Redigera

Dela via


MSSQLSERVER_18456

Applies to: SQL Server

Details

Attribute Value
Product Name SQL Server
Event ID 18456
Event Source MSSQLSERVER
Component SQLEngine
Symbolic Name LOGON_FAILED
Message Text Login failed for user '%.*ls'.%.*ls

Explanation

You get this error message when a connection attempt is rejected because of an authentication failure. User logins can fail for many reasons, such as invalid credentials, password expiration, and enabling the wrong authentication mode. In many cases, error codes include descriptions.

User action

The following examples are some of the common login failures. Select the exact error that you're experiencing to troubleshoot the issue:

Login failed for user '<username>' or login failed for user '<domain>\<username>'

If the domain name isn't specified, the problem is a failing SQL Server login attempt. If the domain name is specified, the problem is a failing Windows user account login. For potential causes and suggested resolutions, see:

Potential cause Suggested resolution
You're trying to use SQL Server Authentication, but the SQL Server instance is configured for Windows Authentication mode. Verify that SQL Server is configured to use SQL Server and Windows Authentication mode. You can review and change the authentication mode for your SQL Server instance on the Security page under Properties for the corresponding instance in SQL Server Management Studio (SSMS). For more information, see Change server authentication mode. Alternatively, you can change your application to use Windows Authentication mode to connect to SQL Server.
Note: You can see a message like the following one in the SQL Server Error log for this scenario:
Login failed for user '<UserName>'. Reason: An attempt to login using SQL authentication failed. Server is configured for Windows authentication only.
You are trying to access SQL Server through a group and you see an error message. If you don't have the necessary permissions to access the server, the provider shows the "Login failed for user 'contoso/user1'" error message. Use the "Access via group" feature that helps you access a server based on your group membership.
When you run the xp_logininfo 'contoso/user1' stored procedure, the following might occur:
- If you see an error, SQL Server can't resolve the user name at all. It's likely that a name isn't present in the Active Directory (AD) or there might be issues connecting to the domain controller (DC). Try with another name to check if the issue is specific to a specific account.
- If you're connecting to a cross-domain server, the group must be in the SQL Server domain, and not the user domain, so that its membership can be resolved.
- When a database query returns no rows, it means that there's no group that provides access to the server. When a query returns one or more rows, it means that the user belongs to a group that provides access.
The DBA can double-check the permissions by checking the Security\Logins folder in SQL Server Management Studio (SSMS). The Security\Logins displays a list of created logins. If it's a contained database, the DBA can check the Security\Logins under the database name to check and manage the logins.
For more information, see Configure User Access Control and Permissions.
SQL logins are not enabled The database management system (DBMS) might show some variation of the Login failed for user '<username>' message. To resolve this error, follow these steps:
1. Check if the SQL Server error log contains the error message "Login failed for user '<username>'. Reason: An attempt to log in using SQL authentication failed. Server is configured for Windows authentication only."
2. Use one of the following methods to resolve the error:
- Use an integrated login. For example, for OLE DB Providers, add INTEGRATED SECURITY=SSPI to the connection string, and for ODBC drivers, add TRUSTED_CONNECTION=YES. The .NET provider accepts either syntax.
Note: This might lead to other issues if they aren't configured correctly to allow integrated authentication, and need investigating as a separate issue.
- Enable SQL logins on the server:
a. In SQL Server Management Studio, right-click on the SQL Server name in Object Explorer and select Properties.
b. In the Security pane, select the SQL Server and Windows Authentication mode.
c. Select OK.
d. Restart SQL Server for the change to take place.
Note: This might lead to other issues, such as defining a SQL login.
- Try to specify a local Windows account or a domain account for the username. Only SQL logins are allowed. The application should be using integrated security.
Login doesn't exist on the SQL Server instance you're trying to connect to. Verify that the SQL Server login exists and that you've spelled it properly. If the login doesn't exist, create it. If it's present but misspelled, correct that in the application connection string. The SQL Server Errorlog will have one of the following messages:
- Login failed for user 'username'. Reason: Could not find a login matching the name provided.
- Login failed for user 'Domain\username'. Reason: Could not find a login matching the name provided.This can be a common issue if you deploy an application that uses a DEV or QA server into production and you fail to update the connection string. To resolve this issue, validate that you are connecting to the appropriate server. If not, correct the connection string. If it is, grant the login access to your SQL Server. Or if it's a Windows login grant access directly or add it to a local or domain group that is allowed to connect to the database server. For more information, see Create a Login.
You're using SQL Server Authentication, but the password you specified for SQL Server login is incorrect. Check the SQL error log for messages like "Reason: Password did not match that for the login provided" to confirm the cause. To fix the issue, use the correct password in your application or use a different account if you can't remember the password. Alternatively, work with your SQL Server administrator to reset the password for the account.
If the application is SQL Server Integration Services (SSIS), there may be multiple levels of a Configuration file for the job, which may override the Connection Manager settings for the package.
If the application was written by your company and the connection string is programmatically generated, engage the development team to resolve the issue. As a temporary workaround, hard-code the connection string and test. Use a UDL file or a script to prove a connection is possible with a hard-coded connection string.
The connection string has incorrect syntax, server name, or user credentials. To resolve this, follow these steps:
  1. Check the connection string format. A connection string format must contain the required parameters, such as server name, database name, user name, and password.
  2. Check the server name in the connection string.
  3. If you're using a named instance, include the instance name.
  4. If the targeted server is incorrect, update the connection string to point to the correct server.
  5. If the connection string is correct, provide the login access to the database. To do this, create a user in the database, and then map to that login.
  6. If you're using a Windows login, add the login to a local group or domain group that's allowed to connect to the database server.
No login Check if SQL Server shows the following messages:
Logon Error: 18456, Severity: 14, State: 11.
Logon Login failed for user 'CONTOSO\JohnDoe'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: ]
Some of the errors belong to the Anonymous Logon account. This is related to the Kerberos issue. There was a bad manual entry in the HOSTS file, that is, the wrong server name was given.
The remaining issues might fall into the following categories:
  • Logins were denied (or not granted) for an end user.
  • The account had access through the Administrators group.
  • A group that the user belonged to, had DENY permissions in SQL Server.
You're trying to connect using Windows authentication but are logged into an incorrect domain. Verify that you're properly logged into the correct domain. The error message usually displays the domain name.
Check database permissions The database doesn't appear offline in SQL Server Management Studio. Other users, for example the DBA is able to connect to it.
The user account in question must be granted explicit access to the database or be added to a SQL Server role or a local Windows group or domain group that has access to the database. For more information, see CREATE USER, ALTER ROLE, and ALTER SERVER ROLE
You aren't running your application (for example, SSMS) as an administrator. If you're trying to connect using your administrator credentials, start your application by using the Run as Administrator option. When connected, add your Windows user as an individual login.
Login is deleted after a migration to a contained database user. If the Database Engine supports contained databases, confirm that the login wasn't deleted after migration to a contained database user. For more information, see Contained Database Authentication: Introduction.
Login's default database is offline or otherwise not available. Check with your SQL Server administrator and resolve issues related to database availability. If the login has permissions to other databases on the server and you don't need to access the currently configured default database in your application, use one of the following options:
- Request the administrator to change the default database for the login using ALTER LOGIN statement or SSMS.
- Explicitly specify a different database in your application connection string. Or if you're using SSMS switch to the Connection Properties tab to specify a database that is currently available.Applications like SSMS may show an error message like the following one:
Cannot open user default database. Login failed.
Login failed for user <user name>. (Microsoft SQL Server, Error: 4064)
SQL Server Errorlog will have an error message like the following one:
Login failed for user '<user name>'. Reason: Failed to open the database '<dbname>' specified in the login properties [CLIENT: <ip address>]
For more information, see MSSQLSERVER_4064.
The database explicitly specified in the connection string or in SSMS is incorrectly spelled, offline, or otherwise not available. - Fix the database name in the connection string. Pay attention to case sensitivity if using a case sensitive collation on the server.
- If the database name is correct, check with your SQL Server administrator and resolve issues related to database availability. Check if the database is offline, not recovered, and so on.
- If the login has been mapped to users with permissions to other databases on the server and you don't need to access the currently configured database in your application, then specify a different database in your connection string. Or if you're connecting with SSMS, use the Connection Properties tab to specify a database that is currently available.
SQL Server Errorlog will have an error message like the following one:
Login failed for user <UserName>. Reason: Failed to open the explicitly specified database 'dbname'. [CLIENT: <ip address>]
Note: If the login's default database is available, SQL Server allows the connection to succeed. For more information, see MSSQLSERVER_4064.
The user doesn't have permissions to the requested database. - Try connecting as another user that has sysadmin rights to see if connectivity can be established.
- Grant the login access to the database by creating the corresponding user (for example, CREATE USER [<UserName>] FOR LOGIN [UserName])

Also, check the extensive list of error codes at Troubleshooting Error 18456.

For more troubleshooting help, see Troubleshooting SQL Client / Server Connectivity Issues.

Login failed for user NT AUTHORITY\ANONYMOUS LOGON

There are at least four scenarios for this issue. In the following table, examine each applicable potential cause, and use the appropriate resolution: See the note below the table for an explanation of the term double hop.

Potential causes Suggested resolutions
You're trying to pass NT LAN Manager (NTLM) credentials from one service to another service on the same computer (for example: from IIS to SQL Server), but a failure occurs in the process. Add the DisableLoopbackCheck or BackConnectionHostNames registry entries.
There are double-hop (constraint delegation) scenarios across multiple computers. The error could occur if the Kerberos connection fails because of Service Principal Names (SPN) issues. Run SQLCheck on each SQL Server and the web server. Use the troubleshooting guides: 0600 Credential Delegation Issue and 0650 SQL Server Linked Server Delegation Issues.
If no double-hop (constraint delegation) is involved, then likely duplicate SPNs exist, and the client is running as a LocalSystem or another machine account that gets NTLM credentials instead of Kerberos credentials. Use SQLCheck or Setspn.exe to diagnose and fix any SPN-related issues. Also review Overview of the Kerberos Configuration Manager for SQL Server.
Windows Local Security policy may have been configured to prevent the use of the machine account for remote authentication requests. Navigate to Local Security Policy > Local Policies > Security Options > Network security: Allow Local System to use computer identity for NTLM, select the Enabled option if the setting is disabled, and then select OK.
Note: As detailed on the Explain tab, this policy is enabled in Windows 7 and later versions by default.
Intermittent occurrence of this issue when using constrained delegation can indicate presence of an expired ticket that can't be renewed by middle tier. This is an expected behavior with either linked server scenario or any application that is holding a logon session for more than 10 hours. Change delegation settings on your middle-tier server from Trust this computer for delegation to specified services only - Use Kerberos Only to Trust this computer for delegation to specified services only - Use any protocol. For more information, see Intermittent ANONYMOUS LOGON of SQL Server linked server double hop.
NTLM Peer Login This error is related to the NTLM authentication protocol used by Microsoft Windows OS. When communicating between computers that are either in workstations or in domains that don't trust each other, you can set up identical accounts on both machines and use NTLM peer authentication NTLM Peer Login. Logins only work if both the user account and the password match on both machines.
Loopback protection Loopback protection is designed to prohibit applications from calling other services on the same machine. You can either set the DisableLoopbackCheck or BackConnectionHostNames (preferred) registry keys to allow this. For more information, see Error message when you try to access a server locally by using its FQDN or its CNAME alias after you install Windows Server 2003 Service Pack 1: Access denied or No network provider accepted the given network path.
Always-On Listener Loopback Protection When connecting to the Always-On Listener from the primary node, the connection will be NTLM. This will engage the Loopback Check and result in a "Login failed" error stating that the user is from an untrusted domain. To resolve this error, type the Listener NETBIOS name and fully qualified name into the BackConnectionHostNames registry key on all machines in the Availability Group. For more information, see Error message when you try to access a server locally by using its FQDN or its CNAME alias after you install Windows Server 2003 Service Pack 1: Access denied or No network provider accepted the given network path.
LANMAN Compatibility Level This usually happens between older computers (pre Windows 2008) and newer computers.
Set the LANMAN compatibility level to 5 on all computers. This also disallows NTLM v1. You can also switch to Kerberos to avoid this issue.
Sensitive account Some accounts may be marked as Sensitive in Active Directory. These accounts can't be delegated to another service in a double-hop scenario.
Not a constrained target If constrained delegation is enabled for a particular service account, Kerberos will fail if the target server's SPN is not on the list of targets of constrained delegation.
Per-Service-SID This feature limits local connections to use NTLM and not Kerberos as the authentication method. The service can make a single hop to another server using NTLM credentials, but it can't be delegated further without the use of constrained delegation.
NTLM and constrained delegation If the target is a file share, the delegation type of the mid-tier service account must be Constrained-Any and not Constrained-Kerberos.

Note

A double-hop typically involves delegation of user credentials across multiple remote computers. For example, assume you have a SQL Server instance named SQL1 where you created a linked server for a remote SQL Server named SQL2. In linked server security configuration, you selected the option Be made using the login's current security context. When using this configuration, if you execute a linked server query on SQL1 from a remote client computer named Client1, the Windows credentials will first have to hop from Client1 to SQL1 and then from SQL1 to SQL2 (hence, it's called a double-hop). For more information, see Understanding Kerberos Double Hop and Kerberos Constrained Delegation Overview

Login failed for user (empty)

This error occurs when a user tries unsuccessfully to log in. This error might occur if your computer isn't connected to the network. For example, you may receive an error message that resembles the following one:

Source: NETLOGON
Date: 8/12/2012 8:22:16 PM
Event ID: 5719
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: <computer name>
Description: This computer was not able to set up a secure session with a domain controller in domain due to the following: The remote procedure call was cancelled.
This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator.

An empty string means that SQL Server tried to hand off the credentials to the Local Security Authority Subsystem Service (LSASS) but couldn't because of some problem. Either LSASS wasn't available, or the domain controller couldn't be contacted.

You might also see the following corresponding SSPI error codes:

SSPI handshake failed with error code 0x80090311 while establishing a connection with integrated security; the connection has been closed.

SSPI handshake failed with error code 0x80090304 while establishing a connection with integrated security; the connection has been closed.

These error codes translate as following:

Error -2146893039 (0x80090311): No authority could be contacted for authentication. Error -2146893052 (0x80090304): The Local Security Authority cannot be contacted.

To resolve these errors, you can take the offending DC offline or use NLTEST.EXE to switch DCs. - To query the DC, run the NLTEST /SC_QUERY:CONTOSO command. - To change the DC, run the NLTEST /SC_RESET:CONTOSO\DC03 command.

If you need further assistance, contact the Microsoft Active Directory team.

Check the event logs on the client and the server for any network-related or Active Directory-related messages that were logged around the time of the failure. If you find any, work with your domain administrator to fix the issues.

Login failed for user '(null)'

An indication of "null" could mean that LSASS can't decrypt the security token by using the SQL Server service account credentials. The main reason for this condition is that the SPN is associated with the wrong account.

To fix the issue, follow these steps:

  1. Use the SQLCheck or Setspn.exe to diagnose and fix SPN-related issues.

  2. Use SQLCheck to check whether the SQL Service account is trusted for delegation. If the output indicates that the account isn't trusted for delegation, work with your Active Directory administrator to enable delegation for the account.

Note

The SETSPN -X and -Q are useful commands to check for duplicate or misplaced SPNs.

  1. Diagnose and fix Domain Name System (DNS) name resolution issues. For example:

    • Ping IP address by using PowerShell scripts:

      • ping -a <your_target_machine> (use -4 for IPv4 and -6 IPv6 specifically)
      • ping -a <your_remote_IPAddress>
    • Use NSLookup to enter your local and remote computer name and IP address multiple times.

  2. Look for any discrepancies and mismatches in the returned results. The accuracy of the DNS configuration on the network is important for a successful SQL Server connection. An incorrect DNS entry could cause numerous connectivity issues later.

  3. Make sure that firewalls or other network devices don't block a client from connecting to the domain controller. SPNs are stored in Active Directory. If the clients can't communicate with the directory, the connection can't succeed.

Additional error information

To increase security, the error message that is returned to the client deliberately hides the nature of the authentication error. However, in the SQL Server error log, a corresponding error contains an error state that maps to an authentication failure condition. Compare the error state to the following list to determine the reason for the login failure.

State Description
1 Error information isn't available. This state usually means you don't have permission to receive the error details. Contact your SQL Server administrator for more information.
2 User ID isn't valid.
5 User ID isn't valid.
6 An attempt was made to use a Windows login name with SQL Server Authentication.
7 Login is disabled, and the password is incorrect.
8 The password is incorrect.
9 Password isn't valid.
11 Login is valid, but server access failed. One possible cause of this error is when the Windows user has access to SQL Server as a member of the local administrators' group, but Windows isn't providing administrator credentials. To connect, start the connecting program using the Run as administrator option, and then add the Windows user to SQL Server as a specific login.
12 Login is valid login, but server access failed.
18 Password must be changed.
38, 46 Couldn't find database requested by user.
58 When SQL Server is set to use Windows Authentication only, and a client attempts to log in using SQL authentication. Another cause is when SIDs don't match.
102 - 111 Azure AD failure.
122 - 124 Failure due to empty user name or password.
126 Database requested by user doesn't exist.
132 - 133 Azure AD failure.

Other error states exist and signify an unexpected internal processing error.

More rare possible cause

The error reason An attempt to login using SQL authentication failed. Server is configured for Windows authentication only. can be returned in the following situations.

  • When the server is configured for mixed mode authentication, and an ODBC connection uses the TCP protocol, and the connection doesn't explicitly specify that the connection should use a trusted connection.

  • When SQL Server is configured for mixed mode authentication, and an ODBC connection uses named pipes, and the credentials the client used to open the named pipe are used to automatically impersonate the user, and the connection string doesn't explicitly specify the use of a trusted authentication.

To resolve this issue, include TRUSTED_CONNECTION = TRUE in the connection string.

Examples

In this example, the authentication error state is 8. This indicates that the password is incorrect.

Date Source Message
2007-12-05 20:12:56.34 Logon Error: 18456, Severity: 14, State: 8.
2007-12-05 20:12:56.34 Logon Login failed for user '<user_name>'. [CLIENT: <ip address>]

Note

When SQL Server is installed using Windows Authentication mode and is later changed to SQL Server and Windows Authentication mode, the sa login is initially disabled. This causes the state 7 error: "Login failed for user 'sa'." To enable the sa login, see Change Server Authentication Mode.

See also