AppSettingsSection AppSettingsSection AppSettingsSection AppSettingsSection Class

Определение

Обеспечивает поддержку системы конфигурации для разделов конфигурации appSettings.Provides configuration system support for the appSettings configuration section. Этот класс не наследуется.This class cannot be inherited.

public ref class AppSettingsSection sealed : System::Configuration::ConfigurationSection
public sealed class AppSettingsSection : System.Configuration.ConfigurationSection
type AppSettingsSection = class
    inherit ConfigurationSection
Public NotInheritable Class AppSettingsSection
Inherits ConfigurationSection
Наследование

Примеры

В следующем примере показано, как использовать AppSettingsSection класс в консольном приложении.The following example shows how to use the AppSettingsSection class in a console application. Он считывает и записывает пары "ключ-значение", содержащиеся appSettings в разделе.It reads and writes the key/value pairs that are contained by the appSettings section. В нем также показано, File как получить доступ к свойству AppSettingsSection класса.It also shows how to access the File property of the AppSettingsSection class.

Примечание

Перед компиляцией этого кода добавьте в проект ссылку на System. Configuration. dll.Before you compile this code, add a reference in your project to System.Configuration.dll.

using System;
using System.Collections.Specialized;
using System.Configuration;
using System.Text;
using System.IO;

// IMPORTANT: To compile this example, you must add to the project 
// a reference to the System.Configuration assembly.
//

class UsingAppSettingsSection
{
    #region UsingAppSettingsSection

    // This function shows how to use the File property of the
    // appSettings section.
    // The File property is used to specify an auxiliary 
    // configuration file.
    // Usually you create an auxiliary file off-line to store 
    // additional settings that you can modify as needed without
    // causing an application restart,as in the case of a Web 
    // application.
    // These settings are then added to the ones defined in the
    // application configuration file.
    static void  IntializeConfigurationFile()
    {
        // Create a set of unique key/value pairs to store in
        // the appSettings section of an auxiliary configuration
        // file.
        string time1 = String.Concat(DateTime.Now.ToLongDateString(),
                               " ", DateTime.Now.ToLongTimeString());

        string time2 = String.Concat(DateTime.Now.ToLongDateString(),
                               " ", new DateTime(2009, 06, 30).ToLongTimeString());
       
        string[] buffer = {"<appSettings>",
        "<add key='AuxAppStg0' value='" + time1 + "'/>", 
        "<add key='AuxAppStg1' value='" + time2 + "'/>",
        "</appSettings>"};

        // Create an auxiliary configuration file and store the
        // appSettings defined before.
        // Note creating a file at run-time is just for demo 
        // purposes to run this example.
        File.WriteAllLines("auxiliaryFile.config", buffer);
        
        // Get the current configuration associated
        // with the application.
        System.Configuration.Configuration config =
           ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None);

        // Associate the auxiliary with the default
        // configuration file. 
        System.Configuration.AppSettingsSection appSettings = config.AppSettings;
        appSettings.File = "auxiliaryFile.config";
        
        // Save the configuration file.
        config.Save(ConfigurationSaveMode.Modified);

        // Force a reload in memory of the 
        // changed section.
        ConfigurationManager.RefreshSection("appSettings");

    }

    // This function shows how to write a key/value
    // pair to the appSettings section.
    static void WriteAppSettings()
    {
        try
        {
            // Get the application configuration file.
            System.Configuration.Configuration config =
               ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None);

            // Create a unique key/value pair to add to 
            // the appSettings section.
            string keyName = "AppStg" + config.AppSettings.Settings.Count;
            string value = string.Concat(DateTime.Now.ToLongDateString(),
                           " ", DateTime.Now.ToLongTimeString());

            // Add the key/value pair to the appSettings 
            // section.
            // config.AppSettings.Settings.Add(keyName, value);
            System.Configuration.AppSettingsSection appSettings = config.AppSettings;
            appSettings.Settings.Add(keyName, value);

            // Save the configuration file.
            config.Save(ConfigurationSaveMode.Modified);

            // Force a reload in memory of the changed section.
            // This to read the section with the
            // updated values.
            ConfigurationManager.RefreshSection("appSettings");

            Console.WriteLine(
                "Added the following Key: {0} Value: {1} .", keyName, value);
        }
        catch (Exception e)
        {
            Console.WriteLine("Exception raised: {0}",
                e.Message);
        }
    }

    // This function shows how to read the key/value
    // pairs (settings collection)contained in the 
    // appSettings section.
    static void ReadAppSettings()
	{
        try
        {

            // Get the configuration file.
            System.Configuration.Configuration config =
                ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None);

            // Get the appSettings section.
            System.Configuration.AppSettingsSection appSettings =
                (System.Configuration.AppSettingsSection)config.GetSection("appSettings");

            // Get the auxiliary file name.
            Console.WriteLine("Auxiliary file: {0}", config.AppSettings.File);

            
            // Get the settings collection (key/value pairs).
            if (appSettings.Settings.Count != 0)
            {
                foreach (string key in appSettings.Settings.AllKeys)
                {
                    string value = appSettings.Settings[key].Value;
                    Console.WriteLine("Key: {0} Value: {1}", key, value);
                }
            }
            else
                Console.WriteLine("The appSettings section is empty. Write first.");
        }
        catch (Exception e)
        {
            Console.WriteLine("Exception raised: {0}",
                e.Message);
        }
	}

    #endregion UsingAppSettingsSection


    #region ApplicationMain

    // This class obtains user's input and provide feedback.
    // It contains the application Main.
    class ApplicationMain
    {
        // Display user's menu.
        public static void UserMenu()
        {
            StringBuilder buffer = new StringBuilder();

            buffer.AppendLine("Please, make your selection.");
            buffer.AppendLine("1    -- Write appSettings section.");
            buffer.AppendLine("2    -- Read  appSettings section.");
            buffer.AppendLine("?    -- Display help.");
            buffer.AppendLine("Q,q  -- Exit the application.");

            Console.Write(buffer.ToString());
        }

        // Obtain user's input and provide
        // feedback.
        static void Main(string[] args)
        {
            // Define user selection string.
            string selection;

            // Get the name of the application.
            string appName =
              Environment.GetCommandLineArgs()[0];

            IntializeConfigurationFile();

            // Get user selection.
            while (true)
            {

                UserMenu();
                Console.Write("> ");
                selection = Console.ReadLine();
                if (!string.IsNullOrEmpty(selection))
                    break;
            }

            while (selection.ToLower() != "q")
            {
                // Process user's input.
                switch (selection)
                {
                    case "1":
                        WriteAppSettings();
                        break;

                    case "2":
                        ReadAppSettings();
                        break;

                    default:
                        UserMenu();
                        break;
                }
                Console.Write("> ");
                selection = Console.ReadLine();
            }
        }
    }
    #endregion ApplicationMain
}

Imports System.Collections.Specialized
Imports System.Configuration
Imports System.Text
Imports System.IO

' IMPORTANT: To compile this example, you must add to the project 
' a reference to the System.Configuration assembly.
'

Class UsingAppSettingsSection
#Region "UsingAppSettingsSection"

    ' This function shows how to use the File property of the
    ' appSettings section.
    ' The File property is used to specify an auxiliary 
    ' configuration file.
    ' Usually you create an auxiliary file off-line to store 
    ' additional settings that you can modify as needed without
    ' causing an application restart,as in the case of a Web 
    ' application.
    ' These settings are then added to the ones defined in the
    ' application configuration file.
    Private Shared Sub IntializeConfigurationFile()
        ' Create a set of unique key/value pairs to store in
        ' the appSettings section of an auxiliary configuration
        ' file.
        Dim time1 As String = String.Concat(Date.Now.ToLongDateString(), " ", Date.Now.ToLongTimeString())

        Dim time2 As String = String.Concat(Date.Now.ToLongDateString(), " ", New Date(2009, 6, 30).ToLongTimeString())

        Dim buffer() As String = {"<appSettings>", "<add key='AuxAppStg0' value='" & time1 & "'/>", "<add key='AuxAppStg1' value='" & time2 & "'/>", "</appSettings>"}

        ' Create an auxiliary configuration file and store the
        ' appSettings defined before.
        ' Note creating a file at run-time is just for demo 
        ' purposes to run this example.
        File.WriteAllLines("auxiliaryFile.config", buffer)

        ' Get the current configuration associated
        ' with the application.
        Dim config As System.Configuration.Configuration = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None)

        ' Associate the auxiliary with the default
        ' configuration file. 
        Dim appSettings As System.Configuration.AppSettingsSection = config.AppSettings
        appSettings.File = "auxiliaryFile.config"

        ' Save the configuration file.
        config.Save(ConfigurationSaveMode.Modified)

        ' Force a reload in memory of the 
        ' changed section.
        ConfigurationManager.RefreshSection("appSettings")

    End Sub

    ' This function shows how to write a key/value
    ' pair to the appSettings section.
    Private Shared Sub WriteAppSettings()
        Try
            ' Get the application configuration file.
            Dim config As System.Configuration.Configuration = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None)

            ' Create a unique key/value pair to add to 
            ' the appSettings section.
            Dim keyName As String = "AppStg" & config.AppSettings.Settings.Count
            Dim value As String = String.Concat(Date.Now.ToLongDateString(), " ", Date.Now.ToLongTimeString())

            ' Add the key/value pair to the appSettings 
            ' section.
            ' config.AppSettings.Settings.Add(keyName, value);
            Dim appSettings As System.Configuration.AppSettingsSection = config.AppSettings
            appSettings.Settings.Add(keyName, value)

            ' Save the configuration file.
            config.Save(ConfigurationSaveMode.Modified)

            ' Force a reload in memory of the changed section.
            ' This to read the section with the
            ' updated values.
            ConfigurationManager.RefreshSection("appSettings")

            Console.WriteLine("Added the following Key: {0} Value: {1} .", keyName, value)
        Catch e As Exception
            Console.WriteLine("Exception raised: {0}", e.Message)
        End Try
    End Sub

    ' This function shows how to read the key/value
    ' pairs (settings collection)contained in the 
    ' appSettings section.
    Private Shared Sub ReadAppSettings()
        Try

            ' Get the configuration file.
            Dim config As System.Configuration.Configuration = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None)

            ' Get the appSettings section.
            Dim appSettings As System.Configuration.AppSettingsSection = CType(config.GetSection("appSettings"), System.Configuration.AppSettingsSection)

            ' Get the auxiliary file name.
            Console.WriteLine("Auxiliary file: {0}", config.AppSettings.File)


            ' Get the settings collection (key/value pairs).
            If appSettings.Settings.Count <> 0 Then
                For Each key As String In appSettings.Settings.AllKeys
                    Dim value As String = appSettings.Settings(key).Value
                    Console.WriteLine("Key: {0} Value: {1}", key, value)
                Next key
            Else
                Console.WriteLine("The appSettings section is empty. Write first.")
            End If
        Catch e As Exception
            Console.WriteLine("Exception raised: {0}", e.Message)
        End Try
    End Sub

#End Region ' UsingAppSettingsSection


#Region "ApplicationMain"

    Shared Sub UserMenu()
        Dim buffer As New StringBuilder()

        buffer.AppendLine("Please, make your selection.")
        buffer.AppendLine("1    -- Write appSettings section.")
        buffer.AppendLine("2    -- Read  appSettings section.")
        buffer.AppendLine("?    -- Display help.")
        buffer.AppendLine("Q,q  -- Exit the application.")

        Console.Write(buffer.ToString())
    End Sub

    ' Obtain user's input and provide
    ' feedback.
    Shared Sub Main(ByVal args() As String)
        ' Define user selection string.
        Dim selection As String

        ' Get the name of the application.
        Dim appName As String = Environment.GetCommandLineArgs()(0)

        IntializeConfigurationFile()

        ' Get user selection.
        Do

            UserMenu()
            Console.Write("> ")
            selection = Console.ReadLine()
            If selection <> String.Empty Then
                Exit Do
            End If
        Loop

        Do While selection.ToLower() <> "q"
            ' Process user's input.
            Select Case selection
                Case "1"
                    WriteAppSettings()

                Case "2"
                    ReadAppSettings()

                Case Else
                    UserMenu()
            End Select
            Console.Write("> ")
            selection = Console.ReadLine()
        Loop
    End Sub
    ' End Class
#End Region ' ApplicationMain
End Class
Imports System.Collections.Specialized
Imports System.Configuration
Imports System.Text
Imports System.IO

' IMPORTANT: To compile this example, you must add to the project 
' a reference to the System.Configuration assembly.
'

Class UsingAppSettingsSection
#Region "UsingAppSettingsSection"

    ' This function shows how to use the File property of the
    ' appSettings section.
    ' The File property is used to specify an auxiliary 
    ' configuration file.
    ' Usually you create an auxiliary file off-line to store 
    ' additional settings that you can modify as needed without
    ' causing an application restart,as in the case of a Web 
    ' application.
    ' These settings are then added to the ones defined in the
    ' application configuration file.
    Private Shared Sub IntializeConfigurationFile()
        ' Create a set of unique key/value pairs to store in
        ' the appSettings section of an auxiliary configuration
        ' file.
        Dim time1 As String = String.Concat(Date.Now.ToLongDateString(), " ", Date.Now.ToLongTimeString())

        Dim time2 As String = String.Concat(Date.Now.ToLongDateString(), " ", New Date(2009, 6, 30).ToLongTimeString())

        Dim buffer() As String = {"<appSettings>", "<add key='AuxAppStg0' value='" & time1 & "'/>", "<add key='AuxAppStg1' value='" & time2 & "'/>", "</appSettings>"}

        ' Create an auxiliary configuration file and store the
        ' appSettings defined before.
        ' Note creating a file at run-time is just for demo 
        ' purposes to run this example.
        File.WriteAllLines("auxiliaryFile.config", buffer)

        ' Get the current configuration associated
        ' with the application.
        Dim config As System.Configuration.Configuration = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None)

        ' Associate the auxiliary with the default
        ' configuration file. 
        Dim appSettings As System.Configuration.AppSettingsSection = config.AppSettings
        appSettings.File = "auxiliaryFile.config"

        ' Save the configuration file.
        config.Save(ConfigurationSaveMode.Modified)

        ' Force a reload in memory of the 
        ' changed section.
        ConfigurationManager.RefreshSection("appSettings")

    End Sub

    ' This function shows how to write a key/value
    ' pair to the appSettings section.
    Private Shared Sub WriteAppSettings()
        Try
            ' Get the application configuration file.
            Dim config As System.Configuration.Configuration = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None)

            ' Create a unique key/value pair to add to 
            ' the appSettings section.
            Dim keyName As String = "AppStg" & config.AppSettings.Settings.Count
            Dim value As String = String.Concat(Date.Now.ToLongDateString(), " ", Date.Now.ToLongTimeString())

            ' Add the key/value pair to the appSettings 
            ' section.
            ' config.AppSettings.Settings.Add(keyName, value);
            Dim appSettings As System.Configuration.AppSettingsSection = config.AppSettings
            appSettings.Settings.Add(keyName, value)

            ' Save the configuration file.
            config.Save(ConfigurationSaveMode.Modified)

            ' Force a reload in memory of the changed section.
            ' This to read the section with the
            ' updated values.
            ConfigurationManager.RefreshSection("appSettings")

            Console.WriteLine("Added the following Key: {0} Value: {1} .", keyName, value)
        Catch e As Exception
            Console.WriteLine("Exception raised: {0}", e.Message)
        End Try
    End Sub

    ' This function shows how to read the key/value
    ' pairs (settings collection)contained in the 
    ' appSettings section.
    Private Shared Sub ReadAppSettings()
        Try

            ' Get the configuration file.
            Dim config As System.Configuration.Configuration = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None)

            ' Get the appSettings section.
            Dim appSettings As System.Configuration.AppSettingsSection = CType(config.GetSection("appSettings"), System.Configuration.AppSettingsSection)

            ' Get the auxiliary file name.
            Console.WriteLine("Auxiliary file: {0}", config.AppSettings.File)


            ' Get the settings collection (key/value pairs).
            If appSettings.Settings.Count <> 0 Then
                For Each key As String In appSettings.Settings.AllKeys
                    Dim value As String = appSettings.Settings(key).Value
                    Console.WriteLine("Key: {0} Value: {1}", key, value)
                Next key
            Else
                Console.WriteLine("The appSettings section is empty. Write first.")
            End If
        Catch e As Exception
            Console.WriteLine("Exception raised: {0}", e.Message)
        End Try
    End Sub

#End Region ' UsingAppSettingsSection


#Region "ApplicationMain"

    Shared Sub UserMenu()
        Dim buffer As New StringBuilder()

        buffer.AppendLine("Please, make your selection.")
        buffer.AppendLine("1    -- Write appSettings section.")
        buffer.AppendLine("2    -- Read  appSettings section.")
        buffer.AppendLine("?    -- Display help.")
        buffer.AppendLine("Q,q  -- Exit the application.")

        Console.Write(buffer.ToString())
    End Sub

    ' Obtain user's input and provide
    ' feedback.
    Shared Sub Main(ByVal args() As String)
        ' Define user selection string.
        Dim selection As String

        ' Get the name of the application.
        Dim appName As String = Environment.GetCommandLineArgs()(0)

        IntializeConfigurationFile()

        ' Get user selection.
        Do

            UserMenu()
            Console.Write("> ")
            selection = Console.ReadLine()
            If selection <> String.Empty Then
                Exit Do
            End If
        Loop

        Do While selection.ToLower() <> "q"
            ' Process user's input.
            Select Case selection
                Case "1"
                    WriteAppSettings()

                Case "2"
                    ReadAppSettings()

                Case Else
                    UserMenu()
            End Select
            Console.Write("> ")
            selection = Console.ReadLine()
        Loop
    End Sub
    ' End Class
#End Region ' ApplicationMain
End Class

Комментарии

Раздел конфигурации содержит пары "ключ-значение" string значений для приложения. appSettingsThe appSettings configuration section provides for key/value pairs of string values for an application. Вместо доступа к AppSettingsSection этим значениям с помощью экземпляра объекта следует AppSettings использовать свойство ConfigurationManager класса или AppSettings свойства WebConfigurationManager класса.Rather than accessing these values by using an instance of an AppSettingsSection object, you should use the AppSettings property of the ConfigurationManager class or the AppSettings property of the WebConfigurationManager class.

Конструкторы

AppSettingsSection() AppSettingsSection() AppSettingsSection() AppSettingsSection()

Инициализирует новый экземпляр класса AppSettingsSection.Initializes a new instance of the AppSettingsSection class.

Свойства

CurrentConfiguration CurrentConfiguration CurrentConfiguration CurrentConfiguration

Возвращает ссылку на экземпляр Configuration верхнего уровня, представляющий иерархию конфигурации, к которой относится текущий экземпляр ConfigurationElement.Gets a reference to the top-level Configuration instance that represents the configuration hierarchy that the current ConfigurationElement instance belongs to.

(Inherited from ConfigurationElement)
ElementInformation ElementInformation ElementInformation ElementInformation

Возвращает объект ElementInformation, содержащий неизменяемую информацию и функциональность объекта ConfigurationElement.Gets an ElementInformation object that contains the non-customizable information and functionality of the ConfigurationElement object.

(Inherited from ConfigurationElement)
ElementProperty ElementProperty ElementProperty ElementProperty

Возвращает объект ConfigurationElementProperty, представляющий сам объект ConfigurationElement.Gets the ConfigurationElementProperty object that represents the ConfigurationElement object itself.

(Inherited from ConfigurationElement)
EvaluationContext EvaluationContext EvaluationContext EvaluationContext

Возвращает объект ContextInformation для объекта ConfigurationElement.Gets the ContextInformation object for the ConfigurationElement object.

(Inherited from ConfigurationElement)
File File File File

Получает или задает файл конфигурации, предоставляющий дополнительные параметры или переопределяющий параметры, указанные в элементе appSettings.Gets or sets a configuration file that provides additional settings or overrides the settings specified in the appSettings element.

HasContext HasContext HasContext HasContext

Возвращает значение, указывающее, имеет ли свойство CurrentConfiguration значение null.Gets a value that indicates whether the CurrentConfiguration property is null.

(Inherited from ConfigurationElement)
Item[ConfigurationProperty] Item[ConfigurationProperty] Item[ConfigurationProperty] Item[ConfigurationProperty]

Возвращает или задает свойство или атрибут данного элемента конфигурации.Gets or sets a property or attribute of this configuration element.

(Inherited from ConfigurationElement)
Item[String] Item[String] Item[String] Item[String]

Получает или задает свойство, атрибут или дочерний элемент данного элемента конфигурации.Gets or sets a property, attribute, or child element of this configuration element.

(Inherited from ConfigurationElement)
LockAllAttributesExcept LockAllAttributesExcept LockAllAttributesExcept LockAllAttributesExcept

Возвращает коллекцию заблокированных атрибутов.Gets the collection of locked attributes.

(Inherited from ConfigurationElement)
LockAllElementsExcept LockAllElementsExcept LockAllElementsExcept LockAllElementsExcept

Возвращает коллекцию заблокированных элементов.Gets the collection of locked elements.

(Inherited from ConfigurationElement)
LockAttributes LockAttributes LockAttributes LockAttributes

Возвращает коллекцию заблокированных атрибутовGets the collection of locked attributes

(Inherited from ConfigurationElement)
LockElements LockElements LockElements LockElements

Возвращает коллекцию заблокированных элементов.Gets the collection of locked elements.

(Inherited from ConfigurationElement)
LockItem LockItem LockItem LockItem

Возвращает или задает значение, указывающее, заблокирован ли элемент.Gets or sets a value indicating whether the element is locked.

(Inherited from ConfigurationElement)
Properties Properties Properties Properties

Возвращает коллекцию свойств.Gets the collection of properties.

(Inherited from ConfigurationElement)
SectionInformation SectionInformation SectionInformation SectionInformation

Возвращает объект SectionInformation, содержащий неизменяемую информацию и функциональность объекта ConfigurationSection.Gets a SectionInformation object that contains the non-customizable information and functionality of the ConfigurationSection object.

(Inherited from ConfigurationSection)
Settings Settings Settings Settings

Возвращает коллекцию пар "ключ-значение", содержащую параметры приложения.Gets a collection of key/value pairs that contains application settings.

Методы

DeserializeElement(XmlReader, Boolean) DeserializeElement(XmlReader, Boolean) DeserializeElement(XmlReader, Boolean) DeserializeElement(XmlReader, Boolean)

Считывает XML из файла конфигурации.Reads XML from the configuration file.

(Inherited from ConfigurationElement)
DeserializeSection(XmlReader) DeserializeSection(XmlReader) DeserializeSection(XmlReader) DeserializeSection(XmlReader)

Считывает XML из файла конфигурации.Reads XML from the configuration file.

(Inherited from ConfigurationSection)
Equals(Object) Equals(Object) Equals(Object) Equals(Object)

Сравнивает текущий экземпляр ConfigurationElement с указанным объектом.Compares the current ConfigurationElement instance to the specified object.

(Inherited from ConfigurationElement)
GetHashCode() GetHashCode() GetHashCode() GetHashCode()

Получает уникальное значение, представляющее текущий экземпляр ConfigurationElement.Gets a unique value representing the current ConfigurationElement instance.

(Inherited from ConfigurationElement)
GetRuntimeObject() GetRuntimeObject() GetRuntimeObject() GetRuntimeObject()

Возвращает пользовательский объект при переопределении в производном классе.Returns a custom object when overridden in a derived class.

(Inherited from ConfigurationSection)
GetTransformedAssemblyString(String) GetTransformedAssemblyString(String) GetTransformedAssemblyString(String) GetTransformedAssemblyString(String)

Возвращает преобразованную версию указанного имени сборки.Returns the transformed version of the specified assembly name.

(Inherited from ConfigurationElement)
GetTransformedTypeString(String) GetTransformedTypeString(String) GetTransformedTypeString(String) GetTransformedTypeString(String)

Возвращает преобразованную версию указанного имени типа.Returns the transformed version of the specified type name.

(Inherited from ConfigurationElement)
GetType() GetType() GetType() GetType()

Возвращает объект Type для текущего экземпляра.Gets the Type of the current instance.

(Inherited from Object)
Init() Init() Init() Init()

Задает объект ConfigurationElement в исходное состояние.Sets the ConfigurationElement object to its initial state.

(Inherited from ConfigurationElement)
InitializeDefault() InitializeDefault() InitializeDefault() InitializeDefault()

Используется для инициализации набора значений по умолчанию для объекта ConfigurationElement.Used to initialize a default set of values for the ConfigurationElement object.

(Inherited from ConfigurationElement)
IsModified() IsModified() IsModified() IsModified()

При реализации в производном классе указывает, был ли изменен данный элемент конфигурации с момента последнего сохранения или загрузки.Indicates whether this configuration element has been modified since it was last saved or loaded when implemented in a derived class.

(Inherited from ConfigurationSection)
IsReadOnly() IsReadOnly() IsReadOnly() IsReadOnly()

Получает значение, показывающее, является ли объект ConfigurationElement доступным только для чтения.Gets a value indicating whether the ConfigurationElement object is read-only.

(Inherited from ConfigurationElement)
ListErrors(IList) ListErrors(IList) ListErrors(IList) ListErrors(IList)

Добавляет ошибку "недействительное свойство" в данном объекте ConfigurationElement и всех его дочерних элементах к переданному списку.Adds the invalid-property errors in this ConfigurationElement object, and in all subelements, to the passed list.

(Inherited from ConfigurationElement)
MemberwiseClone() MemberwiseClone() MemberwiseClone() MemberwiseClone()

Создает неполную копию текущего объекта Object.Creates a shallow copy of the current Object.

(Inherited from Object)
OnDeserializeUnrecognizedAttribute(String, String) OnDeserializeUnrecognizedAttribute(String, String) OnDeserializeUnrecognizedAttribute(String, String) OnDeserializeUnrecognizedAttribute(String, String)

Возвращает значение, указывающее, встретился ли неизвестный атрибут при десериализации.Gets a value indicating whether an unknown attribute is encountered during deserialization.

(Inherited from ConfigurationElement)
OnDeserializeUnrecognizedElement(String, XmlReader) OnDeserializeUnrecognizedElement(String, XmlReader) OnDeserializeUnrecognizedElement(String, XmlReader) OnDeserializeUnrecognizedElement(String, XmlReader)

Возвращает значение, указывающее, встретился ли неизвестный элемент при десериализации.Gets a value indicating whether an unknown element is encountered during deserialization.

(Inherited from ConfigurationElement)
OnRequiredPropertyNotFound(String) OnRequiredPropertyNotFound(String) OnRequiredPropertyNotFound(String) OnRequiredPropertyNotFound(String)

Выдает исключение, если требуемое свойство не найдено.Throws an exception when a required property is not found.

(Inherited from ConfigurationElement)
PostDeserialize() PostDeserialize() PostDeserialize() PostDeserialize()

Вызывается после десериализации.Called after deserialization.

(Inherited from ConfigurationElement)
PreSerialize(XmlWriter) PreSerialize(XmlWriter) PreSerialize(XmlWriter) PreSerialize(XmlWriter)

Вызывается до сериализации.Called before serialization.

(Inherited from ConfigurationElement)
Reset(ConfigurationElement) Reset(ConfigurationElement) Reset(ConfigurationElement) Reset(ConfigurationElement)

Восстанавливает внутреннее состояние объекта ConfigurationElement, включая блокировки и коллекции свойств.Resets the internal state of the ConfigurationElement object, including the locks and the properties collections.

(Inherited from ConfigurationElement)
ResetModified() ResetModified() ResetModified() ResetModified()

Переустанавливает значение метода IsModified() в false при реализации в производном классе.Resets the value of the IsModified() method to false when implemented in a derived class.

(Inherited from ConfigurationSection)
SerializeElement(XmlWriter, Boolean) SerializeElement(XmlWriter, Boolean) SerializeElement(XmlWriter, Boolean) SerializeElement(XmlWriter, Boolean)

Записывает содержание данного элемента конфигурации в файл конфигурации при реализации в производном классе.Writes the contents of this configuration element to the configuration file when implemented in a derived class.

(Inherited from ConfigurationElement)
SerializeSection(ConfigurationElement, String, ConfigurationSaveMode) SerializeSection(ConfigurationElement, String, ConfigurationSaveMode) SerializeSection(ConfigurationElement, String, ConfigurationSaveMode) SerializeSection(ConfigurationElement, String, ConfigurationSaveMode)

Создает XML-строку, содержащую разъединенное представление об объекте ConfigurationSection, как об отдельном разделе, записываемым в файл.Creates an XML string containing an unmerged view of the ConfigurationSection object as a single section to write to a file.

(Inherited from ConfigurationSection)
SerializeToXmlElement(XmlWriter, String) SerializeToXmlElement(XmlWriter, String) SerializeToXmlElement(XmlWriter, String) SerializeToXmlElement(XmlWriter, String)

Записывает внешние теги данного элемента конфигурации в файл конфигурации при реализации в производном классе.Writes the outer tags of this configuration element to the configuration file when implemented in a derived class.

(Inherited from ConfigurationElement)
SetPropertyValue(ConfigurationProperty, Object, Boolean) SetPropertyValue(ConfigurationProperty, Object, Boolean) SetPropertyValue(ConfigurationProperty, Object, Boolean) SetPropertyValue(ConfigurationProperty, Object, Boolean)

Задает для свойства указанное значение.Sets a property to the specified value.

(Inherited from ConfigurationElement)
SetReadOnly() SetReadOnly() SetReadOnly() SetReadOnly()

Задает свойство IsReadOnly() для объекта ConfigurationElement и всех подчиненных элементов.Sets the IsReadOnly() property for the ConfigurationElement object and all subelements.

(Inherited from ConfigurationElement)
ShouldSerializeElementInTargetVersion(ConfigurationElement, String, FrameworkName) ShouldSerializeElementInTargetVersion(ConfigurationElement, String, FrameworkName) ShouldSerializeElementInTargetVersion(ConfigurationElement, String, FrameworkName) ShouldSerializeElementInTargetVersion(ConfigurationElement, String, FrameworkName)

Указывает, нужно ли выполнять сериализацию указанного элемента во время сериализации иерархии объекта конфигурации для заданной целевой версии .NET Framework.NET Framework.Indicates whether the specified element should be serialized when the configuration object hierarchy is serialized for the specified target version of the .NET Framework.NET Framework.

(Inherited from ConfigurationSection)
ShouldSerializePropertyInTargetVersion(ConfigurationProperty, String, FrameworkName, ConfigurationElement) ShouldSerializePropertyInTargetVersion(ConfigurationProperty, String, FrameworkName, ConfigurationElement) ShouldSerializePropertyInTargetVersion(ConfigurationProperty, String, FrameworkName, ConfigurationElement) ShouldSerializePropertyInTargetVersion(ConfigurationProperty, String, FrameworkName, ConfigurationElement)

Указывает, нужно ли выполнять сериализацию указанного свойства во время сериализации иерархии объекта конфигурации для заданной целевой версии .NET Framework.NET Framework.Indicates whether the specified property should be serialized when the configuration object hierarchy is serialized for the specified target version of the .NET Framework.NET Framework.

(Inherited from ConfigurationSection)
ShouldSerializeSectionInTargetVersion(FrameworkName) ShouldSerializeSectionInTargetVersion(FrameworkName) ShouldSerializeSectionInTargetVersion(FrameworkName) ShouldSerializeSectionInTargetVersion(FrameworkName)

Указывает, нужно ли выполнять сериализацию текущего экземпляра ConfigurationSection во время сериализации иерархии объекта конфигурации для заданной целевой версии .NET Framework.NET Framework.Indicates whether the current ConfigurationSection instance should be serialized when the configuration object hierarchy is serialized for the specified target version of the .NET Framework.NET Framework.

(Inherited from ConfigurationSection)
ToString() ToString() ToString() ToString()

Возвращает строку, представляющую текущий объект.Returns a string that represents the current object.

(Inherited from Object)
Unmerge(ConfigurationElement, ConfigurationElement, ConfigurationSaveMode) Unmerge(ConfigurationElement, ConfigurationElement, ConfigurationSaveMode) Unmerge(ConfigurationElement, ConfigurationElement, ConfigurationSaveMode) Unmerge(ConfigurationElement, ConfigurationElement, ConfigurationSaveMode)

Изменяет объект ConfigurationElement для удаления всех значений, которые не должны сохраняться.Modifies the ConfigurationElement object to remove all values that should not be saved.

(Inherited from ConfigurationElement)

Применяется к

Дополнительно