Set-CMDistributionPoint
配置分发点。
语法
Set-CMDistributionPoint
[-EnableMaintenanceMode <Boolean>]
[-AddBoundaryGroupName <String[]>]
[-AddMacAddressForRespondingPxeRequest <String[]>]
[-AllowFallbackForContent <Boolean>]
[-AllowPreStaging <Boolean>]
[-AllowProxyTraffic <Boolean>]
[-AllowPxeResponse <Boolean>]
[-CertificateExpirationTimeUtc <DateTime>]
[-CertificatePassword <SecureString>]
[-CertificatePath <String>]
[-ClearMacAddressForRespondingPxeRequest]
[-ClientCommunicationType <ComputerCommunicationType>]
[-ClientConnectionType <ClientConnectionTypes>]
[-ClientTransferRate <NetworkProfile>]
[-ContentMonitoringPriority <Priority>]
[-ContentValidationSchedule <IResultObject>]
[-Description <String>]
[-EnableAnonymous <Boolean>]
[-EnableBranchCache <Boolean>]
[-EnableContentValidation <Boolean>]
[-EnableLedbat <Boolean>]
[-EnableMulticast <Boolean>]
[-EnableNonWdsPxe <Boolean>]
[-EnablePullDP <Boolean>]
[-EnablePxe <Boolean>]
[-EnableScheduledMulticast <Boolean>]
[-EnableUnknownComputerSupport <Boolean>]
[-EndIPAddress <String>]
[-EndUdpPort <Int32>]
[-Force]
[-InputObject] <IResultObject>
[-KeepWds <Boolean>]
[-MacAddressForRespondingPxeRequest <String[]>]
[-MinimumSessionSize <Int32>]
[-MulticastMaximumClientCount <Int32>]
[-PassThru]
[-PxePassword <SecureString>]
[-PxeServerResponseDelaySec <Int32>]
[-ReassignSiteCode <String>]
[-RemoveBoundaryGroupName <String[]>]
[-RemoveMacAddressForRespondingPxeRequest <String[]>]
[-RespondToAllNetwork]
[-SessionStartDelayMins <Int32>]
[-SourceDistributionPoint <String[]>]
[-SourceDPRank <Int32[]>]
[-StartIPAddress <String>]
[-StartUdpPort <Int32>]
[-UseAnyRangeIP]
[-UseComputerAccount]
[-UserDeviceAffinity <UserDeviceAffinityType>]
[-UserName <String>]
[-EnableDoinc <Boolean>]
[-DiskSpaceUnit <DiskSpaceEnum>]
[-DiskSpaceDoinc <Int32>]
[-LocalDriveDoinc <String>]
[-RetainDoincCache <Boolean>]
[-AgreeDoincLicense <Boolean>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMDistributionPoint
[-EnableMaintenanceMode <Boolean>]
[-AddBoundaryGroupName <String[]>]
[-AddMacAddressForRespondingPxeRequest <String[]>]
[-AllowFallbackForContent <Boolean>]
[-AllowPreStaging <Boolean>]
[-AllowProxyTraffic <Boolean>]
[-AllowPxeResponse <Boolean>]
[-CertificateExpirationTimeUtc <DateTime>]
[-CertificatePassword <SecureString>]
[-CertificatePath <String>]
[-ClearMacAddressForRespondingPxeRequest]
[-ClientCommunicationType <ComputerCommunicationType>]
[-ClientConnectionType <ClientConnectionTypes>]
[-ClientTransferRate <NetworkProfile>]
[-ContentMonitoringPriority <Priority>]
[-ContentValidationSchedule <IResultObject>]
[-Description <String>]
[-EnableAnonymous <Boolean>]
[-EnableBranchCache <Boolean>]
[-EnableContentValidation <Boolean>]
[-EnableLedbat <Boolean>]
[-EnableMulticast <Boolean>]
[-EnableNonWdsPxe <Boolean>]
[-EnablePullDP <Boolean>]
[-EnablePxe <Boolean>]
[-EnableScheduledMulticast <Boolean>]
[-EnableUnknownComputerSupport <Boolean>]
[-EndIPAddress <String>]
[-EndUdpPort <Int32>]
[-Force]
[-KeepWds <Boolean>]
[-MacAddressForRespondingPxeRequest <String[]>]
[-MinimumSessionSize <Int32>]
[-MulticastMaximumClientCount <Int32>]
[-PassThru]
[-PxePassword <SecureString>]
[-PxeServerResponseDelaySec <Int32>]
[-ReassignSiteCode <String>]
[-RemoveBoundaryGroupName <String[]>]
[-RemoveMacAddressForRespondingPxeRequest <String[]>]
[-RespondToAllNetwork]
[-SessionStartDelayMins <Int32>]
[-SiteCode <String>]
[-SiteSystemServerName] <String>
[-SourceDistributionPoint <String[]>]
[-SourceDPRank <Int32[]>]
[-StartIPAddress <String>]
[-StartUdpPort <Int32>]
[-UseAnyRangeIP]
[-UseComputerAccount]
[-UserDeviceAffinity <UserDeviceAffinityType>]
[-UserName <String>]
[-EnableDoinc <Boolean>]
[-DiskSpaceUnit <DiskSpaceEnum>]
[-DiskSpaceDoinc <Int32>]
[-LocalDriveDoinc <String>]
[-RetainDoincCache <Boolean>]
[-AgreeDoincLicense <Boolean>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] 说明
Set-CMDistributionPoint cmdlet 修改站点系统服务器上的分发点。
注意
从Configuration Manager站点驱动器运行Configuration Manager cmdlet，例如 PS XYZ:\>。 有关详细信息，请参阅 入门。
示例
示例 1：设置分发点的属性
第一个命令获取名为 MySiteSys_11310.Contoso.com 的站点系统服务器的分发点对象。 然后，它将 对象存储在 $DP 变量中。 第二个命令修改存储在该变量中的分发点对象。
$DP = Get-CMDistributionPoint -SiteSystemServerName "MySiteSys_11310.Contoso.com"
Set-CMDistributionPoint -InputObject $DP -AllowFallbackForContent $True -AllowPreStaging $True -AllowPxeResponse $False -ClientCommunicationType Http -ClientConnectionType Internet -ContentMonitoringPriority High示例 2：将分发点重新分配到新站点
以下示例将 mydp 服务器从站点 ABC 重新分配到站点 XYZ。
Set-CMDistributionPoint -SiteSystemServerName "MyDP.TestDOM.net" -SiteCode "ABC" -ReassignSiteCode "XYZ"示例 3：启用 Microsoft 连接缓存
第一个命令获取分发点对象，并将其存储在变量中。 它通过管道传递该对象，以启用连接缓存并配置其他相关设置。
$dp = Get-CMDistributionPoint -SiteSystemServerName "dp01.contoso.com"
$dp | Set-CMDistributionPoint -RetainDoincCache $true -EnableDoinc $true -AgreeDoincLicense $true
$dp | Set-CMDistributionPoint -LocalDriveDoinc "Z:" -DiskSpaceDoinc 9000 -DiskSpaceUnit GB参数
-AddBoundaryGroupName
按名称将边界组数组添加到分发点。
| Type: | String[] |
| Aliases: | AddBoundaryGroupNames |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AddMacAddressForRespondingPxeRequest
添加一个 MAC 地址数组，用于响应已启用 PXE 的分发点的 PXE 请求。
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AgreeDoincLicense
使用 EnableDoinc 参数时，请将此参数设置为 $true 以接受 Microsoft 连接的缓存服务器许可条款。 有关详细信息，请参阅 Configuration Manager 中的 Microsoft 联网缓存。
如果已同意许可条款，则无需包含此参数。 当不必要地包含此警告时，会看到此警告：The parameter 'AgreeDoincLicense' has been ignored. Reason: Once the license terms agreement is selected, it will be grayed out and never uncheck it.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AllowFallbackForContent
指示当其他站点系统不可用时，与站点系统关联的边界组外部的客户端是否可以回退并使用此站点系统作为内容的源位置。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AllowPreStaging
指示是否为预留内容启用分发点。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AllowProxyTraffic
允许站点系统在连接到 Internet 时使用代理服务器。
| Type: | Boolean |
| Aliases: | EnableCloudGateway |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AllowPxeResponse
指示分发点是否可以响应 PXE 请求。
| Type: | Boolean |
| Aliases: | AllowRespondIncomingPxeRequest |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CertificateExpirationTimeUtc
指定自签名证书过期的日期和时间。
| Type: | DateTime |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CertificatePassword
为 CertificatePath 中指定的 PKI 客户端证书指定安全字符串密码。
| Type: | SecureString |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CertificatePath
指定要为 HTTPS 通信导入的 PKI 客户端证书的路径。 将 CertificatePassword 参数用于证书的密码。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ClearMacAddressForRespondingPxeRequest
添加此参数可删除分发点用于响应 PXE 请求的 MAC 地址数组。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ClientCommunicationType
指定客户端或设备与分发点的通信方式。 如果指定 Https，请使用 CertificatePath 和 CertificatePassword 参数来指定要使用的 PKI 证书。
| Type: | ComputerCommunicationType |
| Accepted values: | Http, Https |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ClientConnectionType
指定客户端连接类型。
| Type: | ClientConnectionTypes |
| Accepted values: | Intranet, Internet, InternetAndIntranet |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ClientTransferRate
指定客户端传输速率。
| Type: | NetworkProfile |
| Accepted values: | None, ProfileCustom, Profile10Mbps, Profile100Mbps, Profile1Gbps |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
提示你在运行 cmdlet 之前进行确认。
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ContentMonitoringPriority
指定内容监视优先级。
| Type: | Priority |
| Accepted values: | Lowest, Low, Medium, High, Highest |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ContentValidationSchedule
如果使用 EnableContentValidation 参数，请使用此参数指定分发点验证内容时的计划。 若要创建计划令牌对象，请使用 New-CMSchedule cmdlet。
| Type: | IResultObject |
| Aliases: | ValidateContentSchedule |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Description
指定分发点的可选说明。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableWildcardHandling
此参数将通配符视为文本字符值。 不能将其与 ForceWildcardHandling 组合使用。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DiskSpaceDoinc
使用 EnableDoinc 参数时，使用此参数可指定要用于 Microsoft 连接缓存的磁盘空间量。 使用 DiskSpaceUnit 参数确定此值是磁盘空间（以 GB 为单位）还是百分比值。
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DiskSpaceUnit
将此参数与 DiskSpaceDoinc 一起使用，以确定该值是磁盘空间（以 GB 为单位）还是百分比值。
| Type: | DiskSpaceEnum |
| Accepted values: | GB, Percentage |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableAnonymous
指示分发点允许从Configuration Manager客户端到内容库的匿名连接。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableBranchCache
指示允许使用 Windows BranchCache 的客户端从此本地分发点下载内容。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableContentValidation
指示为此分发点启用了内容验证。 使用 ContentValidationSchedule 参数指定计划。
| Type: | Boolean |
| Aliases: | EnableValidateContent |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableDoinc
将此参数设置为 ， $true 使此分发点能够用作 Microsoft 连接的缓存服务器。 有关详细信息，请参阅 Configuration Manager 中的 Microsoft 联网缓存。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableLedbat
通过 Windows LEDBAT 启用分发点以使用网络拥塞控制。 此功能可以调整下载速度以使用未使用的网络带宽。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableMaintenanceMode
将此参数设置为 $true 以启用 维护模式。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableMulticast
为分发点启用多播。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableNonWdsPxe
在分发点上启用Configuration Manager PXE 响应程序。 在没有 Windows 部署服务 (WDS) 的情况下启用 PXE 响应方时，Configuration Manager在分发点上安装其 PXE 响应程序服务。
有关详细信息，请参阅 在分发点上启用 PXE。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnablePullDP
设置为 $True时，分发点可以从其他分发点拉取内容。 将此参数与 SourceDPRank 和 SourceDistributionPoint 参数一起使用。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnablePxe
在分发点上启用 PXE。 启用 PXE 时，Configuration Manager在服务器上安装 Windows 部署服务 (WDS) （如果尚未安装）。 WDS 是支持 PXE 启动以通过网络安装 Windows 映像的服务。
| Type: | Boolean |
| Aliases: | EnablePxeSupport |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableScheduledMulticast
指示是否可以计划何时Configuration Manager从分发点部署 OS 映像。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableUnknownComputerSupport
启用对未知计算机的支持。 未知计算机是尚未发现Configuration Manager的设备。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EndIPAddress
指定Configuration Manager用于将数据发送到客户端的多播地址范围内的结束 IP 地址。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EndUdpPort
指定Configuration Manager用于将数据发送到客户端的多播 UDP 端口范围内的结束 UDP 端口。
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Force
使用此参数可以添加重复的证书，而无需请求确认。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ForceWildcardHandling
此参数处理通配符，并可能导致意外行为， (不建议) 。 不能将其与 DisableWildcardHandling 组合使用。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InitialMPForLookup
此参数需要一个字符串，该字符串表示由符号 *分隔的不同查找 MP。 根据 DP 的站点代码筛选掉 MP，如果 MP 的站点代码不同，则会引发错误。
- 如果 DP 已启用首选 MP，则 -InitialMPForLookup 接受 MP 字符串。
- 如果将 PreferredMPEnabled 设置为 disabled，则不需要传入 -InitialMPForLookup。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InputObject
指定要配置的分发点对象。 若要获取此对象，请使用 Get-CMDistributionPoint cmdlet。
| Type: | IResultObject |
| Aliases: | DistributionPoint |
| Position: | 0 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-KeepWds
指示分发点是将 Windows 部署服务 (WDS) ，还是在禁用 PXE 时将其删除。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-LocalDriveDoinc
使用 EnableDoinc 参数时，请使用此参数选择要用于 Microsoft 连接缓存的驱动器。 如果指定 Automatic，Configuration Manager选择可用空间最多的驱动器。
| Type: | String |
| Accepted values: | Automatic, A:, B:, C:, D:, E:, F:, G:, H:, I:, J:, K:, L:, M:, N:, O:, P:, Q:, R:, S:, T:, U:, V:, W:, X:, Y:, Z: |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MacAddressForRespondingPxeRequest
指定分发点用于响应 PXE 请求的 MAC 地址数组。
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MinimumSessionSize
指定在计划的多播开始部署 OS 之前必须接收多少个客户端请求。
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MulticastMaximumClientCount
指定可从此分发点下载 OS 的最大客户端数。
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PassThru
返回一个 对象，该对象表示正在使用的项。 默认情况下，此 cmdlet 可能不会生成任何输出。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PreferredMPEnabled
此参数是布尔值，其中参数的$true值指示已启用动态 MP 用法。 在使用此参数之前，必须在分发点上启用 PXE。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PxePassword
将 PXE 密码指定为安全字符串。
| Type: | SecureString |
| Aliases: | ComputersUsePxePassword |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PxeServerResponseDelaySec
指定在使用多个启用了 PXE 的分发点时分发点在响应计算机请求之前延迟的时间。 默认情况下，Configuration Manager PXE 服务点首先响应网络 PXE 请求。 此整数值以秒为单位。
| Type: | Int32 |
| Aliases: | PxeServerResponseDelaySeconds |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ReassignSiteCode
使用此参数将分发点重新分配到新站点。 将三个字母的网站代码指定为字符串值。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveBoundaryGroupName
从分发点中删除按名称列出的边界组数组。
| Type: | String[] |
| Aliases: | RemoveBoundaryGroupNames |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveMacAddressForRespondingPxeRequest
删除分发点用于响应 PXE 请求的 MAC 地址数组。
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RespondToAllNetwork
指示分发点响应到达其任何网络接口的 PXE 请求。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RetainDoincCache
使用 EnableDoinc 参数时，使用此参数在禁用 Microsoft 连接缓存时保留服务器上的内容。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SessionStartDelayMins
指定Configuration Manager响应第一个多播部署请求之前等待的分钟数。
| Type: | Int32 |
| Aliases: | SessionStartDelayMinutes |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SiteCode
为承载此站点系统角色的 Configuration Manager 站点指定三个字符的代码。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SiteSystemServerName
指定承载此站点系统角色的服务器的 FQDN。
| Type: | String |
| Aliases: | Name, ServerName |
| Position: | 0 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SourceDistributionPoint
使用 EnablePullDP 参数时，请使用此参数指定分发点源的数组。 此分发点从指定的源拉取内容。 使用 SourceDPRank 参数确定这些源的优先级。
| Type: | String[] |
| Aliases: | SourceDistributionPoints |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SourceDPRank
指定一个数组，该数组包含此分发点可以从中拉取内容的分发点源的优先级。 当源分发点具有相同的优先级时，拉取分发点会随机选择一个源。 将此参数与 EnablePullDP 和 SourceDistributionPoint 参数一起使用。
| Type: | Int32[] |
| Aliases: | SourceDPRanks |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StartIPAddress
指定Configuration Manager用于将数据发送到客户端的多播地址范围内的起始 IP 地址。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StartUdpPort
指定Configuration Manager用于将数据发送到客户端的多播 UDP 端口范围内的起始 UDP 端口。
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UseAnyRangeIP
指示多播使用任何范围内的 IP 地址。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UseComputerAccount
指示分发点在连接到主站点数据库时将其计算机帐户用作多播连接帐户。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UserDeviceAffinity
指定希望分发点如何将用户与其设备关联，以便进行 PXE 部署。
| Type: | UserDeviceAffinityType |
| Accepted values: | DoNotUse, AllowWithManualApproval, AllowWithAutomaticApproval |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UserName
指定分发点用于连接到主站点数据库的用户的名称。 使用格式 domain\username。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
显示在 cmdlet 运行时发生的情况。 cmdlet 不会运行。
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
输入
Microsoft.ConfigurationManagement.ManagementProvider.IResultObject
输出
IResultObject
相关链接
反馈
即将发布：在整个 2024 年，我们将逐步淘汰作为内容反馈机制的“GitHub 问题”，并将其取代为新的反馈系统。 有关详细信息，请参阅：https://aka.ms/ContentUserFeedback。
提交和查看相关反馈