Graphics.TranslateClip Graphics.TranslateClip Graphics.TranslateClip Graphics.TranslateClip Method

정의

가로와 세로 방향으로 지정된 크기만큼 이 Graphics의 클립 영역을 변환합니다.Translates the clipping region of this Graphics by specified amounts in the horizontal and vertical directions.

오버로드

TranslateClip(Int32, Int32) TranslateClip(Int32, Int32) TranslateClip(Int32, Int32) TranslateClip(Int32, Int32)

가로와 세로 방향으로 지정된 크기만큼 이 Graphics의 클립 영역을 변환합니다.Translates the clipping region of this Graphics by specified amounts in the horizontal and vertical directions.

TranslateClip(Single, Single) TranslateClip(Single, Single) TranslateClip(Single, Single) TranslateClip(Single, Single)

가로와 세로 방향으로 지정된 크기만큼 이 Graphics의 클립 영역을 변환합니다.Translates the clipping region of this Graphics by specified amounts in the horizontal and vertical directions.

TranslateClip(Int32, Int32) TranslateClip(Int32, Int32) TranslateClip(Int32, Int32) TranslateClip(Int32, Int32)

가로와 세로 방향으로 지정된 크기만큼 이 Graphics의 클립 영역을 변환합니다.Translates the clipping region of this Graphics by specified amounts in the horizontal and vertical directions.

public:
 void TranslateClip(int dx, int dy);
public void TranslateClip (int dx, int dy);
member this.TranslateClip : int * int -> unit
Public Sub TranslateClip (dx As Integer, dy As Integer)

매개 변수

dx
Int32 Int32 Int32 Int32

변환의 X좌표입니다.The x-coordinate of the translation.

dy
Int32 Int32 Int32 Int32

변환의 Y좌표입니다.The y-coordinate of the translation.

예제

다음 코드 예제는 Windows Forms에서 사용 하도록 설계 되었으며 필요 PaintEventArgs e의 매개 변수는 Paint 이벤트 처리기입니다.The following code example is designed for use with Windows Forms, and it requires PaintEventArgse, which is a parameter of the Paint event handler. 이 코드에서는 다음 작업을 수행합니다.The code performs the following actions:

  • 클리핑 영역에 대 한 사각형을 만듭니다.Creates a rectangle for the clipping region.

  • 사각형에 클립 영역을 설정 합니다.Sets the clipping region to the rectangle.

  • 클리핑 영역을 벡터 (50, 50)로 변환 합니다.Translates the clipping region by a vector (50, 50).

  • 검은색 단색 브러시를 사용 하 여 큰 사각형을 채웁니다.Fills a large rectangle with a solid black brush.

결과 변환, 작은 검은색 사각형입니다.The result is a translated, small, black rectangle.

public:
   void TranslateClipInt( PaintEventArgs^ e )
   {
      // Create rectangle for clipping region.
      Rectangle clipRect = Rectangle(0,0,100,100);

      // Set clipping region of graphics to rectangle.
      e->Graphics->SetClip( clipRect );

      // Translate clipping region.
      int dx = 50;
      int dy = 50;
      e->Graphics->TranslateClip( dx, dy );

      // Fill rectangle to demonstrate translated clip region.
      e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
   }
private void TranslateClipInt(PaintEventArgs e)
{

    // Create rectangle for clipping region.
    Rectangle clipRect = new Rectangle(0, 0, 100, 100);

    // Set clipping region of graphics to rectangle.
    e.Graphics.SetClip(clipRect);

    // Translate clipping region.
    int dx = 50;
    int dy = 50;
    e.Graphics.TranslateClip(dx, dy);

    // Fill rectangle to demonstrate translated clip region.
    e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
}
Private Sub TranslateClipInt(ByVal e As PaintEventArgs)

    ' Create rectangle for clipping region.
    Dim clipRect As New Rectangle(0, 0, 100, 100)

    ' Set clipping region of graphics to rectangle.
    e.Graphics.SetClip(clipRect)

    ' Translate clipping region.
    Dim dx As Integer = 50
    Dim dy As Integer = 50
    e.Graphics.TranslateClip(dx, dy)

    ' Fill rectangle to demonstrate translated clip region.
    e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
    500, 300)
End Sub

TranslateClip(Single, Single) TranslateClip(Single, Single) TranslateClip(Single, Single) TranslateClip(Single, Single)

가로와 세로 방향으로 지정된 크기만큼 이 Graphics의 클립 영역을 변환합니다.Translates the clipping region of this Graphics by specified amounts in the horizontal and vertical directions.

public:
 void TranslateClip(float dx, float dy);
public void TranslateClip (float dx, float dy);
member this.TranslateClip : single * single -> unit
Public Sub TranslateClip (dx As Single, dy As Single)

매개 변수

dx
Single Single Single Single

변환의 X좌표입니다.The x-coordinate of the translation.

dy
Single Single Single Single

변환의 Y좌표입니다.The y-coordinate of the translation.

예제

다음 코드 예제는 Windows Forms에서 사용 하도록 설계 되었으며 필요 PaintEventArgs e의 매개 변수는 Paint 이벤트 처리기입니다.The following code example is designed for use with Windows Forms, and it requires PaintEventArgse, which is a parameter of the Paint event handler. 이 코드에서는 다음 작업을 수행합니다.The code performs the following actions:

  • 클리핑 영역에 대 한 사각형을 만듭니다.Creates a rectangle for the clipping region.

  • 사각형에 클립 영역을 설정 합니다.Sets the clipping region to the rectangle.

  • 클리핑 영역을 벡터 (50.0 f, 50.0 f)로 변환합니다.Translates the clipping region by a vector (50.0F, 50.0F).

  • 검은색 단색 브러시를 사용 하 여 큰 사각형을 채웁니다.Fills a large rectangle with a solid black brush.

결과 변환, 작은 검은색 사각형입니다.The result is a translated, small, black rectangle.

public:
   void TranslateClipFloat( PaintEventArgs^ e )
   {
      // Create rectangle for clipping region.
      RectangleF clipRect = RectangleF(0.0F,0.0F,100.0F,100.0F);

      // Set clipping region of graphics to rectangle.
      e->Graphics->SetClip( clipRect );

      // Translate clipping region.
      float dx = 50.0F;
      float dy = 50.0F;
      e->Graphics->TranslateClip( dx, dy );

      // Fill rectangle to demonstrate translated clip region.
      e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
   }
private void TranslateClipFloat(PaintEventArgs e)
{

    // Create rectangle for clipping region.
    RectangleF clipRect = new RectangleF(0.0F, 0.0F, 100.0F, 100.0F);

    // Set clipping region of graphics to rectangle.
    e.Graphics.SetClip(clipRect);

    // Translate clipping region.
    float dx = 50.0F;
    float dy = 50.0F;
    e.Graphics.TranslateClip(dx, dy);

    // Fill rectangle to demonstrate translated clip region.
    e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
}
Private Sub TranslateClipFloat(ByVal e As PaintEventArgs)

    ' Create rectangle for clipping region.
    Dim clipRect As New RectangleF(0.0F, 0.0F, 100.0F, 100.0F)

    ' Set clipping region of graphics to rectangle.
    e.Graphics.SetClip(clipRect)

    ' Translate clipping region.
    Dim dx As Single = 50.0F
    Dim dy As Single = 50.0F
    e.Graphics.TranslateClip(dx, dy)

    ' Fill rectangle to demonstrate translated clip region.
    e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
    500, 300)
End Sub

적용 대상