Aracılığıyla paylaş


ConfigurationManager.OpenExeConfiguration Yöntem

Tanım

Belirtilen istemci yapılandırma dosyasını nesne Configuration olarak açar.

Aşırı Yüklemeler

OpenExeConfiguration(ConfigurationUserLevel)

Geçerli uygulamanın yapılandırma dosyasını nesne Configuration olarak açar.

OpenExeConfiguration(String)

Belirtilen istemci yapılandırma dosyasını nesne Configuration olarak açar.

OpenExeConfiguration(ConfigurationUserLevel)

Kaynak:
ConfigurationManager.cs
Kaynak:
ConfigurationManager.cs
Kaynak:
ConfigurationManager.cs

Geçerli uygulamanın yapılandırma dosyasını nesne Configuration olarak açar.

public:
 static System::Configuration::Configuration ^ OpenExeConfiguration(System::Configuration::ConfigurationUserLevel userLevel);
public static System.Configuration.Configuration OpenExeConfiguration (System.Configuration.ConfigurationUserLevel userLevel);
static member OpenExeConfiguration : System.Configuration.ConfigurationUserLevel -> System.Configuration.Configuration
Public Shared Function OpenExeConfiguration (userLevel As ConfigurationUserLevel) As Configuration

Parametreler

userLevel
ConfigurationUserLevel

Yapılandırmayı açmakta olduğunuz kullanıcı düzeyini belirten numaralandırma değerlerinden biri.

Döndürülenler

Geçerli uygulamanın yapılandırma dosyası.

Özel durumlar

Yapılandırma dosyası yüklenemedi.

Örnekler

Aşağıdaki kod örneğinde yönteminin nasıl kullanılacağı gösterilmektedir OpenExeConfiguration .

// Get the roaming configuration file associated 
// with the application.
// This function uses the OpenExeConfiguration(
// ConfigurationUserLevel userLevel) method to 
// get the configuration file.
// It also creates a custom ConsoleSection and 
// sets its ConsoleElement BackgroundColor and
// ForegroundColor properties to blue and yellow
// respectively. Then it uses these properties to
// set the console colors.  
public static void GetRoamingConfiguration()
{
  // Define the custom section to add to the
  // configuration file.
  string sectionName = "consoleSection";
  ConsoleSection currentSection = null;
  
  // Get the roaming configuration 
  // that applies to the current user.
  Configuration roamingConfig =
    ConfigurationManager.OpenExeConfiguration(
     ConfigurationUserLevel.PerUserRoaming);

  // Map the roaming configuration file. This
  // enables the application to access 
  // the configuration file using the
  // System.Configuration.Configuration class
  ExeConfigurationFileMap configFileMap =
    new ExeConfigurationFileMap();
  configFileMap.ExeConfigFilename = 
    roamingConfig.FilePath;

  // Get the mapped configuration file.
  Configuration config =
    ConfigurationManager.OpenMappedExeConfiguration(
      configFileMap, ConfigurationUserLevel.None);
  
  try
    {
      currentSection =
           (ConsoleSection)config.GetSection(
             sectionName);

      // Synchronize the application configuration
      // if needed. The following two steps seem
      // to solve some out of synch issues 
      // between roaming and default
      // configuration.
      config.Save(ConfigurationSaveMode.Modified);

      // Force a reload of the changed section, 
      // if needed. This makes the new values available 
      // for reading.
      ConfigurationManager.RefreshSection(sectionName);

      if (currentSection == null)
      {
        // Create a custom configuration section.
        currentSection = new ConsoleSection();

        // Define where in the configuration file 
        // hierarchy the associated 
        // configuration section can be declared.
        // The following assignment assures that 
        // the configuration information can be 
        // defined in the user.config file in the 
        // roaming user directory. 
        currentSection.SectionInformation.AllowExeDefinition =
          ConfigurationAllowExeDefinition.MachineToLocalUser;

        // Allow the configuration section to be 
        // overridden by lower-level configuration files.
        // This means that lower-level files can contain
        // the section (use the same name) and assign 
        // different values to it as done by the
        // function GetApplicationConfiguration() in this
        // example.
        currentSection.SectionInformation.AllowOverride =
          true;

        // Store console settings for roaming users.
        currentSection.ConsoleElement.BackgroundColor =
            ConsoleColor.Blue;
        currentSection.ConsoleElement.ForegroundColor =
            ConsoleColor.Yellow;

        // Add configuration information to 
        // the configuration file.
        config.Sections.Add(sectionName, currentSection);
        config.Save(ConfigurationSaveMode.Modified);
        // Force a reload of the changed section. This 
        // makes the new values available for reading.
        ConfigurationManager.RefreshSection(
          sectionName);
      }
  }
  catch (ConfigurationErrorsException e)
  {
      Console.WriteLine("[Exception error: {0}]",
          e.ToString());
  }

  // Set console properties using values
  // stored in the configuration file.
  Console.BackgroundColor =
    currentSection.ConsoleElement.BackgroundColor;
  Console.ForegroundColor =
    currentSection.ConsoleElement.ForegroundColor;
  // Apply the changes.
  Console.Clear();

  // Display feedback.
  Console.WriteLine();
  Console.WriteLine(
    "Using OpenExeConfiguration(ConfigurationUserLevel).");
  Console.WriteLine(
      "Configuration file is: {0}", config.FilePath);
}
    ' Get the roaming configuration file associated 
    ' with the application.
    ' This function uses the OpenExeConfiguration(
    ' ConfigurationUserLevel userLevel) method to 
    ' get the configuration file.
    ' It also creates a custom ConsoleSection and 
' sets its ConsoleElement BackgroundColor and
    ' ForegroundColor properties to blue and yellow
    ' respectively. Then it uses these properties to
    ' set the console colors.  
    Public Shared Sub GetRoamingConfiguration()
        ' Define the custom section to add to the
        ' configuration file.
        Dim sectionName As String = "consoleSection"
        Dim currentSection As ConsoleSection = Nothing

        ' Get the roaming configuration 
        ' that applies to the current user.
        Dim roamingConfig As Configuration = _
        ConfigurationManager.OpenExeConfiguration( _
            ConfigurationUserLevel.PerUserRoaming)

        ' Map the roaming configuration file. This
        ' enables the application to access 
        ' the configuration file using the
        ' System.Configuration.Configuration class
        Dim configFileMap As New ExeConfigurationFileMap()
        configFileMap.ExeConfigFilename = _
            roamingConfig.FilePath

        ' Get the mapped configuration file.
        Dim config As Configuration = _
            ConfigurationManager.OpenMappedExeConfiguration( _
                configFileMap, ConfigurationUserLevel.None)

        Try
            currentSection = DirectCast( _
                config.GetSection(sectionName),  _
                ConsoleSection)

            ' Synchronize the application configuration
            ' if needed. The following two steps seem
            ' to solve some out of synch issues 
            ' between roaming and default
            ' configuration.
            config.Save(ConfigurationSaveMode.Modified)

            ' Force a reload of the changed section, 
            ' if needed. This makes the new values available 
            ' for reading.
            ConfigurationManager.RefreshSection(sectionName)

            If currentSection Is Nothing Then
                ' Create a custom configuration section.
                currentSection = New ConsoleSection()

                ' Define where in the configuration file 
                ' hierarchy the associated 
                ' configuration section can be declared.
                ' The following assignment assures that 
                ' the configuration information can be 
                ' defined in the user.config file in the 
                ' roaming user directory. 
                currentSection.SectionInformation. _
                AllowExeDefinition = _
                    ConfigurationAllowExeDefinition. _
                    MachineToLocalUser

                ' Allow the configuration section to be 
                ' overridden by lower-level configuration 
                ' files.
                ' This means that lower-level files can 
                ' contain()the section (use the same name) 
                ' and assign different values to it as 
                ' done by the function 
                ' GetApplicationConfiguration() in this
                ' example.
                currentSection.SectionInformation. _
                    AllowOverride = True

                ' Store console settings for roaming users.
                currentSection.ConsoleElement. _
                BackgroundColor = ConsoleColor.Blue
                currentSection.ConsoleElement. _
                ForegroundColor = ConsoleColor.Yellow

                ' Add configuration information to 
                ' the configuration file.
                config.Sections.Add(sectionName, _
                    currentSection)
                config.Save(ConfigurationSaveMode.Modified)
                ' Force a reload of the changed section. This 
                ' makes the new values available for reading.
                ConfigurationManager.RefreshSection( _
                    sectionName)
            End If
        Catch e As ConfigurationErrorsException
            Console.WriteLine("[Exception error: {0}]", _
                              e.ToString())
        End Try

        ' Set console properties using values
        ' stored in the configuration file.
        Console.BackgroundColor = _
            currentSection.ConsoleElement.BackgroundColor
        Console.ForegroundColor = _
            currentSection.ConsoleElement.ForegroundColor
        ' Apply the changes.
        Console.Clear()

        ' Display feedback.
        Console.WriteLine()
        Console.WriteLine( _
            "Using OpenExeConfiguration(userLevel).")
        Console.WriteLine( _
            "Configuration file is: {0}", config.FilePath)
    End Sub

Açıklamalar

İstemci uygulamaları, tüm kullanıcılar için geçerli olan genel bir yapılandırmayı, tek tek kullanıcılar için geçerli olan ayrı yapılandırmaları ve gezici kullanıcılar için geçerli olan yapılandırmaları kullanır. userLevel parametresi, kullanıcı düzeyi (yapılandırma dosyası uygulamayla aynı dizinde) veya kullanıcı düzeyi (yapılandırma dosyası kullanıcı düzeyi tarafından belirlenen bir uygulama ayarları yolunda) olup olmadığını belirterek açılan yapılandırma dosyasının konumunu belirler.

için userLevelaşağıdaki değerlerden birini geçirerek hangi yapılandırmanın alınacağını belirtin:

  • Tüm kullanıcılar için geçerli olan nesneyi almak Configuration için olarak ayarlayın userLevelNone.

  • Geçerli kullanıcıya uygulanan yerel Configuration nesneyi almak için olarak ayarlayın userLevelPerUserRoamingAndLocal.

  • Geçerli kullanıcıya uygulanan dolaşım Configuration nesnesini almak için olarak ayarlayın userLevelPerUserRoaming.

    Not

    Bir kaynağın Configuration nesnesini almak için kodunuzun ayarları devraldığı tüm yapılandırma dosyaları üzerinde okuma izinlerine sahip olması gerekir. Bir yapılandırma dosyasını güncelleştirmek için kodunuzun hem yapılandırma dosyası hem de bulunduğu dizin için yazma izinlerine sahip olması gerekir.

Ayrıca bkz.

Şunlara uygulanır

OpenExeConfiguration(String)

Kaynak:
ConfigurationManager.cs
Kaynak:
ConfigurationManager.cs
Kaynak:
ConfigurationManager.cs

Belirtilen istemci yapılandırma dosyasını nesne Configuration olarak açar.

public:
 static System::Configuration::Configuration ^ OpenExeConfiguration(System::String ^ exePath);
public static System.Configuration.Configuration OpenExeConfiguration (string exePath);
static member OpenExeConfiguration : string -> System.Configuration.Configuration
Public Shared Function OpenExeConfiguration (exePath As String) As Configuration

Parametreler

exePath
String

Yürütülebilir (exe) dosyasının yolu.

Döndürülenler

Belirtilen yapılandırma dosyası.

Özel durumlar

Yapılandırma dosyası yüklenemedi.

Örnekler

Aşağıdaki kod örneğinde yönteminin nasıl kullanılacağı gösterilmektedir OpenExeConfiguration .

    // Get the application configuration file.
    // This function uses the 
    // OpenExeConfiguration(string)method 
    // to get the application configuration file. 
    // It also creates a custom ConsoleSection and 
    // sets its ConsoleElement BackgroundColor and
    // ForegroundColor properties to black and white
    // respectively. Then it uses these properties to
    // set the console colors.  
    public static void GetAppConfiguration()
    {

      // Get the application path needed to obtain
      // the application configuration file.
#if DEBUG
      string applicationName =
          Environment.GetCommandLineArgs()[0];
#else
           string applicationName =
          Environment.GetCommandLineArgs()[0]+ ".exe";
#endif

      string exePath = System.IO.Path.Combine(
          Environment.CurrentDirectory, applicationName);

      // Get the configuration file. The file name has
      // this format appname.exe.config.
      System.Configuration.Configuration config =
        ConfigurationManager.OpenExeConfiguration(exePath);

      try
      {
        
        // Create a custom configuration section
        // having the same name that is used in the 
        // roaming configuration file.
        // This is because the configuration section 
        // can be overridden by lower-level 
        // configuration files. 
        // See the GetRoamingConfiguration() function in 
        // this example.
        string sectionName = "consoleSection";
        ConsoleSection customSection = new ConsoleSection();

        if (config.Sections[sectionName] == null)
        {
          // Create a custom section if it does 
          // not exist yet.
          
          // Store console settings.
          customSection.ConsoleElement.BackgroundColor =
              ConsoleColor.Black;
          customSection.ConsoleElement.ForegroundColor =
              ConsoleColor.White;

          // Add configuration information to the
          // configuration file.
          config.Sections.Add(sectionName, customSection);
          config.Save(ConfigurationSaveMode.Modified);
          // Force a reload of the changed section.
          // This makes the new values available for reading.
          ConfigurationManager.RefreshSection(sectionName);
        }
        // Set console properties using values
        // stored in the configuration file.
        customSection =
            (ConsoleSection)config.GetSection(sectionName);
        Console.BackgroundColor =
            customSection.ConsoleElement.BackgroundColor;
        Console.ForegroundColor =
            customSection.ConsoleElement.ForegroundColor;
        // Apply the changes.
        Console.Clear();
      }
      catch (ConfigurationErrorsException e)
      {
        Console.WriteLine("[Error exception: {0}]",
            e.ToString());
      }
     
      // Display feedback.
      Console.WriteLine();
      Console.WriteLine("Using OpenExeConfiguration(string).");
      // Display the current configuration file path.
      Console.WriteLine("Configuration file is: {0}", 
        config.FilePath);
    }
    ' Get the application configuration file.
    ' This function uses the 
    ' OpenExeConfiguration(string)method 
    ' to get the application configuration file. 
    ' It also creates a custom ConsoleSection and 
    ' sets its ConsoleElement BackgroundColor and
    ' ForegroundColor properties to black and white
    ' respectively. Then it uses these properties to
    ' set the console colors.  
    Public Shared Sub GetAppConfiguration()
        ' Get the application path needed to obtain
        ' the application configuration file.
#If DEBUG Then
        Dim applicationName As String = _
            Environment.GetCommandLineArgs()(0)
#Else
            Dim applicationName As String = _
                Environment.GetCommandLineArgs()(0) + ".exe"
#End If

        Dim exePath As String = _
        System.IO.Path.Combine( _
            Environment.CurrentDirectory, applicationName)

        ' Get the configuration file. The file name has
        ' this format appname.exe.config.
        Dim config As System.Configuration.Configuration = _
            ConfigurationManager.OpenExeConfiguration(exePath)

        Try

            ' Create a custom configuration section
            ' having the same name that is used in the 
            ' roaming configuration file.
            ' This is because the configuration section 
            ' can be overridden by lower-level 
            ' configuration files. 
            ' See the GetRoamingConfiguration() function in 
            ' this example.
            Dim sectionName As String = "consoleSection"
            Dim customSection As New ConsoleSection()

            If config.Sections(sectionName) Is Nothing Then
                ' Create a custom section if it does 
                ' not exist yet.

                ' Store console settings.
                customSection.ConsoleElement. _
                    BackgroundColor = ConsoleColor.Black
                customSection.ConsoleElement. _
                    ForegroundColor = ConsoleColor.White

                ' Add configuration information to the
                ' configuration file.
                config.Sections.Add(sectionName, _
                                    customSection)
                config.Save(ConfigurationSaveMode.Modified)
                ' Force a reload of the changed section.
                ' This makes the new values available 
                ' for reading.
                ConfigurationManager.RefreshSection( _
                    sectionName)
            End If
            ' Set console properties using values
            ' stored in the configuration file.
            customSection = DirectCast( _
                config.GetSection(sectionName),  _
                    ConsoleSection)
            Console.BackgroundColor = _
                customSection.ConsoleElement.BackgroundColor
            Console.ForegroundColor = _
                customSection.ConsoleElement.ForegroundColor
            ' Apply the changes.
            Console.Clear()
        Catch e As ConfigurationErrorsException
            Console.WriteLine("[Error exception: {0}]", _
                              e.ToString())
        End Try

        ' Display feedback.
        Console.WriteLine()
        Console.WriteLine( _
            "Using OpenExeConfiguration(string).")
        ' Display the current configuration file path.
        Console.WriteLine( _
            "Configuration file is: {0}", config.FilePath)
    End Sub

Açıklamalar

Bu yöntem aşırı yüklemesinin çağrılması, parametresi olarak ayarlanmış aşırı yüklemeyi çağırmaya OpenMappedExeConfiguration(ExeConfigurationFileMap, ConfigurationUserLevel, Boolean)preLoadfalseeşdeğerdir.

Ayrıca bkz.

Şunlara uygulanır