GraphicsPathIterator.CopyData(PointF[], Byte[], Int32, Int32) Yöntem

Tanım

Ad Alanı:

System.Drawing.Drawing2D

Bütünleştirilmiş Kod:

System.Drawing.Common.dll

Paket:

System.Drawing.Common v8.0.0

Kaynak:

GraphicsPathIterator.cs

öğesinin PathPointsGraphicsPath özellik ve PathTypes özellik dizilerini belirtilen iki diziye kopyalar.

public:
 int CopyData(cli::array <System::Drawing::PointF> ^ % points, cli::array <System::Byte> ^ % types, int startIndex, int endIndex);

public int CopyData (ref System.Drawing.PointF[] points, ref byte[] types, int startIndex, int endIndex);

member this.CopyData : PointF[] * Byte[] * int * int -> int

Public Function CopyData (ByRef points As PointF(), ByRef types As Byte(), startIndex As Integer, endIndex As Integer) As Integer

Parametreler

points

PointF[]

Dönüşte, yoldaki noktaları temsil eden bir yapı dizisi PointF içerir.

types

Byte[]

Döndürdüğünüzde, yoldaki nokta türlerini temsil eden bir bayt dizisi içerir.

startIndex

Int32

Dizilerin başlangıç dizinini belirtir.

endIndex

Int32

Dizilerin bitiş dizinini belirtir.

Döndürülenler

Int32

Kopyalanan nokta sayısı.

Örnekler

Aşağıdaki örnek, Windows Forms ile kullanılmak üzere tasarlanmıştır ve bir OnPaint olay nesnesi gerektirir.PaintEventArgse Kod aşağıdaki eylemleri gerçekleştirir:

• Grafik yolu oluşturur.

• Bunu birkaç temel öğe ve bazı işaretçilerle doldurur.

• Yol verilerini ekranın sol tarafında Listeler.

• bir GraphicsPathIterator oluşturur ve geri sarmalar.

• Yol veri dizinini ikinci işaretçiye artırır.

• CopyData Başlangıç ve bitiş dizinleri arasında yer alan yol verilerini noktalara ve tür dizilerine kopyalamak için yöntemini çağırır.

• Kopyalanan bu verileri ekranın sağ tarafına Listeler.

public:
   void CopyDataExample( PaintEventArgs^ e )
   {
      // Create a graphics path.
      GraphicsPath^ myPath = gcnew GraphicsPath;

      // Set up a points array.
      array<Point>^ myPoints = {Point(20,20),Point(120,120),Point(20,120),Point(20,20)};

      // Create a rectangle.
      Rectangle myRect = Rectangle(120,120,100,100);

      // Add the points, rectangle, and an ellipse to the path.
      myPath->AddLines( myPoints );
      myPath->SetMarkers();
      myPath->AddRectangle( myRect );
      myPath->SetMarkers();
      myPath->AddEllipse( 220, 220, 100, 100 );

      // Get the total number of points for the path, and arrays of
      // the  points and types.
      int myPathPointCount = myPath->PointCount;
      array<PointF>^myPathPoints = myPath->PathPoints;
      array<Byte>^myPathTypes = myPath->PathTypes;

      // Set up variables for listing the array of points on the left
      // side of the screen.
      int i;
      float j = 20;
      System::Drawing::Font^ myFont = gcnew System::Drawing::Font( "Arial",8 );
      SolidBrush^ myBrush = gcnew SolidBrush( Color::Black );

      // List the set of points and types and types to the left side
      // of the screen.
      for ( i = 0; i < myPathPointCount; i++ )
      {
         e->Graphics->DrawString( myPathPoints[ i ].X + ", " + myPathPoints[ i ].Y + ", " + myPathTypes[ i ], myFont, myBrush, 20, j );
         j += 20;
      }

      // Create a GraphicsPathIterator for myPath and rewind it.
      GraphicsPathIterator^ myPathIterator = gcnew GraphicsPathIterator( myPath );
      myPathIterator->Rewind();

      // Set up the arrays to receive the copied data.
      array<PointF>^points = gcnew array<PointF>(myPathIterator->Count);
      array<Byte>^types = gcnew array<Byte>(myPathIterator->Count);
      int myStartIndex;
      int myEndIndex;
      
      // Increment the starting index to the second marker in the
      // path.
      myPathIterator->NextMarker( myStartIndex, myEndIndex );
      myPathIterator->NextMarker( myStartIndex, myEndIndex );
      
      // Copy all the points and types from the starting index to the
      // ending index to the points array and the types array
      // respectively.
      int numPointsCopied = myPathIterator->CopyData( points, types, myStartIndex, myEndIndex );
      
      // List the copied points to the right side of the screen.
      j = 20;
      int copiedStartIndex = 0;
      for ( i = 0; i < numPointsCopied; i++ )
      {
         copiedStartIndex = myStartIndex + i;
         e->Graphics->DrawString( String::Format( "Point: {0}, Value: {1}, Type: {2}", copiedStartIndex, points[ i ], types[ i ] ), myFont, myBrush, 200, j );
         j += 20;

      }
   }

public void CopyDataExample(PaintEventArgs e)
{
             
    // Create a graphics path.
    GraphicsPath myPath = new GraphicsPath();
             
    // Set up a points array.
    Point[] myPoints =
             {
                 new Point(20, 20),
                 new Point(120, 120),
                 new Point(20, 120),
                 new Point(20, 20)
             };
             
    // Create a rectangle.
    Rectangle myRect = new Rectangle(120, 120, 100, 100);
             
    // Add the points, rectangle, and an ellipse to the path.
    myPath.AddLines(myPoints);
    myPath.SetMarkers();
    myPath.AddRectangle(myRect);
    myPath.SetMarkers();
    myPath.AddEllipse(220, 220, 100, 100);
             
    // Get the total number of points for the path, and arrays of
    // the  points and types.
    int myPathPointCount = myPath.PointCount;
    PointF[] myPathPoints = myPath.PathPoints;
    byte[] myPathTypes = myPath.PathTypes;
             
    // Set up variables for listing the array of points on the left
    // side of the screen.
    int i;
    float j = 20;
    Font myFont = new Font("Arial", 8);
    SolidBrush myBrush = new SolidBrush(Color.Black);
             
    // List the set of points and types and types to the left side
    // of the screen.
    for(i=0; i<myPathPointCount; i++)
    {
        e.Graphics.DrawString(myPathPoints[i].X.ToString()+
            ", " + myPathPoints[i].Y.ToString() + ", " +
            myPathTypes[i].ToString(),
            myFont,
            myBrush,
            20,
            j);
        j+=20;
    }
             
    // Create a GraphicsPathIterator for myPath and rewind it.
    GraphicsPathIterator myPathIterator =
        new GraphicsPathIterator(myPath);
    myPathIterator.Rewind();
             
    // Set up the arrays to receive the copied data.
    PointF[] points = new PointF[myPathIterator.Count];
    byte[] types = new byte[myPathIterator.Count];
    int myStartIndex;
    int myEndIndex;
             
    // Increment the starting index to the second marker in the
    // path.
    myPathIterator.NextMarker(out myStartIndex, out myEndIndex);
    myPathIterator.NextMarker(out myStartIndex, out myEndIndex);
             
    // Copy all the points and types from the starting index to the
    // ending index to the points array and the types array
    // respectively.
    int numPointsCopied = myPathIterator.CopyData(
        ref points,
        ref types,
        myStartIndex,
        myEndIndex);
             
    // List the copied points to the right side of the screen.
    j = 20;
    int copiedStartIndex = 0;
    for(i=0; i<numPointsCopied; i++)
    {
        copiedStartIndex = myStartIndex + i;
        e.Graphics.DrawString(
            "Point: " + copiedStartIndex.ToString() +
            ", Value: " + points[i].ToString() +
            ", Type: " + types[i].ToString(),
            myFont,
            myBrush,
            200,
            j);
        j+=20;
    }
}

Public Sub CopyDataExample(ByVal e As PaintEventArgs)

    ' Create a graphics path.
    Dim myPath As New GraphicsPath

    ' Set up a points array.
    Dim myPoints As Point() = {New Point(20, 20), _
    New Point(120, 120), New Point(20, 120), New Point(20, 20)}

    ' Create a rectangle.
    Dim myRect As New Rectangle(120, 120, 100, 100)

    ' Add the points, rectangle, and an ellipse to the path.
    myPath.AddLines(myPoints)
    myPath.SetMarkers()
    myPath.AddRectangle(myRect)
    myPath.SetMarkers()
    myPath.AddEllipse(220, 220, 100, 100)

    ' Get the total number of points for the path, and arrays of the
    ' points and types.
    Dim myPathPointCount As Integer = myPath.PointCount
    Dim myPathPoints As PointF() = myPath.PathPoints
    Dim myPathTypes As Byte() = myPath.PathTypes

    ' Set up variables for listing the array of points on the left side
    ' of the screen.
    Dim i As Integer
    Dim j As Single = 20
    Dim myFont As New Font("Arial", 8)
    Dim myBrush As New SolidBrush(Color.Black)

    ' List the set of points and types and types to the left side of
    ' the screen.
    For i = 0 To myPathPointCount - 1
        e.Graphics.DrawString(myPathPoints(i).X.ToString() + ", " + _
        myPathPoints(i).Y.ToString() + ", " + _
        myPathTypes(i).ToString(), myFont, myBrush, 20, j)
        j += 20
    Next i

    ' Create a GraphicsPathIterator for myPath and rewind it.
    Dim myPathIterator As New GraphicsPathIterator(myPath)
    myPathIterator.Rewind()

    ' Set up the arrays to receive the copied data.
    Dim points(myPathIterator.Count) As PointF
    Dim types(myPathIterator.Count) As Byte
    Dim myStartIndex As Integer
    Dim myEndIndex As Integer

    ' Increment the starting index to the second marker in the path.
    myPathIterator.NextMarker(myStartIndex, myEndIndex)
    myPathIterator.NextMarker(myStartIndex, myEndIndex)

    ' Copy all the points and types from the starting index to the
    ' ending index to the  points array and the types array
    ' respectively.
    Dim numPointsCopied As Integer = myPathIterator.CopyData(points, _
    types, myStartIndex, myEndIndex)

    ' List the copied points to the right side of the screen.
    j = 20
    Dim copiedStartIndex As Integer = 0
    For i = 0 To numPointsCopied - 1
        copiedStartIndex = myStartIndex + i
        e.Graphics.DrawString("Point: " + _
        copiedStartIndex.ToString() + ", Value: " + _
        points(i).ToString() + ", Type: " + types(i).ToString(), _
        myFont, myBrush, 200, j)
        j += 20
    Next i
End Sub

Açıklamalar

startIndex Belirtilen yol veri aralığını kopyalamak için ve endIndex parametrelerini kullanın.