模块化数据中心集成概述Modular Datacenter integration overview

本文介绍 Azure 模块式 Datacenter (MDC) 集成的端到端过程,从购买到后期部署。This article describes the end-to-end process for Azure Modular Datacenter (MDC) integration, from purchasing to post deployment. 集成是客户与 Microsoft 之间的协作项目。The integration is a collaborative project between the customer and Microsoft. 以下部分介绍项目时间线的不同阶段以及项目成员的特定步骤。The following sections cover different phases of the project timeline and specific steps for project members.

简介Introduction

下表列出了部署的各个阶段所需的内容。The following table lists what can be expected during the various phases of deployment.

参与者Participant 订购流程Order process 部署前Predeployment 集成,验证,传输Integration, validation, transport 现场部署Onsite deployment 后期部署Post deployment
MicrosoftMicrosoft 传递给 US 位置的信号。Signal to delivery to US location. 提供所需的工具和文档来收集数据中心需求。Provide required tooling and documentation to collect datacenter requirements. -验证配置项目并检查验证结果。- Validate configuration artifacts and check validation results.
-确保已提供硬件。- Ensure hardware is delivered.
-机架和堆栈。- Rack and stack.
-网络集成。- Network integration.
-Azure Stack 中心部署。- Azure Stack Hub deployment.
-交付给客户。- Hand off to customer.
注册和 Azure Stack 集线器 Marketplace 联合。Registration and Azure Stack Hub Marketplace syndication.
客户Customer 采购信号。Signal purchase. -在部署工作表中填写网络详细信息。- Fill out network details in deployment worksheet.
-收集证书。- Collect certificates.
-获取 Azure Active Directory (Azure AD) 帐户。- Obtain Azure Active Directory (Azure AD) accounts.
-运行提供的任何验证工具。- Run any validation tooling provided.
确保站点已准备好网络、电源和冷却系统必备组件。Ensure the site is ready with network, power, and cooling prerequisites. -准备好部署配置项目。- Be prepared with deployment configuration artifacts.
-确保客户的网络工程师可用。- Ensure customer's network engineer is available.

订购流程Order process

你的组织将与 Microsoft 合作,以便为分配的系统数设置订单。Your organization will work with Microsoft to place an order for an allocated number of systems. 订购订单后,Microsoft 会将 MDC 交付到美国位置。After you place the order, Microsoft will deliver MDC to your US location. Microsoft 将确保满足所有安全供应链要求。Microsoft will ensure that all secure supply chain requirements are met.

硬件交付Hardware delivery

Microsoft 将与你合作,以确保所有必需的硬件在给定的分配时间内到达美国位置。Microsoft will work with you to ensure all required hardware arrives at the US location within the allocated time given.

重要 的是,所有先决条件数据都已锁定,并 在现场 Microsoft 部署工程师到达部署解决方案之前可用。It's crucial that all prerequisite data is locked and available before the onsite Microsoft deployment engineer arrives to deploy the solution.

  • 部署工作表填写了所有数据。Deployment worksheet has all data filled out.
  • 必须验证并准备好所有证书。All certificates must be validated and ready.
  • 必须确定区域名。Region name must be decided on.
  • 已确定和完成所有网络集成参数。All network integration parameters are finalized.

提示

如果上述任何信息发生了更改,请务必与内部组织合作,确保在现场部署工程师到达之前更新信息。If any of this information has changed, make sure to work with your internal organization to ensure the information is updated prior to the arrival of the onsite deployment engineer. 更新信息将会阻止部署过程中出现任何延迟。Updating your information will prevent any delays in the deployment process.

部署前Predeployment

决定如何将 Azure Stack Hub 集成到数据中心。You decide how to integrate Azure Stack Hub into your datacenter. Microsoft 发布了部署工作表,可指导你收集成功集成到数据中心所需的所有必要信息。Microsoft has published a deployment worksheet that guides you through gathering all necessary information needed to integrate successfully into your datacenter. 此外,在部署时需要一组特定的证书。In addition, a certain set of certificates is required at the time of deployment. 为了帮助你获取这些证书,Microsoft 提供了 Azure Stack 中心就绪检查程序。To help you obtain these certificates, Microsoft provides you with the Azure Stack Hub Readiness Checker. 此工具将帮助你创建 (Csr) 提供给内部证书颁发机构的证书签名请求。This tool will help you create Certificate Signing Requests (CSRs) to provide to your internal certificate authority.

重要

验证所有先决条件,以帮助防止部署延迟。All prerequisites are validated to help prevent deployment delays. 验证先决条件可能需要一些时间,并且需要组织中的不同部门进行协调和数据收集。Verifying prerequisites can take time and require coordination and data gathering from different departments within your organization.

需选择以下项:You'll choose the following items:

  • Azure Stack Hub 连接模型和标识提供者。Azure Stack Hub connection model and identity provider. 可以选择在已连接到 Internet(和 Azure)时或断开连接时部署 Azure Stack Hub。You can choose to deploy Azure Stack Hub either connected to the internet (and to Azure) or disconnected. 若要从 Azure Stack 中心获得最大优势,包括混合方案,需要将连接到 Azure。To get the most benefit from Azure Stack Hub, including hybrid scenarios, you want to deploy connected to Azure. 选择 Active Directory 联合身份验证服务 (AD FS) 或 Azure AD 是在部署时必须进行的一次性决定。Choosing Active Directory Federation Services (AD FS) or Azure AD is a one-time decision that you must make at deployment time. 以后,除非重新部署整个系统,否则将无法更改标识提供者。You can't change your identity provider later without redeploying the entire system.
  • 网络集成。Network integration. 网络集成对于部署、操作和管理 Azure Stack Hub 系统至关重要。Network integration is crucial for deployment, operation, and management of Azure Stack Hub systems. 需要考虑到多种因素才能确保 Azure Stack Hub 解决方案具有复原能力,并提供一个高可用性物理基础设施来支持其操作。There are several considerations that go into ensuring the Azure Stack Hub solution is resilient and has a highly available physical infrastructure to support its operations.
  • 防火墙集成。Firewall integration. 建议 使用防火墙 来帮助保护 Azure Stack 中心的安全。We recommend that you use a firewall to help secure Azure Stack Hub. 防火墙可帮助防止 DDoS 攻击、入侵检测和内容检查。Firewalls can help prevent DDoS attacks, intrusion detection, and content inspection. 请注意,防火墙可能会成为 Azure 存储服务的吞吐量瓶颈。Note that firewalls can become a throughput bottleneck for Azure storage services.
  • 证书要求。Certificate requirements. 必须在现场工程师抵达数据中心进行部署之前准备好全部所需的证书It's critical that all required certificates are available before an onsite engineer arrives at your datacenter for deployment.

在通过 "部署" 工作表收集所有先决条件信息后,Microsoft 将确保验证所有验证工具是否已运行,并协助你可能遇到的任何问题。After all the prerequisite information is gathered through the deployment worksheet, Microsoft will ensure that we verify all validation tools have been run and assist with any further questions that you might have.

现场部署Onsite deployment

若要部署 Azure Stack 中心,可以使用 Microsoft 部署工程师来启动部署。To deploy Azure Stack Hub, a Microsoft deployment engineer will be present to kick off the deployment. 我们还需要在现场部署过程中提供组织的网络工程师。We also require a network engineer from your organization to be available during the onsite deployment.

以下检查是部署体验期间现场工程师应执行的操作:The following checks are what you should expect from the onsite engineer during the deployment experience:

  • 取消装箱和清点硬件。Unbox and inventory hardware.
  • 接通解决方案的电源和电源。Connect power and power on the solution.
  • 验证物理硬件运行状况。Validate physical hardware health.
  • 检查所有布线和边界连接,确保解决方案正确定位在一起,且符合要求。Check all the cabling and border connectivity to ensure the solution is properly put together and meets your requirements.
  • 配置解决方案硬件生命周期主机 (HLH) 。Configure the solution Hardware Lifecycle Host (HLH).
  • 集成数据中心网络。Integrate the datacenter network.
  • 检查以确保所有物理硬件设置都正确。Check to make sure all physical hardware settings are correct.
  • 确保所有组件的固件使用解决方案批准的最新版本。Make sure firmware for all components is at the latest approved version by the solution.
  • 开始部署。Start the deployment.

后期部署Post deployment

在将解决方案移交给客户之前,必须先执行几个步骤。Several steps must be performed by the Microsoft deployment engineer before the solution is handed off to the customer. 在此阶段,验证非常重要,它可以确保系统部署正确且运行正常。In this phase, validation is important to ensure the system is deployed and performing correctly.

Microsoft 部署工程师应执行的操作:Actions that should be taken by the Microsoft deployment engineer:

后续步骤Next steps

模块化数据中心部署概述Modular Datacenter deployment overview