CounterSample 생성자

정의

네임스페이스:

System.Diagnostics

어셈블리:

System.Diagnostics.PerformanceCounter.dll

패키지:

System.Diagnostics.PerformanceCounter v8.0.0

CounterSample 구조체의 새 인스턴스를 초기화합니다.

오버로드

CounterSample(Int64, Int64, Int64, Int64, Int64, Int64, PerformanceCounterType)	CounterSample 구조체의 새 인스턴스를 초기화하고 CounterTimeStamp 속성을 0으로 설정합니다.
CounterSample(Int64, Int64, Int64, Int64, Int64, Int64, PerformanceCounterType, Int64)	CounterSample 구조체의 새 인스턴스를 초기화하고 CounterTimeStamp 속성을 전달된 값으로 설정합니다.

CounterSample(Int64, Int64, Int64, Int64, Int64, Int64, PerformanceCounterType)

Source:

CounterSample.cs

CounterSample 구조체의 새 인스턴스를 초기화하고 CounterTimeStamp 속성을 0으로 설정합니다.

public:
 CounterSample(long rawValue, long baseValue, long counterFrequency, long systemFrequency, long timeStamp, long timeStamp100nSec, System::Diagnostics::PerformanceCounterType counterType);

public CounterSample (long rawValue, long baseValue, long counterFrequency, long systemFrequency, long timeStamp, long timeStamp100nSec, System.Diagnostics.PerformanceCounterType counterType);

new System.Diagnostics.CounterSample : int64 * int64 * int64 * int64 * int64 * int64 * System.Diagnostics.PerformanceCounterType -> System.Diagnostics.CounterSample

Public Sub New (rawValue As Long, baseValue As Long, counterFrequency As Long, systemFrequency As Long, timeStamp As Long, timeStamp100nSec As Long, counterType As PerformanceCounterType)

매개 변수

rawValue

Int64

성능 카운터 샘플과 연결된 숫자 값입니다.

baseValue

Int64

샘플이 여러 개의 카운터에 기반하는 경우에 사용할 카운터의 선택적인 기본 원시 값입니다.

counterFrequency

Int64

카운터를 읽는 빈도입니다.

systemFrequency

Int64

시스템에서 카운터를 읽는 빈도입니다.

timeStamp

Int64

원시 타임스탬프입니다.

timeStamp100nSec

Int64

초정밀 원시 타임스탬프입니다.

counterType

PerformanceCounterType

이 샘플이 스냅샷으로 사용되는 카운터의 형식을 나타내는 PerformanceCounterType 개체입니다.

설명

이 생성자를 사용하여 성능 카운터의 초기 샘플을 만듭니다. 시스템 모니터는 메서드를 처음 호출할 때 이러한 매개 변수에 NextSample 대한 값을 자동으로 제공합니다.

CounterSample(Int64, Int64, Int64, Int64, Int64, Int64, PerformanceCounterType, Int64)

Source:

CounterSample.cs

CounterSample 구조체의 새 인스턴스를 초기화하고 CounterTimeStamp 속성을 전달된 값으로 설정합니다.

public:
 CounterSample(long rawValue, long baseValue, long counterFrequency, long systemFrequency, long timeStamp, long timeStamp100nSec, System::Diagnostics::PerformanceCounterType counterType, long counterTimeStamp);

public CounterSample (long rawValue, long baseValue, long counterFrequency, long systemFrequency, long timeStamp, long timeStamp100nSec, System.Diagnostics.PerformanceCounterType counterType, long counterTimeStamp);

new System.Diagnostics.CounterSample : int64 * int64 * int64 * int64 * int64 * int64 * System.Diagnostics.PerformanceCounterType * int64 -> System.Diagnostics.CounterSample

Public Sub New (rawValue As Long, baseValue As Long, counterFrequency As Long, systemFrequency As Long, timeStamp As Long, timeStamp100nSec As Long, counterType As PerformanceCounterType, counterTimeStamp As Long)

매개 변수

rawValue

Int64

성능 카운터 샘플과 연결된 숫자 값입니다.

baseValue

Int64

샘플이 여러 개의 카운터에 기반하는 경우에 사용할 카운터의 선택적인 기본 원시 값입니다.

counterFrequency

Int64

카운터를 읽는 빈도입니다.

systemFrequency

Int64

시스템에서 카운터를 읽는 빈도입니다.

timeStamp

Int64

원시 타임스탬프입니다.

timeStamp100nSec

Int64

초정밀 원시 타임스탬프입니다.

counterType

PerformanceCounterType

이 샘플이 스냅샷으로 사용되는 카운터의 형식을 나타내는 PerformanceCounterType 개체입니다.

counterTimeStamp

Int64

샘플을 가져온 시간입니다.

예제

다음 예제에서는 , counterFrequencybaseValuecounterTypetimeStampsystemFrequencytimeStamp100nSec및 매개 변수에 대한 rawValue값을 전달하여 새 CounterSample 구조를 초기화하는 방법을 보여 줍니다.counterTimeStamp 구조를 만든 CounterSample 후 예제에서는 콘솔 창에서 의 CounterSample 속성 값을 표시합니다.

PerformanceCounter^ myPerformanceCounter1 = gcnew PerformanceCounter(
   "Processor","% Processor Time","0" );
CounterSample myCounterSample1( 10L, 20L, 30L, 40L, 50L, 60L,
  PerformanceCounterType::AverageCount64 );
Console::WriteLine( "CounterTimeStamp = {0}", myCounterSample1.CounterTimeStamp );

Console::WriteLine( "BaseValue = {0}", myCounterSample1.BaseValue );
Console::WriteLine( "RawValue = {0}", myCounterSample1.RawValue );
Console::WriteLine( "CounterFrequency = {0}", myCounterSample1.CounterFrequency );
Console::WriteLine( "SystemFrequency = {0}", myCounterSample1.SystemFrequency );
Console::WriteLine( "TimeStamp = {0}", myCounterSample1.TimeStamp );
Console::WriteLine( "TimeStamp100nSec = {0}", myCounterSample1.TimeStamp100nSec );
Console::WriteLine( "CounterType = {0}", myCounterSample1.CounterType );
// Hold the results of sample.
myCounterSample1 = myPerformanceCounter1->NextSample();
Console::WriteLine( "BaseValue = {0}", myCounterSample1.BaseValue );
Console::WriteLine( "RawValue = {0}", myCounterSample1.RawValue );
Console::WriteLine( "CounterFrequency = {0}", myCounterSample1.CounterFrequency );
Console::WriteLine( "SystemFrequency = {0}", myCounterSample1.SystemFrequency );
Console::WriteLine( "TimeStamp = {0}", myCounterSample1.TimeStamp );
Console::WriteLine( "TimeStamp100nSec = {0}", myCounterSample1.TimeStamp100nSec );
Console::WriteLine( "CounterType = {0}", myCounterSample1.CounterType );

PerformanceCounter myPerformanceCounter1 = new PerformanceCounter
   ("Processor","% Processor Time", "0");
CounterSample myCounterSample1 = new CounterSample(10L, 20L, 30L, 40L, 50L, 60L,
                     PerformanceCounterType.AverageCount64);
Console.WriteLine("CounterTimeStamp = "+myCounterSample1.CounterTimeStamp);

Console.WriteLine("BaseValue = "+myCounterSample1.BaseValue);
Console.WriteLine("RawValue = "+myCounterSample1.RawValue);
Console.WriteLine("CounterFrequency = "+myCounterSample1.CounterFrequency);
Console.WriteLine("SystemFrequency = "+myCounterSample1.SystemFrequency);
Console.WriteLine("TimeStamp = "+myCounterSample1.TimeStamp);
Console.WriteLine("TimeStamp100nSec = "+myCounterSample1.TimeStamp100nSec);
Console.WriteLine("CounterType = "+myCounterSample1.CounterType);
// Hold the results of sample.
myCounterSample1 = myPerformanceCounter1.NextSample();
Console.WriteLine("BaseValue = "+myCounterSample1.BaseValue);
Console.WriteLine("RawValue = "+myCounterSample1.RawValue);
Console.WriteLine("CounterFrequency = "+myCounterSample1.CounterFrequency);
Console.WriteLine("SystemFrequency = "+myCounterSample1.SystemFrequency);
Console.WriteLine("TimeStamp = "+myCounterSample1.TimeStamp);
Console.WriteLine("TimeStamp100nSec = "+myCounterSample1.TimeStamp100nSec);
Console.WriteLine("CounterType = "+myCounterSample1.CounterType);

Dim myPerformanceCounter1 As New PerformanceCounter("Processor", _
                                            "% Processor Time", "0")
Dim myCounterSample1 As New CounterSample(10&, 20&, 30&, 40&, 50&, 60&, _
                               PerformanceCounterType.AverageCount64)
Console.WriteLine("CounterTimeStamp = " & myCounterSample1.CounterTimeStamp)

Console.WriteLine("BaseValue = " & myCounterSample1.BaseValue)
Console.WriteLine("RawValue = " & myCounterSample1.RawValue)
Console.WriteLine("CounterFrequency = " & myCounterSample1.CounterFrequency)
Console.WriteLine("SystemFrequency = " & myCounterSample1.SystemFrequency)
Console.WriteLine("TimeStamp = " & myCounterSample1.TimeStamp)
Console.WriteLine("TimeStamp100nSec = " & myCounterSample1.TimeStamp100nSec)
Console.WriteLine("CounterType = " & myCounterSample1.CounterType.ToString)
' Hold the results of sample.
myCounterSample1 = myPerformanceCounter1.NextSample()

Console.WriteLine("BaseValue = " & myCounterSample1.BaseValue)
Console.WriteLine("RawValue = " & myCounterSample1.RawValue)
Console.WriteLine("CounterFrequency = " & myCounterSample1.CounterFrequency)
Console.WriteLine("SystemFrequency = " & myCounterSample1.SystemFrequency)
Console.WriteLine("TimeStamp = " & myCounterSample1.TimeStamp)
Console.WriteLine("TimeStamp100nSec = " & myCounterSample1.TimeStamp100nSec)
Console.WriteLine("CounterType = " & myCounterSample1.CounterType.ToString)

PerformanceCounter^ myPerformanceCounter2 =
   gcnew PerformanceCounter( "Processor","% Processor Time","0" );
CounterSample myCounterSample2( 10L, 20L, 30L, 40L, 50L, 60L,
  PerformanceCounterType::AverageCount64,300);
Console::WriteLine( "CounterTimeStamp = {0}", myCounterSample2.CounterTimeStamp );
Console::WriteLine( "BaseValue = {0}", myCounterSample2.BaseValue );
Console::WriteLine( "RawValue = {0}", myCounterSample2.RawValue );
Console::WriteLine( "CounterFrequency = {0}", myCounterSample2.CounterFrequency );
Console::WriteLine( "SystemFrequency = {0}", myCounterSample2.SystemFrequency );
Console::WriteLine( "TimeStamp = {0}", myCounterSample2.TimeStamp );
Console::WriteLine( "TimeStamp100nSec = {0}", myCounterSample2.TimeStamp100nSec );
Console::WriteLine( "CounterType = {0}", myCounterSample2.CounterType );
Console::WriteLine( "CounterTimeStamp = {0}", myCounterSample2.CounterTimeStamp );
// Hold the results of sample.
myCounterSample2 = myPerformanceCounter2->NextSample();
Console::WriteLine( "BaseValue = {0}", myCounterSample2.BaseValue );
Console::WriteLine( "RawValue = {0}", myCounterSample2.RawValue );
Console::WriteLine( "CounterFrequency = {0}", myCounterSample2.CounterFrequency );
Console::WriteLine( "SystemFrequency = {0}", myCounterSample2.SystemFrequency );
Console::WriteLine( "TimeStamp = {0}", myCounterSample2.TimeStamp );
Console::WriteLine( "TimeStamp100nSec = {0}", myCounterSample2.TimeStamp100nSec );
Console::WriteLine( "CounterType = {0}", myCounterSample2.CounterType );
Console::WriteLine( "CounterTimeStamp = {0}", myCounterSample2.CounterTimeStamp );

PerformanceCounter myPerformanceCounter2 = new PerformanceCounter
   ("Processor","% Processor Time", "0");
CounterSample myCounterSample2 = new CounterSample(10L, 20L, 30L, 40L, 50L, 60L,
               PerformanceCounterType.AverageCount64, 300);
Console.WriteLine("CounterTimeStamp = "+myCounterSample2.CounterTimeStamp);
Console.WriteLine("BaseValue = "+myCounterSample2.BaseValue);
Console.WriteLine("RawValue = "+myCounterSample2.RawValue);
Console.WriteLine("CounterFrequency = "+myCounterSample2.CounterFrequency);
Console.WriteLine("SystemFrequency = "+myCounterSample2.SystemFrequency);
Console.WriteLine("TimeStamp = "+myCounterSample2.TimeStamp);
Console.WriteLine("TimeStamp100nSec = "+myCounterSample2.TimeStamp100nSec);
Console.WriteLine("CounterType = "+myCounterSample2.CounterType);
Console.WriteLine("CounterTimeStamp = "+myCounterSample2.CounterTimeStamp);
// Hold the results of sample.
myCounterSample2 = myPerformanceCounter2.NextSample();
Console.WriteLine("BaseValue = "+myCounterSample2.BaseValue);
Console.WriteLine("RawValue = "+myCounterSample2.RawValue);
Console.WriteLine("CounterFrequency = "+myCounterSample2.CounterFrequency);
Console.WriteLine("SystemFrequency = "+myCounterSample2.SystemFrequency);
Console.WriteLine("TimeStamp = "+myCounterSample2.TimeStamp);
Console.WriteLine("TimeStamp100nSec = "+myCounterSample2.TimeStamp100nSec);
Console.WriteLine("CounterType = "+myCounterSample2.CounterType);
Console.WriteLine("CounterTimeStamp = "+myCounterSample2.CounterTimeStamp);

Dim myPerformanceCounter2 As New PerformanceCounter("Processor", _
                                             "% Processor Time", "0")
Dim myCounterSample2 As New CounterSample(10&, 20&, 30&, 40&, 50&, 60&, _
                         PerformanceCounterType.AverageCount64, 300)
Console.WriteLine("CounterTimeStamp = " & myCounterSample2.CounterTimeStamp)
Console.WriteLine("BaseValue = " & myCounterSample2.BaseValue)
Console.WriteLine("RawValue = " & myCounterSample2.RawValue)
Console.WriteLine("CounterFrequency = " & myCounterSample2.CounterFrequency)
Console.WriteLine("SystemFrequency = " & myCounterSample2.SystemFrequency)
Console.WriteLine("TimeStamp = " & myCounterSample2.TimeStamp)
Console.WriteLine("TimeStamp100nSec = " & myCounterSample2.TimeStamp100nSec)
Console.WriteLine("CounterType = " & myCounterSample2.CounterType.ToString)
Console.WriteLine("CounterTimeStamp = " & myCounterSample2.CounterTimeStamp)

' Hold the results of sample.
myCounterSample2 = myPerformanceCounter2.NextSample()
Console.WriteLine("BaseValue = " & myCounterSample2.BaseValue)
Console.WriteLine("RawValue = " & myCounterSample2.RawValue)
Console.WriteLine("CounterFrequency = " & myCounterSample2.CounterFrequency)
Console.WriteLine("SystemFrequency = " & myCounterSample2.SystemFrequency)
Console.WriteLine("TimeStamp = " & myCounterSample2.TimeStamp)
Console.WriteLine("TimeStamp100nSec = " & myCounterSample2.TimeStamp100nSec)
Console.WriteLine("CounterType = " & myCounterSample2.CounterType.ToString)
Console.WriteLine("CounterTimeStamp = " & myCounterSample2.CounterTimeStamp)

설명

성능 카운터의 초기 샘플을 이미 가져온 후 이 생성자를 사용하여 샘플을 가져옵니다. 시스템 모니터는 메서드를 호출할 때 이러한 매개 변수에 NextSample 대한 값을 자동으로 제공합니다.