Bagikan melalui


List<T> Konstruktor

Definisi

Menginisialisasi instans baru kelas List<T>.

Overload

List<T>()

Menginisialisasi instans List<T> baru kelas yang kosong dan memiliki kapasitas awal default.

List<T>(IEnumerable<T>)

Menginisialisasi instans List<T> baru kelas yang berisi elemen yang disalin dari koleksi yang ditentukan dan memiliki kapasitas yang cukup untuk mengakomodasi jumlah elemen yang disalin.

List<T>(Int32)

Menginisialisasi instans baru kelas List<T> yang kosong dan memiliki kapasitas awal yang ditentukan.

List<T>()

Sumber:
List.cs
Sumber:
List.cs
Sumber:
List.cs

Menginisialisasi instans List<T> baru kelas yang kosong dan memiliki kapasitas awal default.

public:
 List();
public List ();
Public Sub New ()

Contoh

Contoh berikut menunjukkan konstruktor tanpa parameter dari List<T> kelas generik. Konstruktor tanpa parameter membuat daftar dengan kapasitas default, seperti yang ditunjukkan dengan menampilkan Capacity properti .

Contoh menambahkan, menyisipkan, dan menghapus item, memperlihatkan bagaimana kapasitas berubah saat metode ini digunakan.

using namespace System;
using namespace System::Collections::Generic;

void main()
{
    List<String^>^ dinosaurs = gcnew List<String^>();

    Console::WriteLine("\nCapacity: {0}", dinosaurs->Capacity);

    dinosaurs->Add("Tyrannosaurus");
    dinosaurs->Add("Amargasaurus");
    dinosaurs->Add("Mamenchisaurus");
    dinosaurs->Add("Deinonychus");
    dinosaurs->Add("Compsognathus");

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    Console::WriteLine("\nCapacity: {0}", dinosaurs->Capacity);
    Console::WriteLine("Count: {0}", dinosaurs->Count);

    Console::WriteLine("\nContains(\"Deinonychus\"): {0}",
        dinosaurs->Contains("Deinonychus"));

    Console::WriteLine("\nInsert(2, \"Compsognathus\")");
    dinosaurs->Insert(2, "Compsognathus");

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    Console::WriteLine("\ndinosaurs[3]: {0}", dinosaurs[3]);

    Console::WriteLine("\nRemove(\"Compsognathus\")");
    dinosaurs->Remove("Compsognathus");

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    dinosaurs->TrimExcess();
    Console::WriteLine("\nTrimExcess()");
    Console::WriteLine("Capacity: {0}", dinosaurs->Capacity);
    Console::WriteLine("Count: {0}", dinosaurs->Count);

    dinosaurs->Clear();
    Console::WriteLine("\nClear()");
    Console::WriteLine("Capacity: {0}", dinosaurs->Capacity);
    Console::WriteLine("Count: {0}", dinosaurs->Count);
}

/* This code example produces the following output:

Capacity: 0

Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus
Compsognathus

Capacity: 8
Count: 5

Contains("Deinonychus"): True

Insert(2, "Compsognathus")

Tyrannosaurus
Amargasaurus
Compsognathus
Mamenchisaurus
Deinonychus
Compsognathus

dinosaurs[3]: Mamenchisaurus

Remove("Compsognathus")

Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus
Compsognathus

TrimExcess()
Capacity: 5
Count: 5

Clear()
Capacity: 5
Count: 0
 */
List<string> dinosaurs = new List<string>();

Console.WriteLine("\nCapacity: {0}", dinosaurs.Capacity);

dinosaurs.Add("Tyrannosaurus");
dinosaurs.Add("Amargasaurus");
dinosaurs.Add("Mamenchisaurus");
dinosaurs.Add("Deinonychus");
dinosaurs.Add("Compsognathus");
Console.WriteLine();
foreach(string dinosaur in dinosaurs)
{
    Console.WriteLine(dinosaur);
}

Console.WriteLine("\nCapacity: {0}", dinosaurs.Capacity);
Console.WriteLine("Count: {0}", dinosaurs.Count);

Console.WriteLine("\nContains(\"Deinonychus\"): {0}",
    dinosaurs.Contains("Deinonychus"));

Console.WriteLine("\nInsert(2, \"Compsognathus\")");
dinosaurs.Insert(2, "Compsognathus");

Console.WriteLine();
foreach(string dinosaur in dinosaurs)
{
    Console.WriteLine(dinosaur);
}

// Shows accessing the list using the Item property.
Console.WriteLine("\ndinosaurs[3]: {0}", dinosaurs[3]);

Console.WriteLine("\nRemove(\"Compsognathus\")");
dinosaurs.Remove("Compsognathus");

Console.WriteLine();
foreach(string dinosaur in dinosaurs)
{
    Console.WriteLine(dinosaur);
}

dinosaurs.TrimExcess();
Console.WriteLine("\nTrimExcess()");
Console.WriteLine("Capacity: {0}", dinosaurs.Capacity);
Console.WriteLine("Count: {0}", dinosaurs.Count);

dinosaurs.Clear();
Console.WriteLine("\nClear()");
Console.WriteLine("Capacity: {0}", dinosaurs.Capacity);
Console.WriteLine("Count: {0}", dinosaurs.Count);

/* This code example produces the following output:

Capacity: 0

Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus
Compsognathus

Capacity: 8
Count: 5

Contains("Deinonychus"): True

Insert(2, "Compsognathus")

Tyrannosaurus
Amargasaurus
Compsognathus
Mamenchisaurus
Deinonychus
Compsognathus

dinosaurs[3]: Mamenchisaurus

Remove("Compsognathus")

Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus
Compsognathus

TrimExcess()
Capacity: 5
Count: 5

Clear()
Capacity: 5
Count: 0
 */
Imports System.Collections.Generic

Public Class Example

    Public Shared Sub Main()
        Dim dinosaurs As New List(Of String)

        Console.WriteLine(vbLf & "Capacity: {0}", dinosaurs.Capacity)

        dinosaurs.Add("Tyrannosaurus")
        dinosaurs.Add("Amargasaurus")
        dinosaurs.Add("Mamenchisaurus")
        dinosaurs.Add("Deinonychus")
        dinosaurs.Add("Compsognathus")

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next

        Console.WriteLine(vbLf & "Capacity: {0}", dinosaurs.Capacity)
        Console.WriteLine("Count: {0}", dinosaurs.Count)

        Console.WriteLine(vbLf & "Contains(""Deinonychus""): {0}", _
            dinosaurs.Contains("Deinonychus"))

        Console.WriteLine(vbLf & "Insert(2, ""Compsognathus"")")
        dinosaurs.Insert(2, "Compsognathus")

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next
        ' Shows how to access the list using the Item property.
        Console.WriteLine(vbLf & "dinosaurs(3): {0}", dinosaurs(3))
        Console.WriteLine(vbLf & "Remove(""Compsognathus"")")
        dinosaurs.Remove("Compsognathus")

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next

        dinosaurs.TrimExcess()
        Console.WriteLine(vbLf & "TrimExcess()")
        Console.WriteLine("Capacity: {0}", dinosaurs.Capacity)
        Console.WriteLine("Count: {0}", dinosaurs.Count)

        dinosaurs.Clear()
        Console.WriteLine(vbLf & "Clear()")
        Console.WriteLine("Capacity: {0}", dinosaurs.Capacity)
        Console.WriteLine("Count: {0}", dinosaurs.Count)
    End Sub
End Class

' This code example produces the following output:
'
'Capacity: 0
'
'Tyrannosaurus
'Amargasaurus
'Mamenchisaurus
'Deinonychus
'Compsognathus
'
'Capacity: 8
'Count: 5
'
'Contains("Deinonychus"): True
'
'Insert(2, "Compsognathus")
'
'Tyrannosaurus
'Amargasaurus
'Compsognathus
'Mamenchisaurus
'Deinonychus
'Compsognathus
'
'dinosaurs(3): Mamenchisaurus
'
'Remove("Compsognathus")
'
'Tyrannosaurus
'Amargasaurus
'Mamenchisaurus
'Deinonychus
'Compsognathus
'
'TrimExcess()
'Capacity: 5
'Count: 5
'
'Clear()
'Capacity: 5
'Count: 0

[<EntryPoint>]
let main argv = 
    // We refer to System.Collections.Generic.List<'T> by its type 
    // abbreviation ResizeArray<'T> to avoid conflict with the List module.    
    // Note: In F# code, F# linked lists are usually preferred over
    // ResizeArray<'T> when an extendable collection is required.
    let dinosaurs = ResizeArray<_>()
 
    // Write out the dinosaurs in the ResizeArray.
    let printDinosaurs() =
        printfn ""
        dinosaurs |> Seq.iter (fun p -> printfn "%O" p) 
 
    
    printfn "\nCapacity: %i" dinosaurs.Capacity
 
    dinosaurs.Add("Tyrannosaurus")
    dinosaurs.Add("Amargasaurus")
    dinosaurs.Add("Mamenchisaurus")
    dinosaurs.Add("Deinonychus")
    dinosaurs.Add("Compsognathus")
 
    printDinosaurs()
 
    printfn "\nCapacity: %i" dinosaurs.Capacity
    printfn "Count: %i" dinosaurs.Count
 
    printfn "\nContains(\"Deinonychus\"): %b" (dinosaurs.Contains("Deinonychus"))
 
    printfn "\nInsert(2, \"Compsognathus\")"
    dinosaurs.Insert(2, "Compsognathus")
 
    printDinosaurs()
 
    // Shows accessing the list using the Item property.
    printfn "\ndinosaurs[3]: %s" dinosaurs.[3]
 
    printfn "\nRemove(\"Compsognathus\")"
    dinosaurs.Remove("Compsognathus") |> ignore
 
    printDinosaurs()
 
    dinosaurs.TrimExcess()
    printfn "\nTrimExcess()"
    printfn "Capacity: %i" dinosaurs.Capacity
    printfn "Count: %i" dinosaurs.Count
 
    dinosaurs.Clear()
    printfn "\nClear()"
    printfn "Capacity: %i" dinosaurs.Capacity
    printfn "Count: %i" dinosaurs.Count
 
    0 // return an integer exit code
 
    (* This code example produces the following output:
 
Capacity: 0
 
Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus
Compsognathus
 
Capacity: 8
Count: 5
 
Contains("Deinonychus"): true
 
Insert(2, "Compsognathus")
 
Tyrannosaurus
Amargasaurus
Compsognathus
Mamenchisaurus
Deinonychus
Compsognathus
 
dinosaurs[3]: Mamenchisaurus
 
Remove("Compsognathus")
 
Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus
Compsognathus
 
TrimExcess()
Capacity: 5
Count: 5
 
Clear()
Capacity: 5
Count: 0
    *)

Keterangan

Kapasitas a List<T> adalah jumlah elemen yang dapat dipegang List<T> . Saat elemen ditambahkan ke List<T>, kapasitas secara otomatis ditingkatkan sesuai kebutuhan dengan merealokasi array internal.

Jika ukuran koleksi dapat diperkirakan, menggunakan List<T>(Int32) konstruktor dan menentukan kapasitas awal menghilangkan kebutuhan untuk melakukan sejumlah operasi pengubahan ukuran sambil menambahkan elemen ke List<T>.

Kapasitas dapat dikurangi dengan memanggil TrimExcess metode atau dengan mengatur Capacity properti secara eksplisit. Mengurangi kapasitas mengalokasikan memori dan menyalin semua elemen di List<T>.

Konstruktor ini adalah operasi O(1).

Berlaku untuk

List<T>(IEnumerable<T>)

Sumber:
List.cs
Sumber:
List.cs
Sumber:
List.cs

Menginisialisasi instans List<T> baru kelas yang berisi elemen yang disalin dari koleksi yang ditentukan dan memiliki kapasitas yang cukup untuk mengakomodasi jumlah elemen yang disalin.

public:
 List(System::Collections::Generic::IEnumerable<T> ^ collection);
public List (System.Collections.Generic.IEnumerable<T> collection);
new System.Collections.Generic.List<'T> : seq<'T> -> System.Collections.Generic.List<'T>
Public Sub New (collection As IEnumerable(Of T))

Parameter

collection
IEnumerable<T>

Koleksi yang elemennya disalin ke daftar baru.

Pengecualian

collectionadalah null.

Contoh

Contoh berikut menunjukkan List<T> konstruktor dan berbagai metode List<T> kelas yang bertindak berdasarkan rentang. Array string dibuat dan diteruskan ke konstruktor, mengisi daftar dengan elemen array. Properti Capacity kemudian ditampilkan, untuk menunjukkan bahwa kapasitas awal adalah apa yang diperlukan untuk menahan elemen input.

using namespace System;
using namespace System::Collections::Generic;

void main()
{
    array<String^>^ input = { "Brachiosaurus", 
                              "Amargasaurus", 
                              "Mamenchisaurus" };

    List<String^>^ dinosaurs = 
        gcnew List<String^>((IEnumerable<String^>^) input);

    Console::WriteLine("\nCapacity: {0}", dinosaurs->Capacity);

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    Console::WriteLine("\nAddRange(dinosaurs)");
    dinosaurs->AddRange(dinosaurs);

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    Console::WriteLine("\nRemoveRange(2, 2)");
    dinosaurs->RemoveRange(2, 2);

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    input = gcnew array<String^> { "Tyrannosaurus", 
                                   "Deinonychus", 
                                   "Velociraptor"};

    Console::WriteLine("\nInsertRange(3, (IEnumerable<String^>^) input)");
    dinosaurs->InsertRange(3, (IEnumerable<String^>^) input);

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    Console::WriteLine("\noutput = dinosaurs->GetRange(2, 3)->ToArray()");
    array<String^>^ output = dinosaurs->GetRange(2, 3)->ToArray();
        
    Console::WriteLine();
    for each(String^ dinosaur in output )
    {
        Console::WriteLine(dinosaur);
    }
}

/* This code example produces the following output:

Capacity: 3

Brachiosaurus
Amargasaurus
Mamenchisaurus

AddRange(dinosaurs)

Brachiosaurus
Amargasaurus
Mamenchisaurus
Brachiosaurus
Amargasaurus
Mamenchisaurus

RemoveRange(2, 2)

Brachiosaurus
Amargasaurus
Amargasaurus
Mamenchisaurus

InsertRange(3, (IEnumerable<String^>^) input)

Brachiosaurus
Amargasaurus
Amargasaurus
Tyrannosaurus
Deinonychus
Velociraptor
Mamenchisaurus

output = dinosaurs->GetRange(2, 3)->ToArray()

Amargasaurus
Tyrannosaurus
Deinonychus
 */
using System;
using System.Collections.Generic;

public class Example
{
    public static void Main()
    {
        string[] input = { "Brachiosaurus",
                           "Amargasaurus",
                           "Mamenchisaurus" };

        List<string> dinosaurs = new List<string>(input);

        Console.WriteLine("\nCapacity: {0}", dinosaurs.Capacity);

        Console.WriteLine();
        foreach( string dinosaur in dinosaurs )
        {
            Console.WriteLine(dinosaur);
        }

        Console.WriteLine("\nAddRange(dinosaurs)");
        dinosaurs.AddRange(dinosaurs);

        Console.WriteLine();
        foreach( string dinosaur in dinosaurs )
        {
            Console.WriteLine(dinosaur);
        }

        Console.WriteLine("\nRemoveRange(2, 2)");
        dinosaurs.RemoveRange(2, 2);

        Console.WriteLine();
        foreach( string dinosaur in dinosaurs )
        {
            Console.WriteLine(dinosaur);
        }

        input = new string[] { "Tyrannosaurus",
                               "Deinonychus",
                               "Velociraptor"};

        Console.WriteLine("\nInsertRange(3, input)");
        dinosaurs.InsertRange(3, input);

        Console.WriteLine();
        foreach( string dinosaur in dinosaurs )
        {
            Console.WriteLine(dinosaur);
        }

        Console.WriteLine("\noutput = dinosaurs.GetRange(2, 3).ToArray()");
        string[] output = dinosaurs.GetRange(2, 3).ToArray();

        Console.WriteLine();
        foreach( string dinosaur in output )
        {
            Console.WriteLine(dinosaur);
        }
    }
}

/* This code example produces the following output:

Capacity: 3

Brachiosaurus
Amargasaurus
Mamenchisaurus

AddRange(dinosaurs)

Brachiosaurus
Amargasaurus
Mamenchisaurus
Brachiosaurus
Amargasaurus
Mamenchisaurus

RemoveRange(2, 2)

Brachiosaurus
Amargasaurus
Amargasaurus
Mamenchisaurus

InsertRange(3, input)

Brachiosaurus
Amargasaurus
Amargasaurus
Tyrannosaurus
Deinonychus
Velociraptor
Mamenchisaurus

output = dinosaurs.GetRange(2, 3).ToArray()

Amargasaurus
Tyrannosaurus
Deinonychus
 */
Imports System.Collections.Generic

Public Class Example

    Public Shared Sub Main()

        Dim input() As String = { "Brachiosaurus", _
                                  "Amargasaurus", _
                                  "Mamenchisaurus" }

        Dim dinosaurs As New List(Of String)(input)

        Console.WriteLine(vbLf & "Capacity: {0}", dinosaurs.Capacity)

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next

        Console.WriteLine(vbLf & "AddRange(dinosaurs)")
        dinosaurs.AddRange(dinosaurs)

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next

        Console.WriteLine(vbLf & "RemoveRange(2, 2)")
        dinosaurs.RemoveRange(2, 2)

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next

        input = New String() { "Tyrannosaurus", _
                               "Deinonychus", _
                               "Velociraptor" }

        Console.WriteLine(vbLf & "InsertRange(3, input)")
        dinosaurs.InsertRange(3, input)

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next

        Console.WriteLine(vbLf & "output = dinosaurs.GetRange(2, 3).ToArray")
        Dim output() As String = dinosaurs.GetRange(2, 3).ToArray()
        
        Console.WriteLine()
        For Each dinosaur As String In output
            Console.WriteLine(dinosaur)
        Next

    End Sub
End Class

' This code example produces the following output:
'
'Capacity: 3
'
'Brachiosaurus
'Amargasaurus
'Mamenchisaurus
'
'AddRange(dinosaurs)
'
'Brachiosaurus
'Amargasaurus
'Mamenchisaurus
'Brachiosaurus
'Amargasaurus
'Mamenchisaurus
'
'RemoveRange(2, 2)
'
'Brachiosaurus
'Amargasaurus
'Amargasaurus
'Mamenchisaurus
'
'InsertRange(3, input)
'
'Brachiosaurus
'Amargasaurus
'Amargasaurus
'Tyrannosaurus
'Deinonychus
'Velociraptor
'Mamenchisaurus
'
'output = dinosaurs.GetRange(2, 3).ToArray
'
'Amargasaurus
'Tyrannosaurus
'Deinonychus

Keterangan

Elemen disalin ke List<T> dalam urutan yang sama yang dibaca oleh enumerator koleksi.

Konstruktor ini adalah operasi O(n), di mana n adalah jumlah elemen dalam collection.

Lihat juga

Berlaku untuk

List<T>(Int32)

Sumber:
List.cs
Sumber:
List.cs
Sumber:
List.cs

Menginisialisasi instans baru kelas List<T> yang kosong dan memiliki kapasitas awal yang ditentukan.

public:
 List(int capacity);
public List (int capacity);
new System.Collections.Generic.List<'T> : int -> System.Collections.Generic.List<'T>
Public Sub New (capacity As Integer)

Parameter

capacity
Int32

Jumlah elemen yang awalnya dapat disimpan oleh daftar baru.

Pengecualian

capacity kurang dari 0.

Contoh

Contoh berikut menunjukkan List<T>(Int32) konstruktor. List<T> String dengan kapasitas 4 dibuat, karena ukuran akhir daftar diketahui tepat 4. Daftar diisi dengan empat string, dan salinan baca-saja dibuat dengan menggunakan AsReadOnly metode .

using namespace System;
using namespace System::Collections::Generic;

void main()
{
    List<String^>^ dinosaurs = gcnew List<String^>(4);

    Console::WriteLine("\nCapacity: {0}", dinosaurs->Capacity);

    dinosaurs->Add("Tyrannosaurus");
    dinosaurs->Add("Amargasaurus");
    dinosaurs->Add("Mamenchisaurus");
    dinosaurs->Add("Deinonychus");

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs)
    {
        Console::WriteLine(dinosaur);
    }

    Console::WriteLine("\nIList<String^>^ roDinosaurs = dinosaurs->AsReadOnly()");
    IList<String^>^ roDinosaurs = dinosaurs->AsReadOnly();

    Console::WriteLine("\nElements in the read-only IList:");
    for each(String^ dinosaur in roDinosaurs)
    {
        Console::WriteLine(dinosaur);
    }

    Console::WriteLine("\ndinosaurs[2] = \"Coelophysis\"");
    dinosaurs[2] = "Coelophysis";

    Console::WriteLine("\nElements in the read-only IList:");
    for each(String^ dinosaur in roDinosaurs)
    {
        Console::WriteLine(dinosaur);
    }
}

/* This code example produces the following output:

Capacity: 4

Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus

IList<String^>^ roDinosaurs = dinosaurs->AsReadOnly()

Elements in the read-only IList:
Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus

dinosaurs[2] = "Coelophysis"

Elements in the read-only IList:
Tyrannosaurus
Amargasaurus
Coelophysis
Deinonychus
 */
using System;
using System.Collections.Generic;

public class Example
{
    public static void Main()
    {
        List<string> dinosaurs = new List<string>(4);

        Console.WriteLine("\nCapacity: {0}", dinosaurs.Capacity);

        dinosaurs.Add("Tyrannosaurus");
        dinosaurs.Add("Amargasaurus");
        dinosaurs.Add("Mamenchisaurus");
        dinosaurs.Add("Deinonychus");

        Console.WriteLine();
        foreach(string s in dinosaurs)
        {
            Console.WriteLine(s);
        }

        Console.WriteLine("\nIList<string> roDinosaurs = dinosaurs.AsReadOnly()");
        IList<string> roDinosaurs = dinosaurs.AsReadOnly();

        Console.WriteLine("\nElements in the read-only IList:");
        foreach(string dinosaur in roDinosaurs)
        {
            Console.WriteLine(dinosaur);
        }

        Console.WriteLine("\ndinosaurs[2] = \"Coelophysis\"");
        dinosaurs[2] = "Coelophysis";

        Console.WriteLine("\nElements in the read-only IList:");
        foreach(string dinosaur in roDinosaurs)
        {
            Console.WriteLine(dinosaur);
        }
    }
}

/* This code example produces the following output:

Capacity: 4

Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus

IList<string> roDinosaurs = dinosaurs.AsReadOnly()

Elements in the read-only IList:
Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus

dinosaurs[2] = "Coelophysis"

Elements in the read-only IList:
Tyrannosaurus
Amargasaurus
Coelophysis
Deinonychus
 */
Imports System.Collections.Generic

Public Class Example

    Public Shared Sub Main()

        Dim dinosaurs As New List(Of String)(4)

        Console.WriteLine(vbLf & "Capacity: {0}", dinosaurs.Capacity)

        dinosaurs.Add("Tyrannosaurus")
        dinosaurs.Add("Amargasaurus")
        dinosaurs.Add("Mamenchisaurus")
        dinosaurs.Add("Deinonychus")

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next

        Console.WriteLine(vbLf & _
            "Dim roDinosaurs As IList(Of String) = dinosaurs.AsReadOnly")
        Dim roDinosaurs As IList(Of String) = dinosaurs.AsReadOnly

        Console.WriteLine(vbLf & "Elements in the read-only IList:")
        For Each dinosaur As String In roDinosaurs
            Console.WriteLine(dinosaur)
        Next

        Console.WriteLine(vbLf & "dinosaurs(2) = ""Coelophysis""")
        dinosaurs(2) = "Coelophysis"

        Console.WriteLine(vbLf & "Elements in the read-only IList:")
        For Each dinosaur As String In roDinosaurs
            Console.WriteLine(dinosaur)
        Next

    End Sub
End Class

' This code example produces the following output:
'
'Capacity: 4
'
'Tyrannosaurus
'Amargasaurus
'Mamenchisaurus
'Deinonychus
'
'Dim roDinosaurs As IList(Of String) = dinosaurs.AsReadOnly
'
'Elements in the read-only IList:
'Tyrannosaurus
'Amargasaurus
'Mamenchisaurus
'Deinonychus
'
'dinosaurs(2) = "Coelophysis"
'
'Elements in the read-only IList:
'Tyrannosaurus
'Amargasaurus
'Coelophysis
'Deinonychus

Keterangan

Kapasitas a List<T> adalah jumlah elemen yang dapat dipegang List<T> . Saat elemen ditambahkan ke List<T>, kapasitas secara otomatis ditingkatkan sesuai kebutuhan dengan merealokasi array internal.

Jika ukuran koleksi dapat diperkirakan, menentukan kapasitas awal menghilangkan kebutuhan untuk melakukan sejumlah operasi pengubahan ukuran sambil menambahkan elemen ke List<T>.

Kapasitas dapat dikurangi dengan memanggil TrimExcess metode atau dengan mengatur Capacity properti secara eksplisit. Mengurangi kapasitas mengalokasikan memori dan menyalin semua elemen di List<T>.

Konstruktor ini adalah operasi O(1).

Lihat juga

Berlaku untuk