómo obtener el nombre completo del ensamblado, vea Nombres de ensamblado.

using namespace System;
using namespace System::IO;
using namespace System::Reflection;
using namespace System::Reflection::Emit;
void InstantiateMyType( AppDomain^ domain )
{
   try
   {
      
      // You must supply a valid fully qualified assembly name here.
      domain->CreateInstance( "Assembly text name, Version, Culture, PublicKeyToken", "MyType" );
   }
   catch ( Exception^ e ) 
   {
      Console::WriteLine( e->Message );
   }

}


// Loads the content of a file to a Byte array.
array<Byte>^ loadFile( String^ filename )
{
   FileStream^ fs = gcnew FileStream( filename,FileMode::Open );
   array<Byte>^buffer = gcnew array<Byte>((int)fs->Length);
   fs->Read( buffer, 0, buffer->Length );
   fs->Close();
   return buffer;
}


// Creates a dynamic assembly with symbol information
// and saves them to temp.dll and temp.pdb
void EmitAssembly( AppDomain^ domain )
{
   AssemblyName^ assemblyName = gcnew AssemblyName;
   assemblyName->Name = "MyAssembly";
   AssemblyBuilder^ assemblyBuilder = domain->DefineDynamicAssembly( assemblyName, AssemblyBuilderAccess::Save );
   ModuleBuilder^ moduleBuilder = assemblyBuilder->DefineDynamicModule( "MyModule", "temp.dll", true );
   TypeBuilder^ typeBuilder = moduleBuilder->DefineType( "MyType", TypeAttributes::Public );
   ConstructorBuilder^ constructorBuilder = typeBuilder->DefineConstructor( MethodAttributes::Public, CallingConventions::Standard, nullptr );
   ILGenerator^ ilGenerator = constructorBuilder->GetILGenerator();
   ilGenerator->EmitWriteLine( "MyType instantiated!" );
   ilGenerator->Emit( OpCodes::Ret );
   typeBuilder->CreateType();
   assemblyBuilder->Save( "temp.dll" );
}

ref class Resolver
{
public:
   static Assembly^ MyResolver( Object^ sender, ResolveEventArgs^ args )
   {
      AppDomain^ domain = dynamic_cast<AppDomain^>(sender);
      
      // Once the files are generated, this call is
      // actually no longer necessary.
      EmitAssembly( domain );
      array<Byte>^rawAssembly = loadFile( "temp.dll" );
      array<Byte>^rawSymbolStore = loadFile( "temp.pdb" );
      Assembly^ assembly = domain->Load( rawAssembly, rawSymbolStore );
      return assembly;
   }

};

int main()
{
   AppDomain^ currentDomain = AppDomain::CurrentDomain;
   InstantiateMyType( currentDomain ); // Failed!
   currentDomain->AssemblyResolve += gcnew ResolveEventHandler( Resolver::MyResolver );
   InstantiateMyType( currentDomain ); // OK!
}
using System;
using System.IO;
using System.Reflection;
using System.Reflection.Emit;

class LoadRawSnippet {
   public static void Main() {
      AppDomain currentDomain = AppDomain.CurrentDomain;

      InstantiateMyType(currentDomain);   // Failed!

      currentDomain.AssemblyResolve += new ResolveEventHandler(MyResolver);

      InstantiateMyType(currentDomain);   // OK!
   }

   static void InstantiateMyType(AppDomain domain) {
      try {
     // You must supply a valid fully qualified assembly name here.
         domain.CreateInstance("Assembly text name, Version, Culture, PublicKeyToken", "MyType");
      } catch (Exception e) {
         Console.WriteLine(e.Message);
      }
   }

   // Loads the content of a file to a byte array.
   static byte[] loadFile(string filename) {
      FileStream fs = new FileStream(filename, FileMode.Open);
      byte[] buffer = new byte[(int) fs.Length];
      fs.Read(buffer, 0, buffer.Length);
      fs.Close();

      return buffer;
   }

   static Assembly MyResolver(object sender, ResolveEventArgs args) {
      AppDomain domain = (AppDomain) sender;

      // Once the files are generated, this call is
      // actually no longer necessary.
      EmitAssembly(domain);

      byte[] rawAssembly = loadFile("temp.dll");
      byte[] rawSymbolStore = loadFile("temp.pdb");
      Assembly assembly = domain.Load(rawAssembly, rawSymbolStore);

      return assembly;
   }

   // Creates a dynamic assembly with symbol information
   // and saves them to temp.dll and temp.pdb
   static void EmitAssembly(AppDomain domain) {
      AssemblyName assemblyName = new AssemblyName();
      assemblyName.Name = "MyAssembly";

      AssemblyBuilder assemblyBuilder = domain.DefineDynamicAssembly(assemblyName, AssemblyBuilderAccess.Save);
      ModuleBuilder moduleBuilder = assemblyBuilder.DefineDynamicModule("MyModule", "temp.dll", true);
      TypeBuilder typeBuilder = moduleBuilder.DefineType("MyType", TypeAttributes.Public);

      ConstructorBuilder constructorBuilder = typeBuilder.DefineConstructor(MethodAttributes.Public, CallingConventions.Standard, null);
      ILGenerator ilGenerator = constructorBuilder.GetILGenerator();
      ilGenerator.EmitWriteLine("MyType instantiated!");
      ilGenerator.Emit(OpCodes.Ret);

      typeBuilder.CreateType();

      assemblyBuilder.Save("temp.dll");
   }
}
open System
open System.IO
open System.Reflection
open System.Reflection.Emit

let instantiateMyType (domain: AppDomain) =
    try
        // You must supply a valid fully qualified assembly name here.
        domain.CreateInstance("Assembly text name, Version, Culture, PublicKeyToken", "MyType")
        |> ignore  
    with e ->
        printfn $"{e.Message}"

// Loads the content of a file to a byte array.
let loadFile filename =
    use fs = new FileStream(filename, FileMode.Open)
    let buffer = Array.zeroCreate<byte> (int fs.Length)
    fs.Read(buffer, 0, buffer.Length) |> ignore
    fs.Close()
    buffer

// Creates a dynamic assembly with symbol information
// and saves them to temp.dll and temp.pdb
let emitAssembly (domain: AppDomain) =
    let assemblyName = AssemblyName()
    assemblyName.Name <- "MyAssembly"

    let assemblyBuilder = domain.DefineDynamicAssembly(assemblyName, AssemblyBuilderAccess.Save)
    let moduleBuilder = assemblyBuilder.DefineDynamicModule("MyModule", "temp.dll", true)
    let typeBuilder = moduleBuilder.DefineType("MyType", TypeAttributes.Public)

    let constructorBuilder = typeBuilder.DefineConstructor(MethodAttributes.Public, CallingConventions.Standard, null)
    let ilGenerator = constructorBuilder.GetILGenerator()
    ilGenerator.EmitWriteLine "MyType instantiated!"
    ilGenerator.Emit OpCodes.Ret

    typeBuilder.CreateType() |> ignore

    assemblyBuilder.Save "temp.dll"

let myResolver (sender: obj) (args: ResolveEventArgs) =
    let domain = sender :?> AppDomain

    // Once the files are generated, this call is
    // actually no longer necessary.
    emitAssembly domain

    let rawAssembly = loadFile "temp.dll"
    let rawSymbolStore = loadFile "temp.pdb"
    domain.Load(rawAssembly, rawSymbolStore)

let currentDomain = AppDomain.CurrentDomain

instantiateMyType currentDomain   // Failed!

currentDomain.add_AssemblyResolve (ResolveEventHandler myResolver)

instantiateMyType currentDomain   // OK!
Imports System.IO
Imports System.Reflection
Imports System.Reflection.Emit

Module Test
   
   Sub Main()
      Dim currentDomain As AppDomain = AppDomain.CurrentDomain
      
      InstantiateMyType(currentDomain)      ' Failed!

      AddHandler currentDomain.AssemblyResolve, AddressOf MyResolver
      
      InstantiateMyType(currentDomain)      ' OK!
   End Sub
   
   
   Sub InstantiateMyType(domain As AppDomain)
      Try
     ' You must supply a valid fully qualified assembly name here.
         domain.CreateInstance("Assembly text name, Version, Culture, PublicKeyToken", "MyType")
      Catch e As Exception
         Console.WriteLine(e.Message)
      End Try
   End Sub
   
   
   ' Loads the content of a file to a byte array. 
   Function loadFile(filename As String) As Byte()
      Dim fs As New FileStream(filename, FileMode.Open)
      Dim buffer(CInt(fs.Length - 1)) As Byte
      fs.Read(buffer, 0, buffer.Length)
      fs.Close()
      
      Return buffer
   End Function 'loadFile
   
   
   Function MyResolver(sender As Object, args As ResolveEventArgs) As System.Reflection.Assembly
      Dim domain As AppDomain = DirectCast(sender, AppDomain)
      
      ' Once the files are generated, this call is
      ' actually no longer necessary.
      EmitAssembly(domain)
      
      Dim rawAssembly As Byte() = loadFile("temp.dll")
      Dim rawSymbolStore As Byte() = loadFile("temp.pdb")
      Dim myAssembly As System.Reflection.Assembly = domain.Load(rawAssembly, rawSymbolStore)
      
      Return myAssembly
   End Function 'MyResolver
   
   
   ' Creates a dynamic assembly with symbol information
   ' and saves them to temp.dll and temp.pdb
   Sub EmitAssembly(domain As AppDomain)
      Dim assemblyName As New AssemblyName()
      assemblyName.Name = "MyAssembly"
      
      Dim assemblyBuilder As AssemblyBuilder = domain.DefineDynamicAssembly(assemblyName, AssemblyBuilderAccess.Save)
      Dim moduleBuilder As ModuleBuilder = assemblyBuilder.DefineDynamicModule("MyModule", "temp.dll", True)
      Dim typeBuilder As TypeBuilder = moduleBuilder.DefineType("MyType", TypeAttributes.Public)
      
      Dim constructorBuilder As ConstructorBuilder = typeBuilder.DefineConstructor(MethodAttributes.Public, CallingConventions.Standard, Nothing)
      Dim ilGenerator As ILGenerator = constructorBuilder.GetILGenerator()
      ilGenerator.EmitWriteLine("MyType instantiated!")
      ilGenerator.Emit(OpCodes.Ret)
      
      typeBuilder.CreateType()
      
      assemblyBuilder.Save("temp.dll")
   End Sub

End Module 'Test

Comentarios

Para obtener información común a todas las sobrecargas de este método, consulte la sobrecarga del Load(AssemblyName) método.

A partir de .NET Framework 4, el nivel de confianza de un ensamblado que se carga mediante este método es el mismo que el nivel de confianza del dominio de aplicación.

Se aplica a