Uredi

Manage SSH for secure access to Azure Kubernetes Service (AKS) nodes

  • Članek

This article describes how to configure the SSH keys (preview) on your AKS clusters or node pools, during initial deployment or at a later time.

AKS supports the following configuration options to manage SSH keys on cluster nodes:

  • Create a cluster with SSH keys
  • Update the SSH keys on an existing AKS cluster
  • Disable and enable the SSH service

Important

AKS preview features are available on a self-service, opt-in basis. Previews are provided "as is" and "as available," and they're excluded from the service-level agreements and limited warranty. AKS previews are partially covered by customer support on a best-effort basis. As such, these features aren't meant for production use. For more information, see the following support articles:

Before you begin

  • You need aks-preview version 0.5.116 or later to use Update.
  • You need aks-preview version 1.0.0b6 or later to use Disable.
  • The Create and Update SSH feature supports Linux, Windows, and Azure Linux node pools on existing clusters.
  • The Disable SSH feature isn't supported in this preview release on node pools running the Windows Server operating system.

Install the aks-preview Azure CLI extension

  1. Install the aks-preview extension using the az extension add command.

    az extension add --name aks-preview

  2. Update to the latest version of the extension using the az extension update command.

    az extension update --name aks-preview

Register the DisableSSHPreview feature flag

To use the Disable SSH feature, perform the following steps to register and enable it in your subscription.

  1. Register the DisableSSHPreview feature flag using the az feature register command.

    az feature register --namespace "Microsoft.ContainerService" --name "DisableSSHPreview"

    It takes a few minutes for the status to show Registered.

  2. Verify the registration status using the az feature show command.

    az feature show --namespace "Microsoft.ContainerService" --name "DisableSSHPreview"

  3. When the status reflects Registered, refresh the registration of the Microsoft.ContainerService resource provider using the az provider register command.

    az provider register --namespace Microsoft.ContainerService

Create an AKS cluster with SSH keys

Use the az aks create command to deploy an AKS cluster with an SSH public key. You can either specify the key or a key file using the --ssh-key-value argument.

SSH parameter Description Default value
--generate-ssh-key If you don't have your own SSH keys, specify --generate-ssh-key. The Azure CLI automatically generates a set of SSH keys and saves them in the default directory ~/.ssh/.
--ssh-key-value Public key path or key contents to install on node VMs for SSH access. For example, ssh-rsa AAAAB...snip...UcyupgH azureuser@linuxvm. ~/.ssh/id_rsa.pub
--no-ssh-key If you don't require SSH keys, specify this argument. However, AKS automatically generates a set of SSH keys because the Azure Virtual Machine resource dependency doesn't support an empty SSH keys file. As a result, the keys aren't returned and can't be used to SSH into the node VMs. The private key is discarded and not saved.

Note

If no parameters are specified, the Azure CLI defaults to referencing the SSH keys stored in the ~/.ssh/id_rsa.pub file. If the keys aren't found, the command returns the message An RSA key file or key value must be supplied to SSH Key Value.

The following are examples of this command:

  • To create a cluster and use the default generated SSH keys:

    az aks create --name myAKSCluster --resource-group MyResourceGroup --generate-ssh-key

  • To specify an SSH public key file, include the --ssh-key-value argument:

    az aks create --name myAKSCluster --resource-group MyResourceGroup --ssh-key-value ~/.ssh/id_rsa.pub

Update SSH public key on an existing AKS cluster

Use the az aks update command to update the SSH public key (preview) on your cluster. This operation updates the key on all node pools. You can either specify a key or a key file using the --ssh-key-value argument.

Note

Updating the SSH keys is supported on Azure virtual machine scale sets with AKS clusters.

The following are examples of this command:

  • To specify a new SSH public key value, include the --ssh-key-value argument:

    az aks update --name myAKSCluster --resource-group MyResourceGroup --ssh-key-value 'ssh-rsa AAAAB3Nza-xxx'

  • To specify an SSH public key file, specify it with the --ssh-key-value argument:

    az aks update --name myAKSCluster --resource-group MyResourceGroup --ssh-key-value ~/.ssh/id_rsa.pub

Important

After you update the SSH key, AKS doesn't automatically update your node pool. At any time, you can choose to perform a nodepool update operation. The update SSH keys operation takes effect after a node image update is complete.

Disable SSH overview

To improve security and support your corporate security requirements or strategy, AKS supports disabling SSH (preview) both on the cluster and at the node pool level. Disable SSH introduces a simplified approach compared to the only supported solution, which requires configuring network security group rules on the AKS subnet/node network interface card (NIC).

When you disable SSH at cluster creation time, it takes effect after the cluster is created. However, when you disable SSH on an existing cluster or node pool, AKS doesn't automatically disable SSH. At any time, you can choose to perform a nodepool upgrade operation. The disable/enable SSH keys operation takes effect after the node image update is complete.

SSH parameter Description
disabled The SSH service is disabled.
localuser The SSH service is enabled and users with SSH keys can securely access the node.

Note

kubectl debug node continues to work after you disable SSH because it doesn't depend on the SSH service.

Disable SSH on a new cluster deployment

By default, the SSH service on AKS cluster nodes is open to all users and pods running on the cluster. You can prevent direct SSH access from any network to cluster nodes to help limit the attack vector if a container in a pod becomes compromised. Use the az aks create command to create a new cluster, and include the --ssh-access disabled argument to disable SSH (preview) on all the node pools during cluster creation.

Important

After you disable the SSH service, you can't SSH into the cluster to perform administrative tasks or to troubleshoot.

az aks create -g myResourceGroup -n myManagedCluster --ssh-access disabled

After a few minutes, the command completes and returns JSON-formatted information about the cluster. The following example resembles the output and the results related to disabling SSH:

"securityProfile": {
"sshAccess": "Disabled"
},

Disable SSH on an existing cluster

Use the az aks update command to update an existing cluster, and include the --ssh-access disabled argument to disable SSH (preview) on all the node pools in the cluster.

az aks update -g myResourceGroup -n myManagedCluster --ssh-access disabled

After a few minutes, the command completes and returns JSON-formatted information about the cluster. The following example resembles the output and the results related to disabling SSH:

"securityProfile": {
"sshAccess": "Disabled"
},

For the change to take effect, you need to reimage all node pools by using the az aks nodepool upgrade command.

az aks nodepool upgrade --cluster-name myManagedCluster --name mynodepool --resource-group myResourceGroup --node-image-only

Important

During this operation, all Virtual Machine Scale Set instances are upgraded and reimaged to use the new SSH configuration.

Disable SSH for a new node pool

Use the az aks nodepool add command to add a node pool, and include the --ssh-access disabled argument to disable SSH during node pool creation.

az aks nodepool add --cluster-name myManagedCluster --name mynodepool --resource-group myResourceGroup --ssh-access disabled

After a few minutes, the command completes and returns JSON-formatted information about the cluster indicating mynodepool was successfully created. The following example resembles the output and the results related to disabling SSH:

"securityProfile": {
"sshAccess": "Disabled"
},

Disable SSH for an existing node pool

Use the [az aks nodepool update][az-aks-nodepool-update] command with the --ssh-access disabled` argument to disable SSH (preview) on an existing node pool.

az aks nodepool update --cluster-name myManagedCluster --name mynodepool --resource-group myResourceGroup --ssh-access disabled

After a few minutes, the command completes and returns JSON-formatted information about the cluster indicating mynodepool was successfully created. The following example resembles the output and the results related to disabling SSH:

"securityProfile": {
"sshAccess": "Disabled"
},

For the change to take effect, you need to reimage the node pool by using the az aks nodepool upgrade command.

az aks nodepool upgrade --cluster-name myManagedCluster --name mynodepool --resource-group myResourceGroup --node-image-only

Re-enable SSH on an existing cluster

Use the az aks update command to update an existing cluster, and include the --ssh-access localuser argument to re-enable SSH (preview) on all the node pools in the cluster.

az aks update -g myResourceGroup -n myManagedCluster --ssh-access localuser

The following message is returned while the process is performed:

Only after all the nodes are reimaged, does the disable/enable SSH Access operation take effect."

After re-enabling SSH, the nodes won't be reimaged automatically. At any time, you can choose to perform a reimage operation.

Important

During this operation, all Virtual Machine Scale Set instances are upgraded and reimaged to use the new SSH public key.

Re-enable SSH for a specific node pool

Use the az aks update command to update a specific node pool, and include the --ssh-access localuser argument to re-enable SSH (preview) on that node pool in the cluster. In the following example, nodepool1 is the target node pool.

az aks nodepool update --cluster-name myManagedCluster --name nodepool1 --resource-group myResourceGroup --ssh-access localuser

The following message is returned when the process is performed:

Only after all the nodes are reimaged, does the disable/enable SSH Access operation take effect.

Important

During this operation, all Virtual Machine Scale Set instances are upgraded and reimaged to use the new SSH public key.

SSH service status

Perform the following steps to use node-shell onto one node and inspect SSH service status using systemctl.

  1. Get standard bash shell by running the command kubectl node-shell <node> command.

    kubectl node-shell aks-nodepool1-20785627-vmss000001

  2. Run the systemctl command to check the status of the SSH service.

    systemctl status ssh

If SSH is disabled, the following sample output shows the results:

ssh.service - OpenBSD Secure Shell server
     Loaded: loaded (/lib/systemd/system/ssh.service; disabled; vendor preset: enabled)
     Active: inactive (dead) since Wed 2024-01-03 15:36:57 UTC; 20min ago

If SSH is enabled, the following sample output shows the results:

ssh.service - OpenBSD Secure Shell server
     Loaded: loaded (/lib/systemd/system/ssh.service; enabled; vendor preset: enabled)
     Active: active (running) since Wed 2024-01-03 15:40:20 UTC; 19min ago

Next steps

To help troubleshoot any issues with SSH connectivity to your clusters nodes, you can view the kubelet logs or view the Kubernetes master node logs.