X509Store 생성자

참조

정의

네임스페이스:: System.Security.Cryptography.X509Certificates

어셈블리:: System.Security.Cryptography.X509Certificates.dll

어셈블리:: System.Security.Cryptography.dll

어셈블리:: System.dll

어셈블리:: netstandard.dll

중요

일부 정보는 릴리스되기 전에 상당 부분 수정될 수 있는 시험판 제품과 관련이 있습니다. Microsoft는 여기에 제공된 정보에 대해 어떠한 명시적이거나 묵시적인 보증도 하지 않습니다.

X509Store 클래스의 새 인스턴스를 초기화합니다.

오버로드

X509Store()	현재 사용자의 개인 인증서 저장소를 사용하여 X509Store 클래스의 새 인스턴스를 초기화합니다.
X509Store(IntPtr)	X509Store 저장소에 대한 Intptr 핸들을 사용하여 `HCERTSTORE` 클래스의 새 인스턴스를 초기화합니다.
X509Store(StoreLocation)	지정된 저장소 위치 값에서 개인 인증서 저장소를 사용하여 X509Store 클래스의 새 인스턴스를 초기화합니다.
X509Store(StoreName)	현재 사용자의 인증서 저장소에서 지정된 저장소 이름을 사용하여 X509Store 클래스의 새 인스턴스를 초기화합니다.
X509Store(String)	지정된 저장소 이름을 사용하여 X509Store 클래스의 새 인스턴스를 초기화합니다.
X509Store(StoreName, StoreLocation)	지정된 X509Store 및 StoreName 값을 사용하여 StoreLocation 클래스의 새 인스턴스를 초기화합니다.
X509Store(String, StoreLocation)	지정된 저장소 이름 및 저장소 위치를 사용하여 X509Store 클래스의 새 인스턴스를 초기화합니다.
X509Store(StoreName, StoreLocation, OpenFlags)	지정된 저장소 이름 및 저장소 위치 값을 사용하여 X509Store 클래스의 새 인스턴스를 초기화한 다음, 지정된 플래그를 사용하여 엽니다.
X509Store(String, StoreLocation, OpenFlags)	지정된 저장소 이름 및 저장소 위치 값을 사용하여 X509Store 클래스의 새 인스턴스를 초기화한 다음, 지정된 플래그를 사용하여 엽니다.

X509Store()

현재 사용자의 개인 인증서 저장소를 사용하여 X509Store 클래스의 새 인스턴스를 초기화합니다.

public:
 X509Store();

public X509Store ();

Public Sub New ()

예제

다음 코드 예제에서는 X.509 인증서 저장소를 열고 인증서를 추가 및 삭제한 다음 저장소를 닫습니다. 로컬 저장소에 추가하고 제거할 세 개의 인증서가 있다고 가정합니다.

#using <System.dll>
#using <System.Security.dll>

using namespace System;
using namespace System::Security::Cryptography;
using namespace System::Security::Cryptography::X509Certificates;
using namespace System::IO;
int main()
{
   
   //Create new X509 store called teststore from the local certificate store.
   X509Store ^ store = gcnew X509Store( "teststore",StoreLocation::CurrentUser );
   store->Open( OpenFlags::ReadWrite );
   X509Certificate2 ^ certificate = gcnew X509Certificate2;
   
   //Create certificates from certificate files.
   //You must put in a valid path to three certificates in the following constructors.
   X509Certificate2 ^ certificate1 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate2 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate5 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   
   //Create a collection and add two of the certificates.
   X509Certificate2Collection ^ collection = gcnew X509Certificate2Collection;
   collection->Add( certificate2 );
   collection->Add( certificate5 );
   
   //Add certificates to the store.
   store->Add( certificate1 );
   store->AddRange( collection );
   X509Certificate2Collection ^ storecollection = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "Store name: {0}", store->Name );
   Console::WriteLine( "Store location: {0}", store->Location );
   System::Collections::IEnumerator^ myEnum = storecollection->GetEnumerator();
   while ( myEnum->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a certificate.
   store->Remove( certificate1 );
   X509Certificate2Collection ^ storecollection2 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   System::Collections::IEnumerator^ myEnum1 = storecollection2->GetEnumerator();
   while ( myEnum1->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum1->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a range of certificates.
   store->RemoveRange( collection );
   X509Certificate2Collection ^ storecollection3 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   if ( storecollection3->Count == 0 )
   {
      Console::WriteLine( "Store contains no certificates." );
   }
   else
   {
      System::Collections::IEnumerator^ myEnum2 = storecollection3->GetEnumerator();
      while ( myEnum2->MoveNext() )
      {
         X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum2->Current);
         Console::WriteLine( "certificate name: {0}", x509->Subject );
      }
   }

   
   //Close the store.
   store->Close();
}

using System;
using System.Security.Cryptography;
using System.Security.Cryptography.X509Certificates;
using System.IO;

public class X509store2
{
    public static void Main (string[] args)
    {
        //Create new X509 store called teststore from the local certificate store.
        X509Store store = new X509Store ("teststore", StoreLocation.CurrentUser);
        store.Open (OpenFlags.ReadWrite);
        X509Certificate2 certificate = new X509Certificate2 ();

        //Create certificates from certificate files.
        //You must put in a valid path to three certificates in the following constructors.
        X509Certificate2 certificate1 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate2 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate5 = new X509Certificate2 ("c:\\mycerts\\*****.cer");

        //Create a collection and add two of the certificates.
        X509Certificate2Collection collection = new X509Certificate2Collection ();
        collection.Add (certificate2);
        collection.Add (certificate5);

        //Add certificates to the store.
        store.Add (certificate1);
        store.AddRange (collection);

        X509Certificate2Collection storecollection = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("Store name: {0}", store.Name);
        Console.WriteLine ("Store location: {0}", store.Location);
        foreach (X509Certificate2 x509 in storecollection)
        {
            Console.WriteLine("certificate name: {0}",x509.Subject);
        }

        //Remove a certificate.
        store.Remove (certificate1);
        X509Certificate2Collection storecollection2 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        foreach (X509Certificate2 x509 in storecollection2)
        {
            Console.WriteLine ("certificate name: {0}", x509.Subject);
        }

        //Remove a range of certificates.
        store.RemoveRange (collection);
        X509Certificate2Collection storecollection3 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        if (storecollection3.Count == 0)
        {
            Console.WriteLine ("Store contains no certificates.");
        }
        else
        {
            foreach (X509Certificate2 x509 in storecollection3)
            {
                Console.WriteLine ("certificate name: {0}", x509.Subject);
            }
        }

        //Close the store.
        store.Close ();
    }	
}

Imports System.Security.Cryptography
Imports System.Security.Cryptography.X509Certificates
Imports System.IO



Class X509store2

    Shared Sub Main(ByVal args() As String)
        'Create new X509 store called teststore from the local certificate store.
        Dim store As New X509Store("teststore", StoreLocation.CurrentUser)
        store.Open(OpenFlags.ReadWrite)
        Dim certificate As New X509Certificate2()

        'Create certificates from certificate files.
        'You must put in a valid path to three certificates in the following constructors.
        Dim certificate1 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate2 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate5 As New X509Certificate2("c:\mycerts\*****.cer")

        'Create a collection and add two of the certificates.
        Dim collection As New X509Certificate2Collection()
        collection.Add(certificate2)
        collection.Add(certificate5)

        'Add certificates to the store.
        store.Add(certificate1)
        store.AddRange(collection)

        Dim storecollection As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("Store name: {0}", store.Name)
        Console.WriteLine("Store location: {0}", store.Location)
        Dim x509 As X509Certificate2
        For Each x509 In storecollection
            Console.WriteLine("certificate name: {0}", x509.Subject)
        Next x509

        'Remove a certificate.
        store.Remove(certificate1)
        Dim storecollection2 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        Dim x509a As X509Certificate2
        For Each x509a In storecollection2
            Console.WriteLine("certificate name: {0}", x509a.Subject)
        Next x509a

        'Remove a range of certificates.
        store.RemoveRange(collection)
        Dim storecollection3 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        If storecollection3.Count = 0 Then
            Console.WriteLine("Store contains no certificates.")
        Else
            Dim x509b As X509Certificate2
            For Each x509b In storecollection3
                Console.WriteLine("certificate name: {0}", x509b.Subject)
            Next x509b
        End If

        'Close the store.
        store.Close()

    End Sub
End Class

설명

현재 사용자에 대한 개인 X.509 인증서 저장소를 사용하여 개체를 만들 X509Store 려면 이 생성자를 사용합니다.

적용 대상

X509Store(IntPtr)

X509Store 저장소에 대한 Intptr 핸들을 사용하여 HCERTSTORE 클래스의 새 인스턴스를 초기화합니다.

public:
 X509Store(IntPtr storeHandle);

public X509Store (IntPtr storeHandle);

new System.Security.Cryptography.X509Certificates.X509Store : nativeint -> System.Security.Cryptography.X509Certificates.X509Store

Public Sub New (storeHandle As IntPtr)

매개 변수

storeHandle: IntPtr
nativeint

HCERTSTORE 저장소에 대한 핸들입니다.

예외

ArgumentNullException

storeHandle 매개 변수가 null인 경우

CryptographicException

storeHandle 매개 변수가 잘못된 컨텍스트를 가리키는 경우

설명

이 생성자를 사용하여 관리되지 않는 CapI(Microsoft Cryptographic API)와의 호환성을 제공합니다.

적용 대상

X509Store(StoreLocation)

지정된 저장소 위치 값에서 개인 인증서 저장소를 사용하여 X509Store 클래스의 새 인스턴스를 초기화합니다.

public:
 X509Store(System::Security::Cryptography::X509Certificates::StoreLocation storeLocation);

public X509Store (System.Security.Cryptography.X509Certificates.StoreLocation storeLocation);

new System.Security.Cryptography.X509Certificates.X509Store : System.Security.Cryptography.X509Certificates.StoreLocation -> System.Security.Cryptography.X509Certificates.X509Store

Public Sub New (storeLocation As StoreLocation)

매개 변수

storeLocation: StoreLocation

X.509 인증서 저장소의 위치를 지정하는 열거형 값 중 하나입니다.

예제

#using <System.dll>
#using <System.Security.dll>

using namespace System;
using namespace System::Security::Cryptography;
using namespace System::Security::Cryptography::X509Certificates;
using namespace System::IO;
int main()
{
   
   //Create new X509 store called teststore from the local certificate store.
   X509Store ^ store = gcnew X509Store( "teststore",StoreLocation::CurrentUser );
   store->Open( OpenFlags::ReadWrite );
   X509Certificate2 ^ certificate = gcnew X509Certificate2;
   
   //Create certificates from certificate files.
   //You must put in a valid path to three certificates in the following constructors.
   X509Certificate2 ^ certificate1 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate2 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate5 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   
   //Create a collection and add two of the certificates.
   X509Certificate2Collection ^ collection = gcnew X509Certificate2Collection;
   collection->Add( certificate2 );
   collection->Add( certificate5 );
   
   //Add certificates to the store.
   store->Add( certificate1 );
   store->AddRange( collection );
   X509Certificate2Collection ^ storecollection = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "Store name: {0}", store->Name );
   Console::WriteLine( "Store location: {0}", store->Location );
   System::Collections::IEnumerator^ myEnum = storecollection->GetEnumerator();
   while ( myEnum->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a certificate.
   store->Remove( certificate1 );
   X509Certificate2Collection ^ storecollection2 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   System::Collections::IEnumerator^ myEnum1 = storecollection2->GetEnumerator();
   while ( myEnum1->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum1->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a range of certificates.
   store->RemoveRange( collection );
   X509Certificate2Collection ^ storecollection3 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   if ( storecollection3->Count == 0 )
   {
      Console::WriteLine( "Store contains no certificates." );
   }
   else
   {
      System::Collections::IEnumerator^ myEnum2 = storecollection3->GetEnumerator();
      while ( myEnum2->MoveNext() )
      {
         X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum2->Current);
         Console::WriteLine( "certificate name: {0}", x509->Subject );
      }
   }

   
   //Close the store.
   store->Close();
}

using System;
using System.Security.Cryptography;
using System.Security.Cryptography.X509Certificates;
using System.IO;

public class X509store2
{
    public static void Main (string[] args)
    {
        //Create new X509 store called teststore from the local certificate store.
        X509Store store = new X509Store ("teststore", StoreLocation.CurrentUser);
        store.Open (OpenFlags.ReadWrite);
        X509Certificate2 certificate = new X509Certificate2 ();

        //Create certificates from certificate files.
        //You must put in a valid path to three certificates in the following constructors.
        X509Certificate2 certificate1 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate2 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate5 = new X509Certificate2 ("c:\\mycerts\\*****.cer");

        //Create a collection and add two of the certificates.
        X509Certificate2Collection collection = new X509Certificate2Collection ();
        collection.Add (certificate2);
        collection.Add (certificate5);

        //Add certificates to the store.
        store.Add (certificate1);
        store.AddRange (collection);

        X509Certificate2Collection storecollection = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("Store name: {0}", store.Name);
        Console.WriteLine ("Store location: {0}", store.Location);
        foreach (X509Certificate2 x509 in storecollection)
        {
            Console.WriteLine("certificate name: {0}",x509.Subject);
        }

        //Remove a certificate.
        store.Remove (certificate1);
        X509Certificate2Collection storecollection2 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        foreach (X509Certificate2 x509 in storecollection2)
        {
            Console.WriteLine ("certificate name: {0}", x509.Subject);
        }

        //Remove a range of certificates.
        store.RemoveRange (collection);
        X509Certificate2Collection storecollection3 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        if (storecollection3.Count == 0)
        {
            Console.WriteLine ("Store contains no certificates.");
        }
        else
        {
            foreach (X509Certificate2 x509 in storecollection3)
            {
                Console.WriteLine ("certificate name: {0}", x509.Subject);
            }
        }

        //Close the store.
        store.Close ();
    }	
}

Imports System.Security.Cryptography
Imports System.Security.Cryptography.X509Certificates
Imports System.IO



Class X509store2

    Shared Sub Main(ByVal args() As String)
        'Create new X509 store called teststore from the local certificate store.
        Dim store As New X509Store("teststore", StoreLocation.CurrentUser)
        store.Open(OpenFlags.ReadWrite)
        Dim certificate As New X509Certificate2()

        'Create certificates from certificate files.
        'You must put in a valid path to three certificates in the following constructors.
        Dim certificate1 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate2 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate5 As New X509Certificate2("c:\mycerts\*****.cer")

        'Create a collection and add two of the certificates.
        Dim collection As New X509Certificate2Collection()
        collection.Add(certificate2)
        collection.Add(certificate5)

        'Add certificates to the store.
        store.Add(certificate1)
        store.AddRange(collection)

        Dim storecollection As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("Store name: {0}", store.Name)
        Console.WriteLine("Store location: {0}", store.Location)
        Dim x509 As X509Certificate2
        For Each x509 In storecollection
            Console.WriteLine("certificate name: {0}", x509.Subject)
        Next x509

        'Remove a certificate.
        store.Remove(certificate1)
        Dim storecollection2 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        Dim x509a As X509Certificate2
        For Each x509a In storecollection2
            Console.WriteLine("certificate name: {0}", x509a.Subject)
        Next x509a

        'Remove a range of certificates.
        store.RemoveRange(collection)
        Dim storecollection3 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        If storecollection3.Count = 0 Then
            Console.WriteLine("Store contains no certificates.")
        Else
            Dim x509b As X509Certificate2
            For Each x509b In storecollection3
                Console.WriteLine("certificate name: {0}", x509b.Subject)
            Next x509b
        End If

        'Close the store.
        store.Close()

    End Sub
End Class

설명

현재 사용자 또는 로컬 컴퓨터의 위치인 저장소 위치를 지정하여 개체를 만들 X509Store 려면 이 생성자를 사용합니다.

적용 대상

X509Store(StoreName)

현재 사용자의 인증서 저장소에서 지정된 저장소 이름을 사용하여 X509Store 클래스의 새 인스턴스를 초기화합니다.

public:
 X509Store(System::Security::Cryptography::X509Certificates::StoreName storeName);

public X509Store (System.Security.Cryptography.X509Certificates.StoreName storeName);

new System.Security.Cryptography.X509Certificates.X509Store : System.Security.Cryptography.X509Certificates.StoreName -> System.Security.Cryptography.X509Certificates.X509Store

Public Sub New (storeName As StoreName)

매개 변수

storeName: StoreName

X.509 인증서 저장소의 이름을 지정하는 열거형 값 중 하나입니다.

예외

ArgumentException

storeName이 올바른 이름이 아닌 경우

예제

#using <System.dll>
#using <System.Security.dll>

using namespace System;
using namespace System::Security::Cryptography;
using namespace System::Security::Cryptography::X509Certificates;
using namespace System::IO;
int main()
{
   
   //Create new X509 store called teststore from the local certificate store.
   X509Store ^ store = gcnew X509Store( "teststore",StoreLocation::CurrentUser );
   store->Open( OpenFlags::ReadWrite );
   X509Certificate2 ^ certificate = gcnew X509Certificate2;
   
   //Create certificates from certificate files.
   //You must put in a valid path to three certificates in the following constructors.
   X509Certificate2 ^ certificate1 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate2 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate5 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   
   //Create a collection and add two of the certificates.
   X509Certificate2Collection ^ collection = gcnew X509Certificate2Collection;
   collection->Add( certificate2 );
   collection->Add( certificate5 );
   
   //Add certificates to the store.
   store->Add( certificate1 );
   store->AddRange( collection );
   X509Certificate2Collection ^ storecollection = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "Store name: {0}", store->Name );
   Console::WriteLine( "Store location: {0}", store->Location );
   System::Collections::IEnumerator^ myEnum = storecollection->GetEnumerator();
   while ( myEnum->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a certificate.
   store->Remove( certificate1 );
   X509Certificate2Collection ^ storecollection2 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   System::Collections::IEnumerator^ myEnum1 = storecollection2->GetEnumerator();
   while ( myEnum1->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum1->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a range of certificates.
   store->RemoveRange( collection );
   X509Certificate2Collection ^ storecollection3 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   if ( storecollection3->Count == 0 )
   {
      Console::WriteLine( "Store contains no certificates." );
   }
   else
   {
      System::Collections::IEnumerator^ myEnum2 = storecollection3->GetEnumerator();
      while ( myEnum2->MoveNext() )
      {
         X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum2->Current);
         Console::WriteLine( "certificate name: {0}", x509->Subject );
      }
   }

   
   //Close the store.
   store->Close();
}

using System;
using System.Security.Cryptography;
using System.Security.Cryptography.X509Certificates;
using System.IO;

public class X509store2
{
    public static void Main (string[] args)
    {
        //Create new X509 store called teststore from the local certificate store.
        X509Store store = new X509Store ("teststore", StoreLocation.CurrentUser);
        store.Open (OpenFlags.ReadWrite);
        X509Certificate2 certificate = new X509Certificate2 ();

        //Create certificates from certificate files.
        //You must put in a valid path to three certificates in the following constructors.
        X509Certificate2 certificate1 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate2 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate5 = new X509Certificate2 ("c:\\mycerts\\*****.cer");

        //Create a collection and add two of the certificates.
        X509Certificate2Collection collection = new X509Certificate2Collection ();
        collection.Add (certificate2);
        collection.Add (certificate5);

        //Add certificates to the store.
        store.Add (certificate1);
        store.AddRange (collection);

        X509Certificate2Collection storecollection = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("Store name: {0}", store.Name);
        Console.WriteLine ("Store location: {0}", store.Location);
        foreach (X509Certificate2 x509 in storecollection)
        {
            Console.WriteLine("certificate name: {0}",x509.Subject);
        }

        //Remove a certificate.
        store.Remove (certificate1);
        X509Certificate2Collection storecollection2 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        foreach (X509Certificate2 x509 in storecollection2)
        {
            Console.WriteLine ("certificate name: {0}", x509.Subject);
        }

        //Remove a range of certificates.
        store.RemoveRange (collection);
        X509Certificate2Collection storecollection3 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        if (storecollection3.Count == 0)
        {
            Console.WriteLine ("Store contains no certificates.");
        }
        else
        {
            foreach (X509Certificate2 x509 in storecollection3)
            {
                Console.WriteLine ("certificate name: {0}", x509.Subject);
            }
        }

        //Close the store.
        store.Close ();
    }	
}

Imports System.Security.Cryptography
Imports System.Security.Cryptography.X509Certificates
Imports System.IO



Class X509store2

    Shared Sub Main(ByVal args() As String)
        'Create new X509 store called teststore from the local certificate store.
        Dim store As New X509Store("teststore", StoreLocation.CurrentUser)
        store.Open(OpenFlags.ReadWrite)
        Dim certificate As New X509Certificate2()

        'Create certificates from certificate files.
        'You must put in a valid path to three certificates in the following constructors.
        Dim certificate1 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate2 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate5 As New X509Certificate2("c:\mycerts\*****.cer")

        'Create a collection and add two of the certificates.
        Dim collection As New X509Certificate2Collection()
        collection.Add(certificate2)
        collection.Add(certificate5)

        'Add certificates to the store.
        store.Add(certificate1)
        store.AddRange(collection)

        Dim storecollection As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("Store name: {0}", store.Name)
        Console.WriteLine("Store location: {0}", store.Location)
        Dim x509 As X509Certificate2
        For Each x509 In storecollection
            Console.WriteLine("certificate name: {0}", x509.Subject)
        Next x509

        'Remove a certificate.
        store.Remove(certificate1)
        Dim storecollection2 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        Dim x509a As X509Certificate2
        For Each x509a In storecollection2
            Console.WriteLine("certificate name: {0}", x509a.Subject)
        Next x509a

        'Remove a range of certificates.
        store.RemoveRange(collection)
        Dim storecollection3 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        If storecollection3.Count = 0 Then
            Console.WriteLine("Store contains no certificates.")
        Else
            Dim x509b As X509Certificate2
            For Each x509b In storecollection3
                Console.WriteLine("certificate name: {0}", x509b.Subject)
            Next x509b
        End If

        'Close the store.
        store.Close()

    End Sub
End Class

설명

이 생성자를 사용하여 열거 StoreName된 값에 해당하는 현재 사용자에 대한 X.509 저장소를 만듭니다.

적용 대상

X509Store(String)

지정된 저장소 이름을 사용하여 X509Store 클래스의 새 인스턴스를 초기화합니다.

public:
 X509Store(System::String ^ storeName);

public X509Store (string storeName);

new System.Security.Cryptography.X509Certificates.X509Store : string -> System.Security.Cryptography.X509Certificates.X509Store

Public Sub New (storeName As String)

매개 변수

storeName: String

인증서 저장소의 이름입니다.

예제

#using <System.dll>
#using <System.Security.dll>

using namespace System;
using namespace System::Security::Cryptography;
using namespace System::Security::Cryptography::X509Certificates;
using namespace System::IO;
int main()
{
   
   //Create new X509 store called teststore from the local certificate store.
   X509Store ^ store = gcnew X509Store( "teststore",StoreLocation::CurrentUser );
   store->Open( OpenFlags::ReadWrite );
   X509Certificate2 ^ certificate = gcnew X509Certificate2;
   
   //Create certificates from certificate files.
   //You must put in a valid path to three certificates in the following constructors.
   X509Certificate2 ^ certificate1 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate2 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate5 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   
   //Create a collection and add two of the certificates.
   X509Certificate2Collection ^ collection = gcnew X509Certificate2Collection;
   collection->Add( certificate2 );
   collection->Add( certificate5 );
   
   //Add certificates to the store.
   store->Add( certificate1 );
   store->AddRange( collection );
   X509Certificate2Collection ^ storecollection = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "Store name: {0}", store->Name );
   Console::WriteLine( "Store location: {0}", store->Location );
   System::Collections::IEnumerator^ myEnum = storecollection->GetEnumerator();
   while ( myEnum->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a certificate.
   store->Remove( certificate1 );
   X509Certificate2Collection ^ storecollection2 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   System::Collections::IEnumerator^ myEnum1 = storecollection2->GetEnumerator();
   while ( myEnum1->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum1->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a range of certificates.
   store->RemoveRange( collection );
   X509Certificate2Collection ^ storecollection3 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   if ( storecollection3->Count == 0 )
   {
      Console::WriteLine( "Store contains no certificates." );
   }
   else
   {
      System::Collections::IEnumerator^ myEnum2 = storecollection3->GetEnumerator();
      while ( myEnum2->MoveNext() )
      {
         X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum2->Current);
         Console::WriteLine( "certificate name: {0}", x509->Subject );
      }
   }

   
   //Close the store.
   store->Close();
}

using System;
using System.Security.Cryptography;
using System.Security.Cryptography.X509Certificates;
using System.IO;

public class X509store2
{
    public static void Main (string[] args)
    {
        //Create new X509 store called teststore from the local certificate store.
        X509Store store = new X509Store ("teststore", StoreLocation.CurrentUser);
        store.Open (OpenFlags.ReadWrite);
        X509Certificate2 certificate = new X509Certificate2 ();

        //Create certificates from certificate files.
        //You must put in a valid path to three certificates in the following constructors.
        X509Certificate2 certificate1 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate2 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate5 = new X509Certificate2 ("c:\\mycerts\\*****.cer");

        //Create a collection and add two of the certificates.
        X509Certificate2Collection collection = new X509Certificate2Collection ();
        collection.Add (certificate2);
        collection.Add (certificate5);

        //Add certificates to the store.
        store.Add (certificate1);
        store.AddRange (collection);

        X509Certificate2Collection storecollection = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("Store name: {0}", store.Name);
        Console.WriteLine ("Store location: {0}", store.Location);
        foreach (X509Certificate2 x509 in storecollection)
        {
            Console.WriteLine("certificate name: {0}",x509.Subject);
        }

        //Remove a certificate.
        store.Remove (certificate1);
        X509Certificate2Collection storecollection2 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        foreach (X509Certificate2 x509 in storecollection2)
        {
            Console.WriteLine ("certificate name: {0}", x509.Subject);
        }

        //Remove a range of certificates.
        store.RemoveRange (collection);
        X509Certificate2Collection storecollection3 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        if (storecollection3.Count == 0)
        {
            Console.WriteLine ("Store contains no certificates.");
        }
        else
        {
            foreach (X509Certificate2 x509 in storecollection3)
            {
                Console.WriteLine ("certificate name: {0}", x509.Subject);
            }
        }

        //Close the store.
        store.Close ();
    }	
}

Imports System.Security.Cryptography
Imports System.Security.Cryptography.X509Certificates
Imports System.IO



Class X509store2

    Shared Sub Main(ByVal args() As String)
        'Create new X509 store called teststore from the local certificate store.
        Dim store As New X509Store("teststore", StoreLocation.CurrentUser)
        store.Open(OpenFlags.ReadWrite)
        Dim certificate As New X509Certificate2()

        'Create certificates from certificate files.
        'You must put in a valid path to three certificates in the following constructors.
        Dim certificate1 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate2 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate5 As New X509Certificate2("c:\mycerts\*****.cer")

        'Create a collection and add two of the certificates.
        Dim collection As New X509Certificate2Collection()
        collection.Add(certificate2)
        collection.Add(certificate5)

        'Add certificates to the store.
        store.Add(certificate1)
        store.AddRange(collection)

        Dim storecollection As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("Store name: {0}", store.Name)
        Console.WriteLine("Store location: {0}", store.Location)
        Dim x509 As X509Certificate2
        For Each x509 In storecollection
            Console.WriteLine("certificate name: {0}", x509.Subject)
        Next x509

        'Remove a certificate.
        store.Remove(certificate1)
        Dim storecollection2 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        Dim x509a As X509Certificate2
        For Each x509a In storecollection2
            Console.WriteLine("certificate name: {0}", x509a.Subject)
        Next x509a

        'Remove a range of certificates.
        store.RemoveRange(collection)
        Dim storecollection3 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        If storecollection3.Count = 0 Then
            Console.WriteLine("Store contains no certificates.")
        Else
            Dim x509b As X509Certificate2
            For Each x509b In storecollection3
                Console.WriteLine("certificate name: {0}", x509b.Subject)
            Next x509b
        End If

        'Close the store.
        store.Close()

    End Sub
End Class

설명

현재 사용자의 특정 X.509 저장소 이름을 사용하여 개체를 만들 X509Store 려면 이 생성자를 사용합니다. 새 저장소를 만들려면 존재하지 않는 이름을 지정합니다. 해당 이름으로 새 저장소가 만들어집니다.

적용 대상

X509Store(StoreName, StoreLocation)

지정된 X509Store 및 StoreName 값을 사용하여 StoreLocation 클래스의 새 인스턴스를 초기화합니다.

public:
 X509Store(System::Security::Cryptography::X509Certificates::StoreName storeName, System::Security::Cryptography::X509Certificates::StoreLocation storeLocation);

public X509Store (System.Security.Cryptography.X509Certificates.StoreName storeName, System.Security.Cryptography.X509Certificates.StoreLocation storeLocation);

new System.Security.Cryptography.X509Certificates.X509Store : System.Security.Cryptography.X509Certificates.StoreName * System.Security.Cryptography.X509Certificates.StoreLocation -> System.Security.Cryptography.X509Certificates.X509Store

Public Sub New (storeName As StoreName, storeLocation As StoreLocation)

매개 변수

storeName: StoreName

X.509 인증서 저장소의 이름을 지정하는 열거형 값 중 하나입니다.

storeLocation: StoreLocation

X.509 인증서 저장소의 위치를 지정하는 열거형 값 중 하나입니다.

예외

ArgumentException

storeLocation이 올바른 위치가 아니거나 storeName이 올바른 이름이 아닌 경우

예제

#using <System.dll>
#using <System.Security.dll>

using namespace System;
using namespace System::Security::Cryptography;
using namespace System::Security::Cryptography::X509Certificates;
using namespace System::IO;
int main()
{
   
   //Create new X509 store called teststore from the local certificate store.
   X509Store ^ store = gcnew X509Store( "teststore",StoreLocation::CurrentUser );
   store->Open( OpenFlags::ReadWrite );
   X509Certificate2 ^ certificate = gcnew X509Certificate2;
   
   //Create certificates from certificate files.
   //You must put in a valid path to three certificates in the following constructors.
   X509Certificate2 ^ certificate1 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate2 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate5 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   
   //Create a collection and add two of the certificates.
   X509Certificate2Collection ^ collection = gcnew X509Certificate2Collection;
   collection->Add( certificate2 );
   collection->Add( certificate5 );
   
   //Add certificates to the store.
   store->Add( certificate1 );
   store->AddRange( collection );
   X509Certificate2Collection ^ storecollection = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "Store name: {0}", store->Name );
   Console::WriteLine( "Store location: {0}", store->Location );
   System::Collections::IEnumerator^ myEnum = storecollection->GetEnumerator();
   while ( myEnum->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a certificate.
   store->Remove( certificate1 );
   X509Certificate2Collection ^ storecollection2 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   System::Collections::IEnumerator^ myEnum1 = storecollection2->GetEnumerator();
   while ( myEnum1->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum1->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a range of certificates.
   store->RemoveRange( collection );
   X509Certificate2Collection ^ storecollection3 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   if ( storecollection3->Count == 0 )
   {
      Console::WriteLine( "Store contains no certificates." );
   }
   else
   {
      System::Collections::IEnumerator^ myEnum2 = storecollection3->GetEnumerator();
      while ( myEnum2->MoveNext() )
      {
         X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum2->Current);
         Console::WriteLine( "certificate name: {0}", x509->Subject );
      }
   }

   
   //Close the store.
   store->Close();
}

using System;
using System.Security.Cryptography;
using System.Security.Cryptography.X509Certificates;
using System.IO;

public class X509store2
{
    public static void Main (string[] args)
    {
        //Create new X509 store called teststore from the local certificate store.
        X509Store store = new X509Store ("teststore", StoreLocation.CurrentUser);
        store.Open (OpenFlags.ReadWrite);
        X509Certificate2 certificate = new X509Certificate2 ();

        //Create certificates from certificate files.
        //You must put in a valid path to three certificates in the following constructors.
        X509Certificate2 certificate1 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate2 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate5 = new X509Certificate2 ("c:\\mycerts\\*****.cer");

        //Create a collection and add two of the certificates.
        X509Certificate2Collection collection = new X509Certificate2Collection ();
        collection.Add (certificate2);
        collection.Add (certificate5);

        //Add certificates to the store.
        store.Add (certificate1);
        store.AddRange (collection);

        X509Certificate2Collection storecollection = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("Store name: {0}", store.Name);
        Console.WriteLine ("Store location: {0}", store.Location);
        foreach (X509Certificate2 x509 in storecollection)
        {
            Console.WriteLine("certificate name: {0}",x509.Subject);
        }

        //Remove a certificate.
        store.Remove (certificate1);
        X509Certificate2Collection storecollection2 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        foreach (X509Certificate2 x509 in storecollection2)
        {
            Console.WriteLine ("certificate name: {0}", x509.Subject);
        }

        //Remove a range of certificates.
        store.RemoveRange (collection);
        X509Certificate2Collection storecollection3 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        if (storecollection3.Count == 0)
        {
            Console.WriteLine ("Store contains no certificates.");
        }
        else
        {
            foreach (X509Certificate2 x509 in storecollection3)
            {
                Console.WriteLine ("certificate name: {0}", x509.Subject);
            }
        }

        //Close the store.
        store.Close ();
    }	
}

Imports System.Security.Cryptography
Imports System.Security.Cryptography.X509Certificates
Imports System.IO



Class X509store2

    Shared Sub Main(ByVal args() As String)
        'Create new X509 store called teststore from the local certificate store.
        Dim store As New X509Store("teststore", StoreLocation.CurrentUser)
        store.Open(OpenFlags.ReadWrite)
        Dim certificate As New X509Certificate2()

        'Create certificates from certificate files.
        'You must put in a valid path to three certificates in the following constructors.
        Dim certificate1 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate2 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate5 As New X509Certificate2("c:\mycerts\*****.cer")

        'Create a collection and add two of the certificates.
        Dim collection As New X509Certificate2Collection()
        collection.Add(certificate2)
        collection.Add(certificate5)

        'Add certificates to the store.
        store.Add(certificate1)
        store.AddRange(collection)

        Dim storecollection As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("Store name: {0}", store.Name)
        Console.WriteLine("Store location: {0}", store.Location)
        Dim x509 As X509Certificate2
        For Each x509 In storecollection
            Console.WriteLine("certificate name: {0}", x509.Subject)
        Next x509

        'Remove a certificate.
        store.Remove(certificate1)
        Dim storecollection2 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        Dim x509a As X509Certificate2
        For Each x509a In storecollection2
            Console.WriteLine("certificate name: {0}", x509a.Subject)
        Next x509a

        'Remove a range of certificates.
        store.RemoveRange(collection)
        Dim storecollection3 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        If storecollection3.Count = 0 Then
            Console.WriteLine("Store contains no certificates.")
        Else
            Dim x509b As X509Certificate2
            For Each x509b In storecollection3
                Console.WriteLine("certificate name: {0}", x509b.Subject)
            Next x509b
        End If

        'Close the store.
        store.Close()

    End Sub
End Class

설명

이 생성자를 사용하여 저장소 이름과 저장소 위치를 모두 지정하는 개체를 만듭니 X509Store 다.

적용 대상

X509Store(String, StoreLocation)

지정된 저장소 이름 및 저장소 위치를 사용하여 X509Store 클래스의 새 인스턴스를 초기화합니다.

public:
 X509Store(System::String ^ storeName, System::Security::Cryptography::X509Certificates::StoreLocation storeLocation);

public X509Store (string storeName, System.Security.Cryptography.X509Certificates.StoreLocation storeLocation);

new System.Security.Cryptography.X509Certificates.X509Store : string * System.Security.Cryptography.X509Certificates.StoreLocation -> System.Security.Cryptography.X509Certificates.X509Store

Public Sub New (storeName As String, storeLocation As StoreLocation)

매개 변수

storeName: String

인증서 저장소의 이름입니다.

storeLocation: StoreLocation

X.509 인증서 저장소의 위치를 지정하는 열거형 값 중 하나입니다.

예외

ArgumentException

storeLocation에 잘못된 값이 있는 경우

예제

#using <System.dll>
#using <System.Security.dll>

using namespace System;
using namespace System::Security::Cryptography;
using namespace System::Security::Cryptography::X509Certificates;
using namespace System::IO;
int main()
{
   
   //Create new X509 store called teststore from the local certificate store.
   X509Store ^ store = gcnew X509Store( "teststore",StoreLocation::CurrentUser );
   store->Open( OpenFlags::ReadWrite );
   X509Certificate2 ^ certificate = gcnew X509Certificate2;
   
   //Create certificates from certificate files.
   //You must put in a valid path to three certificates in the following constructors.
   X509Certificate2 ^ certificate1 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate2 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate5 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   
   //Create a collection and add two of the certificates.
   X509Certificate2Collection ^ collection = gcnew X509Certificate2Collection;
   collection->Add( certificate2 );
   collection->Add( certificate5 );
   
   //Add certificates to the store.
   store->Add( certificate1 );
   store->AddRange( collection );
   X509Certificate2Collection ^ storecollection = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "Store name: {0}", store->Name );
   Console::WriteLine( "Store location: {0}", store->Location );
   System::Collections::IEnumerator^ myEnum = storecollection->GetEnumerator();
   while ( myEnum->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a certificate.
   store->Remove( certificate1 );
   X509Certificate2Collection ^ storecollection2 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   System::Collections::IEnumerator^ myEnum1 = storecollection2->GetEnumerator();
   while ( myEnum1->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum1->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a range of certificates.
   store->RemoveRange( collection );
   X509Certificate2Collection ^ storecollection3 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   if ( storecollection3->Count == 0 )
   {
      Console::WriteLine( "Store contains no certificates." );
   }
   else
   {
      System::Collections::IEnumerator^ myEnum2 = storecollection3->GetEnumerator();
      while ( myEnum2->MoveNext() )
      {
         X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum2->Current);
         Console::WriteLine( "certificate name: {0}", x509->Subject );
      }
   }

   
   //Close the store.
   store->Close();
}

using System;
using System.Security.Cryptography;
using System.Security.Cryptography.X509Certificates;
using System.IO;

public class X509store2
{
    public static void Main (string[] args)
    {
        //Create new X509 store called teststore from the local certificate store.
        X509Store store = new X509Store ("teststore", StoreLocation.CurrentUser);
        store.Open (OpenFlags.ReadWrite);
        X509Certificate2 certificate = new X509Certificate2 ();

        //Create certificates from certificate files.
        //You must put in a valid path to three certificates in the following constructors.
        X509Certificate2 certificate1 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate2 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate5 = new X509Certificate2 ("c:\\mycerts\\*****.cer");

        //Create a collection and add two of the certificates.
        X509Certificate2Collection collection = new X509Certificate2Collection ();
        collection.Add (certificate2);
        collection.Add (certificate5);

        //Add certificates to the store.
        store.Add (certificate1);
        store.AddRange (collection);

        X509Certificate2Collection storecollection = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("Store name: {0}", store.Name);
        Console.WriteLine ("Store location: {0}", store.Location);
        foreach (X509Certificate2 x509 in storecollection)
        {
            Console.WriteLine("certificate name: {0}",x509.Subject);
        }

        //Remove a certificate.
        store.Remove (certificate1);
        X509Certificate2Collection storecollection2 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        foreach (X509Certificate2 x509 in storecollection2)
        {
            Console.WriteLine ("certificate name: {0}", x509.Subject);
        }

        //Remove a range of certificates.
        store.RemoveRange (collection);
        X509Certificate2Collection storecollection3 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        if (storecollection3.Count == 0)
        {
            Console.WriteLine ("Store contains no certificates.");
        }
        else
        {
            foreach (X509Certificate2 x509 in storecollection3)
            {
                Console.WriteLine ("certificate name: {0}", x509.Subject);
            }
        }

        //Close the store.
        store.Close ();
    }	
}

Imports System.Security.Cryptography
Imports System.Security.Cryptography.X509Certificates
Imports System.IO



Class X509store2

    Shared Sub Main(ByVal args() As String)
        'Create new X509 store called teststore from the local certificate store.
        Dim store As New X509Store("teststore", StoreLocation.CurrentUser)
        store.Open(OpenFlags.ReadWrite)
        Dim certificate As New X509Certificate2()

        'Create certificates from certificate files.
        'You must put in a valid path to three certificates in the following constructors.
        Dim certificate1 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate2 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate5 As New X509Certificate2("c:\mycerts\*****.cer")

        'Create a collection and add two of the certificates.
        Dim collection As New X509Certificate2Collection()
        collection.Add(certificate2)
        collection.Add(certificate5)

        'Add certificates to the store.
        store.Add(certificate1)
        store.AddRange(collection)

        Dim storecollection As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("Store name: {0}", store.Name)
        Console.WriteLine("Store location: {0}", store.Location)
        Dim x509 As X509Certificate2
        For Each x509 In storecollection
            Console.WriteLine("certificate name: {0}", x509.Subject)
        Next x509

        'Remove a certificate.
        store.Remove(certificate1)
        Dim storecollection2 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        Dim x509a As X509Certificate2
        For Each x509a In storecollection2
            Console.WriteLine("certificate name: {0}", x509a.Subject)
        Next x509a

        'Remove a range of certificates.
        store.RemoveRange(collection)
        Dim storecollection3 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        If storecollection3.Count = 0 Then
            Console.WriteLine("Store contains no certificates.")
        Else
            Dim x509b As X509Certificate2
            For Each x509b In storecollection3
                Console.WriteLine("certificate name: {0}", x509b.Subject)
            Next x509b
        End If

        'Close the store.
        store.Close()

    End Sub
End Class

설명

이 생성자를 사용하여 저장소 이름 및 위치를 사용하여 개체를 만듭니 X509Store 다. 새 저장소를 만들려면 존재하지 않는 이름을 지정합니다. 해당 이름으로 새 저장소가 만들어집니다.

적용 대상

X509Store(StoreName, StoreLocation, OpenFlags)

지정된 저장소 이름 및 저장소 위치 값을 사용하여 X509Store 클래스의 새 인스턴스를 초기화한 다음, 지정된 플래그를 사용하여 엽니다.

public:
 X509Store(System::Security::Cryptography::X509Certificates::StoreName storeName, System::Security::Cryptography::X509Certificates::StoreLocation storeLocation, System::Security::Cryptography::X509Certificates::OpenFlags flags);

public X509Store (System.Security.Cryptography.X509Certificates.StoreName storeName, System.Security.Cryptography.X509Certificates.StoreLocation storeLocation, System.Security.Cryptography.X509Certificates.OpenFlags flags);

new System.Security.Cryptography.X509Certificates.X509Store : System.Security.Cryptography.X509Certificates.StoreName * System.Security.Cryptography.X509Certificates.StoreLocation * System.Security.Cryptography.X509Certificates.OpenFlags -> System.Security.Cryptography.X509Certificates.X509Store

Public Sub New (storeName As StoreName, storeLocation As StoreLocation, flags As OpenFlags)

매개 변수

storeName: StoreName

X.509 인증서 저장소의 이름을 지정하는 열거형 값 중 하나입니다.

storeLocation: StoreLocation

X.509 인증서 저장소의 위치를 지정하는 열거형 값 중 하나입니다.

flags: OpenFlags

X.509 인증서 저장소를 여는 방법을 지정하는 열거형 값의 비트 조합입니다.

예외

ArgumentException

storeLocation이 올바른 위치가 아니거나 storeName이 올바른 이름이 아닌 경우

CryptographicException

저장소를 열 수 없습니다.

적용 대상

X509Store(String, StoreLocation, OpenFlags)

지정된 저장소 이름 및 저장소 위치 값을 사용하여 X509Store 클래스의 새 인스턴스를 초기화한 다음, 지정된 플래그를 사용하여 엽니다.

public:
 X509Store(System::String ^ storeName, System::Security::Cryptography::X509Certificates::StoreLocation storeLocation, System::Security::Cryptography::X509Certificates::OpenFlags flags);

public X509Store (string storeName, System.Security.Cryptography.X509Certificates.StoreLocation storeLocation, System.Security.Cryptography.X509Certificates.OpenFlags flags);

new System.Security.Cryptography.X509Certificates.X509Store : string * System.Security.Cryptography.X509Certificates.StoreLocation * System.Security.Cryptography.X509Certificates.OpenFlags -> System.Security.Cryptography.X509Certificates.X509Store

Public Sub New (storeName As String, storeLocation As StoreLocation, flags As OpenFlags)

매개 변수

storeName: String

인증서 저장소의 이름입니다.

storeLocation: StoreLocation

X.509 인증서 저장소의 위치를 지정하는 열거형 값 중 하나입니다.

flags: OpenFlags

X.509 인증서 저장소를 여는 방법을 지정하는 열거형 값의 비트 조합입니다.

예외

ArgumentException

storeLocation은 올바른 위치가 아닙니다.

적용 대상

X509Store 생성자

정의

오버로드

X509Store()

예제

설명

적용 대상

X509Store(IntPtr)

매개 변수

예외

설명

적용 대상

X509Store(StoreLocation)

매개 변수

예제

설명

적용 대상

X509Store(StoreName)

매개 변수

예외

예제

설명

적용 대상

X509Store(String)

매개 변수

예제

설명

적용 대상

X509Store(StoreName, StoreLocation)

매개 변수

예외

예제

설명

적용 대상

X509Store(String, StoreLocation)

매개 변수

예외

예제

설명

적용 대상

X509Store(StoreName, StoreLocation, OpenFlags)

매개 변수

예외

적용 대상

X509Store(String, StoreLocation, OpenFlags)

매개 변수

예외

적용 대상

추가 리소스