Matrix.Multiply Yöntem

Tanım

Ad Alanı:

System.Drawing.Drawing2D

Bütünleştirilmiş Kod:

System.Drawing.Common.dll

Paket:

System.Drawing.Common v8.0.0

Bunu Matrix belirtilen Matrix değeriyle çarparak belirtilen Matrixdeğerinin başına ekler.

Aşırı Yüklemeler

Multiply(Matrix)	Bunu Matrix parametresinde matrix belirtilen matrisle çarpar ve belirtilen Matrixdeğerini önceden ekler.
Multiply(Matrix, MatrixOrder)	Bunu Matrix parametresinde ve parametresinde matrix belirtilen sırada belirtilen matrisle order çarpar.

Multiply(Matrix)

Kaynak:

Matrix.cs

Bunu Matrix parametresinde matrix belirtilen matrisle çarpar ve belirtilen Matrixdeğerini önceden ekler.

public:
 void Multiply(System::Drawing::Drawing2D::Matrix ^ matrix);

public void Multiply (System.Drawing.Drawing2D.Matrix matrix);

member this.Multiply : System.Drawing.Drawing2D.Matrix -> unit

Public Sub Multiply (matrix As Matrix)

Parametreler

matrix

Matrix

Bunun MatrixMatrix çarpılacağı yer.

Örnekler

Örnek için bkz. Multiply

Multiply(Matrix, MatrixOrder)

Kaynak:

Matrix.cs

Bunu Matrix parametresinde ve parametresinde matrix belirtilen sırada belirtilen matrisle order çarpar.

public:
 void Multiply(System::Drawing::Drawing2D::Matrix ^ matrix, System::Drawing::Drawing2D::MatrixOrder order);

public void Multiply (System.Drawing.Drawing2D.Matrix matrix, System.Drawing.Drawing2D.MatrixOrder order);

member this.Multiply : System.Drawing.Drawing2D.Matrix * System.Drawing.Drawing2D.MatrixOrder -> unit

Public Sub Multiply (matrix As Matrix, order As MatrixOrder)

Parametreler

matrix

Matrix

Bunun MatrixMatrix çarpılacağı yer.

order

MatrixOrder

MatrixOrder Çarpma sırasını temsil eden.

Örnekler

Aşağıdaki kod örneği, Windows Forms ile kullanılmak üzere tasarlanmıştır ve bir Paint olay nesnesi gerektirir.PaintEventArgse Kod aşağıdaki eylemleri gerçekleştirir:

• Üç matris oluşturur.

• Matris 1'in içeriğini ekrana Listeler.

• Matris 1'i matris 2 ile çarpar ve sonucu matris 1'de depolar.

• Matris 1'in içeriğini ekrana Listeler.

• Matris 1'de depolanan sonucu matris 3 ile çarpar ve sonucu yine matris 1'de depolar.

• Matris 1'in içeriğini ekrana Listeler.

• Matris 1 dönüşümünü (mavi dikdörtgen) uygulamadan önce ekrana bir dikdörtgen çizer.

• Dönüştürmeyi dikdörtgene uygular.

• Önceki dikdörtgenle aynı koordinatları kullanarak dönüştürülmüş dikdörtgeni ekrana (kırmızı dikdörtgen) çizer.

Kırmızı dikdörtgenin yatay yönde iki kat ölçeklendirildiğini, 90 derece döndürüldüğünü ve ardından x yönünde 250 nokta ve y yönünde 50 nokta taşındığını (çevrildiğini) unutmayın.

public:
   void MultiplyExample( PaintEventArgs^ e )
   {
      Pen^ myPen = gcnew Pen( Color::Blue,1.0f );
      Pen^ myPen2 = gcnew Pen( Color::Red,1.0f );

      // Set up the matrices.
      Matrix^ myMatrix1 = gcnew Matrix( 2.0f,0.0f,0.0f,1.0f,0.0f,0.0f );
      Matrix^ myMatrix2 = gcnew Matrix( 0.0f,1.0f,-1.0f,0.0f,0.0f,0.0f );
      Matrix^ myMatrix3 = gcnew Matrix( 1.0f,0.0f,0.0f,1.0f,250.0f,50.0f );

      // Display the elements of the starting matrix.
      ListMatrixElements( e, myMatrix1, "Beginning Matrix", 6, 40 );

      // Multiply Matrix1 by Matrix 2.
      myMatrix1->Multiply( myMatrix2, MatrixOrder::Append );

      // Display the result of the multiplication of Matrix1 and
      // Matrix2.
      ListMatrixElements( e, myMatrix1, "Matrix After 1st Multiplication", 6, 60 );

      // Multiply the result from the previous multiplication by
      // Matrix3.
      myMatrix1->Multiply( myMatrix3, MatrixOrder::Append );

      // Display the result of the previous multiplication
      // multiplied by Matrix3.
      ListMatrixElements1( e, myMatrix1, "Matrix After 2nd Multiplication", 6, 80 );

      // Draw the rectangle prior to transformation.
      e->Graphics->DrawRectangle( myPen, 0, 0, 100, 100 );

      // Make the transformation.
      e->Graphics->Transform = myMatrix1;

      // Draw the rectangle after transformation.
      e->Graphics->DrawRectangle( myPen2, 0, 0, 100, 100 );
   }

   //-------------------------------------------------------
   // The following function is a helper function to
   // list the contents of a matrix.
   //-------------------------------------------------------
   void ListMatrixElements1( PaintEventArgs^ e, Matrix^ matrix, String^ matrixName, int numElements, int y )
   {
      // Set up variables for drawing the array
      // of points to the screen.
      int i;
      float x = 20,X = 200;
      System::Drawing::Font^ myFont = gcnew System::Drawing::Font( "Arial",8 );
      SolidBrush^ myBrush = gcnew SolidBrush( Color::Black );

      // Draw the matrix name to the screen.
      e->Graphics->DrawString( String::Concat( matrixName, ":  " ), myFont, myBrush, (float)x, (float)y );

      // Draw the set of path points and types to the screen.
      for ( i = 0; i < numElements; i++ )
      {
         e->Graphics->DrawString( String::Concat( matrix->Elements[ i ], ", " ), myFont, myBrush, (float)X, (float)y );
         X += 30;
      }
   }

public void MultiplyExample(PaintEventArgs e)
{
    Pen myPen = new Pen(Color.Blue, 1);
    Pen myPen2 = new Pen(Color.Red, 1);
             
    // Set up the matrices.
    Matrix myMatrix1 = new Matrix(
        2.0f, 0.0f, 0.0f, 1.0f, 0.0f, 0.0f);  
    
    Matrix myMatrix2 = new Matrix(
        0.0f, 1.0f, -1.0f, 0.0f, 0.0f, 0.0f); 
  
    Matrix myMatrix3 = new Matrix(
        1.0f, 0.0f, 0.0f, 1.0f, 250.0f, 50.0f);  

    // Display the elements of the starting matrix.
    ListMatrixElements(e, myMatrix1, "Beginning Matrix", 6, 40);
             
    // Multiply Matrix1 by Matrix 2.
    myMatrix1.Multiply(myMatrix2, MatrixOrder.Append);
             
    // Display the result of the multiplication of Matrix1 and
             
    // Matrix2.
    ListMatrixElements(e,
        myMatrix1,
        "Matrix After 1st Multiplication",
        6,
        60);
             
    // Multiply the result from the pervious multiplication by
    // Matrix3.
    myMatrix1.Multiply(myMatrix3, MatrixOrder.Append);
             
    // Display the result of the previous multiplication
    // multiplied by Matrix3.
    ListMatrixElements1(e,
        myMatrix1,
        "Matrix After 2nd Multiplication",
        6,
        80);
             
    // Draw the rectangle prior to transformation.
    e.Graphics.DrawRectangle(myPen, 0, 0, 100, 100);
             
    // Make the transformation.
    e.Graphics.Transform = myMatrix1;
             
    // Draw the rectangle after transformation.
    e.Graphics.DrawRectangle(myPen2, 0, 0, 100, 100);
}
             
//-------------------------------------------------------
// The following function is a helper function to
// list the contents of a matrix.
//-------------------------------------------------------
public void ListMatrixElements1(
    PaintEventArgs e,
    Matrix matrix,
    string matrixName,
    int numElements,
    int y)
{
             
    // Set up variables for drawing the array
    // of points to the screen.
    int i;
    float x = 20, X = 200;
    Font myFont = new Font("Arial", 8);
    SolidBrush myBrush = new SolidBrush(Color.Black);
             
    // Draw the matrix name to the screen.
    e.Graphics.DrawString(
        matrixName + ":  ",
        myFont,
        myBrush,
        x,
        y);
             
    // Draw the set of path points and types to the screen.
    for(i=0; i<numElements; i++)
    {
        e.Graphics.DrawString(
            matrix.Elements[i].ToString() + ", ",
            myFont,
            myBrush,
            X,
            y);
        X += 30;
    }
}

Public Sub MultiplyExample(ByVal e As PaintEventArgs)
    Dim myPen As New Pen(Color.Blue, 1)
    Dim myPen2 As New Pen(Color.Red, 1)

    ' Set up the matrices.
    Dim myMatrix1 As New Matrix(2.0F, 0.0F, 0.0F, 1.0F, 0.0F, 0.0F)

    ' Scale.
    Dim myMatrix2 As New Matrix(0.0F, 1.0F, -1.0F, 0.0F, 0.0F, 0.0F)

    ' Rotate 90.
    Dim myMatrix3 As New Matrix(1.0F, 0.0F, 0.0F, 1.0F, 250.0F, 50.0F)

    ' Display the elements of the starting matrix.
    ListMatrixElementsHelper(e, myMatrix1, "Beginning Matrix", 6, 40)

    ' Multiply Matrix1 by Matrix 2.
    myMatrix1.Multiply(myMatrix2, MatrixOrder.Append)

    ' Display the result of the multiplication of Matrix1 and
    ' Matrix2.
    ListMatrixElementsHelper(e, myMatrix1, _
    "Matrix After 1st Multiplication", 6, 60)

    ' Multiply the result from the pervious multiplication by
    ' Matrix3.
    myMatrix1.Multiply(myMatrix3, MatrixOrder.Append)

    ' Display the result of the previous multiplication
    ' multiplied by Matrix3.
    ListMatrixElementsHelper1(e, myMatrix1, _
    "Matrix After 2nd Multiplication", 6, 80)

    ' Draw the rectangle prior to transformation.
    e.Graphics.DrawRectangle(myPen, 0, 0, 100, 100)
    e.Graphics.Transform = myMatrix1

    ' Draw the rectangle after transformation.
    e.Graphics.DrawRectangle(myPen2, 0, 0, 100, 100)
End Sub

' A helper function to list the contents of a matrix.
Public Sub ListMatrixElementsHelper1(ByVal e As PaintEventArgs, _
ByVal matrix As Matrix, ByVal matrixName As String, ByVal numElements As Integer, _
ByVal y As Integer)

    ' Set up variables for drawing the array

    ' of points to the screen.
    Dim i As Integer
    Dim x As Single = 20
    Dim j As Single = 200
    Dim myFont As New Font("Arial", 8)
    Dim myBrush As New SolidBrush(Color.Black)

    ' Draw the matrix name to the screen.
    e.Graphics.DrawString(matrixName + ":  ", myFont, myBrush, x, y)

    ' Draw the set of path points and types to the screen.
    For i = 0 To numElements - 1
        e.Graphics.DrawString(matrix.Elements(i).ToString() + ", ", _
        myFont, myBrush, j, y)
        j += 30
    Next i
End Sub

Açıklamalar

Belirtilen sıra ise Prepend, bu Matrix , belirtilen matrisle önceden eklenen bir sırada çarpılır. Belirtilen sıra ise Append, bu Matrix , eklenen sırada belirtilen matrisle çarpılır.