添加 SIP 地址Add a SIP address

当您启用 UM 的用户,并将它们链接到 SIP URI 拨号计划时,创建两个 EUM 代理地址。一个包含用户的分机号码,另一个包含用户的 SIP 地址。用户连接到 Outlook Voice Access 号码时使用的分机号码。When you enable a user for UM and link them to a SIP URI dial plan, two EUM proxy addresses are created. One contains the user's extension number and the other contains a SIP address for the user. The extension number is used when the user calls in to an Outlook Voice Access number.

您正在集成 UM 和 Microsoft Office Communications Server 2007 R2 或 Microsoft Lync Server 时使用的 SIP URI 拨号计划和 SIP 地址。Communications Server 或 Lync Server 使用的 SIP 地址路由传入呼叫,并向用户发送语音邮件。默认情况下,由 UM 的 SIP 地址将使用 Communications Server 或 Lync Server 的 SIP 地址。SIP URI dial plans and SIP addresses are used when you're integrating UM and Microsoft Office Communications Server 2007 R2 or Microsoft Lync Server. The SIP address is used by Communications Server or Lync Server to route incoming calls and send voice mail to the user. By default, the SIP address that's used by UM will be the SIP address that's used by Communications Server or Lync Server.

添加时用户已启用 um 的主 SIP 地址中都列示为主 EUM 代理地址。如果已删除的主 SIP 地址,您将添加包含用户的 SIP 地址的第一个 EUM 代理地址将列为主 EUM 代理地址。您将添加任何其他 SIP 地址中都列示为辅助 EUM 代理地址。当添加辅助 SIP 地址后时,呼叫者可以将用户的语音邮件保留在用户登录到使用 SIP 地址的 SIP 终结点。所有语音邮件将传递到同一个用户的邮箱中。The primary SIP address you added when the user was enabled for UM will be listed as the primary EUM proxy address. If the primary SIP address was removed, the first EUM proxy address you add that contains the user's SIP address will be listed as the primary EUM proxy address. Any additional SIP addresses you add will be listed as secondary EUM proxy addresses. When secondary SIP addresses are added, callers can leave voice mail for the user at SIP endpoints that the user is signed in to using the SIP addresses. All the voice messages will be delivered to the same user's mailbox.

您可以使用 EAC 或命令行管理程序添加主索引器还是辅助用户 SIP 地址。可以使用在 EAC 中的用户的邮箱上的电子邮件地址页添加主或第二的 SIP 地址。不能使用 EAC 中的UM 邮箱页添加主或第二的 SIP 地址。You can use the EAC or the Shell to add a primary or a secondary SIP address for a user. You can use the Email Address page on the user's mailbox in the EAC to add a primary or secondary SIP address. You can't use the UM Mailbox page in the EAC to add a primary or secondary SIP address.

您可以通过在命令行管理程序中使用Get-ummailbox cmdlet 或Get-mailbox cmdlet 查看用户的主要和辅助 SIP 地址。You can view the primary and secondary SIP addresses for a user by using the Get-UMMailbox cmdlet or the Get-Mailbox cmdlet in the Shell.

有关与已启用语音邮件的用户相关的其他管理任务,请参阅声音已启用邮件的用户的过程For additional management tasks related to users who are enabled for voice mail, see Voice mail-enabled user procedures.

在开始之前,您需要知道什么?What do you need to know before you begin?

  • 估计完成时间:3 分钟。Estimated time to complete: 3 minutes.

  • 您需要执行此过程之前为其分配权限。若要查看所需的权限,请参阅Messaging Permissions主题中的"UM 邮箱"条目。You need to be assigned permissions before you can perform this procedure or procedures. To see what permissions you need, see the "UM mailboxes" entry in the Unified Messaging Permissions topic.

  • 在执行这些过程之前,请确认已创建一个 UM SIP URI 拨号计划。有关详细步骤,请参阅创建 UM 拨号计划Before you perform these procedures, confirm that a SIP URI UM dial plan has been created. For detailed steps, see Create a UM dial plan.

  • 在执行这些步骤之前,先确认已创建 UM 邮箱策略。有关详细步骤,请参阅创建 UM 邮箱策略Before you perform these procedures, confirm that a UM mailbox policy has been created. For detailed steps, see Create a UM mailbox policy.

  • 在执行这些过程之前,请确认的现有用户启用了 UM 并链接到 SIP URI 拨号计划。有关详细步骤,请参阅启用语音邮件的用户Before you perform these procedures, confirm that the existing user is enabled for UM and linked to a SIP URI dial plan. For detailed steps, see Enable a user for voice mail.

  • 在执行这些步骤之前,请确认将分配给用户的 SIP 地址有效,且格式正确。Before you perform these procedures, confirm that the SIP address that will be assigned to the user is valid and formatted correctly.

  • 若要了解可能适用于此主题中过程的键盘快捷键,请参阅 Exchange 管理中心内的键盘快捷键For information about keyboard shortcuts that may apply to the procedures in this topic, see Keyboard shortcuts in the Exchange admin center.

提示

遇到问题了吗?请在 Exchange 论坛中寻求帮助。 请访问以下论坛:Exchange ServerExchange OnlineExchange Online Protection。.Having problems? Ask for help in the Exchange forums. Visit the forums at Exchange Server,Exchange Online, or Exchange Online Protection..

您想执行什么操作?What do you want to do?

使用 EAC 添加主 SIP 地址或辅助 SIP 地址Use the EAC to add a primary or secondary SIP address

  1. 在 EAC 中,导航到收件人 > 邮箱In the EAC, navigate to Recipients > Mailboxes.

  2. 在列表视图中,选择您要添加的 SIP 地址的邮箱,然后单击编辑编辑图标In the list view, select the mailbox for which you want to add a SIP address, and then click EditEdit icon.

  3. 用户邮箱页上,在电子邮件地址下单击添加添加图标On the User Mailbox page, under Email address, click AddAdd Icon.

  4. 新建电子邮件地址页上,选择EUM ,然后在地址/扩展名框中,输入新的 SIP 地址为用户。On the New email address page, select EUM and, in the Address/Extension box, enter the new SIP address for the user.

  5. 新建电子邮件地址页上的在拨号计划,下,单击浏览以选择 SIP URI 拨号计划,,然后单击确定On the New email address page, under Dial plan, click Browse to select the SIP URI dial plan, and then click OK.

  6. 键入所需的项目保留天数。Click Save.

使用命令行管理程序添加 SIP 地址Use the Shell to add a SIP address

此示例为启用了 UM 的用户 Tony Smith 添加 SIP 地址。This example adds a SIP address for Tony Smith, a UM-enabled user.

备注

添加的 SIP 地址,使用命令行管理程序之前,您需要确定您要添加的 EUM 代理地址的位置。若要确定的位置,请使用 $mbx。EmailAddresses命令。在列表中的第一个代理地址将为 0。Before you add a SIP address using the Shell, you need to determine the position of the EUM proxy address that you want to add. To determine the position, use the $mbx.EmailAddresses command. The first proxy address in the list will be 0.

$mbx=Get-Mailbox tony.smith
$mbx.EmailAddresses +="eum:tsmit@contoso.com;phone-context=MyDialPlan.contoso.com"
Set-Mailbox tony.smith -EmailAddresses $mbx.EmailAddresses