次の方法で共有


ConfigurationManager.OpenExeConfiguration メソッド

定義

指定したクライアント構成ファイルを Configuration オブジェクトとして開きます。

オーバーロード

OpenExeConfiguration(ConfigurationUserLevel)

現在のアプリケーションの構成ファイルを Configuration オブジェクトとして開きます。

OpenExeConfiguration(String)

指定したクライアント構成ファイルを Configuration オブジェクトとして開きます。

OpenExeConfiguration(ConfigurationUserLevel)

ソース:
ConfigurationManager.cs
ソース:
ConfigurationManager.cs
ソース:
ConfigurationManager.cs

現在のアプリケーションの構成ファイルを Configuration オブジェクトとして開きます。

public:
 static System::Configuration::Configuration ^ OpenExeConfiguration(System::Configuration::ConfigurationUserLevel userLevel);
public static System.Configuration.Configuration OpenExeConfiguration (System.Configuration.ConfigurationUserLevel userLevel);
static member OpenExeConfiguration : System.Configuration.ConfigurationUserLevel -> System.Configuration.Configuration
Public Shared Function OpenExeConfiguration (userLevel As ConfigurationUserLevel) As Configuration

パラメーター

userLevel
ConfigurationUserLevel

構成を開く対象のユーザー レベルを指定する列挙値の 1 つ。

戻り値

現在のアプリケーションに対する構成ファイル。

例外

構成ファイルを読み込めませんでした。

OpenExeConfiguration メソッドを使用するコード例を次に示します。

// Get the roaming configuration file associated 
// with the application.
// This function uses the OpenExeConfiguration(
// ConfigurationUserLevel userLevel) method to 
// get the configuration file.
// It also creates a custom ConsoleSection and 
// sets its ConsoleElement BackgroundColor and
// ForegroundColor properties to blue and yellow
// respectively. Then it uses these properties to
// set the console colors.  
public static void GetRoamingConfiguration()
{
  // Define the custom section to add to the
  // configuration file.
  string sectionName = "consoleSection";
  ConsoleSection currentSection = null;
  
  // Get the roaming configuration 
  // that applies to the current user.
  Configuration roamingConfig =
    ConfigurationManager.OpenExeConfiguration(
     ConfigurationUserLevel.PerUserRoaming);

  // Map the roaming configuration file. This
  // enables the application to access 
  // the configuration file using the
  // System.Configuration.Configuration class
  ExeConfigurationFileMap configFileMap =
    new ExeConfigurationFileMap();
  configFileMap.ExeConfigFilename = 
    roamingConfig.FilePath;

  // Get the mapped configuration file.
  Configuration config =
    ConfigurationManager.OpenMappedExeConfiguration(
      configFileMap, ConfigurationUserLevel.None);
  
  try
    {
      currentSection =
           (ConsoleSection)config.GetSection(
             sectionName);

      // Synchronize the application configuration
      // if needed. The following two steps seem
      // to solve some out of synch issues 
      // between roaming and default
      // configuration.
      config.Save(ConfigurationSaveMode.Modified);

      // Force a reload of the changed section, 
      // if needed. This makes the new values available 
      // for reading.
      ConfigurationManager.RefreshSection(sectionName);

      if (currentSection == null)
      {
        // Create a custom configuration section.
        currentSection = new ConsoleSection();

        // Define where in the configuration file 
        // hierarchy the associated 
        // configuration section can be declared.
        // The following assignment assures that 
        // the configuration information can be 
        // defined in the user.config file in the 
        // roaming user directory. 
        currentSection.SectionInformation.AllowExeDefinition =
          ConfigurationAllowExeDefinition.MachineToLocalUser;

        // Allow the configuration section to be 
        // overridden by lower-level configuration files.
        // This means that lower-level files can contain
        // the section (use the same name) and assign 
        // different values to it as done by the
        // function GetApplicationConfiguration() in this
        // example.
        currentSection.SectionInformation.AllowOverride =
          true;

        // Store console settings for roaming users.
        currentSection.ConsoleElement.BackgroundColor =
            ConsoleColor.Blue;
        currentSection.ConsoleElement.ForegroundColor =
            ConsoleColor.Yellow;

        // Add configuration information to 
        // the configuration file.
        config.Sections.Add(sectionName, currentSection);
        config.Save(ConfigurationSaveMode.Modified);
        // Force a reload of the changed section. This 
        // makes the new values available for reading.
        ConfigurationManager.RefreshSection(
          sectionName);
      }
  }
  catch (ConfigurationErrorsException e)
  {
      Console.WriteLine("[Exception error: {0}]",
          e.ToString());
  }

  // Set console properties using values
  // stored in the configuration file.
  Console.BackgroundColor =
    currentSection.ConsoleElement.BackgroundColor;
  Console.ForegroundColor =
    currentSection.ConsoleElement.ForegroundColor;
  // Apply the changes.
  Console.Clear();

  // Display feedback.
  Console.WriteLine();
  Console.WriteLine(
    "Using OpenExeConfiguration(ConfigurationUserLevel).");
  Console.WriteLine(
      "Configuration file is: {0}", config.FilePath);
}
    ' Get the roaming configuration file associated 
    ' with the application.
    ' This function uses the OpenExeConfiguration(
    ' ConfigurationUserLevel userLevel) method to 
    ' get the configuration file.
    ' It also creates a custom ConsoleSection and 
' sets its ConsoleElement BackgroundColor and
    ' ForegroundColor properties to blue and yellow
    ' respectively. Then it uses these properties to
    ' set the console colors.  
    Public Shared Sub GetRoamingConfiguration()
        ' Define the custom section to add to the
        ' configuration file.
        Dim sectionName As String = "consoleSection"
        Dim currentSection As ConsoleSection = Nothing

        ' Get the roaming configuration 
        ' that applies to the current user.
        Dim roamingConfig As Configuration = _
        ConfigurationManager.OpenExeConfiguration( _
            ConfigurationUserLevel.PerUserRoaming)

        ' Map the roaming configuration file. This
        ' enables the application to access 
        ' the configuration file using the
        ' System.Configuration.Configuration class
        Dim configFileMap As New ExeConfigurationFileMap()
        configFileMap.ExeConfigFilename = _
            roamingConfig.FilePath

        ' Get the mapped configuration file.
        Dim config As Configuration = _
            ConfigurationManager.OpenMappedExeConfiguration( _
                configFileMap, ConfigurationUserLevel.None)

        Try
            currentSection = DirectCast( _
                config.GetSection(sectionName),  _
                ConsoleSection)

            ' Synchronize the application configuration
            ' if needed. The following two steps seem
            ' to solve some out of synch issues 
            ' between roaming and default
            ' configuration.
            config.Save(ConfigurationSaveMode.Modified)

            ' Force a reload of the changed section, 
            ' if needed. This makes the new values available 
            ' for reading.
            ConfigurationManager.RefreshSection(sectionName)

            If currentSection Is Nothing Then
                ' Create a custom configuration section.
                currentSection = New ConsoleSection()

                ' Define where in the configuration file 
                ' hierarchy the associated 
                ' configuration section can be declared.
                ' The following assignment assures that 
                ' the configuration information can be 
                ' defined in the user.config file in the 
                ' roaming user directory. 
                currentSection.SectionInformation. _
                AllowExeDefinition = _
                    ConfigurationAllowExeDefinition. _
                    MachineToLocalUser

                ' Allow the configuration section to be 
                ' overridden by lower-level configuration 
                ' files.
                ' This means that lower-level files can 
                ' contain()the section (use the same name) 
                ' and assign different values to it as 
                ' done by the function 
                ' GetApplicationConfiguration() in this
                ' example.
                currentSection.SectionInformation. _
                    AllowOverride = True

                ' Store console settings for roaming users.
                currentSection.ConsoleElement. _
                BackgroundColor = ConsoleColor.Blue
                currentSection.ConsoleElement. _
                ForegroundColor = ConsoleColor.Yellow

                ' Add configuration information to 
                ' the configuration file.
                config.Sections.Add(sectionName, _
                    currentSection)
                config.Save(ConfigurationSaveMode.Modified)
                ' Force a reload of the changed section. This 
                ' makes the new values available for reading.
                ConfigurationManager.RefreshSection( _
                    sectionName)
            End If
        Catch e As ConfigurationErrorsException
            Console.WriteLine("[Exception error: {0}]", _
                              e.ToString())
        End Try

        ' Set console properties using values
        ' stored in the configuration file.
        Console.BackgroundColor = _
            currentSection.ConsoleElement.BackgroundColor
        Console.ForegroundColor = _
            currentSection.ConsoleElement.ForegroundColor
        ' Apply the changes.
        Console.Clear()

        ' Display feedback.
        Console.WriteLine()
        Console.WriteLine( _
            "Using OpenExeConfiguration(userLevel).")
        Console.WriteLine( _
            "Configuration file is: {0}", config.FilePath)
    End Sub

注釈

クライアント アプリケーションでは、すべてのユーザーに適用されるグローバル構成、個々のユーザーに適用される個別の構成、ローミング ユーザーに適用される構成が使用されます。 パラメーターは userLevel 、ユーザー レベルがない (構成ファイルがアプリケーションと同じディレクトリにある) か、ユーザーごとのレベル (構成ファイルがユーザー レベルによって決定されるアプリケーション設定パス内にある) かを示すことによって、開く構成ファイルの場所を決定します。

に対して次のいずれかの値を渡して、取得する構成を指定します userLevel

  • すべてのユーザーに Configuration 適用される オブジェクトを取得するには、 を に設定 userLevel します None

  • 現在のユーザーに適用されるローカル Configuration オブジェクトを取得するには、 を にPerUserRoamingAndLocal設定userLevelします。

  • 現在のユーザーに適用されるローミング Configuration オブジェクトを取得するには、 を にPerUserRoaming設定userLevelします。

    注意

    リソースの オブジェクトを Configuration 取得するには、設定を継承するすべての構成ファイルに対する読み取りアクセス許可がコードに必要です。 構成ファイルを更新するには、構成ファイルとそれが存在するディレクトリの両方に対する書き込みアクセス許可をコードに追加する必要があります。

こちらもご覧ください

適用対象

OpenExeConfiguration(String)

ソース:
ConfigurationManager.cs
ソース:
ConfigurationManager.cs
ソース:
ConfigurationManager.cs

指定したクライアント構成ファイルを Configuration オブジェクトとして開きます。

public:
 static System::Configuration::Configuration ^ OpenExeConfiguration(System::String ^ exePath);
public static System.Configuration.Configuration OpenExeConfiguration (string exePath);
static member OpenExeConfiguration : string -> System.Configuration.Configuration
Public Shared Function OpenExeConfiguration (exePath As String) As Configuration

パラメーター

exePath
String

実行可能 (exe) ファイルのパスです。

戻り値

指定された構成ファイル。

例外

構成ファイルを読み込めませんでした。

OpenExeConfiguration メソッドを使用するコード例を次に示します。

    // Get the application configuration file.
    // This function uses the 
    // OpenExeConfiguration(string)method 
    // to get the application configuration file. 
    // It also creates a custom ConsoleSection and 
    // sets its ConsoleElement BackgroundColor and
    // ForegroundColor properties to black and white
    // respectively. Then it uses these properties to
    // set the console colors.  
    public static void GetAppConfiguration()
    {

      // Get the application path needed to obtain
      // the application configuration file.
#if DEBUG
      string applicationName =
          Environment.GetCommandLineArgs()[0];
#else
           string applicationName =
          Environment.GetCommandLineArgs()[0]+ ".exe";
#endif

      string exePath = System.IO.Path.Combine(
          Environment.CurrentDirectory, applicationName);

      // Get the configuration file. The file name has
      // this format appname.exe.config.
      System.Configuration.Configuration config =
        ConfigurationManager.OpenExeConfiguration(exePath);

      try
      {
        
        // Create a custom configuration section
        // having the same name that is used in the 
        // roaming configuration file.
        // This is because the configuration section 
        // can be overridden by lower-level 
        // configuration files. 
        // See the GetRoamingConfiguration() function in 
        // this example.
        string sectionName = "consoleSection";
        ConsoleSection customSection = new ConsoleSection();

        if (config.Sections[sectionName] == null)
        {
          // Create a custom section if it does 
          // not exist yet.
          
          // Store console settings.
          customSection.ConsoleElement.BackgroundColor =
              ConsoleColor.Black;
          customSection.ConsoleElement.ForegroundColor =
              ConsoleColor.White;

          // Add configuration information to the
          // configuration file.
          config.Sections.Add(sectionName, customSection);
          config.Save(ConfigurationSaveMode.Modified);
          // Force a reload of the changed section.
          // This makes the new values available for reading.
          ConfigurationManager.RefreshSection(sectionName);
        }
        // Set console properties using values
        // stored in the configuration file.
        customSection =
            (ConsoleSection)config.GetSection(sectionName);
        Console.BackgroundColor =
            customSection.ConsoleElement.BackgroundColor;
        Console.ForegroundColor =
            customSection.ConsoleElement.ForegroundColor;
        // Apply the changes.
        Console.Clear();
      }
      catch (ConfigurationErrorsException e)
      {
        Console.WriteLine("[Error exception: {0}]",
            e.ToString());
      }
     
      // Display feedback.
      Console.WriteLine();
      Console.WriteLine("Using OpenExeConfiguration(string).");
      // Display the current configuration file path.
      Console.WriteLine("Configuration file is: {0}", 
        config.FilePath);
    }
    ' Get the application configuration file.
    ' This function uses the 
    ' OpenExeConfiguration(string)method 
    ' to get the application configuration file. 
    ' It also creates a custom ConsoleSection and 
    ' sets its ConsoleElement BackgroundColor and
    ' ForegroundColor properties to black and white
    ' respectively. Then it uses these properties to
    ' set the console colors.  
    Public Shared Sub GetAppConfiguration()
        ' Get the application path needed to obtain
        ' the application configuration file.
#If DEBUG Then
        Dim applicationName As String = _
            Environment.GetCommandLineArgs()(0)
#Else
            Dim applicationName As String = _
                Environment.GetCommandLineArgs()(0) + ".exe"
#End If

        Dim exePath As String = _
        System.IO.Path.Combine( _
            Environment.CurrentDirectory, applicationName)

        ' Get the configuration file. The file name has
        ' this format appname.exe.config.
        Dim config As System.Configuration.Configuration = _
            ConfigurationManager.OpenExeConfiguration(exePath)

        Try

            ' Create a custom configuration section
            ' having the same name that is used in the 
            ' roaming configuration file.
            ' This is because the configuration section 
            ' can be overridden by lower-level 
            ' configuration files. 
            ' See the GetRoamingConfiguration() function in 
            ' this example.
            Dim sectionName As String = "consoleSection"
            Dim customSection As New ConsoleSection()

            If config.Sections(sectionName) Is Nothing Then
                ' Create a custom section if it does 
                ' not exist yet.

                ' Store console settings.
                customSection.ConsoleElement. _
                    BackgroundColor = ConsoleColor.Black
                customSection.ConsoleElement. _
                    ForegroundColor = ConsoleColor.White

                ' Add configuration information to the
                ' configuration file.
                config.Sections.Add(sectionName, _
                                    customSection)
                config.Save(ConfigurationSaveMode.Modified)
                ' Force a reload of the changed section.
                ' This makes the new values available 
                ' for reading.
                ConfigurationManager.RefreshSection( _
                    sectionName)
            End If
            ' Set console properties using values
            ' stored in the configuration file.
            customSection = DirectCast( _
                config.GetSection(sectionName),  _
                    ConsoleSection)
            Console.BackgroundColor = _
                customSection.ConsoleElement.BackgroundColor
            Console.ForegroundColor = _
                customSection.ConsoleElement.ForegroundColor
            ' Apply the changes.
            Console.Clear()
        Catch e As ConfigurationErrorsException
            Console.WriteLine("[Error exception: {0}]", _
                              e.ToString())
        End Try

        ' Display feedback.
        Console.WriteLine()
        Console.WriteLine( _
            "Using OpenExeConfiguration(string).")
        ' Display the current configuration file path.
        Console.WriteLine( _
            "Configuration file is: {0}", config.FilePath)
    End Sub

注釈

このメソッド オーバーロードの呼び出しは、 パラメーターを にfalse設定してOpenMappedExeConfiguration(ExeConfigurationFileMap, ConfigurationUserLevel, Boolean)オーバーロードをpreLoad呼び出すことと同じです。

こちらもご覧ください

適用対象