Set-WdsInstallImage
Set-WdsInstallImage
Modifies the properties of an install image.
语法
Parameter Set: AutoStart
Set-WdsInstallImage -ImageName <String> -Multicast [-AsJob] [-CimSession <CimSession[]> ] [-ClientCount <UInt32> ] [-DisplayOrder <UInt32> ] [-FileName <String> ] [-ImageGroup <String> ] [-NewDescription <String> ] [-NewImageName <String> ] [-OverwriteUnattend] [-StartTime <DateTime> ] [-ThrottleLimit <Int32> ] [-TransmissionName <String> ] [-UnattendFile <String> ] [-UserFilter <String> ] [ <CommonParameters>]
Parameter Set: ManualStart
Set-WdsInstallImage -ImageName <String> -ManualStart -Multicast [-AsJob] [-CimSession <CimSession[]> ] [-DisplayOrder <UInt32> ] [-FileName <String> ] [-ImageGroup <String> ] [-NewDescription <String> ] [-NewImageName <String> ] [-OverwriteUnattend] [-ThrottleLimit <Int32> ] [-TransmissionName <String> ] [-UnattendFile <String> ] [-UserFilter <String> ] [ <CommonParameters>]
Parameter Set: SingleImage
Set-WdsInstallImage -ImageName <String> [-AsJob] [-CimSession <CimSession[]> ] [-DisplayOrder <UInt32> ] [-FileName <String> ] [-ImageGroup <String> ] [-NewDescription <String> ] [-NewImageName <String> ] [-OverwriteUnattend] [-ThrottleLimit <Int32> ] [-UnattendFile <String> ] [-UserFilter <String> ] [ <CommonParameters>]
Parameter Set: StartTransmission
Set-WdsInstallImage -ImageName <String> -StartScheduledCast [-AsJob] [-CimSession <CimSession[]> ] [-DisplayOrder <UInt32> ] [-FileName <String> ] [-ImageGroup <String> ] [-NewDescription <String> ] [-NewImageName <String> ] [-OverwriteUnattend] [-ThrottleLimit <Int32> ] [-UnattendFile <String> ] [-UserFilter <String> ] [ <CommonParameters>]
Parameter Set: StopTransmission
Set-WdsInstallImage -ImageName <String> -StopMulticastTransmission [-AsJob] [-CimSession <CimSession[]> ] [-DisplayOrder <UInt32> ] [-FileName <String> ] [-Force] [-ImageGroup <String> ] [-NewDescription <String> ] [-NewImageName <String> ] [-OverwriteUnattend] [-ThrottleLimit <Int32> ] [-UnattendFile <String> ] [-UserFilter <String> ] [ <CommonParameters>]
详细说明
The Set-WdsInstallImage cmdlet modifies the properties of an install image in the Windows Deployment Services image store. Use this cmdlet to do any of the following:
-- Change the name of an install image.
-- Change the description of an install image.
-- Set the display order of an install image in the image menu.
-- Specify an answer file for unattended setup of an install image.
-- Set permissions for users or groups to access the image.
When you work with multicast transmissions that use an install image as content, you can:
-- Create and name an AutoCast transmission.
-- Create and name a ScheduledCast transmission which begins when a preset number of clients are ready to start, at a specific time, or both.
-- Create a manually started ScheduledCast transmission.
-- Start a ScheduledCast transmission.
-- Stop a multicast transmission in progress, and then either disconnect clients immediately, or allow them to finish, but not allow any new clients to join.
An AutoCast transmission is a multicast transmission. When a client requests an install image, the multicast transmission begins. Clients that request the same image are joined to the multicast transmission.
A ScheduledCast transmission is a multicast transmission. When a specified number of clients request an image, or a specified time of day is reached, the multicast transmission begins. If you do not specify either of these conditions, you must manually start the transmission.
Specify the install image by using the image name and image group name. If the image name and image group name do not uniquely identify the install image, specify the file name.
参数
-AsJob
别名 |
无 |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
false |
是否接受通配符？ |
false |
-CimSession<CimSession[]>
在远程会话中或在远程计算机上运行 cmdlet。输入计算机名称或会话对象，例如 New-CimSession 或 Get-CimSession cmdlet 的输出。默认为本地计算机上的当前会话。
别名 |
Session |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
false |
是否接受通配符？ |
false |
-ClientCount<UInt32>
Specifies the number of clients that must connect to a transmission. If you also specify the MulticastTransmission parameter, the client count specifies the number of clients that must connect to the ScheduledCast transmission in order for it to begin. Use the StartScheduledCast parameter to begin a transmission before reaching the client count. If you specify the ClientCount parameter and the StartTime parameter, the transmission begins when either a sufficient number of clients have connected or at the time specified by the StartTime parameter.
You may not specify this parameter together with the ManualStart parameter.
别名 |
无 |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
false |
是否接受通配符？ |
false |
-DisplayOrder<UInt32>
Specifies the order in which images appear in the boot menu on Pre-Boot Execution Environment (PXE) clients. The menu lists the boot images in ascending order, smallest number to largest number.
别名 |
无 |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
false |
是否接受通配符？ |
false |
-FileName<String>
Specifies a file name. This is the file name of the install image. Use this parameter to specify the file name for the install image if the install image name does not uniquely identify the image.
别名 |
无 |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
True (ByPropertyName) |
是否接受通配符？ |
false |
-Force
Indicates that the cmdlet disconnects any clients currently connected to the multicast transmission. If you do not specify this parameter for an AutoCast transmission, existing clients finish receiving the content, but no new clients join.
别名 |
无 |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
false |
是否接受通配符？ |
false |
-ImageGroup<String>
Specifies the name of an image group. This image group contains the image to modify.. If you do not specify an image group, and only one image group exists on the server, the cmdlet uses that image group by default. If more than one image group exists on the server, you must specify the image group.
别名 |
无 |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
True (ByPropertyName) |
是否接受通配符？ |
false |
-ImageName<String>
Specifies the name of an image. This is the name of the image to modify.
别名 |
无 |
是否为必需？ |
true |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
True (ByPropertyName) |
是否接受通配符？ |
false |
-ManualStart
Indicates that the transmission uses a manual start. If you also specify the MulticastTransmission parameter, the cmdlet creates a ScheduledCast transmission that does not begin until a StartScheduledCast command is given.
别名 |
无 |
是否为必需？ |
true |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
false |
是否接受通配符？ |
false |
-Multicast
Indicates that the cmdlet enables an AutoCast transmission on the image. If you do not specify a name by using the TransmissionName parameter, the multicast transmission uses the image name
别名 |
无 |
是否为必需？ |
true |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
false |
是否接受通配符？ |
false |
-NewDescription<String>
Specifies a new description for the install image to create in the set operation.
别名 |
无 |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
false |
是否接受通配符？ |
false |
-NewImageName<String>
Specifies a new name for the image file to create in the set operation.
别名 |
无 |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
false |
是否接受通配符？ |
false |
-OverwriteUnattend
Indicates that the cmdlet can overwrite an existing answer file. If you specify the UnattendFile parameter, the cmdlet overwrites an existing answer file associated with the image.
别名 |
无 |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
false |
是否接受通配符？ |
false |
-StartScheduledCast
Indicates that the cmdlet enables and begins a ScheduledCast transmission on the image. If there are no clients connected to the transmission, the transmission fails to start.
别名 |
无 |
是否为必需？ |
true |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
false |
是否接受通配符？ |
false |
-StartTime<DateTime>
Specifies a day and time, in MM/DD/YYYY.hh:mm:ss format, that denotes the start time. If you specify the MulticastTransmission parameter, this parameter denotes the time the ScheduledCast transmission begins. The StartScheduledCast command can start a transmission before reaching the client count. If you specify both the StartTime parameter and the ClientCount parameter, the transmission begins when either a sufficient number of clients connect, or the time specified in this parameter is reached. Do not specify this parameter together with the ManualStart parameter.
别名 |
无 |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
false |
是否接受通配符？ |
false |
-StopMulticastTransmission
Indicates that Windows Deployment Services stop the multicast transmission of the image. If you specify the Force parameter, the cmdlet disconnects any clients connected to the multicast transmission. If you do not specify the Force parameter, and the transmission is autocast, current clients finish receiving the content, but no additional clients can join the transmission.
别名 |
无 |
是否为必需？ |
true |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
false |
是否接受通配符？ |
false |
-ThrottleLimit<Int32>
指定可建立的用于运行此 cmdlet 的并发操作的最大数目。如果省略了此参数或输入了值 0，那么 Windows PowerShell® 将基于正在计算机上运行的 CIM cmdlet 的数目，计算 cmdlet 的最佳中止值。中止值仅适用于当前 cmdlet，而不适用于会话或计算机。
别名 |
无 |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
false |
是否接受通配符？ |
false |
-TransmissionName<String>
Specifies a name for the multicast transmission.
别名 |
无 |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
false |
是否接受通配符？ |
false |
-UnattendFile<String>
Specifies the full path for the answer file associated with the image.
别名 |
无 |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
false |
是否接受通配符？ |
false |
-UserFilter<String>
Specifies the access controls on the image, in Security Descriptor Definition Language (SDDL) format. To restrict access to the file resources, and access to all images within an image group, set access controls on the image group itself.
别名 |
无 |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
false |
是否接受通配符？ |
false |
<CommonParameters>
此 cmdlet 支持通用参数：-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer 和 -OutVariable。有关详细信息，请参阅 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
输入
输入类型是指可通过管道传送给 cmdlet 的对象的类型。
输出
输出类型是 cmdlet 所发出对象的类型。
- Microsoft.Management.Infrastructure.CimInstance#MSFT_WdsInstallImage
示例
Example 1: Modify an install image
This command modifies an install image for automatic installation.
PS C:\> Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -DisplayOrder 0 -NewImageName "Fabrikam Latest with LOB v2.0 apps" -UnattendFile "D:\images\unattend\FabrikamwLOB.xml" -OverwriteUnattend -UserFilter "O:BAG:DUD:(A;OICI;FA;;;SY)(A;OICI;FA;;;BA)(A;OICI;0x1200a9;;;AU)(A;OICI;FA;;;S-1-5-80-1688844526-3235337491-1375791646-891369040-3692469510)"
Example 2: Modify an install image for multicast transmission
This command modifies an install image for multicast transmission.
PS C:\> Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -Multicast -TransmissionName "Fabrikam Latest AutoCast"
Example 3: Modify start time and client count conditions for an install image
This command modifies an install image by using the ClientCount and StartTime parameters.
PS C:\> Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -Multicast -ClientCount 50 -StartTime 2014/12/01:11:00 -TransmissionName "Fabrikam Latest ScheduledCast with automatic start"
Example 4: Modify an install image for manual start
This command modifies an install image by using the ManualStart parameter.
PS C:\> Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -Multicast -ManualStart -TransmissionName "Fabrikam Latest ScheduledCast with manual start"
Example 5: Modify an install image to start
This command modifies an install image to begin a scheduled transmission.
PS C:\> Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -StartScheduledCast
Example 6: Modify an install image to stop a transmission
This command stops a multicast transmission for an install image.
PS C:\> Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -StopMulticastTransmission