BitVector32.CreateSection メソッド

定義

小さい整数が格納された一連のセクションを作成します。Creates a series of sections that contain small integers.

オーバーロード

CreateSection(Int16)

小さい整数が格納された一連のセクションのうちの、最初の BitVector32.Section を作成します。Creates the first BitVector32.Section in a series of sections that contain small integers.

CreateSection(Int16, BitVector32+Section)

小さい整数が格納された一連のセクションのうちの指定した BitVector32.Section の次に、新しい BitVector32.Section を作成します。Creates a new BitVector32.Section following the specified BitVector32.Section in a series of sections that contain small integers.

CreateSection(Int16)

小さい整数が格納された一連のセクションのうちの、最初の BitVector32.Section を作成します。Creates the first BitVector32.Section in a series of sections that contain small integers.

public:
 static System::Collections::Specialized::BitVector32::Section CreateSection(short maxValue);
public static System.Collections.Specialized.BitVector32.Section CreateSection (short maxValue);
static member CreateSection : int16 -> System.Collections.Specialized.BitVector32.Section
Public Shared Function CreateSection (maxValue As Short) As BitVector32.Section

パラメーター

maxValue
Int16

新しい BitVector32.Section の最大値を指定する 16 ビット符号付き整数。A 16-bit signed integer that specifies the maximum value for the new BitVector32.Section.

戻り値

0 から maxValue までの範囲の数値を格納できる BitVector32.SectionA BitVector32.Section that can hold a number from zero to maxValue.

例外

maxValue が 1 未満です。maxValue is less than 1.

次のコード例ではBitVector32 、をセクションのコレクションとして使用します。The following code example uses a BitVector32 as a collection of sections.

#using <system.dll>

using namespace System;
using namespace System::Collections::Specialized;

int main()
{
   // Creates and initializes a BitVector32.
   BitVector32 myBV(0);

   // Creates four sections in the BitVector32 with maximum values 6, 3, 1, and 15.
   // mySect3, which uses exactly one bit, can also be used as a bit flag.
   BitVector32::Section mySect1 = BitVector32::CreateSection( 6 );
   BitVector32::Section mySect2 = BitVector32::CreateSection( 3, mySect1 );
   BitVector32::Section mySect3 = BitVector32::CreateSection( 1, mySect2 );
   BitVector32::Section mySect4 = BitVector32::CreateSection( 15, mySect3 );

   // Displays the values of the sections.
   Console::WriteLine( "Initial values:" );
   Console::WriteLine( "\tmySect1: {0}", myBV[ mySect1 ] );
   Console::WriteLine( "\tmySect2: {0}", myBV[ mySect2 ] );
   Console::WriteLine( "\tmySect3: {0}", myBV[ mySect3 ] );
   Console::WriteLine( "\tmySect4: {0}", myBV[ mySect4 ] );

   // Sets each section to a new value and displays the value of the BitVector32 at each step.
   Console::WriteLine( "Changing the values of each section:" );
   Console::WriteLine( "\tInitial:    \t {0}", myBV );
   myBV[ mySect1 ] = 5;
   Console::WriteLine( "\tmySect1 = 5:\t {0}", myBV );
   myBV[ mySect2 ] = 3;
   Console::WriteLine( "\tmySect2 = 3:\t {0}", myBV );
   myBV[ mySect3 ] = 1;
   Console::WriteLine( "\tmySect3 = 1:\t {0}", myBV );
   myBV[ mySect4 ] = 9;
   Console::WriteLine( "\tmySect4 = 9:\t {0}", myBV );

   // Displays the values of the sections.
   Console::WriteLine( "New values:" );
   Console::WriteLine( "\tmySect1: {0}", myBV[ mySect1 ] );
   Console::WriteLine( "\tmySect2: {0}", myBV[ mySect2 ] );
   Console::WriteLine( "\tmySect3: {0}", myBV[ mySect3 ] );
   Console::WriteLine( "\tmySect4: {0}", myBV[ mySect4 ] );
}

/*
This code produces the following output.

Initial values:
        mySect1: 0
        mySect2: 0
        mySect3: 0
        mySect4: 0
Changing the values of each section:
        Initial:        BitVector32 {00000000000000000000000000000000}
        mySect1 = 5:    BitVector32 {00000000000000000000000000000101}
        mySect2 = 3:    BitVector32 {00000000000000000000000000011101}
        mySect3 = 1:    BitVector32 {00000000000000000000000000111101}
        mySect4 = 9:    BitVector32 {00000000000000000000001001111101}
New values:
        mySect1: 5
        mySect2: 3
        mySect3: 1
        mySect4: 9

*/
using System;
using System.Collections.Specialized;


public class SamplesBitVector32  {

   public static void Main()  {

      // Creates and initializes a BitVector32.
      BitVector32 myBV = new BitVector32( 0 );

      // Creates four sections in the BitVector32 with maximum values 6, 3, 1, and 15.
      // mySect3, which uses exactly one bit, can also be used as a bit flag.
      BitVector32.Section mySect1 = BitVector32.CreateSection( 6 );
      BitVector32.Section mySect2 = BitVector32.CreateSection( 3, mySect1 );
      BitVector32.Section mySect3 = BitVector32.CreateSection( 1, mySect2 );
      BitVector32.Section mySect4 = BitVector32.CreateSection( 15, mySect3 );

      // Displays the values of the sections.
      Console.WriteLine( "Initial values:" );
      Console.WriteLine( "\tmySect1: {0}", myBV[mySect1] );
      Console.WriteLine( "\tmySect2: {0}", myBV[mySect2] );
      Console.WriteLine( "\tmySect3: {0}", myBV[mySect3] );
      Console.WriteLine( "\tmySect4: {0}", myBV[mySect4] );

      // Sets each section to a new value and displays the value of the BitVector32 at each step.
      Console.WriteLine( "Changing the values of each section:" );
      Console.WriteLine( "\tInitial:    \t{0}", myBV.ToString() );
      myBV[mySect1] = 5;
      Console.WriteLine( "\tmySect1 = 5:\t{0}", myBV.ToString() );
      myBV[mySect2] = 3;
      Console.WriteLine( "\tmySect2 = 3:\t{0}", myBV.ToString() );
      myBV[mySect3] = 1;
      Console.WriteLine( "\tmySect3 = 1:\t{0}", myBV.ToString() );
      myBV[mySect4] = 9;
      Console.WriteLine( "\tmySect4 = 9:\t{0}", myBV.ToString() );

      // Displays the values of the sections.
      Console.WriteLine( "New values:" );
      Console.WriteLine( "\tmySect1: {0}", myBV[mySect1] );
      Console.WriteLine( "\tmySect2: {0}", myBV[mySect2] );
      Console.WriteLine( "\tmySect3: {0}", myBV[mySect3] );
      Console.WriteLine( "\tmySect4: {0}", myBV[mySect4] );

   }

}

/*
This code produces the following output.

Initial values:
        mySect1: 0
        mySect2: 0
        mySect3: 0
        mySect4: 0
Changing the values of each section:
        Initial:        BitVector32{00000000000000000000000000000000}
        mySect1 = 5:    BitVector32{00000000000000000000000000000101}
        mySect2 = 3:    BitVector32{00000000000000000000000000011101}
        mySect3 = 1:    BitVector32{00000000000000000000000000111101}
        mySect4 = 9:    BitVector32{00000000000000000000001001111101}
New values:
        mySect1: 5
        mySect2: 3
        mySect3: 1
        mySect4: 9

*/
Imports System.Collections.Specialized

Public Class SamplesBitVector32
   
   Public Shared Sub Main()
      
      ' Creates and initializes a BitVector32.
      Dim myBV As New BitVector32(0)
      
      ' Creates four sections in the BitVector32 with maximum values 6, 3, 1, and 15.
      ' mySect3, which uses exactly one bit, can also be used as a bit flag.
      Dim mySect1 As BitVector32.Section = BitVector32.CreateSection(6)
      Dim mySect2 As BitVector32.Section = BitVector32.CreateSection(3, mySect1)
      Dim mySect3 As BitVector32.Section = BitVector32.CreateSection(1, mySect2)
      Dim mySect4 As BitVector32.Section = BitVector32.CreateSection(15, mySect3)
      
      ' Displays the values of the sections.
      Console.WriteLine("Initial values:")
      Console.WriteLine(ControlChars.Tab + "mySect1: {0}", myBV(mySect1))
      Console.WriteLine(ControlChars.Tab + "mySect2: {0}", myBV(mySect2))
      Console.WriteLine(ControlChars.Tab + "mySect3: {0}", myBV(mySect3))
      Console.WriteLine(ControlChars.Tab + "mySect4: {0}", myBV(mySect4))
      
      ' Sets each section to a new value and displays the value of the BitVector32 at each step.
      Console.WriteLine("Changing the values of each section:")
      Console.WriteLine(ControlChars.Tab + "Initial:    " + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect1) = 5
      Console.WriteLine(ControlChars.Tab + "mySect1 = 5:" + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect2) = 3
      Console.WriteLine(ControlChars.Tab + "mySect2 = 3:" + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect3) = 1
      Console.WriteLine(ControlChars.Tab + "mySect3 = 1:" + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect4) = 9
      Console.WriteLine(ControlChars.Tab + "mySect4 = 9:" + ControlChars.Tab + "{0}", myBV.ToString())
      
      ' Displays the values of the sections.
      Console.WriteLine("New values:")
      Console.WriteLine(ControlChars.Tab + "mySect1: {0}", myBV(mySect1))
      Console.WriteLine(ControlChars.Tab + "mySect2: {0}", myBV(mySect2))
      Console.WriteLine(ControlChars.Tab + "mySect3: {0}", myBV(mySect3))
      Console.WriteLine(ControlChars.Tab + "mySect4: {0}", myBV(mySect4))

   End Sub

End Class


' This code produces the following output.
'
' Initial values:
'        mySect1: 0
'        mySect2: 0
'        mySect3: 0
'        mySect4: 0
' Changing the values of each section:
'        Initial:        BitVector32{00000000000000000000000000000000}
'        mySect1 = 5:    BitVector32{00000000000000000000000000000101}
'        mySect2 = 3:    BitVector32{00000000000000000000000000011101}
'        mySect3 = 1:    BitVector32{00000000000000000000000000111101}
'        mySect4 = 9:    BitVector32{00000000000000000000001001111101}
' New values:
'        mySect1: 5
'        mySect2: 3
'        mySect3: 1
'        mySect4: 9

注釈

はのBitVector32ウィンドウであり、にCreateSection指定された最大値を含むことができる連続したビットの最小数で構成されます。 BitVector32.SectionA BitVector32.Section is a window into the BitVector32 and is composed of the smallest number of consecutive bits that can contain the maximum value specified in CreateSection. たとえば、最大値が1のセクションは1ビットのみで構成され、最大値が5のセクションは3ビットで構成されます。For example, a section with a maximum value of 1 is composed of only one bit, whereas a section with a maximum value of 5 is composed of three bits. 最大値1をBitVector32.Section持つを作成し、ブール値として機能させることができます。これにより、整数BitVector32とブール値を同じに格納することができます。You can create a BitVector32.Section with a maximum value of 1 to serve as a Boolean, thereby allowing you to store integers and Booleans in the same BitVector32.

セクションが既にに存在BitVector32する場合、これらのセクションには引き続きアクセスできます。ただし、セクションが重複すると、予期しない結果が発生する可能性があります。If sections already exist in the BitVector32, those sections are still accessible; however, overlapping sections might cause unexpected results.

このメソッドは、O(1) 操作です。This method is an O(1) operation.

CreateSection(Int16, BitVector32+Section)

小さい整数が格納された一連のセクションのうちの指定した BitVector32.Section の次に、新しい BitVector32.Section を作成します。Creates a new BitVector32.Section following the specified BitVector32.Section in a series of sections that contain small integers.

public:
 static System::Collections::Specialized::BitVector32::Section CreateSection(short maxValue, System::Collections::Specialized::BitVector32::Section previous);
public static System.Collections.Specialized.BitVector32.Section CreateSection (short maxValue, System.Collections.Specialized.BitVector32.Section previous);
static member CreateSection : int16 * System.Collections.Specialized.BitVector32.Section -> System.Collections.Specialized.BitVector32.Section
Public Shared Function CreateSection (maxValue As Short, previous As BitVector32.Section) As BitVector32.Section

パラメーター

maxValue
Int16

新しい BitVector32.Section の最大値を指定する 16 ビット符号付き整数。A 16-bit signed integer that specifies the maximum value for the new BitVector32.Section.

previous
BitVector32.Section

BitVector32.Section 内の 1 つ前の BitVector32The previous BitVector32.Section in the BitVector32.

戻り値

0 から maxValue までの範囲の数値を格納できる BitVector32.SectionA BitVector32.Section that can hold a number from zero to maxValue.

例外

maxValue が 1 未満です。maxValue is less than 1.

previousBitVector32 の最後のビットが含まれています。previous includes the final bit in the BitVector32.

または-or- maxValue が、previous の後のビット数で表すことができる最大値を超えています。maxValue is greater than the highest value that can be represented by the number of bits after previous.

次のコード例ではBitVector32 、をセクションのコレクションとして使用します。The following code example uses a BitVector32 as a collection of sections.

#using <system.dll>

using namespace System;
using namespace System::Collections::Specialized;

int main()
{
   // Creates and initializes a BitVector32.
   BitVector32 myBV(0);

   // Creates four sections in the BitVector32 with maximum values 6, 3, 1, and 15.
   // mySect3, which uses exactly one bit, can also be used as a bit flag.
   BitVector32::Section mySect1 = BitVector32::CreateSection( 6 );
   BitVector32::Section mySect2 = BitVector32::CreateSection( 3, mySect1 );
   BitVector32::Section mySect3 = BitVector32::CreateSection( 1, mySect2 );
   BitVector32::Section mySect4 = BitVector32::CreateSection( 15, mySect3 );

   // Displays the values of the sections.
   Console::WriteLine( "Initial values:" );
   Console::WriteLine( "\tmySect1: {0}", myBV[ mySect1 ] );
   Console::WriteLine( "\tmySect2: {0}", myBV[ mySect2 ] );
   Console::WriteLine( "\tmySect3: {0}", myBV[ mySect3 ] );
   Console::WriteLine( "\tmySect4: {0}", myBV[ mySect4 ] );

   // Sets each section to a new value and displays the value of the BitVector32 at each step.
   Console::WriteLine( "Changing the values of each section:" );
   Console::WriteLine( "\tInitial:    \t {0}", myBV );
   myBV[ mySect1 ] = 5;
   Console::WriteLine( "\tmySect1 = 5:\t {0}", myBV );
   myBV[ mySect2 ] = 3;
   Console::WriteLine( "\tmySect2 = 3:\t {0}", myBV );
   myBV[ mySect3 ] = 1;
   Console::WriteLine( "\tmySect3 = 1:\t {0}", myBV );
   myBV[ mySect4 ] = 9;
   Console::WriteLine( "\tmySect4 = 9:\t {0}", myBV );

   // Displays the values of the sections.
   Console::WriteLine( "New values:" );
   Console::WriteLine( "\tmySect1: {0}", myBV[ mySect1 ] );
   Console::WriteLine( "\tmySect2: {0}", myBV[ mySect2 ] );
   Console::WriteLine( "\tmySect3: {0}", myBV[ mySect3 ] );
   Console::WriteLine( "\tmySect4: {0}", myBV[ mySect4 ] );
}

/*
This code produces the following output.

Initial values:
        mySect1: 0
        mySect2: 0
        mySect3: 0
        mySect4: 0
Changing the values of each section:
        Initial:        BitVector32 {00000000000000000000000000000000}
        mySect1 = 5:    BitVector32 {00000000000000000000000000000101}
        mySect2 = 3:    BitVector32 {00000000000000000000000000011101}
        mySect3 = 1:    BitVector32 {00000000000000000000000000111101}
        mySect4 = 9:    BitVector32 {00000000000000000000001001111101}
New values:
        mySect1: 5
        mySect2: 3
        mySect3: 1
        mySect4: 9

*/
using System;
using System.Collections.Specialized;


public class SamplesBitVector32  {

   public static void Main()  {

      // Creates and initializes a BitVector32.
      BitVector32 myBV = new BitVector32( 0 );

      // Creates four sections in the BitVector32 with maximum values 6, 3, 1, and 15.
      // mySect3, which uses exactly one bit, can also be used as a bit flag.
      BitVector32.Section mySect1 = BitVector32.CreateSection( 6 );
      BitVector32.Section mySect2 = BitVector32.CreateSection( 3, mySect1 );
      BitVector32.Section mySect3 = BitVector32.CreateSection( 1, mySect2 );
      BitVector32.Section mySect4 = BitVector32.CreateSection( 15, mySect3 );

      // Displays the values of the sections.
      Console.WriteLine( "Initial values:" );
      Console.WriteLine( "\tmySect1: {0}", myBV[mySect1] );
      Console.WriteLine( "\tmySect2: {0}", myBV[mySect2] );
      Console.WriteLine( "\tmySect3: {0}", myBV[mySect3] );
      Console.WriteLine( "\tmySect4: {0}", myBV[mySect4] );

      // Sets each section to a new value and displays the value of the BitVector32 at each step.
      Console.WriteLine( "Changing the values of each section:" );
      Console.WriteLine( "\tInitial:    \t{0}", myBV.ToString() );
      myBV[mySect1] = 5;
      Console.WriteLine( "\tmySect1 = 5:\t{0}", myBV.ToString() );
      myBV[mySect2] = 3;
      Console.WriteLine( "\tmySect2 = 3:\t{0}", myBV.ToString() );
      myBV[mySect3] = 1;
      Console.WriteLine( "\tmySect3 = 1:\t{0}", myBV.ToString() );
      myBV[mySect4] = 9;
      Console.WriteLine( "\tmySect4 = 9:\t{0}", myBV.ToString() );

      // Displays the values of the sections.
      Console.WriteLine( "New values:" );
      Console.WriteLine( "\tmySect1: {0}", myBV[mySect1] );
      Console.WriteLine( "\tmySect2: {0}", myBV[mySect2] );
      Console.WriteLine( "\tmySect3: {0}", myBV[mySect3] );
      Console.WriteLine( "\tmySect4: {0}", myBV[mySect4] );

   }

}

/*
This code produces the following output.

Initial values:
        mySect1: 0
        mySect2: 0
        mySect3: 0
        mySect4: 0
Changing the values of each section:
        Initial:        BitVector32{00000000000000000000000000000000}
        mySect1 = 5:    BitVector32{00000000000000000000000000000101}
        mySect2 = 3:    BitVector32{00000000000000000000000000011101}
        mySect3 = 1:    BitVector32{00000000000000000000000000111101}
        mySect4 = 9:    BitVector32{00000000000000000000001001111101}
New values:
        mySect1: 5
        mySect2: 3
        mySect3: 1
        mySect4: 9

*/
Imports System.Collections.Specialized

Public Class SamplesBitVector32
   
   Public Shared Sub Main()
      
      ' Creates and initializes a BitVector32.
      Dim myBV As New BitVector32(0)
      
      ' Creates four sections in the BitVector32 with maximum values 6, 3, 1, and 15.
      ' mySect3, which uses exactly one bit, can also be used as a bit flag.
      Dim mySect1 As BitVector32.Section = BitVector32.CreateSection(6)
      Dim mySect2 As BitVector32.Section = BitVector32.CreateSection(3, mySect1)
      Dim mySect3 As BitVector32.Section = BitVector32.CreateSection(1, mySect2)
      Dim mySect4 As BitVector32.Section = BitVector32.CreateSection(15, mySect3)
      
      ' Displays the values of the sections.
      Console.WriteLine("Initial values:")
      Console.WriteLine(ControlChars.Tab + "mySect1: {0}", myBV(mySect1))
      Console.WriteLine(ControlChars.Tab + "mySect2: {0}", myBV(mySect2))
      Console.WriteLine(ControlChars.Tab + "mySect3: {0}", myBV(mySect3))
      Console.WriteLine(ControlChars.Tab + "mySect4: {0}", myBV(mySect4))
      
      ' Sets each section to a new value and displays the value of the BitVector32 at each step.
      Console.WriteLine("Changing the values of each section:")
      Console.WriteLine(ControlChars.Tab + "Initial:    " + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect1) = 5
      Console.WriteLine(ControlChars.Tab + "mySect1 = 5:" + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect2) = 3
      Console.WriteLine(ControlChars.Tab + "mySect2 = 3:" + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect3) = 1
      Console.WriteLine(ControlChars.Tab + "mySect3 = 1:" + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect4) = 9
      Console.WriteLine(ControlChars.Tab + "mySect4 = 9:" + ControlChars.Tab + "{0}", myBV.ToString())
      
      ' Displays the values of the sections.
      Console.WriteLine("New values:")
      Console.WriteLine(ControlChars.Tab + "mySect1: {0}", myBV(mySect1))
      Console.WriteLine(ControlChars.Tab + "mySect2: {0}", myBV(mySect2))
      Console.WriteLine(ControlChars.Tab + "mySect3: {0}", myBV(mySect3))
      Console.WriteLine(ControlChars.Tab + "mySect4: {0}", myBV(mySect4))

   End Sub

End Class


' This code produces the following output.
'
' Initial values:
'        mySect1: 0
'        mySect2: 0
'        mySect3: 0
'        mySect4: 0
' Changing the values of each section:
'        Initial:        BitVector32{00000000000000000000000000000000}
'        mySect1 = 5:    BitVector32{00000000000000000000000000000101}
'        mySect2 = 3:    BitVector32{00000000000000000000000000011101}
'        mySect3 = 1:    BitVector32{00000000000000000000000000111101}
'        mySect4 = 9:    BitVector32{00000000000000000000001001111101}
' New values:
'        mySect1: 5
'        mySect2: 3
'        mySect3: 1
'        mySect4: 9

注釈

はのBitVector32ウィンドウであり、にCreateSection指定された最大値を含むことができる連続したビットの最小数で構成されます。 BitVector32.SectionA BitVector32.Section is a window into the BitVector32 and is composed of the smallest number of consecutive bits that can contain the maximum value specified in CreateSection. たとえば、最大値が1のセクションは1ビットのみで構成され、最大値が5のセクションは3ビットで構成されます。For example, a section with a maximum value of 1 is composed of only one bit, whereas a section with a maximum value of 5 is composed of three bits. 最大値1をBitVector32.Section持つを作成し、ブール値として機能させることができます。これにより、整数BitVector32とブール値を同じに格納することができます。You can create a BitVector32.Section with a maximum value of 1 to serve as a Boolean, thereby allowing you to store integers and Booleans in the same BitVector32.

の後previousにセクションが既にBitVector32存在する場合、これらのセクションには引き続きアクセスできます。ただし、セクションが重複すると、予期しない結果が発生する可能性があります。If sections already exist after previous in the BitVector32, those sections are still accessible; however, overlapping sections might cause unexpected results.

このメソッドは、O(1) 操作です。This method is an O(1) operation.

適用対象