Color.ToString Yöntem
Tanım
Önemli
Bazı bilgiler ürünün ön sürümüyle ilgilidir ve sürüm öncesinde önemli değişiklikler yapılmış olabilir. Burada verilen bilgilerle ilgili olarak Microsoft açık veya zımni hiçbir garanti vermez.
Bu Color yapıyı okunabilir bir dizeye dönüştürür.
public:
override System::String ^ ToString();
public override string ToString ();
override this.ToString : unit -> string
Public Overrides Function ToString () As String
Döndürülenler
yöntemi veya FromKnownColor(KnownColor) yöntemi kullanılarak FromName(String) önceden tanımlanmış bir renkten oluşturulduysaColor, bunun Coloradı olan bir dize; aksi takdirde, ARGB bileşen adlarından ve değerlerinden oluşan bir dize.
Örnekler
Aşağıdaki kod örneği, Windows Forms ile kullanılmak üzere tasarlanmıştır ve olay işleyicisinin bir parametresi olan öğesini gerektirirPaintEventArgse
.Paint Kod aşağıdaki eylemleri gerçekleştirir:
Sıfır olmayan yeşil bileşene ve sıfır değerli kırmızı bileşene sahip ve sistem renkleri olmayan bilinen tüm renkleri bulmak için numaralandırma öğelerini yineler KnownColor .
Her yineleme sırasında, öğesini (ölçütlerle KnownColor eşleşiyorsa) bir diziye kaydeder.
Dikdörtgenleri boyamak için fırça kullanır. Dikdörtgenlerin her biri, ilk adımda belirtilen ölçütlerle eşleşen bir KnownColor boyanmış. ve bileşen değerlerinin KnownColor adı da görüntülenir.
Bu örnekte, bilinen bazı renkler görüntülenir ve renklerin adlarını ve bunların dört bileşen değerini görüntülemek için kullanılır ToString .
void ToArgbToStringExample2( PaintEventArgs^ e )
{
Graphics^ g = e->Graphics;
// Color structure used for temporary storage.
Color someColor = Color::FromArgb( 0 );
// Array to store KnownColor values that match the criteria.
array<KnownColor>^colorMatches = gcnew array<KnownColor>(167);
// Number of matches found.
int count = 0;
// Iterate through the KnownColor enums to find all corresponding colors
// that have a nonzero green component and zero-value red component and
// that are not system colors.
for ( KnownColor enumValue = (KnownColor)0; enumValue <= KnownColor::YellowGreen; enumValue = enumValue + (KnownColor)1 )
{
someColor = Color::FromKnownColor( enumValue );
if ( someColor.G != 0 && someColor.R == 0 && !someColor.IsSystemColor )
colorMatches[ count++ ] = enumValue;
}
SolidBrush^ myBrush1 = gcnew SolidBrush( someColor );
System::Drawing::Font^ myFont = gcnew System::Drawing::Font( "Arial",9 );
int x = 40;
int y = 40;
// Iterate through the matches that were found and display each color that
// corresponds with the enum value in the array. also display the name of
// the KnownColor and the ARGB components.
for ( int i = 0; i < count; i++ )
{
// Display the color.
someColor = Color::FromKnownColor( colorMatches[ i ] );
myBrush1->Color = someColor;
g->FillRectangle( myBrush1, x, y, 50, 30 );
// Display KnownColor name and the four component values. To display the
// component values: Use the ToArgb method to get the 32-bit ARGB value
// of someColor, which was created from a KnownColor. Then create a
// Color structure from the 32-bit ARGB value and set someColor equal to
// this new Color structure. Then use the ToString method to convert it to
// a string.
g->DrawString( someColor.ToString(), myFont, Brushes::Black, (float)x + 55, (float)y );
someColor = Color::FromArgb( someColor.ToArgb() );
g->DrawString( someColor.ToString(), myFont, Brushes::Black, (float)x + 55, (float)y + 15 );
y += 40;
}
}
public void ToArgbToStringExample2(PaintEventArgs e)
{
Graphics g = e.Graphics;
// Color structure used for temporary storage.
Color someColor = Color.FromArgb(0);
// Array to store KnownColor values that match the criteria.
KnownColor[] colorMatches = new KnownColor[167];
// Number of matches found.
int count = 0;
// Iterate through the KnownColor enums to find all corresponding colors
// that have a nonzero green component and zero-value red component and
// that are not system colors.
for (KnownColor enumValue = 0;
enumValue <= KnownColor.YellowGreen; enumValue++)
{
someColor = Color.FromKnownColor(enumValue);
if (someColor.G != 0 && someColor.R == 0 && !someColor.IsSystemColor)
colorMatches[count++] = enumValue;
}
SolidBrush myBrush1 = new SolidBrush(someColor);
Font myFont = new Font("Arial", 9);
int x = 40;
int y = 40;
// Iterate through the matches that were found and display each color that
// corresponds with the enum value in the array. also display the name of
// the KnownColor and the ARGB components.
for (int i = 0; i < count; i++)
{
// Display the color.
someColor = Color.FromKnownColor(colorMatches[i]);
myBrush1.Color = someColor;
g.FillRectangle(myBrush1, x, y, 50, 30);
// Display KnownColor name and the four component values. To display the
// component values: Use the ToArgb method to get the 32-bit ARGB value
// of someColor, which was created from a KnownColor. Then create a
// Color structure from the 32-bit ARGB value and set someColor equal to
// this new Color structure. Then use the ToString method to convert it to
// a string.
g.DrawString(someColor.ToString(), myFont, Brushes.Black, x + 55, y);
someColor = Color.FromArgb(someColor.ToArgb());
g.DrawString(someColor.ToString(), myFont, Brushes.Black, x + 55, y + 15);
y += 40;
}
}
Public Sub ToArgbToStringExample2(ByVal e As PaintEventArgs)
Dim g As Graphics = e.Graphics
' Color structure used for temporary storage.
Dim someColor As Color = Color.FromArgb(0)
' Array to store KnownColor values that match the criteria.
Dim colorMatches(167) As KnownColor
' Number of matches found.
Dim count As Integer = 0
' Iterate through KnownColor enums to find all corresponding colors
' that have a non-zero green component and zero-valued red
' component and that are not system colors.
Dim enumValue As KnownColor
For enumValue = 0 To KnownColor.YellowGreen
someColor = Color.FromKnownColor(enumValue)
If someColor.G <> 0 And someColor.R = 0 And _
Not someColor.IsSystemColor Then
colorMatches(count) = enumValue
count += 1
End If
Next enumValue
Dim myBrush1 As New SolidBrush(someColor)
Dim myFont As New Font("Arial", 9)
Dim x As Integer = 40
Dim y As Integer = 40
' Iterate through the matches found and display each color that
' corresponds with the enum value in the array. Also display the
' name of the KnownColor and the ARGB components.
Dim i As Integer
For i = 0 To count - 1
' Display the color
someColor = Color.FromKnownColor(colorMatches(i))
myBrush1.Color = someColor
g.FillRectangle(myBrush1, x, y, 50, 30)
' Display KnownColor name and four component values. To display
' component values: Use the ToArgb method to get the 32-bit
' ARGB value of someColor (created from a KnownColor). Create
' a Color structure from the 32-bit ARGB value and set someColor
' equal to this new Color structure. Then use the ToString method
' to convert it to a string.
g.DrawString(someColor.ToString(), myFont, Brushes.Black, _
x + 55, y)
someColor = Color.FromArgb(someColor.ToArgb())
g.DrawString(someColor.ToString(), myFont, Brushes.Black, _
x + 55, y + 15)
y += 40
Next i
End Sub
Açıklamalar
Önceden tanımlanmış bir renk bilinen renk olarak da adlandırılır ve sabit listesinin KnownColor bir öğesiyle temsil edilir. ToString yöntemi kullanılarak FromArgb oluşturulan bir Color yapıya uygulandığında, ToString ARGB değeri önceden tanımlanmış bir rengin ARGB değeriyle eşleşse bile ARGB bileşen adlarından ve değerlerinden oluşan bir dize döndürür.
Şunlara uygulanır
Geri Bildirim
https://aka.ms/ContentUserFeedback.
Çok yakında: 2024 boyunca, içerik için geri bildirim mekanizması olarak GitHub Sorunları’nı kullanımdan kaldıracak ve yeni bir geri bildirim sistemiyle değiştireceğiz. Daha fazla bilgi için bkz.Gönderin ve geri bildirimi görüntüleyin