Add-AzLoadBalancerInboundNatRuleConfig
Adds an inbound NAT rule configuration to a load balancer.
Syntax
Add-AzLoadBalancerInboundNatRuleConfig
-LoadBalancer <PSLoadBalancer>
-Name <String>
[-Protocol <String>]
[-FrontendPort <Int32>]
[-BackendPort <Int32>]
[-IdleTimeoutInMinutes <Int32>]
[-EnableFloatingIP]
[-EnableTcpReset]
[-FrontendIpConfiguration <PSFrontendIPConfiguration>]
[-FrontendPortRangeStart <Int32>]
[-FrontendPortRangeEnd <Int32>]
[-BackendAddressPool <PSBackendAddressPool>]
[-DefaultProfile <IAzureContextContainer>]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Add-AzLoadBalancerInboundNatRuleConfig
-LoadBalancer <PSLoadBalancer>
-Name <String>
[-Protocol <String>]
[-FrontendPort <Int32>]
[-BackendPort <Int32>]
[-IdleTimeoutInMinutes <Int32>]
[-EnableFloatingIP]
[-EnableTcpReset]
[-FrontendIpConfigurationId <String>]
[-FrontendPortRangeStart <Int32>]
[-FrontendPortRangeEnd <Int32>]
[-BackendAddressPoolId <String>]
[-DefaultProfile <IAzureContextContainer>]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
The Add-AzLoadBalancerInboundNatRuleConfig cmdlet adds an inbound network address translation (NAT) rule configuration to an Azure load balancer.
Examples
Example 1: Add an inbound NAT rule configuration to a load balancer
$slb = Get-AzLoadBalancer -Name "MyLoadBalancer" -ResourceGroupName "MyResourceGroup"
$slb | Add-AzLoadBalancerInboundNatRuleConfig -Name "NewNatRule" -FrontendIPConfiguration $slb.FrontendIpConfigurations[0] -Protocol "Tcp" -FrontendPort 3350 -BackendPort 3350 -EnableFloatingIP
$slb | Set-AzLoadBalancer
The first command gets the load balancer named MyloadBalancer, and then stores it in the variable $slb. The second command uses the pipeline operator to pass the load balancer in $slb to Add-AzLoadBalancerInboundNatRuleConfig, which adds an inbound NAT rule configuration to the load balancer. The last command sets the configuration to the loadbalancer, if you don't perform Set-AzLoadBalancer, your changes will not be applied to the loadbalancer.
Example 2: Add an inbound NAT rule V2 configuration to a load balancer
$slb = Get-AzLoadBalancer -Name "MyLoadBalancer" -ResourceGroupName "MyResourceGroup"
$slb | Add-AzLoadBalancerInboundNatRuleConfig -Name "NewNatRuleV2" -FrontendIPConfiguration $slb.FrontendIpConfigurations[0] -Protocol "Tcp" -IdleTimeoutInMinutes 10 -FrontendPortRangeStart 3389 -FrontendPortRangeEnd 4000 -BackendAddressPool $slb.BackendAddressPools[0] -BackendPort 3389
$slb | Set-AzLoadBalancer
The first command gets the load balancer named MyloadBalancer, and then stores it in the variable $slb. The second command uses the pipeline operator to pass the load balancer in $slb to Add-AzLoadBalancerInboundNatRuleConfig, which adds an inbound NAT rule V2 configuration to the load balancer. The last command sets the configuration to the loadbalancer, if you don't perform Set-AzLoadBalancer, your changes will not be applied to the loadbalancer.
Parameters
-BackendAddressPool
Specifies the backend address pool to associate with an inbound NAT rule configuration.
Type: | PSBackendAddressPool |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-BackendAddressPoolId
Specifies the ID of a BackendAddressPool object to associate with an inbound NAT rule configuration.
Type: | String |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-BackendPort
Specifies the backend port for traffic matched by a rule configuration.
Type: | Int32 |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
Type: | SwitchParameter |
Aliases: | cf |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-DefaultProfile
The credentials, account, tenant, and subscription used for communication with azure.
Type: | IAzureContextContainer |
Aliases: | AzContext, AzureRmContext, AzureCredential |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-EnableFloatingIP
Indicates that this cmdlet enables a floating IP address for a rule configuration.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-EnableTcpReset
Receive bidirectional TCP Reset on TCP flow idle timeout or unexpected connection termination. This element is only used when the protocol is set to TCP.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-FrontendIpConfiguration
Specifies a list of front-end IP addresses to associate with an inbound NAT rule configuration.
Type: | PSFrontendIPConfiguration |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-FrontendIpConfigurationId
Specifies an ID for a front-end IP address configuration.
Type: | String |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-FrontendPort
Specifies the front-end port that is matched by a rule configuration.
Type: | Int32 |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-FrontendPortRangeEnd
Specifies the last port number in the range of external ports that is used by a rule configuration. Acceptable values range between 1 and 65535.
Type: | Nullable<T>[Int32] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-FrontendPortRangeStart
Specifies the first port number in the range of external ports that is used by a rule configuration. Acceptable values range between 1 and 65534.
Type: | Nullable<T>[Int32] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-IdleTimeoutInMinutes
Specifies the length of time, in minutes, that the state of conversations is maintained in a load balancer.
Type: | Int32 |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-LoadBalancer
Specifies a LoadBalancer object. This cmdlet adds an inbound NAT rule configuration to the load balancer that this parameter specifies.
Type: | PSLoadBalancer |
Position: | Named |
Default value: | None |
Required: | True |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-Name
Specifies the name of the inbound NAT rule configuration to add.
Type: | String |
Position: | Named |
Default value: | None |
Required: | True |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-Protocol
Specifies the protocol that is matched by an inbound NAT rule. The acceptable values for this parameter are: Tcp or Udp.
Type: | String |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Type: | SwitchParameter |
Aliases: | wi |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Inputs
Outputs
Related Links
Commentaires
https://aka.ms/ContentUserFeedback.
Bientôt disponible : Tout au long de 2024, nous allons supprimer progressivement GitHub Issues comme mécanisme de commentaires pour le contenu et le remplacer par un nouveau système de commentaires. Pour plus d’informations, consultezEnvoyer et afficher des commentaires pour