System.Threading.Tasks.Task osztály
Ez a cikk kiegészítő megjegyzéseket tartalmaz az API referenciadokumentációjához.
Az Task osztály egyetlen olyan műveletet jelöl, amely nem ad vissza értéket, és általában aszinkron módon hajtja végre. Taskaz objektumok a feladatalapú aszinkron minta egyik központi összetevője, amely először a 4. .NET-keretrendszer került bevezetésre. Mivel az objektum által Task végzett munka általában aszinkron módon hajt végre egy szálkészlet-szálon, nem pedig szinkron módon a fő alkalmazásszálon, a tulajdonságot, valamint a IsCanceled, IsCompletedés IsFaulted tulajdonságokat használhatja Status a tevékenység állapotának meghatározásához. Leggyakrabban lambda kifejezéssel adhatja meg a feladat végrehajtásához szükséges munkát.
Értékek visszaadása esetén az osztályt Task<TResult> kell használnia.
Tevékenység példányosítása
Az alábbi példa négy feladatot hoz létre és hajt végre. Három tevékenység hajt végre egy Action<T> elnevezett action
delegáltat , amely elfogad egy típusú Objectargumentumot. A negyedik tevékenység végrehajt egy lambda kifejezést (egy meghatalmazottat Action ), amely a feladatlétrehozási metódus hívásában beágyazottan van definiálva. Minden feladat példányosítva van, és más módon fut:
A tevékenység
t1
példányosítása feladatosztály-konstruktor meghívásával történik, de a metódus meghívásával Start() csak a tevékenységt2
elindítása után indítható el.A feladat
t2
példányosítása és elindítása egyetlen metódushívásban történik a TaskFactory.StartNew(Action<Object>, Object) metódus meghívásával.A feladat
t3
példányosítása és elindítása egyetlen metódushívásban történik a Run(Action) metódus meghívásával.A feladat
t4
szinkron módon lesz végrehajtva a fő szálon a RunSynchronously() metódus meghívásával.
Mivel a feladat t4
szinkron módon fut, a fő alkalmazásszálon hajtja végre. A fennmaradó feladatok általában egy vagy több szálkészletszálon hajtanak végre aszinkron módon.
using System;
using System.Threading;
using System.Threading.Tasks;
class Example1
{
static void Main()
{
Action<object> action = (object obj) =>
{
Console.WriteLine("Task={0}, obj={1}, Thread={2}",
Task.CurrentId, obj,
Thread.CurrentThread.ManagedThreadId);
};
// Create a task but do not start it.
Task t1 = new Task(action, "alpha");
// Construct a started task
Task t2 = Task.Factory.StartNew(action, "beta");
// Block the main thread to demonstrate that t2 is executing
t2.Wait();
// Launch t1
t1.Start();
Console.WriteLine("t1 has been launched. (Main Thread={0})",
Thread.CurrentThread.ManagedThreadId);
// Wait for the task to finish.
t1.Wait();
// Construct a started task using Task.Run.
String taskData = "delta";
Task t3 = Task.Run(() =>
{
Console.WriteLine("Task={0}, obj={1}, Thread={2}",
Task.CurrentId, taskData,
Thread.CurrentThread.ManagedThreadId);
});
// Wait for the task to finish.
t3.Wait();
// Construct an unstarted task
Task t4 = new Task(action, "gamma");
// Run it synchronously
t4.RunSynchronously();
// Although the task was run synchronously, it is a good practice
// to wait for it in the event exceptions were thrown by the task.
t4.Wait();
}
}
// The example displays output like the following:
// Task=1, obj=beta, Thread=3
// t1 has been launched. (Main Thread=1)
// Task=2, obj=alpha, Thread=4
// Task=3, obj=delta, Thread=3
// Task=4, obj=gamma, Thread=1
open System.Threading
open System.Threading.Tasks
let action =
fun (obj: obj) -> printfn $"Task={Task.CurrentId}, obj={obj}, Thread={Thread.CurrentThread.ManagedThreadId}"
// Create a task but do not start it.
let t1 = new Task(action, "alpha")
// Construct a started task
let t2 = Task.Factory.StartNew(action, "beta")
// Block the main thread to demonstrate that t2 is executing
t2.Wait()
// Launch t1
t1.Start()
printfn $"t1 has been launched. (Main Thread={Thread.CurrentThread.ManagedThreadId})"
// Wait for the task to finish.
t1.Wait()
// Construct a started task using Task.Run.
let taskData = "delta"
let t3 =
Task.Run(fun () -> printfn $"Task={Task.CurrentId}, obj={taskData}, Thread={Thread.CurrentThread.ManagedThreadId}")
// Wait for the task to finish.
t3.Wait()
// Construct an unstarted task
let t4 = new Task(action, "gamma")
// Run it synchronously
t4.RunSynchronously()
// Although the task was run synchronously, it is a good practice
// to wait for it in the event exceptions were thrown by the task.
t4.Wait()
// The example displays output like the following:
// Task=1, obj=beta, Thread=3
// t1 has been launched. (Main Thread=1)
// Task=2, obj=alpha, Thread=4
// Task=3, obj=delta, Thread=3
// Task=4, obj=gamma, Thread=1
Imports System.Threading
Imports System.Threading.Tasks
Module Example2
Public Sub Main()
Dim action As Action(Of Object) =
Sub(obj As Object)
Console.WriteLine("Task={0}, obj={1}, Thread={2}",
Task.CurrentId, obj,
Thread.CurrentThread.ManagedThreadId)
End Sub
' Construct an unstarted task
Dim t1 As New Task(action, "alpha")
' Construct a started task
Dim t2 As Task = Task.Factory.StartNew(action, "beta")
' Block the main thread to demonstrate that t2 is executing
t2.Wait()
' Launch t1
t1.Start()
Console.WriteLine("t1 has been launched. (Main Thread={0})",
Thread.CurrentThread.ManagedThreadId)
' Wait for the task to finish.
t1.Wait()
' Construct a started task using Task.Run.
Dim taskData As String = "delta"
Dim t3 As Task = Task.Run(Sub()
Console.WriteLine("Task={0}, obj={1}, Thread={2}",
Task.CurrentId, taskData,
Thread.CurrentThread.ManagedThreadId)
End Sub)
' Wait for the task to finish.
t3.Wait()
' Construct an unstarted task
Dim t4 As New Task(action, "gamma")
' Run it synchronously
t4.RunSynchronously()
' Although the task was run synchronously, it is a good practice
' to wait for it in the event exceptions were thrown by the task.
t4.Wait()
End Sub
End Module
' The example displays output like the following:
' Task=1, obj=beta, Thread=3
' t1 has been launched. (Main Thread=1)
' Task=2, obj=alpha, Thread=3
' Task=3, obj=delta, Thread=3
' Task=4, obj=gamma, Thread=1
Feladat létrehozása és végrehajtása
A példányokat többféleképpen is létrehozhatja Task . A leggyakoribb módszer a statikus Run metódus meghívása. A Run módszer egyszerű módot kínál a tevékenységek alapértelmezett értékek használatával történő elindítására, további paraméterek megkövetelése nélkül. Az alábbi példa a Run(Action) metódust használja egy olyan tevékenység elindításához, amely hurkokat hoz létre, majd megjeleníti a ciklus iterációinak számát:
using System;
using System.Threading.Tasks;
public class Example
{
public static async Task Main()
{
await Task.Run( () => {
// Just loop.
int ctr = 0;
for (ctr = 0; ctr <= 1000000; ctr++)
{}
Console.WriteLine("Finished {0} loop iterations",
ctr);
} );
}
}
// The example displays the following output:
// Finished 1000001 loop iterations
open System.Threading.Tasks
let main =
task {
do!
Task.Run(fun () ->
for i = 0 to 1000000 do
printfn $"Finished {i} loop iterations")
}
main.Wait()
// The example displays the following output:
// Finished 1000001 loop iterations
Imports System.Threading.Tasks
Module Example1
Public Sub Main()
Dim t As Task = Task.Run(Sub()
' Just loop.
Dim ctr As Integer = 0
For ctr = 0 To 1000000
Next
Console.WriteLine("Finished {0} loop iterations",
ctr)
End Sub)
t.Wait()
End Sub
End Module
' The example displays the following output:
' Finished 1000001 loop iterations
Alternatív megoldás a statikus TaskFactory.StartNew módszer. A Task.Factory tulajdonság egy objektumot TaskFactory ad vissza. A metódus túlterhelései TaskFactory.StartNew lehetővé teszik a tevékenységlétrehozási beállításoknak és egy feladatütemezőnek átadni kívánt paraméterek megadását. Az alábbi példa a TaskFactory.StartNew metódus használatával indít el egy feladatot. Ez funkcionálisan egyenértékű az előző példában szereplő kóddal.
using System;
using System.Threading.Tasks;
public class Example2
{
public static void Main()
{
Task t = Task.Factory.StartNew(() =>
{
// Just loop.
int ctr = 0;
for (ctr = 0; ctr <= 1000000; ctr++)
{ }
Console.WriteLine("Finished {0} loop iterations",
ctr);
});
t.Wait();
}
}
// The example displays the following output:
// Finished 1000001 loop iterations
open System.Threading.Tasks
let t =
Task.Factory.StartNew(fun () ->
// Just loop.
for i = 0 to 1000000 do
printfn $"Finished {i} loop iterations")
t.Wait()
// The example displays the following output:
// Finished 1000001 loop iterations
Imports System.Threading.Tasks
Module Example3
Public Sub Main()
Dim t As Task = Task.Factory.StartNew(Sub()
' Just loop.
Dim ctr As Integer = 0
For ctr = 0 To 1000000
Next
Console.WriteLine("Finished {0} loop iterations",
ctr)
End Sub)
t.Wait()
End Sub
End Module
' The example displays the following output:
' Finished 1000001 loop iterations
További részletes példákért tekintse meg a feladatalapú aszinkron programozást.
Feladatlétrehozás és -végrehajtás külön
Az Task osztály olyan konstruktorokat is biztosít, amelyek inicializálják a feladatot, de nem ütemezik végrehajtásra. Teljesítménybeli okokból a Task.Run számítási feladatok létrehozásának és ütemezésének előnyben részesített mechanizmusa a metódus TaskFactory.StartNew , de olyan forgatókönyvek esetén, ahol a létrehozást és az ütemezést külön kell választani, használhatja a konstruktorokat, majd meghívhatja a Task.Start metódust, hogy később ütemezze a feladatot végrehajtásra.
Várjon, amíg egy feladat befejeződik
Mivel a tevékenységek általában aszinkron módon futnak egy szálkészlet-szálon, a tevékenységet létrehozó és elindító szál a tevékenység példányosítása után is folytatja a végrehajtást. Bizonyos esetekben, amikor a hívó szál a fő alkalmazásszál, az alkalmazás leállhat, mielőtt a feladat ténylegesen megkezdené a végrehajtást. Más esetekben előfordulhat, hogy az alkalmazás logikája megköveteli, hogy a hívó szál csak akkor folytassa a végrehajtást, ha egy vagy több tevékenység végrehajtása befejeződött. A hívószál és az általa indított aszinkron feladatok végrehajtását szinkronizálhatja úgy, hogy meghív egy metódust Wait
, hogy megvárjon egy vagy több feladatot.
Ha meg szeretné várni, hogy egy tevékenység befejeződjön, meghívhatja annak metódusát Task.Wait . A metódus hívása blokkolja a Wait hívó szálat, amíg az egyetlen osztálypéldány végrehajtása befejeződik.
Az alábbi példa meghívja a paraméter nélküli Wait() metódust, hogy feltétel nélkül várjon, amíg egy tevékenység befejeződik. A feladat úgy szimulálja a munkát, hogy a Thread.Sleep metódust két másodpercre alvó állapotba hívja.
using System;
using System.Threading;
using System.Threading.Tasks;
class Program
{
static Random rand = new Random();
static void Main()
{
// Wait on a single task with no timeout specified.
Task taskA = Task.Run( () => Thread.Sleep(2000));
Console.WriteLine("taskA Status: {0}", taskA.Status);
try {
taskA.Wait();
Console.WriteLine("taskA Status: {0}", taskA.Status);
}
catch (AggregateException) {
Console.WriteLine("Exception in taskA.");
}
}
}
// The example displays output like the following:
// taskA Status: WaitingToRun
// taskA Status: RanToCompletion
open System
open System.Threading
open System.Threading.Tasks
let rand = Random()
// Wait on a single task with no timeout specified.
let taskA = Task.Run(fun () -> Thread.Sleep 2000)
printfn $"taskA Status: {taskA.Status}"
try
taskA.Wait()
printfn $"taskA Status: {taskA.Status}"
with :? AggregateException ->
printfn "Exception in taskA."
// The example displays output like the following:
// taskA Status: WaitingToRun
// taskA Status: RanToCompletion
Imports System.Threading
Imports System.Threading.Tasks
Module Example4
Public Sub Main()
' Wait on a single task with no timeout specified.
Dim taskA = Task.Run(Sub() Thread.Sleep(2000))
Console.WriteLine("taskA Status: {0}", taskA.Status)
Try
taskA.Wait()
Console.WriteLine("taskA Status: {0}", taskA.Status)
Catch e As AggregateException
Console.WriteLine("Exception in taskA.")
End Try
End Sub
End Module
' The example displays output like the following:
' taskA Status: WaitingToRun
' taskA Status: RanToCompletion
Feltételesen megvárhatja a feladat befejezését is. A Wait(Int32) metódusok és Wait(TimeSpan) a metódusok blokkolják a hívó szálat, amíg a tevékenység befejeződik, vagy el nem telik egy időtúllépési időköz, attól függően, hogy melyik az első. Mivel az alábbi példa egy két másodpercig alvó, de egy másodperces időtúllépési értéket definiáló tevékenységet indít el, a hívószál az időtúllépés lejáratáig és a feladat végrehajtása előtt blokkol.
using System;
using System.Threading;
using System.Threading.Tasks;
public class Example5
{
public static void Main()
{
// Wait on a single task with a timeout specified.
Task taskA = Task.Run(() => Thread.Sleep(2000));
try
{
taskA.Wait(1000); // Wait for 1 second.
bool completed = taskA.IsCompleted;
Console.WriteLine("Task A completed: {0}, Status: {1}",
completed, taskA.Status);
if (!completed)
Console.WriteLine("Timed out before task A completed.");
}
catch (AggregateException)
{
Console.WriteLine("Exception in taskA.");
}
}
}
// The example displays output like the following:
// Task A completed: False, Status: Running
// Timed out before task A completed.
open System
open System.Threading
open System.Threading.Tasks
// Wait on a single task with a timeout specified.
let taskA = Task.Run(fun () -> Thread.Sleep 2000)
try
taskA.Wait 1000 |> ignore // Wait for 1 second.
let completed = taskA.IsCompleted
printfn $"Task A completed: {completed}, Status: {taskA.Status}"
if not completed then
printfn "Timed out before task A completed."
with :? AggregateException ->
printfn "Exception in taskA."
// The example displays output like the following:
// Task A completed: False, Status: Running
// Timed out before task A completed.
Imports System.Threading
Imports System.Threading.Tasks
Module Example5
Public Sub Main()
' Wait on a single task with a timeout specified.
Dim taskA As Task = Task.Run(Sub() Thread.Sleep(2000))
Try
taskA.Wait(1000) ' Wait for 1 second.
Dim completed As Boolean = taskA.IsCompleted
Console.WriteLine("Task.Completed: {0}, Status: {1}",
completed, taskA.Status)
If Not completed Then
Console.WriteLine("Timed out before task A completed.")
End If
Catch e As AggregateException
Console.WriteLine("Exception in taskA.")
End Try
End Sub
End Module
' The example displays the following output:
' Task A completed: False, Status: Running
' Timed out before task A completed.
A lemondási jogkivonatot a hívással és Wait(Int32, CancellationToken) a Wait(CancellationToken) metódusokkal is megadhatja. Ha a jogkivonat tulajdonsága IsCancellationRequested a Wait metódus végrehajtása közben jön true
létre vagy válik, true
a metódus egy OperationCanceledException.
Bizonyos esetekben érdemes megvárni a feladatok végrehajtásának első lépését, de nem érdekli, hogy melyik feladatról van szó. Erre a célra meghívhatja a módszer egyik túlterhelését Task.WaitAny . Az alábbi példa három feladatot hoz létre, amelyek mindegyike egy véletlenszerű számgenerátor által meghatározott időközönként alvó állapotban van. A WaitAny(Task[]) metódus megvárja az első feladat befejezését. A példa ezután mindhárom tevékenység állapotával kapcsolatos információkat jeleníti meg.
using System;
using System.Threading;
using System.Threading.Tasks;
public class Example4
{
public static void Main()
{
var tasks = new Task[3];
var rnd = new Random();
for (int ctr = 0; ctr <= 2; ctr++)
tasks[ctr] = Task.Run(() => Thread.Sleep(rnd.Next(500, 3000)));
try
{
int index = Task.WaitAny(tasks);
Console.WriteLine("Task #{0} completed first.\n", tasks[index].Id);
Console.WriteLine("Status of all tasks:");
foreach (var t in tasks)
Console.WriteLine(" Task #{0}: {1}", t.Id, t.Status);
}
catch (AggregateException)
{
Console.WriteLine("An exception occurred.");
}
}
}
// The example displays output like the following:
// Task #1 completed first.
//
// Status of all tasks:
// Task #3: Running
// Task #1: RanToCompletion
// Task #4: Running
open System
open System.Threading
open System.Threading.Tasks
let rnd = new Random()
let tasks =
[| for _ = 0 to 2 do
Task.Run(fun () -> rnd.Next(500, 3000) |> Thread.Sleep) |]
try
let index = Task.WaitAny tasks
printfn $"Task #{tasks[index].Id} completed first.\n"
printfn "Status of all tasks:"
for t in tasks do
printfn $" Task #{t.Id}: {t.Status}"
with :? AggregateException ->
printfn "An exception occurred."
// The example displays output like the following:
// Task #1 completed first.
//
// Status of all tasks:
// Task #3: Running
// Task #1: RanToCompletion
// Task #4: Running
Imports System.Threading
Module Example8
Public Sub Main()
Dim tasks(2) As Task
Dim rnd As New Random()
For ctr As Integer = 0 To 2
tasks(ctr) = Task.Run(Sub() Thread.Sleep(rnd.Next(500, 3000)))
Next
Try
Dim index As Integer = Task.WaitAny(tasks)
Console.WriteLine("Task #{0} completed first.", tasks(index).Id)
Console.WriteLine()
Console.WriteLine("Status of all tasks:")
For Each t In tasks
Console.WriteLine(" Task #{0}: {1}", t.Id, t.Status)
Next
Catch e As AggregateException
Console.WriteLine("An exception occurred.")
End Try
End Sub
End Module
' The example displays output like the following:
' Task #1 completed first.
'
' Status of all tasks:
' Task #3: Running
' Task #1: RanToCompletion
' Task #4: Running
A metódus meghívásával WaitAll meg is várhatja, hogy az összes feladat befejeződjön. Az alábbi példa tíz feladatot hoz létre, mind a tízet megvárja, majd megjeleníti az állapotukat.
using System;
using System.Threading;
using System.Threading.Tasks;
public class Example3
{
public static void Main()
{
// Wait for all tasks to complete.
Task[] tasks = new Task[10];
for (int i = 0; i < 10; i++)
{
tasks[i] = Task.Run(() => Thread.Sleep(2000));
}
try
{
Task.WaitAll(tasks);
}
catch (AggregateException ae)
{
Console.WriteLine("One or more exceptions occurred: ");
foreach (var ex in ae.Flatten().InnerExceptions)
Console.WriteLine(" {0}", ex.Message);
}
Console.WriteLine("Status of completed tasks:");
foreach (var t in tasks)
Console.WriteLine(" Task #{0}: {1}", t.Id, t.Status);
}
}
// The example displays the following output:
// Status of completed tasks:
// Task #2: RanToCompletion
// Task #1: RanToCompletion
// Task #3: RanToCompletion
// Task #4: RanToCompletion
// Task #6: RanToCompletion
// Task #5: RanToCompletion
// Task #7: RanToCompletion
// Task #8: RanToCompletion
// Task #9: RanToCompletion
// Task #10: RanToCompletion
open System
open System.Threading
open System.Threading.Tasks
// Wait for all tasks to complete.
let tasks =
[| for _ = 0 to 9 do
Task.Run(fun () -> Thread.Sleep 2000) |]
try
Task.WaitAll tasks
with :? AggregateException as ae ->
printfn "One or more exceptions occurred: "
for ex in ae.Flatten().InnerExceptions do
printfn $" {ex.Message}"
printfn "Status of completed tasks:"
for t in tasks do
printfn $" Task #{t.Id}: {t.Status}"
// The example displays the following output:
// Status of completed tasks:
// Task #2: RanToCompletion
// Task #1: RanToCompletion
// Task #3: RanToCompletion
// Task #4: RanToCompletion
// Task #6: RanToCompletion
// Task #5: RanToCompletion
// Task #7: RanToCompletion
// Task #8: RanToCompletion
// Task #9: RanToCompletion
// Task #10: RanToCompletion
Imports System.Threading
Imports System.Threading.Tasks
Module Example6
Public Sub Main()
' Wait for all tasks to complete.
Dim tasks(9) As Task
For i As Integer = 0 To 9
tasks(i) = Task.Run(Sub() Thread.Sleep(2000))
Next
Try
Task.WaitAll(tasks)
Catch ae As AggregateException
Console.WriteLine("One or more exceptions occurred: ")
For Each ex In ae.Flatten().InnerExceptions
Console.WriteLine(" {0}", ex.Message)
Next
End Try
Console.WriteLine("Status of completed tasks:")
For Each t In tasks
Console.WriteLine(" Task #{0}: {1}", t.Id, t.Status)
Next
End Sub
End Module
' The example displays the following output:
' Status of completed tasks:
' Task #2: RanToCompletion
' Task #1: RanToCompletion
' Task #3: RanToCompletion
' Task #4: RanToCompletion
' Task #6: RanToCompletion
' Task #5: RanToCompletion
' Task #7: RanToCompletion
' Task #8: RanToCompletion
' Task #9: RanToCompletion
' Task #10: RanToCompletion
Vegye figyelembe, hogy amikor egy vagy több tevékenység befejezésére vár, a futó tevékenységekben szereplő kivételek propagálása a metódust meghívó Wait
szálon történik, ahogyan az az alábbi példában is látható. 12 feladatot indít el, amelyek közül három normál módon fejeződik be, és három kivételt eredményez. A fennmaradó hat tevékenység közül három a kezdés előtt megszakad, három pedig a végrehajtás során. A metódushívás kivételeket WaitAll eredményez, és egy try
/catch
blokk kezeli.
using System;
using System.Threading;
using System.Threading.Tasks;
public class Example6
{
public static void Main()
{
// Create a cancellation token and cancel it.
var source1 = new CancellationTokenSource();
var token1 = source1.Token;
source1.Cancel();
// Create a cancellation token for later cancellation.
var source2 = new CancellationTokenSource();
var token2 = source2.Token;
// Create a series of tasks that will complete, be cancelled,
// timeout, or throw an exception.
Task[] tasks = new Task[12];
for (int i = 0; i < 12; i++)
{
switch (i % 4)
{
// Task should run to completion.
case 0:
tasks[i] = Task.Run(() => Thread.Sleep(2000));
break;
// Task should be set to canceled state.
case 1:
tasks[i] = Task.Run(() => Thread.Sleep(2000),
token1);
break;
case 2:
// Task should throw an exception.
tasks[i] = Task.Run(() => { throw new NotSupportedException(); });
break;
case 3:
// Task should examine cancellation token.
tasks[i] = Task.Run(() =>
{
Thread.Sleep(2000);
if (token2.IsCancellationRequested)
token2.ThrowIfCancellationRequested();
Thread.Sleep(500);
}, token2);
break;
}
}
Thread.Sleep(250);
source2.Cancel();
try
{
Task.WaitAll(tasks);
}
catch (AggregateException ae)
{
Console.WriteLine("One or more exceptions occurred:");
foreach (var ex in ae.InnerExceptions)
Console.WriteLine(" {0}: {1}", ex.GetType().Name, ex.Message);
}
Console.WriteLine("\nStatus of tasks:");
foreach (var t in tasks)
{
Console.WriteLine(" Task #{0}: {1}", t.Id, t.Status);
if (t.Exception != null)
{
foreach (var ex in t.Exception.InnerExceptions)
Console.WriteLine(" {0}: {1}", ex.GetType().Name,
ex.Message);
}
}
}
}
// The example displays output like the following:
// One or more exceptions occurred:
// TaskCanceledException: A task was canceled.
// NotSupportedException: Specified method is not supported.
// TaskCanceledException: A task was canceled.
// TaskCanceledException: A task was canceled.
// NotSupportedException: Specified method is not supported.
// TaskCanceledException: A task was canceled.
// TaskCanceledException: A task was canceled.
// NotSupportedException: Specified method is not supported.
// TaskCanceledException: A task was canceled.
//
// Status of tasks:
// Task #13: RanToCompletion
// Task #1: Canceled
// Task #3: Faulted
// NotSupportedException: Specified method is not supported.
// Task #8: Canceled
// Task #14: RanToCompletion
// Task #4: Canceled
// Task #6: Faulted
// NotSupportedException: Specified method is not supported.
// Task #7: Canceled
// Task #15: RanToCompletion
// Task #9: Canceled
// Task #11: Faulted
// NotSupportedException: Specified method is not supported.
// Task #12: Canceled
open System
open System.Threading
open System.Threading.Tasks
// Create a cancellation token and cancel it.
let source1 = new CancellationTokenSource()
let token1 = source1.Token
source1.Cancel()
// Create a cancellation token for later cancellation.
let source2 = new CancellationTokenSource()
let token2 = source2.Token
// Create a series of tasks that will complete, be cancelled,
// timeout, or throw an exception.
let tasks =
[| for i in 0..11 do
match i % 4 with
// Task should run to completion.
| 0 -> Task.Run(fun () -> Thread.Sleep 2000)
// Task should be set to canceled state.
| 1 -> Task.Run(fun () -> Thread.Sleep 2000, token1)
// Task should throw an exception.
| 2 -> Task.Run(fun () -> NotSupportedException())
// Task should examine cancellation token.
| _ ->
Task.Run(fun () ->
Thread.Sleep 2000
if token2.IsCancellationRequested then
token2.ThrowIfCancellationRequested()
Thread.Sleep 500, token2) |]
Thread.Sleep 250
source2.Cancel()
try
Task.WaitAll tasks
with :? AggregateException as ae ->
printfn "One or more exceptions occurred:"
for ex in ae.InnerExceptions do
printfn $" {ex.GetType().Name}: {ex.Message}"
printfn "\nStatus of tasks:"
for t in tasks do
printfn $" Task #{t.Id}: {t.Status}"
if isNull t.Exception |> not then
for ex in t.Exception.InnerExceptions do
printfn $" {ex.GetType().Name}: {ex.Message}"
// The example displays output like the following:
// One or more exceptions occurred:
// TaskCanceledException: A task was canceled.
// NotSupportedException: Specified method is not supported.
// TaskCanceledException: A task was canceled.
// TaskCanceledException: A task was canceled.
// NotSupportedException: Specified method is not supported.
// TaskCanceledException: A task was canceled.
// TaskCanceledException: A task was canceled.
// NotSupportedException: Specified method is not supported.
// TaskCanceledException: A task was canceled.
//
// Status of tasks:
// Task #13: RanToCompletion
// Task #1: Canceled
// Task #3: Faulted
// NotSupportedException: Specified method is not supported.
// Task #8: Canceled
// Task #14: RanToCompletion
// Task #4: Canceled
// Task #6: Faulted
// NotSupportedException: Specified method is not supported.
// Task #7: Canceled
// Task #15: RanToCompletion
// Task #9: Canceled
// Task #11: Faulted
// NotSupportedException: Specified method is not supported.
// Task #12: Canceled
Imports System.Threading
Imports System.Threading.Tasks
Module Example7
Public Sub Main()
' Create a cancellation token and cancel it.
Dim source1 As New CancellationTokenSource()
Dim token1 As CancellationToken = source1.Token
source1.Cancel()
' Create a cancellation token for later cancellation.
Dim source2 As New CancellationTokenSource()
Dim token2 As CancellationToken = source2.Token
' Create a series of tasks that will complete, be cancelled,
' timeout, or throw an exception.
Dim tasks(11) As Task
For i As Integer = 0 To 11
Select Case i Mod 4
' Task should run to completion.
Case 0
tasks(i) = Task.Run(Sub() Thread.Sleep(2000))
' Task should be set to canceled state.
Case 1
tasks(i) = Task.Run(Sub() Thread.Sleep(2000), token1)
Case 2
' Task should throw an exception.
tasks(i) = Task.Run(Sub()
Throw New NotSupportedException()
End Sub)
Case 3
' Task should examine cancellation token.
tasks(i) = Task.Run(Sub()
Thread.Sleep(2000)
If token2.IsCancellationRequested Then
token2.ThrowIfCancellationRequested()
End If
Thread.Sleep(500)
End Sub, token2)
End Select
Next
Thread.Sleep(250)
source2.Cancel()
Try
Task.WaitAll(tasks)
Catch ae As AggregateException
Console.WriteLine("One or more exceptions occurred:")
For Each ex In ae.InnerExceptions
Console.WriteLine(" {0}: {1}", ex.GetType().Name, ex.Message)
Next
End Try
Console.WriteLine()
Console.WriteLine("Status of tasks:")
For Each t In tasks
Console.WriteLine(" Task #{0}: {1}", t.Id, t.Status)
If t.Exception IsNot Nothing Then
For Each ex In t.Exception.InnerExceptions
Console.WriteLine(" {0}: {1}", ex.GetType().Name,
ex.Message)
Next
End If
Next
End Sub
End Module
' The example displays output like the following:
' One or more exceptions occurred:
' TaskCanceledException: A task was canceled.
' NotSupportedException: Specified method is not supported.
' TaskCanceledException: A task was canceled.
' TaskCanceledException: A task was canceled.
' NotSupportedException: Specified method is not supported.
' TaskCanceledException: A task was canceled.
' TaskCanceledException: A task was canceled.
' NotSupportedException: Specified method is not supported.
' TaskCanceledException: A task was canceled.
'
' Status of tasks:
' Task #13: RanToCompletion
' Task #1: Canceled
' Task #3: Faulted
' NotSupportedException: Specified method is not supported.
' Task #8: Canceled
' Task #14: RanToCompletion
' Task #4: Canceled
' Task #6: Faulted
' NotSupportedException: Specified method is not supported.
' Task #7: Canceled
' Task #15: RanToCompletion
' Task #9: Canceled
' Task #11: Faulted
' NotSupportedException: Specified method is not supported.
' Task #12: Canceled
A feladatalapú aszinkron műveletek kivételkezelésével kapcsolatos további információkért lásd a Kivételkezelés című témakört.
Feladatok és kultúra
A 4.6-os .NET-keretrendszer megcélzott asztali alkalmazásokkal kezdve a feladatot létrehozó és meghívó szál kultúrája a szál környezetének részévé válik. Vagyis a tevékenység végrehajtásához használt szál jelenlegi kultúrájától függetlenül a tevékenység jelenlegi kultúrája a hívószál kultúrája. A 4.6-os .NET-keretrendszer előtt .NET-keretrendszer verziójú alkalmazások esetében a feladat kultúrája annak a szálnak a kultúrája, amelyen a feladat végrehajtja. További információt a témakör "Kultúra és feladatalapú aszinkron műveletek" című szakaszában CultureInfo talál.
Feljegyzés
Az áruházbeli alkalmazások a Windows-futtatókörnyezet követik az alapértelmezett kultúra beállításában és lekérésében.
Hibakereső fejlesztőknek
Az egyéni hibakeresőket implementáló fejlesztők számára a feladat több belső és privát tagja hasznos lehet (ezek kiadásról kiadásra változhatnak). A m_taskId
mező a tulajdonság háttértárolójaként Id szolgál, azonban a mező közvetlen elérése hibakeresőből hatékonyabb lehet, mint ugyanazt az értéket elérni a tulajdonság getter metódusával (a s_taskIdCounter
számlálóval lekérhető a tevékenység következő elérhető azonosítója). Hasonlóképpen, a m_stateFlags
mező a tevékenység aktuális életciklus-szakaszára vonatkozó információkat tárolja, a tulajdonságon keresztül Status is elérhető információkat. A m_action
mező a tevékenység delegáltjára mutató hivatkozást tárolja, a m_stateObject
mező pedig a fejlesztő által a tevékenységnek átadott aszinkron állapotot tárolja. Végül a veremkereteket elemző hibakeresők esetében a InternalWait
metódus egy lehetséges jelölőt szolgál ki arra az esetben, ha egy tevékenység várakozási műveletet hajt végre.
Visszajelzés
https://aka.ms/ContentUserFeedback.
Hamarosan elérhető: 2024-ben fokozatosan kivezetjük a GitHub-problémákat a tartalom visszajelzési mechanizmusaként, és lecseréljük egy új visszajelzési rendszerre. További információ:Visszajelzés küldése és megtekintése a következőhöz: