ערוך

שתף באמצעות


React to IoT Hub events by using Event Grid to trigger actions

Azure IoT Hub integrates with Azure Event Grid so that you can send event notifications to other services and trigger downstream processes. Configure your business applications to listen for IoT Hub events so that you can react to critical events in a reliable, scalable, and secure manner. For example, build an application that updates a database, creates a work ticket, and delivers an email notification every time a new IoT device is registered to your IoT hub.

Azure Event Grid is a fully managed event routing service that uses a publish-subscribe model. Event Grid has built-in support for Azure services like Azure Functions and Azure Logic Apps, and can deliver event alerts to non-Azure services using webhooks. For a complete list of the event handlers that Event Grid supports, see An introduction to Azure Event Grid.

To watch a video discussing this integration, see Azure IoT Hub integration with Azure Event Grid.

Diagram that shows Azure Event Grid architecture.

Regional availability

The Event Grid integration is available for IoT hubs located in the regions where Event Grid is supported. For the latest list of regions, see Products available by region.

Event types

IoT Hub publishes the following event types:

Event type Description
Microsoft.Devices.DeviceCreated Published when a device is registered to an IoT hub.
Microsoft.Devices.DeviceDeleted Published when a device is deleted from an IoT hub.
Microsoft.Devices.DeviceConnected Published when a device is connected to an IoT hub.
Microsoft.Devices.DeviceDisconnected Published when a device is disconnected from an IoT hub.
Microsoft.Devices.DeviceTelemetry Published when a device telemetry message is sent to an IoT hub

Use either the Azure portal or Azure CLI to configure which events to publish from each IoT hub. For an example, try the tutorial Send email notifications about Azure IoT Hub events using Logic Apps.

Event schema

IoT Hub events contain all the information you need to respond to changes in your device lifecycle. You can identify an IoT Hub event by checking that the eventType property starts with Microsoft.Devices. For more information about how to use Event Grid event properties, see the Event Grid event schema.

Device connected schema

The following example shows the schema of a device connected event:

[{  
  "id": "f6bbf8f4-d365-520d-a878-17bf7238abd8",
  "topic": "/SUBSCRIPTIONS/<subscription ID>/RESOURCEGROUPS/<resource group name>/PROVIDERS/MICROSOFT.DEVICES/IOTHUBS/<hub name>",
  "subject": "devices/LogicAppTestDevice",
  "eventType": "Microsoft.Devices.DeviceConnected",
  "eventTime": "2018-06-02T19:17:44.4383997Z",
  "data": {
      "deviceConnectionStateEventInfo": {
        "sequenceNumber":
          "000000000000000001D4132452F67CE200000002000000000000000000000001"
      },
    "hubName": "egtesthub1",
    "deviceId": "LogicAppTestDevice",
    "moduleId" : "DeviceModuleID",
  }, 
  "dataVersion": "1",
  "metadataVersion": "1"
}]

Device telemetry schema

Device telemetry messages must be in a valid JSON format with the contentType set to application/json and contentEncoding set to UTF-8 in the message system properties. Both of these properties are case insensitive. If the content encoding is not set, then IoT Hub writes the messages in base 64 encoded format.

You can enrich device telemetry events before they're published to Event Grid by selecting the endpoint as Event Grid. For more information, see message enrichments.

The following example shows the schema of a device telemetry event:

[{  
  "id": "9af86784-8d40-fe2g-8b2a-bab65e106785",
  "topic": "/SUBSCRIPTIONS/<subscription ID>/RESOURCEGROUPS/<resource group name>/PROVIDERS/MICROSOFT.DEVICES/IOTHUBS/<hub name>",
  "subject": "devices/LogicAppTestDevice",
  "eventType": "Microsoft.Devices.DeviceTelemetry",
  "eventTime": "2019-01-07T20:58:30.48Z",
  "data": {
      "body": {
          "Weather": {
              "Temperature": 900
            },
            "Location": "USA"
        },
        "properties": {
            "Status": "Active"
        },
        "systemProperties": {
          "iothub-content-type": "application/json",
          "iothub-content-encoding": "utf-8",
          "iothub-connection-device-id": "d1",
          "iothub-connection-auth-method": "{\"scope\":\"device\",\"type\":\"sas\",\"issuer\":\"iothub\",\"acceptingIpFilterRule\":null}",
          "iothub-connection-auth-generation-id": "123455432199234570",
          "iothub-enqueuedtime": "2019-01-07T20:58:30.48Z",
          "iothub-message-source": "Telemetry"
        }
  },
  "dataVersion": "",
  "metadataVersion": "1"
}]

Device created schema

The following example shows the schema of a device created event:

[{
  "id": "56afc886-767b-d359-d59e-0da7877166b2",
  "topic": "/SUBSCRIPTIONS/<subscription ID>/RESOURCEGROUPS/<resource group name>/PROVIDERS/MICROSOFT.DEVICES/IOTHUBS/<hub name>",
  "subject": "devices/LogicAppTestDevice",
  "eventType": "Microsoft.Devices.DeviceCreated",
  "eventTime": "2018-01-02T19:17:44.4383997Z",
  "data": {
    "twin": {
      "deviceId": "LogicAppTestDevice",
      "etag": "AAAAAAAAAAE=",
      "deviceEtag":"null",
      "status": "enabled",
      "statusUpdateTime": "0001-01-01T00:00:00",
      "connectionState": "Disconnected",
      "lastActivityTime": "0001-01-01T00:00:00",
      "cloudToDeviceMessageCount": 0,
      "authenticationType": "sas",
      "x509Thumbprint": {
        "primaryThumbprint": null,
        "secondaryThumbprint": null
      },
      "version": 2,
      "properties": {
        "desired": {
          "$metadata": {
            "$lastUpdated": "2018-01-02T19:17:44.4383997Z"
          },
          "$version": 1
        },
        "reported": {
          "$metadata": {
            "$lastUpdated": "2018-01-02T19:17:44.4383997Z"
          },
          "$version": 1
        }
      }
    },
    "hubName": "egtesthub1",
    "deviceId": "LogicAppTestDevice"
  },
  "dataVersion": "1",
  "metadataVersion": "1"
}]

Warning

Twin data associated with a device creation event is a default configuration and shouldn't be relied on for actual authenticationType and other device properties in a newly created device. For authenticationType and other device properties in a newly created device, use the register manager API provided in the Azure IoT SDKs.

For a detailed description of each property, see Azure Event Grid event schema for IoT Hub.

Filter events

Event Grid enables filtering on event types, subjects, and data content. While creating the Event Grid subscription, you can choose to subscribe to selected IoT events.

  • Event type: For the list of IoT Hub event types, see event types.
  • Subject: For IoT Hub events, the subject is the device name. The subject takes the format devices/{deviceId}. You can filter subjects based on Begins With (prefix) and Ends With (suffix) matches. The filter uses an AND operator, so events with a subject that match both the prefix and suffix are delivered to the subscriber.
  • Data content: The data content is populated by IoT Hub using the message format. You can choose what events are delivered based on the contents of the telemetry message. For examples, see advanced filtering. For filtering on the telemetry message body, you must set the contentType to application/json and contentEncoding to UTF-8 in the message system properties. Both of these properties are case insensitive.

For device telemetry events, IoT Hub will create the default message route called RouteToEventGrid based on the subscription. To filter messages before telemetry data is sent, update the routing query.

Limitations for device connection state events

Device connected and device disconnected events are available for devices connecting using either the MQTT or AMQP protocol, or using either of these protocols over WebSockets. Requests made only with HTTPS won't trigger device connection state notifications.

For information about monitoring device status with Event Grid, see Monitor device connection status.

Device connection state interval

IoT Hub attempts to report each device connection state change event, but some may be missed. At minimum, IoT Hub reports connection state change events that occur 60 seconds apart from each other. This behavior may lead to outcomes such as multiple device connect events reported with no device disconnect events between them.

Tips for consuming events

Applications that handle IoT Hub events should follow these suggested practices:

  • Multiple subscriptions can be configured to route events to the same event handler, so don't assume that events are from a particular source. Always check the message topic to ensure that it comes from the IoT hub that you expect.
  • Don't assume that all events you receive are the types that you expect. Always check the eventType before processing the message.
  • Messages can arrive out of order or after a delay. Use the etag field to understand if your information about objects is up to date for device created or device-deleted events.

Next steps