共用方式為


Application.LocalUserAppDataPath 屬性

定義

取得本機非漫遊使用者的應用程式資料路徑。

public:
 static property System::String ^ LocalUserAppDataPath { System::String ^ get(); };
public static string LocalUserAppDataPath { get; }
member this.LocalUserAppDataPath : string
Public Shared ReadOnly Property LocalUserAppDataPath As String

屬性值

String

本機非漫遊使用者的應用程式資料路徑。

範例

下列程式碼範例會顯示兩個表單,並在兩個表單關閉時結束應用程式。 當應用程式啟動和結束時,會記住每個表單的位置。 雖然此範例示範如何使用 UserAppDataPath 屬性來儲存使用者的應用程式資料, LocalUserAppDataPath 但可以改用 。

類別 MyApplicationContext 繼承自 ApplicationContext ,並追蹤每個表單關閉的時間,並在兩者都是時結束目前的執行緒。 類別會儲存使用者每個表單的位置。 表單位置資料會儲存在標題 Appdata.txt 為 的檔案中,該檔案會建立在 所 UserAppDataPath 決定的位置中。 方法會 Main 呼叫 Application.Run(context) ,以在指定 的情況下 ApplicationContext 啟動應用程式。

此程式碼是類別概觀中所顯示範例的 ApplicationContext 摘錄。 為了簡潔起見,不會顯示某些程式碼。 如需整個程式代碼清單,請參閱 ApplicationContext

   MyApplicationContext()
   {
      _formCount = 0;
      
      // Handle the ApplicationExit event to know when the application is exiting.
      Application::ApplicationExit += gcnew EventHandler( this, &MyApplicationContext::OnApplicationExit );
      try
      {
         
         // Create a file that the application will store user specific data in.
         _userData = gcnew FileStream( String::Concat( Application::UserAppDataPath, "\\appdata.txt" ),FileMode::OpenOrCreate );
      }
      catch ( IOException^ e ) 
      {
         
         // Inform the user that an error occurred.
         MessageBox::Show( "An error occurred while attempting to show the application. The error is: {0}", dynamic_cast<String^>(e) );
         
         // Exit the current thread instead of showing the windows.
         ExitThread();
      }

      
      // Create both application forms and handle the Closed event
      // to know when both forms are closed.
      _form1 = gcnew AppForm1;
      _form1->Closed += gcnew EventHandler( this, &MyApplicationContext::OnFormClosed );
      _form1->Closing += gcnew CancelEventHandler( this, &MyApplicationContext::OnFormClosing );
      _formCount++;
      _form2 = gcnew AppForm2;
      _form2->Closed += gcnew EventHandler( this, &MyApplicationContext::OnFormClosed );
      _form2->Closing += gcnew CancelEventHandler( this, &MyApplicationContext::OnFormClosing );
      _formCount++;
      
      // Get the form positions based upon the user specific data.
      if ( ReadFormDataFromFile() )
      {
         
         // If the data was read from the file, set the form
         // positions manually.
         _form1->StartPosition = FormStartPosition::Manual;
         _form2->StartPosition = FormStartPosition::Manual;
         _form1->Bounds = _form1Position;
         _form2->Bounds = _form2Position;
      }

      
      // Show both forms.
      _form1->Show();
      _form2->Show();
   }

   void OnApplicationExit( Object^ /*sender*/, EventArgs^ /*e*/ )
   {
      
      // When the application is exiting, write the application data to the
      // user file and close it.
      WriteFormDataToFile();
      try
      {
         
         // Ignore any errors that might occur while closing the file handle.
         _userData->Close();
      }
      catch ( Exception^ ) 
      {
      }

   }

private:
private MyApplicationContext()
{
    _formCount = 0;

    // Handle the ApplicationExit event to know when the application is exiting.
    Application.ApplicationExit += new EventHandler(this.OnApplicationExit);

    try
    {
        // Create a file that the application will store user specific data in.
        _userData = new FileStream(Application.UserAppDataPath + "\\appdata.txt", FileMode.OpenOrCreate);
    }
    catch (IOException e)
    {
        // Inform the user that an error occurred.
        MessageBox.Show("An error occurred while attempting to show the application." +
                        "The error is:" + e.ToString());

        // Exit the current thread instead of showing the windows.
        ExitThread();
    }

    // Create both application forms and handle the Closed event
    // to know when both forms are closed.
    _form1 = new AppForm1();
    _form1.Closed += new EventHandler(OnFormClosed);
    _form1.Closing += new CancelEventHandler(OnFormClosing);
    _formCount++;

    _form2 = new AppForm2();
    _form2.Closed += new EventHandler(OnFormClosed);
    _form2.Closing += new CancelEventHandler(OnFormClosing);
    _formCount++;

    // Get the form positions based upon the user specific data.
    if (ReadFormDataFromFile())
    {
        // If the data was read from the file, set the form
        // positions manually.
        _form1.StartPosition = FormStartPosition.Manual;
        _form2.StartPosition = FormStartPosition.Manual;

        _form1.Bounds = _form1Position;
        _form2.Bounds = _form2Position;
    }

    // Show both forms.
    _form1.Show();
    _form2.Show();
}

private void OnApplicationExit(object sender, EventArgs e)
{
    // When the application is exiting, write the application data to the
    // user file and close it.
    WriteFormDataToFile();

    try
    {
        // Ignore any errors that might occur while closing the file handle.
        _userData.Close();
    }
    catch { }
}
Public Sub New()
    MyBase.New()
    _formCount = 0

    ' Handle the ApplicationExit event to know when the application is exiting.
    AddHandler Application.ApplicationExit, AddressOf OnApplicationExit

    Try
        ' Create a file that the application will store user specific data in.
        _userData = New FileStream(Application.UserAppDataPath + "\appdata.txt", FileMode.OpenOrCreate)

    Catch e As IOException
        ' Inform the user that an error occurred.
        MessageBox.Show("An error occurred while attempting to show the application." +
                        "The error is:" + e.ToString())

        ' Exit the current thread instead of showing the windows.
        ExitThread()
    End Try

    ' Create both application forms and handle the Closed event
    ' to know when both forms are closed.
    _form1 = New AppForm1()
    AddHandler _form1.Closed, AddressOf OnFormClosed
    AddHandler _form1.Closing, AddressOf OnFormClosing
    _formCount = _formCount + 1

    _form2 = New AppForm2()
    AddHandler _form2.Closed, AddressOf OnFormClosed
    AddHandler _form2.Closing, AddressOf OnFormClosing
    _formCount = _formCount + 1

    ' Get the form positions based upon the user specific data.
    If (ReadFormDataFromFile()) Then
        ' If the data was read from the file, set the form
        ' positions manually.
        _form1.StartPosition = FormStartPosition.Manual
        _form2.StartPosition = FormStartPosition.Manual

        _form1.Bounds = _form1Position
        _form2.Bounds = _form2Position
    End If

    ' Show both forms.
    _form1.Show()
    _form2.Show()
End Sub

Private Sub OnApplicationExit(ByVal sender As Object, ByVal e As EventArgs)
    ' When the application is exiting, write the application data to the
    ' user file and close it.
    WriteFormDataToFile()

    Try
        ' Ignore any errors that might occur while closing the file handle.
        _userData.Close()
    Catch
    End Try
End Sub

備註

本機使用者是使用者設定檔儲存在使用者登入之系統上的本機使用者。 如果路徑不存在,則會以下列格式建立路徑:

基底路徑\CompanyName\ProductName\ProductVersion

典型的基底路徑為 C:\Documents,設定 \ username\Local 設定\Application Data。 不過,如果使用 ClickOnce 部署Windows Forms應用程式,則此路徑會有所不同。 ClickOnce會建立與其所有其他應用程式隔離的應用程式資料目錄。 如需詳細資訊,請參閱在 ClickOnce 應用程式中存取本機和遠端資料

適用於