Set-CMTaskSequence
设置Configuration Manager任务序列。
语法
Set-CMTaskSequence
[-AddSupportedOperatingSystemPlatform <IResultObject[]>]
[-BootImageId <String>]
[-Category <String>]
[-CustomText <String>]
[-DeploymentPackageId <String>]
[-Description <String>]
[-DisableTaskSequence <Boolean>]
[-EnableNotification <Boolean>]
[-EnableTaskSequence <Boolean>]
[-HighPerformance <Boolean>]
-InputObject <IResultObject>
[-MaxRunTimeMins <Int64>]
[-NewName <String>]
[-PassThru]
[-ProgramName <String>]
[-RemoveSupportedOperatingSystemPlatform <IResultObject[]>]
[-RunAnotherProgram <Boolean>]
[-RunEveryTime <Boolean>]
[-RunOnAnyPlatform]
[-SuppressNotification <Boolean>]
[-UseBootImage <Boolean>]
[-UseDefaultText <Boolean>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTaskSequence
[-AddSupportedOperatingSystemPlatform <IResultObject[]>]
[-BootImageId <String>]
[-Category <String>]
[-CustomText <String>]
[-DeploymentPackageId <String>]
[-Description <String>]
[-DisableTaskSequence <Boolean>]
[-EnableNotification <Boolean>]
[-EnableTaskSequence <Boolean>]
[-HighPerformance <Boolean>]
[-MaxRunTimeMins <Int64>]
[-NewName <String>]
[-PassThru]
[-ProgramName <String>]
[-RemoveSupportedOperatingSystemPlatform <IResultObject[]>]
[-RunAnotherProgram <Boolean>]
[-RunEveryTime <Boolean>]
[-RunOnAnyPlatform]
[-SuppressNotification <Boolean>]
-TaskSequenceId <String>
[-UseBootImage <Boolean>]
[-UseDefaultText <Boolean>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTaskSequence
[-AddSupportedOperatingSystemPlatform <IResultObject[]>]
[-BootImageId <String>]
[-Category <String>]
[-CustomText <String>]
[-DeploymentPackageId <String>]
[-Description <String>]
[-DisableTaskSequence <Boolean>]
[-EnableNotification <Boolean>]
[-EnableTaskSequence <Boolean>]
[-HighPerformance <Boolean>]
[-MaxRunTimeMins <Int64>]
[-NewName <String>]
[-PassThru]
[-ProgramName <String>]
[-RemoveSupportedOperatingSystemPlatform <IResultObject[]>]
[-RunAnotherProgram <Boolean>]
[-RunEveryTime <Boolean>]
[-RunOnAnyPlatform]
[-SuppressNotification <Boolean>]
-TaskSequenceName <String>
[-UseBootImage <Boolean>]
[-UseDefaultText <Boolean>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] 说明
Set-CMTaskSequence cmdlet 修改Configuration Manager任务序列。
注意
从Configuration Manager站点驱动器运行Configuration Manager cmdlet，例如 PS XYZ:\>。 有关详细信息，请参阅 入门。
示例
示例 1：获取任务序列并更改其名称
PS XYZ:\> $TaskSequence = Get-CMTaskSequence -Name "TaskSequence01"
PS XYZ:\> Set-CMTaskSequence -InputObject $TaskSequence -NewName "NewTS01"第一个命令获取名为 TaskSequence01 的任务序列对象，并将对象存储在 $TaskSequence 变量中。
第二个命令将存储在 $TaskSequence 中的任务序列的名称更改为 NewTS01。
示例 2：传递任务序列并更改其名称
PS XYZ:\> Get-CMTaskSequence -Name "TaskSequence02" | Set-CMTaskSequence -NewName "NewTS02"此命令获取名为 TaskSequence02 的任务序列对象，并使用管道运算符将对象传递给 Set-CMTaskSequence，这将任务序列对象的名称更改为 NewTS02。
参数
-AddSupportedOperatingSystemPlatform
将支持的操作系统平台对象添加到任务序列。 若要获取支持的操作系统平台对象，请使用 Get-CMSupportedPlatform cmdlet。
| Type: | IResultObject[] |
| Aliases: | AddSupportedOperatingSystemPlatforms |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-BootImageId
指定启动映像的 ID。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Category
指定任务序列的类别。 可以使用类别对任务序列进行分组。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
提示你在运行 cmdlet 之前进行确认。
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CustomText
指定任务序列的自定义文本。 任务序列运行时，自定义文本将显示在进度通知对话框中。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DeploymentPackageId
指定包的 ID。 如果为 RunAnotherProgram 参数指定值 $True，则指定的包在任务序列运行之前运行。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Description
指定任务序列的说明。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableTaskSequence
指示是否禁用此任务序列。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableWildcardHandling
此参数将通配符视为文本字符值。 不能将其与 ForceWildcardHandling 组合使用。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableNotification
指示是否为此任务序列启用通知。
| Type: | Boolean |
| Aliases: | EnableNotifications |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableTaskSequence
指示是否启用此任务序列。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ForceWildcardHandling
此参数处理通配符，并可能导致意外行为 (不建议) 。 不能将其与 DisableWildcardHandling 结合使用。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-HighPerformance
使用此参数可在任务序列属性的“ 性能 ”页上设置以下选项： 作为高性能电源计划运行。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InputObject
指定任务序列对象。 若要获取任务序列对象，请使用 Get-CMTaskSequence cmdlet。
| Type: | IResultObject |
| Aliases: | TaskSequence |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-MaxRunTimeMins
指定任务序列的最大运行时间（以分钟为单位）。
| Type: | Int64 |
| Aliases: | Duration |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-NewName
指定任务序列的新名称。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PassThru
返回当前工作对象。 默认情况下，此 cmdlet 不生成任何输出。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ProgramName
指定要从 DeploymentPackageId 参数指定的Configuration Manager软件包运行的程序的名称。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveSupportedOperatingSystemPlatform
从任务序列中删除受支持的操作系统平台对象。 若要获取支持的操作系统平台对象，请使用 Get-CMSupportedPlatform cmdlet。
| Type: | IResultObject[] |
| Aliases: | RemoveSupportedOperatingSystemPlatforms |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RunAnotherProgram
指示是否在运行任务序列之前运行另一个程序。 使用 DeploymentPackageId 参数和 ProgramName 参数指定程序。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RunEveryTime
指示每次运行任务序列时， ProgramName 参数中指定的程序是否运行。 如果将值指定为 $False，则如果程序在过去成功运行，则程序不会运行。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RunOnAnyPlatform
指示任务序列在任何操作系统平台上运行。
| Type: | SwitchParameter |
| Aliases: | ClearSupportedOperatingSystemPlatforms |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SuppressNotification
指示是否禁止显示此任务序列的通知。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-TaskSequenceId
指定任务序列的 ID。
| Type: | String |
| Aliases: | Id, TaskSequencePackageId |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-TaskSequenceName
指定任务序列的名称。
| Type: | String |
| Aliases: | Name |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UseBootImage
指示任务序列是否使用 BootImageID 参数指定的启动映像。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UseDefaultText
指示在任务序列运行时是否使用进度通知对话框中的默认文本。 如果为此参数选择值 $False，请确保使用 CustomText 参数指定自定义文本。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
显示在 cmdlet 运行时发生的情况。 此 cmdlet 未运行。
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
输入
Microsoft.ConfigurationManagement.ManagementProvider.IResultObject
输出
System.Object
相关链接
反馈
即将发布：在整个 2024 年，我们将逐步淘汰作为内容反馈机制的“GitHub 问题”，并将其取代为新的反馈系统。 有关详细信息，请参阅：https://aka.ms/ContentUserFeedback。
提交和查看相关反馈