Share via


Create a C++ extension for Python

Applies to: yesVisual Studio noVisual Studio for Mac

Note

This article applies to Visual Studio 2017. If you're looking for the latest Visual Studio documentation, see Visual Studio documentation. We recommend upgrading to the latest version of Visual Studio. Download it here

Commonly, modules written in C++ (or C) are used to extend the capabilities of a Python interpreter. You can also use them to enable access to low-level operating system capabilities.

Modules come in three primary types:

  • Accelerator modules: Because Python is an interpreted language, you can write accelerator modules in C++ for higher performance.
  • Wrapper modules: These modules expose existing C/C++ interfaces to Python code or expose a more "pythonic" API that's easy to use from Python.
  • Low-level system access modules: You can create these modules to access lower-level features of the CPython runtime, the operating system, or the underlying hardware.

This article walks you through building a C++ extension module for CPython that computes a hyperbolic tangent and calls it from Python code. The routine is implemented first in Python to demonstrate the relative performance gain of implementing the same routine in C++.

The article also demonstrates two ways to make the C++ extension available to Python:

  • Use the standard CPython extensions, as described in the Python documentation.
  • Use PyBind11, which we recommend for C++11 because of its simplicity. To ensure compatibility, make sure that you are working with one of the more recent versions of Python.

You'll find the completed sample from this walkthrough on GitHub at python-samples-vs-cpp-extension.

Prerequisites

  • Visual Studio 2017 or later, with the Python Development workload installed. The workload includes the Python native development tools, which bring in the C++ workload and toolsets that are necessary for native extensions.

    Screenshot of a list of Python development options, highlighting the Python native development tools option.

    Note

    When you install the Data science and analytical applications workload, Python and the Python native development tools option are installed by default.

For more information about the installation options, see Install Python support for Visual Studio. If you install Python separately, be sure to select Download debugging symbols under Advanced Options in its installer. This option is required for you to use mixed-mode debugging between your Python code and native code.

Create the Python application

  1. Create a new Python project in Visual Studio by selecting File > New > Project.

  2. Search for Python, select the Python Application template, enter a name and location, and then select OK.

  3. In the project's .py file, paste the following code. To experience some of the Python editing features, try entering the code manually.

    This code computes a hyperbolic tangent without using the math library, and it's what you'll be accelerating with native extensions.

    Tip

    Write your code in pure Python before you rewrite it in C++. This way, you can more easily check to ensure that your native code is correct.

    from random import random
    from time import perf_counter
    
    COUNT = 500000  # Change this value depending on the speed of your computer
    DATA = [(random() - 0.5) * 3 for _ in range(COUNT)]
    
    e = 2.7182818284590452353602874713527
    
    def sinh(x):
        return (1 - (e ** (-2 * x))) / (2 * (e ** -x))
    
    def cosh(x):
        return (1 + (e ** (-2 * x))) / (2 * (e ** -x))
    
    def tanh(x):
        tanh_x = sinh(x) / cosh(x)
        return tanh_x
    
    def test(fn, name):
        start = perf_counter()
        result = fn(DATA)
        duration = perf_counter() - start
        print('{} took {:.3f} seconds\n\n'.format(name, duration))
    
        for d in result:
            assert -1 <= d <= 1, " incorrect values"
    
    if __name__ == "__main__":
        print('Running benchmarks with COUNT = {}'.format(COUNT))
    
        test(lambda d: [tanh(x) for x in d], '[tanh(x) for x in d] (Python implementation)')
    
  4. To view the results, run the program by selecting Debug > Start without Debugging or by selecting Ctrl+F5.

    You can adjust the COUNT variable to change how long the benchmark runs. For this walkthrough, set the count so that the benchmark takes about two seconds.

    Tip

    When you run benchmarks, always use Debug > Start without Debugging. This helps avoid the overhead that you incur when you run the code within the Visual Studio debugger.

Create the core C++ projects

Follow the instructions in this section to create two identical C++ projects, superfastcode and superfastcode2. Later, you'll use a separate approach in each project to expose the C++ code to Python.

  1. In Solution Explorer, right-click the solution, and then select Add > New Project. A Visual Studio solution can contain both Python and C++ projects, which is one of the advantages of using Visual Studio for Python.

  2. Search on C++, select Empty project, specify either superfastcode for the first project or superfastcode2 for the second project, and then select OK.

    Tip

    Alternatively, with the Python native development tools installed in Visual Studio, you can start with the Python Extension Module template. The template has much of what's described here already in place.

    For this walkthrough, though, starting with an empty project demonstrates building the extension module step by step. After you understand the process, you can use the template to save time when you write your own extensions.

  3. To create a C++ file in the new project, right-click the Source Files node, and then select Add > New Item.

  4. Select C++ File, name it module.cpp, and then select OK.

    Important

    A file with the .cpp extension is necessary to turn on the C++ property pages in the steps that follow.

  5. On the main toolbar, use the dropdown menu to select either of the following configurations:

    • For a 64-bit Python runtime, activate the x64 configuration.
    • For a 32-bit Python runtime, activate the Win32 configuration.
  6. In Solution Explorer, right-click the C++ project, select Properties, and then do the following:

    a. For Configuration, enter Active (Debug).
    b. For Platform, enter either Active (x64) or Active (Win32), depending on your selection in the preceding step.

    Note

    When you create your own projects, you'll want to configure both the debug and release configurations. In this unit, you're configuring only the debug configuration and setting it to use a release build of CPython. This configuration disables some debugging features of the C++ runtime, including assertions. Using CPython debug binaries (python_d.exe) requires different settings.

  7. Set the properties as described in the following table:

    Tab Property Value
    General General > Target Name Specify the name of the module to refer to it from Python in from...import statements. You use this same name in the C++ code when you define the module for Python. To use the name of the project as the module name, leave the default value of $<ProjectName>. For python_d.exe, add _d to the end of the name.
    General > Target Extension .pyd
    Project Defaults > Configuration Type Dynamic Library (.dll)
    C/C++ > General Additional Include Directories Add the Python include folder, as appropriate for your installation (for example, c:\Python36\include).
    C/C++ > Preprocessor Preprocessor Definitions If it's present, change the _DEBUG value to NDEBUG to match the non-debug version of CPython. When you're using python_d.exe, leave this value unchanged.
    C/C++ > Code Generation Runtime Library Multi-threaded DLL (/MD) to match the non-debug version of CPython. When you're using python_d.exe, leave this value unchanged.
    Linker > General Additional Library Directories Add the Python libs folder that contains .lib files, as appropriate for your installation (for example, c:\Python36\libs). Be sure to point to the libs folder that contains .lib files, and not the Lib folder that contains .py files.

    Note

    If the C/C++ tab isn't displayed in the project properties, the project contains no files that identifies as C/C++ source files. This condition can occur if you create a source file without a .c or .cpp file extension.

    For example, if you accidentally entered module.coo instead of module.cpp earlier in the new item dialog, Visual Studio creates the file but doesn't set the file type to C/C+ Code, which activates the C/C++ properties tab. Such misidentification remains even if you rename the file with a .cpp file extension.

    To set the file type properly, in Solution Explorer, right-click the file and select Properties. Then, for File Type, select C/C++ Code.

  8. Select OK.

  9. To test your configurations (both debug and release), right-click the C++ project, and then select Build.

    You'll find the .pyd files in the solution folder, under Debug and Release, not in the C++ project folder itself.

  10. In the C++ project's module.cpp file, add the following code:

    #include <Windows.h>
    #include <cmath>
    
    const double e = 2.7182818284590452353602874713527;
    
    double sinh_impl(double x) {
        return (1 - pow(e, (-2 * x))) / (2 * pow(e, -x));
    }
    
    double cosh_impl(double x) {
        return (1 + pow(e, (-2 * x))) / (2 * pow(e, -x));
    }
    
    double tanh_impl(double x) {
        return sinh_impl(x) / cosh_impl(x);
    }
    
  11. Build the C++ project again to confirm that your code is correct.

  12. If you haven't already done so, repeat the preceding steps to create a second project named superfastcode2 with an identical configuration.

Convert the C++ projects to extensions for Python

To make the C++ DLL an extension for Python, first modify the exported methods to interact with Python types. Then, add a function that exports the module, along with definitions of the module's methods.

The sections that follow explain how you perform these steps by using both the CPython extensions and PyBind11.

Use CPython extensions

For more background on the code shown in this section, see the Python/C API Reference Manual and, especially, the Module Objects page. Be sure to select your version of Python in the dropdown list at the upper right.

  1. At the top of the module.cpp file, include Python.h:

    #include <Python.h>
    
  2. Modify the tanh_impl method to accept and return Python types (that is, a PyObject*):

    PyObject* tanh_impl(PyObject* /* unused module reference */, PyObject* o) {
        double x = PyFloat_AsDouble(o);
        double tanh_x = sinh_impl(x) / cosh_impl(x);
        return PyFloat_FromDouble(tanh_x);
    }
    
  3. Add a structure that defines how the C++ tanh_impl function is presented to Python:

    static PyMethodDef superfastcode_methods[] = {
        // The first property is the name exposed to Python, fast_tanh
        // The second is the C++ function with the implementation
        // METH_O means it takes a single PyObject argument
        { "fast_tanh", (PyCFunction)tanh_impl, METH_O, nullptr },
    
        // Terminate the array with an object containing nulls.
        { nullptr, nullptr, 0, nullptr }
    };
    
  4. Add a structure that defines the module as you want to refer to it in your Python code, specifically when you use the from...import statement.

    The name that's being imported in this code should match the value in the project properties under Configuration Properties > General > Target Name.

    In the following example, the "superfastcode" module name means that you can use from superfastcode import fast_tanh in Python, because fast_tanh is defined within superfastcode_methods. File names that are internal to the C++ project, such as module.cpp, are inconsequential.

    static PyModuleDef superfastcode_module = {
        PyModuleDef_HEAD_INIT,
        "superfastcode",                        // Module name to use with Python import statements
        "Provides some functions, but faster",  // Module description
        0,
        superfastcode_methods                   // Structure that defines the methods of the module
    };
    
  5. Add a method that Python calls when it loads the module, which must be named PyInit_<module-name>, where <module-name> exactly matches the C++ project's General > Target Name property. That is, it matches the file name of the .pyd file that's built by the project.

    PyMODINIT_FUNC PyInit_superfastcode() {
        return PyModule_Create(&superfastcode_module);
    }
    
  6. Build the C++ project again to verify your code. If you come across errors, see the "Troubleshooting" section.

Use PyBind11

If you've completed the steps in the previous section, you likely noticed that you used lots of boilerplate codes to create the necessary module structures for the C++ code. PyBind11 simplifies the process through macros in a C++ header file that accomplishes the same result, but with much less code.

For more information about the code in this section, see PyBind11 basics.

  1. Install PyBind11 by using pip: pip install pybind11 or py -m pip install pybind11.

    Alternatively, you can install PyBind11 by using the Python Environments window, and then use its Open in PowerShell command for the next step.

  2. In the same terminal, run python -m pybind11 --includes or py -m pybind11 --includes.

    This action prints a list of paths that you should add to your project's C/C++ > General > Additional Include Directories property. Be sure to remove the -I prefix, if it's present.

  3. At the top of a fresh module.cpp that doesn't include any of the changes from the previous section, include pybind11.h:

    #include <pybind11/pybind11.h>
    
  4. At the bottom of module.cpp, use the PYBIND11_MODULE macro to define the entry point to the C++ function:

    namespace py = pybind11;
    
    PYBIND11_MODULE(superfastcode2, m) {
        m.def("fast_tanh2", &tanh_impl, R"pbdoc(
            Compute a hyperbolic tangent of a single argument expressed in radians.
        )pbdoc");
    
    #ifdef VERSION_INFO
        m.attr("__version__") = VERSION_INFO;
    #else
        m.attr("__version__") = "dev";
    #endif
    }
    
  5. Build the C++ project to verify your code. If you encounter errors, see the next section, "Troubleshoot compiling failures," for solutions.

Troubleshoot compiling failures

The C++ module might fail to compile for the following reasons:

  • Error: Unable to locate Python.h (E1696: cannot open source file "Python.h" and/or C1083: Cannot open include file: "Python.h": No such file or directory)

    Solution: Verify that the path C/C++ > General > Additional Include Directories in the project properties points to your Python installation's include folder. See step 6 under Create the core C++ project.

  • Error: Unable to locate Python libraries

    Solution: Verify that the path: Linker > General > Additional Library Directories in the project properties points to your Python installation's libs folder. See step 6 under Create the core C++ project.

  • Linker errors related to target architecture

    Solution: Change the C++ target's project architecture to match that of your Python installation. For example, if you're targeting Win32 with the C++ project but your Python installation is 64-bit, change the C++ project to x64.

Test the code and compare the results

Now that you have the DLLs structured as Python extensions, you can refer to them from the Python project, import the modules, and use their methods.

Make the DLL available to Python

You can make the DLL available to Python in any of several ways. Here are two approaches to consider:

  • This first method works if the Python project and the C++ project are in the same solution. Do the following:

    1. In Solution Explorer, right-click the References node in your Python project, and then select Add Reference.

    2. In the dialog that appears, select the Projects tab, select both the superfastcode and superfastcode2 projects, and then select OK.

      Screenshot showing how to add a reference to the "superfastcode" project.

  • An alternative method installs the module in your Python environment, which makes the module available to other Python projects as well. For more information, see the setuptools project documentation. Do the following:

    1. Create a file named setup.py in the C++ project by right-clicking the project and selecting Add > New Item.

    2. Select C++ File (.cpp), name the file setup.py, and then select OK.

      Naming the file with the .py extension makes Visual Studio recognize it as a Python file despite the use of the C++ file template.

      When the file appears in the editor, paste the following code into it, as appropriate to the extension method:

      For CPython extensions (superfastcode project):

      from setuptools import setup, Extension
      
      sfc_module = Extension('superfastcode', sources = ['module.cpp'])
      
      setup(
          name='superfastcode',
          version='1.0',
          description='Python Package with superfastcode C++ extension',
          ext_modules=[sfc_module]
      )
      

      For PyBind11 (superfastcode2 project):

      from setuptools import setup, Extension
      import pybind11
      
      cpp_args = ['-std=c++11', '-stdlib=libc++', '-mmacosx-version-min=10.7']
      
      sfc_module = Extension(
          'superfastcode2',
          sources=['module.cpp'],
          include_dirs=[pybind11.get_include()],
          language='c++',
          extra_compile_args=cpp_args,
          )
      
      setup(
          name='superfastcode2',
          version='1.0',
          description='Python package with superfastcode2 C++ extension (PyBind11)',
          ext_modules=[sfc_module],
      )
      
    3. Create a second file named pyproject.toml in the C++ project, and paste the following code into it:

      [build-system]
      requires = ["setuptools", "wheel", "pybind11"]
      build-backend = "setuptools.build_meta"
      
    4. To build the extension, right-click the open pyproject.toml tab, and then select Copy Full Path. You'll delete the pyproject.toml name from the path before you use it.

    5. In Solution Explorer, right-click the active Python environment, and then select Manage Python Packages.

      Tip

      If you've already installed the package, you'll see it listed here. Before you continue, click the X to uninstall it.

    6. In the search box, paste the copied path, delete pyproject.toml from the end, and then select Enter to install the module from that directory.

      Tip

      If the installation fails because of a permission error, add --user to the end, and try the command again.

Call the DLL from Python

After you've made the DLL available to Python, as described in the preceding section, you can call the superfastcode.fast_tanh and superfastcode2.fast_tanh2 functions from Python code and compare their performance to the Python implementation. To call the DLL, do the following:

  1. Add the following lines in your .py file to call the methods that were exported from the DLLs and display their outputs:

    from superfastcode import fast_tanh
    test(lambda d: [fast_tanh(x) for x in d], '[fast_tanh(x) for x in d] (CPython C++ extension)')
    
    from superfastcode2 import fast_tanh2
    test(lambda d: [fast_tanh2(x) for x in d], '[fast_tanh2(x) for x in d] (PyBind11 C++ extension)')
    
  2. Run the Python program by selecting Debug > Start without Debugging or by selecting Ctrl+F5.

    Note

    If the Start Without Debugging command is disabled, in Solution Explorer, right-click the Python project, and then select Set as Startup Project.

    Observe that the C++ routines run approximately five to 20 times faster than the Python implementation. Typical output appears as follows:

    Running benchmarks with COUNT = 500000
    [tanh(x) for x in d] (Python implementation) took 0.758 seconds
    
    [fast_tanh(x) for x in d] (CPython C++ extension) took 0.076 seconds
    
    [fast_tanh2(x) for x in d] (PyBind11 C++ extension) took 0.204 seconds
    
  3. Try increasing the COUNT variable so that the differences are more pronounced.

    A debug build of the C++ module also runs slower than a release build, because the debug build is less optimized and contains various error checks. Feel free to switch between those configurations for comparison, but remember to go back and update the properties that you set earlier for the release configuration.

In the output, you might see that the PyBind11 extension isn't as fast as the CPython extension, though it should be faster than the pure Python implementation. This difference is largely because you used the METH_O call, which doesn't support multiple parameters, parameter names, or keywords arguments. PyBind11 generates slightly more complex code to provide a more Python-like interface to callers. But, because the test code calls the function 500,000 times, the results might greatly amplify that overhead!

You could reduce the overhead further by moving the for loop into the native code. This approach involves using the iterator protocol (or the PyBind11 py::iterable type for the function parameter) to process each element. Removing the repeated transitions between Python and C++ is an effective way to reduce the time it takes to process the sequence.

Troubleshoot importing errors

If you receive an ImportError message when you try to import your module, you can resolve it in one of the following ways:

  • When you're building through a project reference, ensure that your C++ project properties match the Python environment that's activated for your Python project, especially the Include and Library directories.

  • Ensure that your output file is named superfastcode.pyd. Any other name or extension will prevent it from being imported.

  • If you installed your module by using the setup.py file, check to ensure that you ran the pip command in the Python environment that's activated for your Python project. Expanding the Python environment in Solution Explorer should display an entry for superfastcode.

Debug the C++ code

Visual Studio supports debugging Python and C++ code together. In this section, you walk through the process by using the superfastcode project. The process is the same for the superfastcode2 project.

  1. In Solution Explorer, right-click the Python project, select Properties, select the Debug tab, and then select the Debug > Enable native code debugging option.

    Tip

    When you enable native code debugging, the Python output window might close immediately after the program has finished without giving you the usual Press any key to continue pause.

    Solution: To force a pause after you've enabled native code debugging, add -i option to the Run > Interpreter Arguments field on the Debug tab. This argument puts the Python interpreter into interactive mode after the code has run, at which point it waits for you to select Ctrl+Z and then Enter to close the window.

    Alternatively, if you don't mind modifying your Python code, you can add import os and os.system("pause") statements at the end of your program. This code duplicates the original pause prompt.

  2. Select File > Save to save the property changes.

  3. On the Visual Studio toolbar, set the build configuration to Debug.

    Screenshot of the "Debug" setting on the Visual Studio toolbar.

  4. Because code generally takes longer to run in the debugger, you might want to change the COUNT variable in your .py file to a value that's about five times smaller than the default value. For example, change it from 500000 to 100000.

  5. In your C++ code, set a breakpoint on the first line of the tanh_impl method, and then start the debugger by selecting F5 or Debug > Start Debugging.

    The debugger stops when the breakpoint code is called. If the breakpoint isn't hit, check to ensure that the configuration is set to Debug and that you've saved the project, which doesn't happen automatically when you start the debugger.

    Screenshot of C++ code that contains a breakpoint.

  6. At the breakpoint, you can step through the C++ code, examine variables, and so on. For more information about these features, see Debug Python and C++ together.

Alternative approaches

You can create Python extensions in various ways, as described in the following table. The first two rows, CPython and PyBind11, are discussed in this article.

Approach Vintage Representative users
C/C++ extension modules for CPython 1991 Standard Library
PyBind11 (recommended for C++) 2015
Cython (recommended for C) 2007 gevent, kivy
HPy 2019
mypyc 2017
ctypes 2003 oscrypto
cffi 2013 cryptography, pypy
SWIG 1996 crfsuite
Boost.Python 2002
cppyy 2017

See also

You'll find the completed sample from this walkthrough on GitHub at python-samples-vs-cpp-extension.