Graphics.DrawClosedCurve Graphics.DrawClosedCurve Graphics.DrawClosedCurve Method

Definición

Dibuja una curva spline cardinal cerrada, definida por una matriz de estructuras Point.Draws a closed cardinal spline defined by an array of Point structures.

Sobrecargas

DrawClosedCurve(Pen, Point[], Single, FillMode) DrawClosedCurve(Pen, Point[], Single, FillMode) DrawClosedCurve(Pen, Point[], Single, FillMode)

Dibuja una curva spline cardinal cerrada, definida por una matriz de estructuras Point, utilizando la tensión especificada.Draws a closed cardinal spline defined by an array of Point structures using a specified tension.

DrawClosedCurve(Pen, PointF[], Single, FillMode) DrawClosedCurve(Pen, PointF[], Single, FillMode) DrawClosedCurve(Pen, PointF[], Single, FillMode)

Dibuja una curva spline cardinal cerrada, definida por una matriz de estructuras PointF, utilizando la tensión especificada.Draws a closed cardinal spline defined by an array of PointF structures using a specified tension.

DrawClosedCurve(Pen, Point[]) DrawClosedCurve(Pen, Point[]) DrawClosedCurve(Pen, Point[])

Dibuja una curva spline cardinal cerrada, definida por una matriz de estructuras Point.Draws a closed cardinal spline defined by an array of Point structures.

DrawClosedCurve(Pen, PointF[]) DrawClosedCurve(Pen, PointF[]) DrawClosedCurve(Pen, PointF[])

Dibuja una curva spline cardinal cerrada, definida por una matriz de estructuras PointF.Draws a closed cardinal spline defined by an array of PointF structures.

DrawClosedCurve(Pen, Point[], Single, FillMode) DrawClosedCurve(Pen, Point[], Single, FillMode) DrawClosedCurve(Pen, Point[], Single, FillMode)

Dibuja una curva spline cardinal cerrada, definida por una matriz de estructuras Point, utilizando la tensión especificada.Draws a closed cardinal spline defined by an array of Point structures using a specified tension.

public:
 void DrawClosedCurve(System::Drawing::Pen ^ pen, cli::array <System::Drawing::Point> ^ points, float tension, System::Drawing::Drawing2D::FillMode fillmode);
public void DrawClosedCurve (System.Drawing.Pen pen, System.Drawing.Point[] points, float tension, System.Drawing.Drawing2D.FillMode fillmode);
member this.DrawClosedCurve : System.Drawing.Pen * System.Drawing.Point[] * single * System.Drawing.Drawing2D.FillMode -> unit

Parámetros

pen
Pen Pen Pen

Pen que determina el color, ancho y alto de la curva.Pen that determines the color, width, and height of the curve.

points
Point[]

Matriz de estructuras Point que definen la curva spline.Array of Point structures that define the spline.

tension
Single Single Single

Valor mayor o igual que 0,0F que especifica la tensión de la curva.Value greater than or equal to 0.0F that specifies the tension of the curve.

fillmode
FillMode FillMode FillMode

Miembro de la enumeración FillMode que determina cómo se rellena la curva.Member of the FillMode enumeration that determines how the curve is filled. Este parámetro es obligatorio, si bien se pasa por alto.This parameter is required but ignored.

Excepciones

pen es null.pen is null.

O bien-or- points es null.points is null.

Ejemplos

El siguiente ejemplo de código está diseñado para su uso con Windows Forms y requiere PaintEventArgs e, que Paint es un parámetro del controlador de eventos.The following code example is designed for use with Windows Forms, and it requires PaintEventArgse, which is a parameter of the Paint event handler. El código realiza las siguientes acciones:The code performs the following actions:

  • Crea bolígrafos rojos y verdes.Creates red and green pens.

  • Crea siete puntos para definir la curva.Creates seven points to define the curve.

  • Dibuja siete líneas rectas rojas entre los siete puntos para formar un polígono.Draws seven red straight lines between the seven points to form a polygon.

  • Crea una configuración de tensión y de modo de relleno.Creates tension and fill mode settings.

  • Dibuja una curva cerrada verde a través de los siete puntos.Draws a green closed curve through the seven points.

El método utiliza una tensión de 1,0 y establece el modo de relleno FillMode.Alternateen.The method uses a tension of 1.0 and sets the fill mode to FillMode.Alternate.

private:
   void DrawClosedCurvePointTension( PaintEventArgs^ e )
   {
      // Create pens.
      Pen^ redPen = gcnew Pen( Color::Red,3.0f );
      Pen^ greenPen = gcnew Pen( Color::Green,3.0f );

      // Create points that define curve.
      Point point1 = Point(50,50);
      Point point2 = Point(100,25);
      Point point3 = Point(200,5);
      Point point4 = Point(250,50);
      Point point5 = Point(300,100);
      Point point6 = Point(350,200);
      Point point7 = Point(250,250);
      array<Point>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Draw lines between original points to screen.
      e->Graphics->DrawLines( redPen, curvePoints );

      // Create tension and fill mode.
      float tension = 1.0F;
      FillMode aFillMode = FillMode::Alternate;

      // Draw closed curve to screen.
      e->Graphics->DrawClosedCurve( greenPen, curvePoints, tension, aFillMode );
   }
private void DrawClosedCurvePointTension(PaintEventArgs e)
{

    // Create pens.
    Pen redPen = new Pen(Color.Red, 3);
    Pen greenPen = new Pen(Color.Green, 3);

    // Create points that define curve.
    Point point1 = new Point(50, 50);
    Point point2 = new Point(100, 25);
    Point point3 = new Point(200, 5);
    Point point4 = new Point(250, 50);
    Point point5 = new Point(300, 100);
    Point point6 = new Point(350, 200);
    Point point7 = new Point(250, 250);
    Point[] curvePoints = {point1, point2, point3, point4, point5, point6, point7};

    // Draw lines between original points to screen.
    e.Graphics.DrawLines(redPen, curvePoints);

    // Create tension and fill mode.
    float tension = 1.0F;
    FillMode aFillMode = FillMode.Alternate;

    // Draw closed curve to screen.
    e.Graphics.DrawClosedCurve(greenPen, curvePoints, tension, aFillMode);
}
Private Sub DrawClosedCurvePointTension(ByVal e As PaintEventArgs)

    ' Create pens.
    Dim redPen As New Pen(Color.Red, 3)
    Dim greenPen As New Pen(Color.Green, 3)

    ' Create points that define curve.
    Dim point1 As New Point(50, 50)
    Dim point2 As New Point(100, 25)
    Dim point3 As New Point(200, 5)
    Dim point4 As New Point(250, 50)
    Dim point5 As New Point(300, 100)
    Dim point6 As New Point(350, 200)
    Dim point7 As New Point(250, 250)
    Dim curvePoints As Point() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Draw lines between original points to screen.
    e.Graphics.DrawLines(redPen, curvePoints)

    ' Create tension and fill mode.
    Dim tension As Single = 1.0F
    Dim aFillMode As FillMode = FillMode.Alternate

    ' Draw closed curve to screen.
    e.Graphics.DrawClosedCurve(greenPen, curvePoints, tension, _
    aFillMode)
End Sub

Comentarios

Este método dibuja una curva spline cardinal cerrada que atraviesa cada punto de la matriz.This method draws a closed cardinal spline that passes through each point in the array. Si el último punto no coincide con el primer punto, se agrega un segmento de curva adicional desde el último punto hasta el primer punto para cerrarlo.If the last point does not match the first point, an additional curve segment is added from the last point to the first point to close it.

La matriz de puntos debe contener al menos cuatro Point estructuras.The array of points must contain at least four Point structures.

El tension parámetro determina la forma de la curva spline.The tension parameter determines the shape of the spline. Si el valor del tension parámetro es 0,0 f, este método dibuja segmentos de línea recta para conectar los puntos.If the value of the tension parameter is 0.0F, this method draws straight line segments to connect the points. Normalmente, el tension parámetro es menor o igual que 1,0 f.Usually, the tension parameter is less than or equal to 1.0F. Los valores superiores a 1.0 F producen resultados poco habituales.Values over 1.0F produce unusual results.

DrawClosedCurve(Pen, PointF[], Single, FillMode) DrawClosedCurve(Pen, PointF[], Single, FillMode) DrawClosedCurve(Pen, PointF[], Single, FillMode)

Dibuja una curva spline cardinal cerrada, definida por una matriz de estructuras PointF, utilizando la tensión especificada.Draws a closed cardinal spline defined by an array of PointF structures using a specified tension.

public:
 void DrawClosedCurve(System::Drawing::Pen ^ pen, cli::array <System::Drawing::PointF> ^ points, float tension, System::Drawing::Drawing2D::FillMode fillmode);
public void DrawClosedCurve (System.Drawing.Pen pen, System.Drawing.PointF[] points, float tension, System.Drawing.Drawing2D.FillMode fillmode);
member this.DrawClosedCurve : System.Drawing.Pen * System.Drawing.PointF[] * single * System.Drawing.Drawing2D.FillMode -> unit

Parámetros

pen
Pen Pen Pen

Pen que determina el color, ancho y alto de la curva.Pen that determines the color, width, and height of the curve.

points
PointF[]

Matriz de estructuras PointF que definen la curva spline.Array of PointF structures that define the spline.

tension
Single Single Single

Valor mayor o igual que 0,0F que especifica la tensión de la curva.Value greater than or equal to 0.0F that specifies the tension of the curve.

fillmode
FillMode FillMode FillMode

Miembro de la enumeración FillMode que determina cómo se rellena la curva.Member of the FillMode enumeration that determines how the curve is filled. Este parámetro es obligatorio, si bien se pasa por alto.This parameter is required but is ignored.

Excepciones

pen es null.pen is null.

o bien-or- points es null.points is null.

Ejemplos

El siguiente ejemplo de código está diseñado para su uso con Windows Forms y requiere PaintEventArgs e, que Paint es un parámetro del controlador de eventos.The following code example is designed for use with Windows Forms, and it requires PaintEventArgse, which is a parameter of the Paint event handler. El código realiza las siguientes acciones:The code performs the following actions:

  • Crea bolígrafos rojos y verdes.Creates red and green pens.

  • Crea siete puntos para definir la curva.Creates seven points to define the curve.

  • Dibuja siete líneas rectas rojas entre los siete puntos para formar un polígono.Draws seven red straight lines between the seven points to form a polygon.

  • Crea una configuración de tensión y de modo de relleno.Creates tension and fill mode settings.

  • Dibuja una curva cerrada verde a través de los siete puntos.Draws a green closed curve through the seven points.

El método utiliza una tensión de 1,0 y establece el modo de relleno FillMode.Alternateen.The method uses a tension of 1.0 and sets the fill mode to FillMode.Alternate.

private:
   void DrawClosedCurvePointFTension( PaintEventArgs^ e )
   {
      // Create pens.
      Pen^ redPen = gcnew Pen( Color::Red,3.0f );
      Pen^ greenPen = gcnew Pen( Color::Green,3.0f );

      // Create points that define curve.
      PointF point1 = PointF(50.0F,50.0F);
      PointF point2 = PointF(100.0F,25.0F);
      PointF point3 = PointF(200.0F,5.0F);
      PointF point4 = PointF(250.0F,50.0F);
      PointF point5 = PointF(300.0F,100.0F);
      PointF point6 = PointF(350.0F,200.0F);
      PointF point7 = PointF(250.0F,250.0F);
      array<PointF>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Draw lines between original points to screen.
      e->Graphics->DrawLines( redPen, curvePoints );

      // Create tension and fill mode.
      float tension = 1.0F;
      FillMode aFillMode = FillMode::Alternate;

      // Draw closed curve to screen.
      e->Graphics->DrawClosedCurve( greenPen, curvePoints, tension, aFillMode );
   }
private void DrawClosedCurvePointFTension(PaintEventArgs e)
{

    // Create pens.
    Pen redPen = new Pen(Color.Red, 3);
    Pen greenPen = new Pen(Color.Green, 3);

    // Create points that define curve.
    PointF point1 = new PointF(50.0F, 50.0F);
    PointF point2 = new PointF(100.0F, 25.0F);
    PointF point3 = new PointF(200.0F, 5.0F);
    PointF point4 = new PointF(250.0F, 50.0F);
    PointF point5 = new PointF(300.0F, 100.0F);
    PointF point6 = new PointF(350.0F, 200.0F);
    PointF point7 = new PointF(250.0F, 250.0F);
    PointF[] curvePoints = {point1, point2, point3, point4, point5, point6, point7};

    // Draw lines between original points to screen.
    e.Graphics.DrawLines(redPen, curvePoints);

    // Create tension and fill mode.
    float tension = 1.0F;
    FillMode aFillMode = FillMode.Alternate;

    // Draw closed curve to screen.
    e.Graphics.DrawClosedCurve(greenPen, curvePoints, tension, aFillMode);
}
Private Sub DrawClosedCurvePointFTension(ByVal e As PaintEventArgs)

    ' Create pens.
    Dim redPen As New Pen(Color.Red, 3)
    Dim greenPen As New Pen(Color.Green, 3)

    ' Create points that define curve.
    Dim point1 As New PointF(50.0F, 50.0F)
    Dim point2 As New PointF(100.0F, 25.0F)
    Dim point3 As New PointF(200.0F, 5.0F)
    Dim point4 As New PointF(250.0F, 50.0F)
    Dim point5 As New PointF(300.0F, 100.0F)
    Dim point6 As New PointF(350.0F, 200.0F)
    Dim point7 As New PointF(250.0F, 250.0F)
    Dim curvePoints As PointF() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Draw lines between original points to screen.
    e.Graphics.DrawLines(redPen, curvePoints)

    ' Create tension and fill mode.
    Dim tension As Single = 1.0F
    Dim aFillMode As FillMode = FillMode.Alternate

    ' Draw closed curve to screen.
    e.Graphics.DrawClosedCurve(greenPen, curvePoints, tension, _
    aFillMode)
End Sub

Comentarios

Este método dibuja una curva spline cardinal cerrada que atraviesa cada punto de la matriz.This method draws a closed cardinal spline that passes through each point in the array. Si el último punto no coincide con el primer punto, se agrega un segmento de curva adicional desde el último punto hasta el primer punto para cerrarlo.If the last point does not match the first point, an additional curve segment is added from the last point to the first point to close it.

La matriz de puntos debe contener al menos cuatro PointF estructuras.The array of points must contain at least four PointF structures.

El tension parámetro determina la forma de la curva spline.The tension parameter determines the shape of the spline. Si el valor del tension parámetro es 0,0 f, este método dibuja segmentos de línea recta para conectar los puntos.If the value of the tension parameter is 0.0F, this method draws straight line segments to connect the points. Normalmente, el tension parámetro es menor o igual que 1,0 f.Usually, the tension parameter is less than or equal to 1.0F. Los valores superiores a 1.0 F producen resultados poco habituales.Values over 1.0F produce unusual results.

DrawClosedCurve(Pen, Point[]) DrawClosedCurve(Pen, Point[]) DrawClosedCurve(Pen, Point[])

Dibuja una curva spline cardinal cerrada, definida por una matriz de estructuras Point.Draws a closed cardinal spline defined by an array of Point structures.

public:
 void DrawClosedCurve(System::Drawing::Pen ^ pen, cli::array <System::Drawing::Point> ^ points);
public void DrawClosedCurve (System.Drawing.Pen pen, System.Drawing.Point[] points);
member this.DrawClosedCurve : System.Drawing.Pen * System.Drawing.Point[] -> unit

Parámetros

pen
Pen Pen Pen

Pen que determina el color, ancho y alto de la curva.Pen that determines the color, width, and height of the curve.

points
Point[]

Matriz de estructuras Point que definen la curva spline.Array of Point structures that define the spline.

Excepciones

pen es null.pen is null.

o bien-or- points es null.points is null.

Ejemplos

El siguiente ejemplo de código está diseñado para su uso con Windows Forms y requiere PaintEventArgs e, que Paint es un parámetro del controlador de eventos.The following code example is designed for use with Windows Forms, and it requires PaintEventArgse, which is a parameter of the Paint event handler. El código realiza las siguientes acciones:The code performs the following actions:

  • Crea bolígrafos rojos y verdes.Creates red and green pens.

  • Crea siete puntos para definir una curva.Creates seven points to define a curve.

  • Dibuja siete líneas rectas rojas entre los siete puntos para formar un polígono cerrado.Draws seven red straight lines between the seven points to form a closed polygon.

  • Dibuja una curva cerrada verde a través de los siete puntos.Draws a green closed curve through the seven points.

El método usa una tensión predeterminada de 0,5.The method uses a default tension of 0.5.

private:
   void DrawClosedCurvePoint( PaintEventArgs^ e )
   {

      // Create pens.
      Pen^ redPen = gcnew Pen( Color::Red,3.0f );
      Pen^ greenPen = gcnew Pen( Color::Green,3.0f );

      // Create points that define curve.
      Point point1 = Point(50,50);
      Point point2 = Point(100,25);
      Point point3 = Point(200,5);
      Point point4 = Point(250,50);
      Point point5 = Point(300,100);
      Point point6 = Point(350,200);
      Point point7 = Point(250,250);
      array<Point>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Draw lines between original points to screen.
      e->Graphics->DrawLines( redPen, curvePoints );

      // Draw closed curve to screen.
      e->Graphics->DrawClosedCurve( greenPen, curvePoints );
   }
private void DrawClosedCurvePoint(PaintEventArgs e)
{
    // Create pens.
    Pen redPen   = new Pen(Color.Red, 3);
    Pen greenPen = new Pen(Color.Green, 3);
             
    // Create points that define curve.
    Point point1 = new Point(50,  50);
    Point point2 = new Point(100,  25);
    Point point3 = new Point(200,   5);
    Point point4 = new Point(250,  50);
    Point point5 = new Point(300, 100);
    Point point6 = new Point(350, 200);
    Point point7 = new Point(250, 250);
    Point[] curvePoints =
             {
                 point1,
                 point2,
                 point3,
                 point4,
                 point5,
                 point6,
                 point7
             };
             
    // Draw lines between original points to screen.
    e.Graphics.DrawLines(redPen, curvePoints);
             
    // Draw closed curve to screen.
    e.Graphics.DrawClosedCurve(greenPen, curvePoints);
}
Private Sub DrawClosedCurvePoint(ByVal e As PaintEventArgs)

    ' Create pens.
    Dim redPen As New Pen(Color.Red, 3)
    Dim greenPen As New Pen(Color.Green, 3)

    ' Create points that define curve.
    Dim point1 As New Point(50, 50)
    Dim point2 As New Point(100, 25)
    Dim point3 As New Point(200, 5)
    Dim point4 As New Point(250, 50)
    Dim point5 As New Point(300, 100)
    Dim point6 As New Point(350, 200)
    Dim point7 As New Point(250, 250)
    Dim curvePoints As Point() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Draw lines between original points to screen.
    e.Graphics.DrawLines(redPen, curvePoints)

    ' Draw closed curve to screen.
    e.Graphics.DrawClosedCurve(greenPen, curvePoints)
End Sub

Comentarios

Este método dibuja una curva spline cardinal cerrada que atraviesa cada punto de la matriz.This method draws a closed cardinal spline that passes through each point in the array. Si el último punto no coincide con el primer punto, se agrega un segmento de curva adicional desde el último punto hasta el primer punto para cerrar la figura.If the last point does not match the first point, an additional curve segment is added from the last point to the first point to close the figure.

La matriz de puntos debe contener al menos cuatro Point estructuras.The array of points must contain at least four Point structures.

Este método usa una tensión predeterminada de 0,5.This method uses a default tension of 0.5.

DrawClosedCurve(Pen, PointF[]) DrawClosedCurve(Pen, PointF[]) DrawClosedCurve(Pen, PointF[])

Dibuja una curva spline cardinal cerrada, definida por una matriz de estructuras PointF.Draws a closed cardinal spline defined by an array of PointF structures.

public:
 void DrawClosedCurve(System::Drawing::Pen ^ pen, cli::array <System::Drawing::PointF> ^ points);
public void DrawClosedCurve (System.Drawing.Pen pen, System.Drawing.PointF[] points);
member this.DrawClosedCurve : System.Drawing.Pen * System.Drawing.PointF[] -> unit

Parámetros

pen
Pen Pen Pen

Pen que determina el color, ancho y alto de la curva.Pen that determines the color, width, and height of the curve.

points
PointF[]

Matriz de estructuras PointF que definen la curva spline.Array of PointF structures that define the spline.

Excepciones

pen es null.pen is null.

O bien-or- points es null.points is null.

Ejemplos

El siguiente ejemplo de código está diseñado para su uso con Windows Forms y requiere PaintEventArgs e, que Paint es un parámetro del controlador de eventos.The following code example is designed for use with Windows Forms, and it requires PaintEventArgse, which is a parameter of the Paint event handler. El código realiza las siguientes acciones:The code performs the following actions:

  • Crea bolígrafos rojos y verdes.Creates red and green pens.

  • Crea siete puntos para definir una curva.Creates seven points to define a curve.

  • Dibuja siete líneas rectas rojas entre los siete puntos para formar un polígono cerrado.Draws seven red straight lines between the seven points to form a closed polygon.

  • Dibuja una curva cerrada verde a través de los siete puntos.Draws a green closed curve through the seven points.

El método usa una tensión predeterminada de 0,5.The method uses a default tension of 0.5.

private:
   void DrawClosedCurvePointF( PaintEventArgs^ e )
   {
      // Create pens.
      Pen^ redPen = gcnew Pen( Color::Red,3.0f );
      Pen^ greenPen = gcnew Pen( Color::Green,3.0f );

      // Create points that define curve.
      PointF point1 = PointF(50.0F,50.0F);
      PointF point2 = PointF(100.0F,25.0F);
      PointF point3 = PointF(200.0F,5.0F);
      PointF point4 = PointF(250.0F,50.0F);
      PointF point5 = PointF(300.0F,100.0F);
      PointF point6 = PointF(350.0F,200.0F);
      PointF point7 = PointF(250.0F,250.0F);
      array<PointF>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Draw lines between original points to screen.
      e->Graphics->DrawLines( redPen, curvePoints );

      // Draw closed curve to screen.
      e->Graphics->DrawClosedCurve( greenPen, curvePoints );
   }
private void DrawClosedCurvePointF(PaintEventArgs e)
{

    // Create pens.
    Pen redPen = new Pen(Color.Red, 3);
    Pen greenPen = new Pen(Color.Green, 3);

    // Create points that define curve.
    PointF point1 = new PointF(50.0F, 50.0F);
    PointF point2 = new PointF(100.0F, 25.0F);
    PointF point3 = new PointF(200.0F, 5.0F);
    PointF point4 = new PointF(250.0F, 50.0F);
    PointF point5 = new PointF(300.0F, 100.0F);
    PointF point6 = new PointF(350.0F, 200.0F);
    PointF point7 = new PointF(250.0F, 250.0F);
    PointF[] curvePoints = {point1, point2, point3, point4, point5, point6, point7};

    // Draw lines between original points to screen.
    e.Graphics.DrawLines(redPen, curvePoints);

    // Draw closed curve to screen.
    e.Graphics.DrawClosedCurve(greenPen, curvePoints);
}
Private Sub DrawClosedCurvePointF(ByVal e As PaintEventArgs)

    ' Create pens.
    Dim redPen As New Pen(Color.Red, 3)
    Dim greenPen As New Pen(Color.Green, 3)

    ' Create points that define curve.
    Dim point1 As New PointF(50.0F, 50.0F)
    Dim point2 As New PointF(100.0F, 25.0F)
    Dim point3 As New PointF(200.0F, 5.0F)
    Dim point4 As New PointF(250.0F, 50.0F)
    Dim point5 As New PointF(300.0F, 100.0F)
    Dim point6 As New PointF(350.0F, 200.0F)
    Dim point7 As New PointF(250.0F, 250.0F)
    Dim curvePoints As PointF() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Draw lines between original points to screen.
    e.Graphics.DrawLines(redPen, curvePoints)

    ' Draw closed curve to screen.
    e.Graphics.DrawClosedCurve(greenPen, curvePoints)
End Sub

Comentarios

Este método dibuja una curva spline cardinal cerrada que atraviesa cada punto de la matriz.This method draws a closed cardinal spline that passes through each point in the array. Si el último punto no coincide con el primer punto, se agrega un segmento de curva adicional desde el último punto hasta el primer punto para cerrarlo.If the last point does not match the first point, an additional curve segment is added from the last point to the first point to close it.

La matriz de puntos debe contener al menos cuatro PointF estructuras.The array of points must contain at least four PointF structures.

Este método usa una tensión predeterminada de 0,5.This method uses a default tension of 0.5.

Se aplica a