共用方式為


DataSet.CreateDataReader 方法

定義

傳回 DataTableReader,每個 DataTable 有一個結果集,順序與資料表出現在 Tables 集合中的順序相同。

多載

CreateDataReader(DataTable[])

傳回 DataTableReader,每一個 DataTable 有一個結果集。

CreateDataReader()

傳回 DataTableReader,每個 DataTable 有一個結果集,順序與資料表出現在 Tables 集合中的順序相同。

範例

這個範例是主控台應用程式,會建立三 DataTableDataSet實例,並將每個實例新增至 。 此範例會 CreateDataReader 呼叫 方法,並顯示傳 DataTableReader回 的內容。 請注意,中 DataTableReader 結果集的順序是由當做參數傳遞的 DataTable 實例順序所控制。

注意

此範例示範如何使用 的其中一個多載版本 CreateDataReader。 如需其他可能可用的範例,請參閱個別多載主題。

static DataTable customerTable;
static DataTable productTable;
static DataTable emptyTable;

static void Main()
{
    DataSet dataSet = new DataSet();

    // Add some DataTables to the DataSet, including
    // an empty DataTable:
    emptyTable = new DataTable();
    productTable = GetProducts();
    customerTable = GetCustomers();

    dataSet.Tables.Add(customerTable);
    dataSet.Tables.Add(emptyTable);
    dataSet.Tables.Add(productTable);
    TestCreateDataReader(dataSet);

    Console.WriteLine("Press any key to continue.");
    Console.ReadKey();
}

private static void TestCreateDataReader(DataSet dataSet)
{
    // Given a DataSet, retrieve a DataTableReader
    // allowing access to all the DataSet's data.
    // Even though the dataset contains three DataTables,
    // this code will only display the contents of two of them,
    // because the code has limited the results to the
    // DataTables stored in the tables array. Because this
    // parameter is declared using the ParamArray keyword,
    // you could also include a list of DataTable instances
    // individually, as opposed to supplying an array of
    // DataTables, as in this example:
    using (DataTableReader reader =
        dataSet.CreateDataReader(productTable, emptyTable))
    {
        do
        {
            if (!reader.HasRows)
            {
                Console.WriteLine("Empty DataTableReader");
            }
            else
            {
                PrintColumns(reader);
            }
            Console.WriteLine("========================");
        } while (reader.NextResult());
    }
}

private static DataTable GetCustomers()
{
    // Create sample Customers table, in order
    // to demonstrate the behavior of the DataTableReader.
    DataTable table = new DataTable();

    // Create two columns, ID and Name.
    DataColumn idColumn = table.Columns.Add("ID", typeof(int));
    table.Columns.Add("Name", typeof(string));

    // Set the ID column as the primary key column.
    table.PrimaryKey = new DataColumn[] { idColumn };

    table.Rows.Add(new object[] { 1, "Mary" });
    table.Rows.Add(new object[] { 2, "Andy" });
    table.Rows.Add(new object[] { 3, "Peter" });
    table.Rows.Add(new object[] { 4, "Russ" });
    table.AcceptChanges();
    return table;
}

private static DataTable GetProducts()
{
    // Create sample Products table, in order
    // to demonstrate the behavior of the DataTableReader.
    DataTable table = new DataTable();

    // Create two columns, ID and Name.
    DataColumn idColumn = table.Columns.Add("ID", typeof(int));
    table.Columns.Add("Name", typeof(string));

    // Set the ID column as the primary key column.
    table.PrimaryKey = new DataColumn[] { idColumn };

    table.Rows.Add(new object[] { 1, "Wireless Network Card" });
    table.Rows.Add(new object[] { 2, "Hard Drive" });
    table.Rows.Add(new object[] { 3, "Monitor" });
    table.Rows.Add(new object[] { 4, "CPU" });
    table.AcceptChanges();
    return table;
}

private static void PrintColumns(DataTableReader reader)
{
    // Loop through all the rows in the DataTableReader
    while (reader.Read())
    {
        for (int i = 0; i < reader.FieldCount; i++)
        {
            Console.Write(reader[i] + " ");
        }
        Console.WriteLine();
    }
}
Private emptyTable As DataTable
Private customerTable As DataTable
Private productTable As DataTable

Sub Main()
  Dim dataSet As New DataSet
  ' Add some DataTables to the DataSet, including
  ' an empty DataTable:

  emptyTable = New DataTable()
  productTable = GetProducts()
  customerTable = GetCustomers()

  dataSet.Tables.Add(customerTable)
  dataSet.Tables.Add(emptyTable)
  dataSet.Tables.Add(productTable)
  TestCreateDataReader(dataSet)

  Console.WriteLine("Press any key to continue.")
  Console.ReadKey()
End Sub

Private Sub TestCreateDataReader(ByVal dataSet As DataSet)
  ' Given a DataSet, retrieve a DataTableReader
  ' allowing access to all the DataSet's data.
  ' Even though the dataset contains three DataTables,
  ' this code will only display the contents of two of them,
  ' because the code has limited the results to the 
  ' DataTables stored in the tables array. Because this
  ' parameter is declared using the ParamArray keyword, 
  ' you could also include a list of DataTable instances 
  ' individually, as opposed to supplying an array of 
  ' DataTables, as in this example:
  Using reader As DataTableReader = _
      dataSet.CreateDataReader(productTable, emptyTable)
    Do
      If Not reader.HasRows Then
        Console.WriteLine("Empty DataTableReader")
      Else
        PrintColumns(reader)
      End If
      Console.WriteLine("========================")
    Loop While reader.NextResult()
  End Using
End Sub

Private Function GetCustomers() As DataTable
  ' Create sample Customers table, in order
  ' to demonstrate the behavior of the DataTableReader.
  Dim table As New DataTable

  ' Create two columns, ID and Name.
  Dim idColumn As DataColumn = table.Columns.Add("ID", GetType(Integer))
  table.Columns.Add("Name", GetType(String))

  ' Set the ID column as the primary key column.
  table.PrimaryKey = New DataColumn() {idColumn}

  table.Rows.Add(New Object() {1, "Mary"})
  table.Rows.Add(New Object() {2, "Andy"})
  table.Rows.Add(New Object() {3, "Peter"})
  table.Rows.Add(New Object() {4, "Russ"})
  table.AcceptChanges()
  Return table
End Function

Private Function GetProducts() As DataTable
  ' Create sample Products table, in order
  ' to demonstrate the behavior of the DataTableReader.
  Dim table As New DataTable

  ' Create two columns, ID and Name.
  Dim idColumn As DataColumn = table.Columns.Add("ID", GetType(Integer))
  table.Columns.Add("Name", GetType(String))

  ' Set the ID column as the primary key column.
  table.PrimaryKey = New DataColumn() {idColumn}

  table.Rows.Add(New Object() {1, "Wireless Network Card"})
  table.Rows.Add(New Object() {2, "Hard Drive"})
  table.Rows.Add(New Object() {3, "Monitor"})
  table.Rows.Add(New Object() {4, "CPU"})
  table.AcceptChanges()
  Return table
End Function

Private Sub PrintColumns( _
   ByVal reader As DataTableReader)

  ' Loop through all the rows in the DataTableReader.
  Do While reader.Read()
    For i As Integer = 0 To reader.FieldCount - 1
      Console.Write(reader(i).ToString() & " ")
    Next
    Console.WriteLine()
  Loop
End Sub

這個範例會在主控台視窗中顯示下列程式代碼:

備註

為了確保傳DataTableReader回的結果集在 內的順序是DataTableDataSet空的 ,則會以傳DataTableReader回 之 內的空結果集來表示。

CreateDataReader(DataTable[])

來源:
DataSet.cs
來源:
DataSet.cs
來源:
DataSet.cs

傳回 DataTableReader,每一個 DataTable 有一個結果集。

public:
 System::Data::DataTableReader ^ CreateDataReader(... cli::array <System::Data::DataTable ^> ^ dataTables);
public System.Data.DataTableReader CreateDataReader (params System.Data.DataTable[] dataTables);
member this.CreateDataReader : System.Data.DataTable[] -> System.Data.DataTableReader
Public Function CreateDataReader (ParamArray dataTables As DataTable()) As DataTableReader

參數

dataTables
DataTable[]

DataTable 的陣列提供要在 DataTableReader 中傳回的結果集順序。

傳回

DataTableReader,包含一個或多個結果集,對應於包含在來源 DataTable 之中的 DataSet 執行個體。 傳回的結果集的順序是 dataTables 參數所指定的順序。

範例

這個範例是主控台應用程式,會建立三 DataTableDataSet實例,並將每個實例新增至 。 此範例會 CreateDataReader 呼叫 方法,並顯示傳 DataTableReader回 的內容。 請注意,中 DataTableReader 結果集的順序是由當做參數傳遞的 DataTable 實例順序所控制。 此範例會在主控台視窗中顯示結果。

static DataTable customerTable;
static DataTable productTable;
static DataTable emptyTable;

static void Main()
{
    DataSet dataSet = new DataSet();

    // Add some DataTables to the DataSet, including
    // an empty DataTable:
    emptyTable = new DataTable();
    productTable = GetProducts();
    customerTable = GetCustomers();

    dataSet.Tables.Add(customerTable);
    dataSet.Tables.Add(emptyTable);
    dataSet.Tables.Add(productTable);
    TestCreateDataReader(dataSet);

    Console.WriteLine("Press any key to continue.");
    Console.ReadKey();
}

private static void TestCreateDataReader(DataSet dataSet)
{
    // Given a DataSet, retrieve a DataTableReader
    // allowing access to all the DataSet's data.
    // Even though the dataset contains three DataTables,
    // this code will only display the contents of two of them,
    // because the code has limited the results to the
    // DataTables stored in the tables array. Because this
    // parameter is declared using the ParamArray keyword,
    // you could also include a list of DataTable instances
    // individually, as opposed to supplying an array of
    // DataTables, as in this example:
    using (DataTableReader reader =
       dataSet.CreateDataReader(productTable, emptyTable))
    {
        do
        {
            if (!reader.HasRows)
            {
                Console.WriteLine("Empty DataTableReader");
            }
            else
            {
                PrintColumns(reader);
            }
            Console.WriteLine("========================");
        } while (reader.NextResult());
    }
}

private static DataTable GetCustomers()
{
    // Create sample Customers table, in order
    // to demonstrate the behavior of the DataTableReader.
    DataTable table = new DataTable();

    // Create two columns, ID and Name.
    DataColumn idColumn = table.Columns.Add("ID", typeof(int));
    table.Columns.Add("Name", typeof(string));

    // Set the ID column as the primary key column.
    table.PrimaryKey = new DataColumn[] { idColumn };

    table.Rows.Add(new object[] { 1, "Mary" });
    table.Rows.Add(new object[] { 2, "Andy" });
    table.Rows.Add(new object[] { 3, "Peter" });
    table.Rows.Add(new object[] { 4, "Russ" });
    return table;
}

private static DataTable GetProducts()
{
    // Create sample Products table, in order
    // to demonstrate the behavior of the DataTableReader.
    DataTable table = new DataTable();

    // Create two columns, ID and Name.
    DataColumn idColumn = table.Columns.Add("ID", typeof(int));
    table.Columns.Add("Name", typeof(string));

    // Set the ID column as the primary key column.
    table.PrimaryKey = new DataColumn[] { idColumn };

    table.Rows.Add(new object[] { 1, "Wireless Network Card" });
    table.Rows.Add(new object[] { 2, "Hard Drive" });
    table.Rows.Add(new object[] { 3, "Monitor" });
    table.Rows.Add(new object[] { 4, "CPU" });
    return table;
}

private static void PrintColumns(DataTableReader reader)
{
    // Loop through all the rows in the DataTableReader
    while (reader.Read())
    {
        for (int i = 0; i < reader.FieldCount; i++)
        {
            Console.Write(reader[i] + " ");
        }
        Console.WriteLine();
    }
}
Private emptyTable As DataTable
Private customerTable As DataTable
Private productTable As DataTable

Sub Main()
  Dim dataSet As New DataSet
  ' Add some DataTables to the DataSet, including
  ' an empty DataTable:

  emptyTable = New DataTable()
  productTable = GetProducts()
  customerTable = GetCustomers()

  dataSet.Tables.Add(customerTable)
  dataSet.Tables.Add(emptyTable)
  dataSet.Tables.Add(productTable)
  TestCreateDataReader(dataSet)

  Console.WriteLine("Press any key to continue.")
  Console.ReadKey()
End Sub

Private Sub TestCreateDataReader(ByVal dataSet As DataSet)
  ' Given a DataSet, retrieve a DataTableReader
  ' allowing access to all the DataSet's data.
  ' Even though the dataset contains three DataTables,
  ' this code will only display the contents of two of them,
  ' because the code has limited the results to the 
  ' DataTables stored in the tables array. Because this
  ' parameter is declared using the ParamArray keyword, 
  ' you could also include a list of DataTable instances 
  ' individually, as opposed to supplying an array of 
  ' DataTables, as in this example:
  Using reader As DataTableReader = _
    dataSet.CreateDataReader(productTable, emptyTable)
    Do
      If Not reader.HasRows Then
        Console.WriteLine("Empty DataTableReader")
      Else
        PrintColumns(reader)
      End If
      Console.WriteLine("========================")
    Loop While reader.NextResult()
  End Using
End Sub

Private Function GetCustomers() As DataTable
  ' Create sample Customers table, in order
  ' to demonstrate the behavior of the DataTableReader.
  Dim table As New DataTable

  ' Create two columns, ID and Name.
  Dim idColumn As DataColumn = table.Columns.Add("ID", GetType(Integer))
  table.Columns.Add("Name", GetType(String))

  ' Set the ID column as the primary key column.
  table.PrimaryKey = New DataColumn() {idColumn}

  table.Rows.Add(New Object() {1, "Mary"})
  table.Rows.Add(New Object() {2, "Andy"})
  table.Rows.Add(New Object() {3, "Peter"})
  table.Rows.Add(New Object() {4, "Russ"})
  Return table
End Function

Private Function GetProducts() As DataTable
  ' Create sample Products table, in order
  ' to demonstrate the behavior of the DataTableReader.
  Dim table As New DataTable

  ' Create two columns, ID and Name.
  Dim idColumn As DataColumn = table.Columns.Add("ID", GetType(Integer))
  table.Columns.Add("Name", GetType(String))

  ' Set the ID column as the primary key column.
  table.PrimaryKey = New DataColumn() {idColumn}

  table.Rows.Add(New Object() {1, "Wireless Network Card"})
  table.Rows.Add(New Object() {2, "Hard Drive"})
  table.Rows.Add(New Object() {3, "Monitor"})
  table.Rows.Add(New Object() {4, "CPU"})
  Return table
End Function

Private Sub PrintColumns( _
   ByVal reader As DataTableReader)

  ' Loop through all the rows in the DataTableReader.
  Do While reader.Read()
    For i As Integer = 0 To reader.FieldCount - 1
      Console.Write(reader(i).ToString() & " ")
    Next
    Console.WriteLine()
  Loop
End Sub

備註

為了確保所傳DataTableReaderDataTable回的結果集在 內DataSet的順序是空的 ,則會以傳DataTableReader回 之 內的空結果集表示。 由於此多載版本可讓您提供實例清單 DataTable 做為參數,因此您可以指定結果集出現在傳 DataTableReader回 中的順序。

另請參閱

適用於

CreateDataReader()

來源:
DataSet.cs
來源:
DataSet.cs
來源:
DataSet.cs

傳回 DataTableReader,每個 DataTable 有一個結果集,順序與資料表出現在 Tables 集合中的順序相同。

public:
 System::Data::DataTableReader ^ CreateDataReader();
public System.Data.DataTableReader CreateDataReader ();
member this.CreateDataReader : unit -> System.Data.DataTableReader
Public Function CreateDataReader () As DataTableReader

傳回

DataTableReader,包含一個或多個結果集,對應於包含在來源 DataTable 之中的 DataSet 執行個體。

範例

下列範例會建立三 DataTableDataSet實例,並將每個實例新增至 。 此範例接著會將 填滿 DataSet 的 傳遞至呼叫 CreateDataReader 方法的程式,然後繼續逐一查看 內 DataTableReader含的所有結果集。 此範例會在主控台視窗中顯示結果。

static void Main()
{
    DataSet dataSet = new DataSet();
    // Add some DataTables to the DataSet, including
    // an empty DataTable:
    dataSet.Tables.Add(GetCustomers());
    dataSet.Tables.Add(new DataTable());
    dataSet.Tables.Add(GetProducts());
    TestCreateDataReader(dataSet);

    Console.WriteLine("Press any key to continue.");
    Console.ReadKey();
}

private static void TestCreateDataReader(DataSet dataSet)
{
    // Given a DataSet, retrieve a DataTableReader
    // allowing access to all the DataSet's data:
    using (DataTableReader reader = dataSet.CreateDataReader())
    {
        do
        {
            if (!reader.HasRows)
            {
                Console.WriteLine("Empty DataTableReader");
            }
            else
            {
                PrintColumns(reader);
            }
            Console.WriteLine("========================");
        } while (reader.NextResult());
    }
}

private static DataTable GetCustomers()
{
    // Create sample Customers table, in order
    // to demonstrate the behavior of the DataTableReader.
    DataTable table = new DataTable();

    // Create two columns, ID and Name.
    DataColumn idColumn = table.Columns.Add("ID", typeof(int));
    table.Columns.Add("Name", typeof(string));

    // Set the ID column as the primary key column.
    table.PrimaryKey = new DataColumn[] { idColumn };

    table.Rows.Add(new object[] { 1, "Mary" });
    table.Rows.Add(new object[] { 2, "Andy" });
    table.Rows.Add(new object[] { 3, "Peter" });
    table.Rows.Add(new object[] { 4, "Russ" });
    return table;
}

private static DataTable GetProducts()
{
    // Create sample Products table, in order
    // to demonstrate the behavior of the DataTableReader.
    DataTable table = new DataTable();

    // Create two columns, ID and Name.
    DataColumn idColumn = table.Columns.Add("ID", typeof(int));
    table.Columns.Add("Name", typeof(string));

    // Set the ID column as the primary key column.
    table.PrimaryKey = new DataColumn[] { idColumn };

    table.Rows.Add(new object[] { 1, "Wireless Network Card" });
    table.Rows.Add(new object[] { 2, "Hard Drive" });
    table.Rows.Add(new object[] { 3, "Monitor" });
    table.Rows.Add(new object[] { 4, "CPU" });
    return table;
}

private static void PrintColumns(DataTableReader reader)
{
    // Loop through all the rows in the DataTableReader
    while (reader.Read())
    {
        for (int i = 0; i < reader.FieldCount; i++)
        {
            Console.Write(reader[i] + " ");
        }
        Console.WriteLine();
    }
}
Sub Main()
  Dim dataSet As New DataSet
  ' Add some DataTables to the DataSet, including
  ' an empty DataTable:
  dataSet.Tables.Add(GetCustomers())
  dataSet.Tables.Add(New DataTable())
  dataSet.Tables.Add(GetProducts())
  TestCreateDataReader(dataSet)

  Console.WriteLine("Press any key to continue.")
  Console.ReadKey()
End Sub

Private Sub TestCreateDataReader(ByVal dataSet As DataSet)
  ' Given a DataSet, retrieve a DataTableReader
  ' allowing access to all the DataSet's data:
  Using reader As DataTableReader = dataSet.CreateDataReader()
    Do
      If Not reader.HasRows Then
        Console.WriteLine("Empty DataTableReader")
      Else
        PrintColumns(reader)
      End If
      Console.WriteLine("========================")
    Loop While reader.NextResult()
  End Using
End Sub

Private Function GetCustomers() As DataTable
  ' Create sample Customers table, in order
  ' to demonstrate the behavior of the DataTableReader.
  Dim table As New DataTable

  ' Create two columns, ID and Name.
  Dim idColumn As DataColumn = table.Columns.Add("ID", GetType(Integer))
  table.Columns.Add("Name", GetType(String))

  ' Set the ID column as the primary key column.
  table.PrimaryKey = New DataColumn() {idColumn}

  table.Rows.Add(New Object() {1, "Mary"})
  table.Rows.Add(New Object() {2, "Andy"})
  table.Rows.Add(New Object() {3, "Peter"})
  table.Rows.Add(New Object() {4, "Russ"})
  Return table
End Function

Private Function GetProducts() As DataTable
  ' Create sample Products table, in order
  ' to demonstrate the behavior of the DataTableReader.
  Dim table As New DataTable

  ' Create two columns, ID and Name.
  Dim idColumn As DataColumn = table.Columns.Add("ID", GetType(Integer))
  table.Columns.Add("Name", GetType(String))

  ' Set the ID column as the primary key column.
  table.PrimaryKey = New DataColumn() {idColumn}

  table.Rows.Add(New Object() {1, "Wireless Network Card"})
  table.Rows.Add(New Object() {2, "Hard Drive"})
  table.Rows.Add(New Object() {3, "Monitor"})
  table.Rows.Add(New Object() {4, "CPU"})
  Return table
End Function

Private Sub PrintColumns( _
   ByVal reader As DataTableReader)

  ' Loop through all the rows in the DataTableReader.
  Do While reader.Read()
    For i As Integer = 0 To reader.FieldCount - 1
      Console.Write(reader(i).ToString() & " ")
    Next
    Console.WriteLine()
  Loop
End Sub

備註

為了確保傳回 DataTableReader之 內的結果集順序,如果 DataTable 內的 DataSet 是空的,則會以傳 DataTableReader回 之 內的空結果集表示。

另請參閱

適用於