Encoder.Convert 方法

參考

定義

命名空間:: System.Text

組件:: System.Runtime.dll

組件:: netstandard.dll

組件:: mscorlib.dll

組件:: System.Text.Encoding.dll

重要

部分資訊涉及發行前產品，在發行之前可能會有大幅修改。 Microsoft 對此處提供的資訊，不做任何明確或隱含的瑕疵擔保。

將 Unicode 字元的緩衝區或陣列轉換成編碼的位元組序列。

多載

Convert(ReadOnlySpan<Char>, Span<Byte>, Boolean, Int32, Int32, Boolean)	將 Unicode 字元範圍轉換為編碼的位元組序列，並將結果儲存在另一個緩衝區內。
Convert(Char, Int32, Byte, Int32, Boolean, Int32, Int32, Boolean)	將 Unicode 字元的緩衝區轉換成編碼的位元組序列，並將結果儲存在另一個緩衝區。
Convert(Char[], Int32, Int32, Byte[], Int32, Int32, Boolean, Int32, Int32, Boolean)	將 Unicode 字元的陣列轉換成編碼的位元組序列，並將結果儲存在位元組陣列中。

Convert(ReadOnlySpan<Char>, Span<Byte>, Boolean, Int32, Int32, Boolean)

將 Unicode 字元範圍轉換為編碼的位元組序列，並將結果儲存在另一個緩衝區內。

public:
 virtual void Convert(ReadOnlySpan<char> chars, Span<System::Byte> bytes, bool flush, [Runtime::InteropServices::Out] int % charsUsed, [Runtime::InteropServices::Out] int % bytesUsed, [Runtime::InteropServices::Out] bool % completed);

public virtual void Convert (ReadOnlySpan<char> chars, Span<byte> bytes, bool flush, out int charsUsed, out int bytesUsed, out bool completed);

abstract member Convert : ReadOnlySpan<char> * Span<byte> * bool * int * int * bool -> unit
override this.Convert : ReadOnlySpan<char> * Span<byte> * bool * int * int * bool -> unit

Public Overridable Sub Convert (chars As ReadOnlySpan(Of Char), bytes As Span(Of Byte), flush As Boolean, ByRef charsUsed As Integer, ByRef bytesUsed As Integer, ByRef completed As Boolean)

參數

chars: ReadOnlySpan<Char>

要轉換的 UTF-16 編碼字元範圍。

bytes: Span<Byte>

要儲存轉換位元組的範圍緩衝區。

flush: Boolean

若表示不進行任何其他資料轉換即為 true；否則為 false。

charsUsed: Int32

傳回此方法時，包含來自 chars 為轉換所使用的位元組數目。這個參數會以未初始化的狀態傳遞。

bytesUsed: Int32

傳回此方法時，包含轉換所使用的位元組數目。這個參數會以未初始化的狀態傳遞。

completed: Boolean

當這個方法傳回時，若 chars 中的所有字元皆已轉換，則為 true；否則為 false。這個參數會以未初始化的狀態傳遞。

備註

請記住，物件會在的 Encoder 呼叫之間儲存狀態 Convert 。當應用程式使用資料流程完成時，應該將 flush 參數設為， true 以確定狀態資訊已清除。使用此設定時，編碼器會忽略資料區塊結尾的無效位元組，並清除內部緩衝區。任何剩餘的已處理資料（如代理程式配對的高代理）都會根據目前的回溯設定進行轉換。

Convert方法的設計目的是要在迴圈中使用，以編碼任意數量的輸入，例如從檔案或資料流程讀取的資料。它會將編碼作業的輸出儲存在固定大小的緩衝區中。 GetBytes 如果輸出緩衝區不夠大，則會擲回例外狀況，但 Convert 會盡可能填滿最多的空間，並傳回讀取的字元和寫入的位元組。另請參閱 Encoding.GetBytes 主題，以取得更多批註。

completedOutput 參數會指出輸入緩衝區中的所有資料是否已轉換，並儲存在輸出緩衝區中。 false如果參數指定的字元數不 charCount 超過參數所指定的位元組數目，則這個參數會設定為 byteCount 。在這種情況下，應用程式應該使用輸出緩衝區的內容或提供新的輸出緩衝區、 chars 依參數指定的字元數遞增參數 charsUsed ，然後 Convert 再次呼叫方法來處理其餘的輸入。

completed false 即使 charsUsed 參數和 ' char ' 範圍長度相等，也可以將參數設定為。如果物件中仍有資料尚未 Encoder 儲存在緩衝區中，就會發生這種情況 chars 。

適用於

Convert(Char, Int32, Byte, Int32, Boolean, Int32, Int32, Boolean)

重要

此 API 不符合 CLS 規範。

符合 CLS 規範替代方案: System.Text.Encoder.Convert(Char[], Int32, Int32, Byte[], Int32, Int32, Boolean, Int32, Int32, Boolean)

將 Unicode 字元的緩衝區轉換成編碼的位元組序列，並將結果儲存在另一個緩衝區。

public:
 virtual void Convert(char* chars, int charCount, System::Byte* bytes, int byteCount, bool flush, [Runtime::InteropServices::Out] int % charsUsed, [Runtime::InteropServices::Out] int % bytesUsed, [Runtime::InteropServices::Out] bool % completed);

[System.CLSCompliant(false)]
public virtual void Convert (char* chars, int charCount, byte* bytes, int byteCount, bool flush, out int charsUsed, out int bytesUsed, out bool completed);

public virtual void Convert (char* chars, int charCount, byte* bytes, int byteCount, bool flush, out int charsUsed, out int bytesUsed, out bool completed);

[System.CLSCompliant(false)]
[System.Runtime.InteropServices.ComVisible(false)]
public virtual void Convert (char* chars, int charCount, byte* bytes, int byteCount, bool flush, out int charsUsed, out int bytesUsed, out bool completed);

[System.CLSCompliant(false)]
[System.Runtime.InteropServices.ComVisible(false)]
[System.Security.SecurityCritical]
public virtual void Convert (char* chars, int charCount, byte* bytes, int byteCount, bool flush, out int charsUsed, out int bytesUsed, out bool completed);

[<System.CLSCompliant(false)>]
abstract member Convert : nativeptr<char> * int * nativeptr<byte> * int * bool * int * int * bool -> unit
override this.Convert : nativeptr<char> * int * nativeptr<byte> * int * bool * int * int * bool -> unit

abstract member Convert : nativeptr<char> * int * nativeptr<byte> * int * bool * int * int * bool -> unit
override this.Convert : nativeptr<char> * int * nativeptr<byte> * int * bool * int * int * bool -> unit

[<System.CLSCompliant(false)>]
[<System.Runtime.InteropServices.ComVisible(false)>]
abstract member Convert : nativeptr<char> * int * nativeptr<byte> * int * bool * int * int * bool -> unit
override this.Convert : nativeptr<char> * int * nativeptr<byte> * int * bool * int * int * bool -> unit

[<System.CLSCompliant(false)>]
[<System.Runtime.InteropServices.ComVisible(false)>]
[<System.Security.SecurityCritical>]
abstract member Convert : nativeptr<char> * int * nativeptr<byte> * int * bool * int * int * bool -> unit
override this.Convert : nativeptr<char> * int * nativeptr<byte> * int * bool * int * int * bool -> unit

參數

chars: Char*

要轉換的 UTF-16 編碼字元字串位址。

charCount: Int32

chars 中要轉換的字元數。

bytes: Byte*

緩衝區位址，用來儲存已轉換的位元組。

byteCount: Int32

bytes 中要用於轉換的位元數上限。

flush: Boolean

若表示不進行任何其他資料轉換即為 true；否則為 false。

charsUsed: Int32

傳回此方法時，包含來自 chars 為轉換所使用的位元組數目。這個參數會以未初始化的狀態傳遞。

bytesUsed: Int32

傳回此方法時，包含轉換所使用的位元組數目。這個參數會以未初始化的狀態傳遞。

completed: Boolean

傳回此方法時，若所有 charCount 指定的字元皆已轉換則包含 true；否則為 false。這個參數會以未初始化的狀態傳遞。

屬性: CLSCompliantAttribute ComVisibleAttribute SecurityCriticalAttribute

例外狀況

ArgumentNullException

chars 或 bytes 是 null (Nothing)。

ArgumentOutOfRangeException

charCount 或 byteCount 小於零。

ArgumentException

輸出緩衝區太小而無法包含任何已轉換的輸入。輸出緩衝區應大於或等於 GetByteCount 方法所指出的大小。

EncoderFallbackException

發生後援 (如需詳細資訊，請參閱 .NET 中的字元編碼)

-和-

Fallback 設定為 EncoderExceptionFallback。

備註

completed參數也可以設定為 false ，即使 charsUsed 和參數相等也是一樣 charCount 。如果物件中仍有資料尚未 Encoder 儲存在緩衝區中，就會發生這種情況 chars 。

適用於

Convert(Char[], Int32, Int32, Byte[], Int32, Int32, Boolean, Int32, Int32, Boolean)

將 Unicode 字元的陣列轉換成編碼的位元組序列，並將結果儲存在位元組陣列中。

public:
 virtual void Convert(cli::array <char> ^ chars, int charIndex, int charCount, cli::array <System::Byte> ^ bytes, int byteIndex, int byteCount, bool flush, [Runtime::InteropServices::Out] int % charsUsed, [Runtime::InteropServices::Out] int % bytesUsed, [Runtime::InteropServices::Out] bool % completed);

public virtual void Convert (char[] chars, int charIndex, int charCount, byte[] bytes, int byteIndex, int byteCount, bool flush, out int charsUsed, out int bytesUsed, out bool completed);

[System.Runtime.InteropServices.ComVisible(false)]
public virtual void Convert (char[] chars, int charIndex, int charCount, byte[] bytes, int byteIndex, int byteCount, bool flush, out int charsUsed, out int bytesUsed, out bool completed);

abstract member Convert : char[] * int * int * byte[] * int * int * bool * int * int * bool -> unit
override this.Convert : char[] * int * int * byte[] * int * int * bool * int * int * bool -> unit

[<System.Runtime.InteropServices.ComVisible(false)>]
abstract member Convert : char[] * int * int * byte[] * int * int * bool * int * int * bool -> unit
override this.Convert : char[] * int * int * byte[] * int * int * bool * int * int * bool -> unit

Public Overridable Sub Convert (chars As Char(), charIndex As Integer, charCount As Integer, bytes As Byte(), byteIndex As Integer, byteCount As Integer, flush As Boolean, ByRef charsUsed As Integer, ByRef bytesUsed As Integer, ByRef completed As Boolean)

參數

chars: Char[]

要轉換的字元陣列。

charIndex: Int32

chars 中要轉換的第一個項目。

charCount: Int32

要轉換的 chars 項目數目。

bytes: Byte[]

儲存位元組儲存所在的陣列。

byteIndex: Int32

bytes 中的第一個項目，其為儲存資料所在。

byteCount: Int32

轉換中要使用的 bytes 之項目數上限。

flush: Boolean

若表示不進行任何其他資料轉換即為 true；否則為 false。

charsUsed: Int32

傳回此方法時，包含來自 chars 為轉換所使用的位元組數目。這個參數會以未初始化的狀態傳遞。

bytesUsed: Int32

傳回此方法時，包含轉換所產生的位元組數目。這個參數會以未初始化的狀態傳遞。

completed: Boolean

傳回此方法時，若所有 charCount 指定的字元皆已轉換則包含 true；否則為 false。這個參數會以未初始化的狀態傳遞。

屬性: ComVisibleAttribute

例外狀況

ArgumentNullException

chars 或 bytes 是 null (Nothing)。

ArgumentOutOfRangeException

charIndex、charCount、byteIndex 或 byteCount 小於零。

-或-

chars - charIndex 的長度小於 charCount。

-或-

bytes - byteIndex 的長度小於 byteCount。

ArgumentException

輸出緩衝區太小而無法包含任何已轉換的輸入。輸出緩衝區應大於或等於 GetByteCount 方法所指出的大小。

EncoderFallbackException

發生後援 (如需詳細資訊，請參閱 .NET 中的字元編碼)

-和-

Fallback 設定為 EncoderExceptionFallback。

範例

下列範例會使用 Convert 方法，將 utf-16 字元的檔案轉換為 utf-8，然後使用 Convert 方法將 utf-8 字元轉換回 utf-16 字元。

// This code example demonstrates the Encoder.Convert() and Decoder.Convert methods.
// This example uses files for input and output, but any source that can be expressed
// as a stream can be used instead.

    using System;
    using System.Text;
    using System.IO;

    public class Sample
    {
    static void Main(string[] args)
        {
// Create a large file of UTF-16 encoded Unicode characters. The file is named Example.txt,
// and is used as input to the Encoder.Convert() method.

            CreateTestFile("Example.txt");

// Using an input file of UTF-16 encoded characters named Example.txt, create an output file
// of UTF-8 encoded bytes named UTF8.txt.

            EncoderConvert("Example.txt", "UTF8.txt", Encoding.UTF8);

// Using an input file of UTF-8 encoded bytes named UTF8.txt, create an output file
// of UTF-16 encoded characters named UTF16.txt.

            DecoderConvert("UTF8.txt", "UTF16.txt", Encoding.UTF8);
        }

// --------------------------------------------------------------------------------------------
// Use the Encoder.Convert() method to convert a file of characters to a file of encoded bytes.
// --------------------------------------------------------------------------------------------
        static void EncoderConvert(String inputFileName, String outputFileName, Encoding enc)
        {
// Convert an input file of characters to an output file of encoded bytes.
// StreamWriter could convert the input file for us, but we'll perform the conversion
// ourselves.

            FileStream fs = new FileStream(outputFileName, FileMode.Create);
            BinaryWriter outputFile = new BinaryWriter(fs);

// StreamReader will detect Unicode encoding from the Byte Order Mark that heads the input file.
            StreamReader inputFile = new StreamReader(inputFileName);

// Get an Encoder.
            Encoder encoder = enc.GetEncoder();

// Guarantee the output buffer large enough to convert a few characters.
            int UseBufferSize = 64;
            if (UseBufferSize < enc.GetMaxByteCount(10))
                    UseBufferSize = enc.GetMaxByteCount(10);
            byte[] bytes = new byte[UseBufferSize];

// Intentionally make the input character buffer larger than the output byte buffer so the
// conversion loop executes more than one cycle.

            char[] chars = new char[UseBufferSize * 4];
            int charsRead;
            do
            {
// Read at most the number of characters that will fit in the input buffer. The return
// value is the actual number of characters read, or zero if no characters remain.
                charsRead = inputFile.Read(chars, 0, UseBufferSize * 4);

                bool completed = false;
                int charIndex = 0;
                int charsUsed;
                int bytesUsed;

                while (!completed)
                {
// If this is the last input data, flush the encoder's internal buffer and state.

                    bool flush = (charsRead == 0);
                    encoder.Convert(chars, charIndex, charsRead - charIndex,
                                    bytes, 0, UseBufferSize, flush,
                                    out charsUsed, out bytesUsed, out completed);

// The conversion produced the number of bytes indicated by bytesUsed. Write that number
// of bytes to the output file.
                    outputFile.Write(bytes, 0, bytesUsed);

// Increment charIndex to the next block of characters in the input buffer, if any, to convert.
                    charIndex += charsUsed;
                }
            }
            while(charsRead != 0);

            outputFile.Close();
            fs.Close();
            inputFile.Close();
        }

// --------------------------------------------------------------------------------------------
// Use the Decoder.Convert() method to convert a file of encoded bytes to a file of characters.
// --------------------------------------------------------------------------------------------
        static void DecoderConvert(String inputFileName, String outputFileName, Encoding enc)
        {
// Convert an input file of of encoded bytes to an output file characters.
// StreamWriter could convert the input file for us, but we'll perform the conversion
// ourselves.

            StreamWriter outputFile = new StreamWriter(outputFileName, false, Encoding.Unicode);

// Read the input as a binary file so we can detect the Byte Order Mark.
            FileStream fs = new FileStream(inputFileName, FileMode.Open);
            BinaryReader inputFile = new BinaryReader(fs);

// Get a Decoder.
            Decoder decoder = enc.GetDecoder();

// Guarantee the output buffer large enough to convert a few characters.
            int UseBufferSize = 64;
            if (UseBufferSize < enc.GetMaxCharCount(10))
                    UseBufferSize = enc.GetMaxCharCount(10);
            char[] chars = new char[UseBufferSize];

// Intentionally make the input byte buffer larger than the output character buffer so the
// conversion loop executes more than one cycle.

            byte[] bytes = new byte[UseBufferSize * 4];
            int bytesRead;
            do
            {
// Read at most the number of bytes that will fit in the input buffer. The
// return value is the actual number of bytes read, or zero if no bytes remain.

                bytesRead = inputFile.Read(bytes, 0, UseBufferSize * 4);

                bool completed = false;
                int byteIndex = 0;
                int bytesUsed;
                int charsUsed;

                while (!completed)
                {
// If this is the last input data, flush the decoder's internal buffer and state.

                    bool flush = (bytesRead == 0);
                    decoder.Convert(bytes, byteIndex, bytesRead - byteIndex,
                                    chars, 0, UseBufferSize, flush,
                                    out bytesUsed, out charsUsed, out completed);

// The conversion produced the number of characters indicated by charsUsed. Write that number
// of characters to the output file.

                    outputFile.Write(chars, 0, charsUsed);

// Increment byteIndex to the next block of bytes in the input buffer, if any, to convert.
                    byteIndex += bytesUsed;
                }
            }
            while(bytesRead != 0);

            outputFile.Close();
            fs.Close();
            inputFile.Close();
        }

// --------------------------------------------------------------------------------------------
// Create a large file of UTF-16 encoded Unicode characters.
// --------------------------------------------------------------------------------------------
        static void CreateTestFile(String FileName)
        {
// StreamWriter defaults to UTF-8 encoding so explicitly specify Unicode, that is,
// UTF-16, encoding.
            StreamWriter file = new StreamWriter(FileName, false, Encoding.Unicode);

// Write a line of text 100 times.
            for (int i = 0; i < 100; i++)
            {
                file.WriteLine("This is an example input file used by the convert example.");
            }

// Write Unicode characters from U+0000 to, but not including, the surrogate character range.
            for (char c = (char)0; c < (char)0xD800; c++)
            {
                file.Write(c);
            }
            file.Close();
        }
    }

/*
This code example produces the following results:

(Execute the -dir- console window command and examine the files created.)

Example.txt, which contains 122,594 bytes (61,297 UTF-16 encoded characters).
UTF8.txt, which contains 169,712 UTF-8 encoded bytes.
UTF16.txt, which contains 122,594 bytes (61,297 UTF-16 encoded characters).

(Execute the -comp- console window command and compare the two Unicode files.)

>comp example.txt utf16.txt /L
Comparing example.txt and utf16.txt...
Files compare OK

(The two files are equal.)

*/

' This code example demonstrates the Encoder.Convert() and Decoder.Convert methods. 
' This example uses files for input and output, but any source that can be expressed
' as a stream can be used instead.

Imports System.Text
Imports System.IO

Public Class Sample
    Shared Sub Main(ByVal args() As String) 
        ' Create a large file of UTF-16 encoded Unicode characters. The file is named Example.txt, 
        ' and is used as input to the Encoder.Convert() method. 
        CreateTestFile("Example.txt")
        
        
        ' Using an input file of UTF-16 encoded characters named Example.txt, create an output file 
        ' of UTF-8 encoded bytes named UTF8.txt.
        EncoderConvert("Example.txt", "UTF8.txt", Encoding.UTF8)
        
        ' Using an input file of UTF-8 encoded bytes named UTF8.txt, create an output file 
        ' of UTF-16 encoded characters named UTF16.txt.
        DecoderConvert("UTF8.txt", "UTF16.txt", Encoding.UTF8)
    
    End Sub
    
    ' --------------------------------------------------------------------------------------------
    ' Use the Encoder.Convert() method to convert a file of characters to a file of encoded bytes.
    ' --------------------------------------------------------------------------------------------
    Shared Sub EncoderConvert(ByVal inputFileName As String, ByVal outputFileName As String, ByVal enc As Encoding) 
        ' Convert an input file of characters to an output file of encoded bytes.
        ' StreamWriter could convert the input file for us, but we'll perform the conversion 
        ' ourselves.
        Dim fs As New FileStream(outputFileName, FileMode.Create)
        Dim outputFile As New BinaryWriter(fs)
        
        ' StreamReader will detect Unicode encoding from the Byte Order Mark that heads the input file.
        Dim inputFile As New StreamReader(inputFileName)
        
        ' Get an Encoder.
        Dim encoder As Encoder = enc.GetEncoder()
        
        ' Guarantee the output buffer large enough to convert a few characters.
        Dim UseBufferSize As Integer = 64
        If UseBufferSize < enc.GetMaxByteCount(10) Then
            UseBufferSize = enc.GetMaxByteCount(10)
        End If
        Dim bytes(UseBufferSize) As Byte
        
        ' Intentionally make the input character buffer larger than the output byte buffer so the 
        ' conversion loop executes more than one cycle. 
        Dim chars(UseBufferSize * 4) As Char
        Dim charsRead As Integer
        Do
            ' Read at most the number of characters that will fit in the input buffer. The return 
            ' value is the actual number of characters read, or zero if no characters remain. 
            charsRead = inputFile.Read(chars, 0, UseBufferSize * 4)
            
            Dim completed As Boolean = False
            Dim charIndex As Integer = 0
            Dim charsUsed As Integer
            Dim bytesUsed As Integer
            
            While Not completed
                ' If this is the last input data, flush the encoder's internal buffer and state.
                Dim flush As Boolean = charsRead = 0
                encoder.Convert(chars, charIndex, charsRead - charIndex, bytes, 0, UseBufferSize, flush, charsUsed, bytesUsed, completed)
                
                ' The conversion produced the number of bytes indicated by bytesUsed. Write that number
                ' of bytes to the output file.
                outputFile.Write(bytes, 0, bytesUsed)
                
                ' Increment charIndex to the next block of characters in the input buffer, if any, to convert.
                charIndex += charsUsed
            End While
        Loop While charsRead <> 0
        
        outputFile.Close()
        fs.Close()
        inputFile.Close()
    
    End Sub
    
    ' --------------------------------------------------------------------------------------------
    ' Use the Decoder.Convert() method to convert a file of encoded bytes to a file of characters.
    ' --------------------------------------------------------------------------------------------
    Shared Sub DecoderConvert(ByVal inputFileName As String, ByVal outputFileName As String, ByVal enc As Encoding) 
        ' Convert an input file of of encoded bytes to an output file characters.
        ' StreamWriter could convert the input file for us, but we'll perform the conversion 
        ' ourselves.
        Dim outputFile As New StreamWriter(outputFileName, False, Encoding.Unicode)
        
        ' Read the input as a binary file so we can detect the Byte Order Mark.
        Dim fs As New FileStream(inputFileName, FileMode.Open)
        Dim inputFile As New BinaryReader(fs)
        
        ' Get a Decoder.
        Dim decoder As Decoder = enc.GetDecoder()
        
        ' Guarantee the output buffer large enough to convert a few characters.
        Dim UseBufferSize As Integer = 64
        If UseBufferSize < enc.GetMaxCharCount(10) Then
            UseBufferSize = enc.GetMaxCharCount(10)
        End If
        Dim chars(UseBufferSize) As Char
        
        ' Intentionally make the input byte buffer larger than the output character buffer so the 
        ' conversion loop executes more than one cycle. 
        Dim bytes(UseBufferSize * 4) As Byte
        Dim bytesRead As Integer
        Do
            ' Read at most the number of bytes that will fit in the input buffer. The 
            ' return value is the actual number of bytes read, or zero if no bytes remain. 
            bytesRead = inputFile.Read(bytes, 0, UseBufferSize * 4)
            
            Dim completed As Boolean = False
            Dim byteIndex As Integer = 0
            Dim bytesUsed As Integer
            Dim charsUsed As Integer
            
            While Not completed
                ' If this is the last input data, flush the decoder's internal buffer and state.
                Dim flush As Boolean = bytesRead = 0
                decoder.Convert(bytes, byteIndex, bytesRead - byteIndex, chars, 0, UseBufferSize, flush, bytesUsed, charsUsed, completed)
                
                ' The conversion produced the number of characters indicated by charsUsed. Write that number
                ' of characters to the output file.
                outputFile.Write(chars, 0, charsUsed)
                
                ' Increment byteIndex to the next block of bytes in the input buffer, if any, to convert.
                byteIndex += bytesUsed
            End While
        Loop While bytesRead <> 0
        
        outputFile.Close()
        fs.Close()
        inputFile.Close()
    
    End Sub
    
    ' --------------------------------------------------------------------------------------------
    ' Create a large file of UTF-16 encoded Unicode characters. 
    ' --------------------------------------------------------------------------------------------
    Shared Sub CreateTestFile(ByVal FileName As String) 
        ' StreamWriter defaults to UTF-8 encoding so explicitly specify Unicode, that is, 
        ' UTF-16, encoding.
        Dim file As New StreamWriter(FileName, False, Encoding.Unicode)
        
        ' Write a line of text 100 times.
        Dim i As Integer
        For i = 0 To 99
            file.WriteLine("This is an example input file used by the convert example.")
        Next i
        
        ' Write Unicode characters from U+0000 to, but not including, the surrogate character range.
        Dim c As Integer
        For c = 0 To &HD800
            file.Write(ChrW(c))
        Next c
        file.Close()
    
    End Sub
End Class

'
'This code example produces the following results:
'
'(Execute the -dir- console window command and examine the files created.)
'
'Example.txt, which contains 122,594 bytes (61,297 UTF-16 encoded characters).
'UTF8.txt, which contains 169,712 UTF-8 encoded bytes.
'UTF16.txt, which contains 122,594 bytes (61,297 UTF-16 encoded characters).
'
'(Execute the -comp- console window command and compare the two Unicode files.)
'
'>comp example.txt utf16.txt /L
'Comparing example.txt and utf16.txt...
'Files compare OK
'
'(The two files are equal.)
'

備註

適用於

Encoder.Convert 方法

定義

多載

Convert(ReadOnlySpan<Char>, Span<Byte>, Boolean, Int32, Int32, Boolean)

參數

備註

適用於

Convert(Char*, Int32, Byte*, Int32, Boolean, Int32, Int32, Boolean)

參數

例外狀況

備註

適用於

Convert(Char[], Int32, Int32, Byte[], Int32, Int32, Boolean, Int32, Int32, Boolean)

參數

例外狀況

範例

備註

適用於

其他資源

Convert(Char, Int32, Byte, Int32, Boolean, Int32, Int32, Boolean)