共用方式為


NumericUpDown.Increment 屬性

定義

取得或設定當按一下向上或向下按鈕時,會遞增或遞減微調方塊 (也稱為上下按鈕控制項) 的數值。

public:
 property System::Decimal Increment { System::Decimal get(); void set(System::Decimal value); };
public decimal Increment { get; set; }
member this.Increment : decimal with get, set
Public Property Increment As Decimal

屬性值

當按一下微調方塊的向上或向下按鈕時,會遞增或遞減 Value 屬性的數值。 預設值為 1。

例外狀況

指定的值不大於或等於零。

範例

下列程式碼範例會建立和初始化 NumericUpDown 控制項、設定其一些通用屬性,並允許使用者在執行時間變更其中一些屬性。 此程式碼假設已將三 CheckBox 個控制項放在表單上,並已具現化其 Click 事件的處理常式。 DecimalPlacesThousandsSeparatorHexadecimal 屬性會在每個核取方塊的事件上 Click 設定。

public:
   void InstantiateMyNumericUpDown()
   {
      // Create and initialize a NumericUpDown control.
      numericUpDown1 = gcnew NumericUpDown;
      
      // Dock the control to the top of the form.
      numericUpDown1->Dock = System::Windows::Forms::DockStyle::Top;
      
      // Set the Minimum, Maximum, and initial Value.
      numericUpDown1->Value = 5;
      numericUpDown1->Maximum = 2500;
      numericUpDown1->Minimum = -100;
      
      // Add the NumericUpDown to the Form.
      Controls->Add( numericUpDown1 );
   }

private:
   // Check box to toggle decimal places to be displayed.
   void checkBox1_Click( Object^ sender, EventArgs^ e )
   {
      /* If DecimalPlaces is greater than 0, set them to 0 and round the 
         current Value; otherwise, set DecimalPlaces to 2 and change the 
         Increment to 0.25. */
      if ( numericUpDown1->DecimalPlaces > 0 )
      {
         numericUpDown1->DecimalPlaces = 0;
         numericUpDown1->Value = Decimal::Round( numericUpDown1->Value, 0 );
      }
      else
      {
         numericUpDown1->DecimalPlaces = 2;
         numericUpDown1->Increment = Decimal(0.25);
      }
   }

   // Check box to toggle thousands separators to be displayed.
   void checkBox2_Click( Object^ sender, EventArgs^ e )
   {
      /* If ThousandsSeparator is true, set it to false; 
         otherwise, set it to true. */
      if ( numericUpDown1->ThousandsSeparator )
      {
         numericUpDown1->ThousandsSeparator = false;
      }
      else
      {
         numericUpDown1->ThousandsSeparator = true;
      }
   }

   // Check box to toggle hexadecimal to be displayed.
   void checkBox3_Click( Object^ sender, EventArgs^ e )
   {
      /* If Hexadecimal is true, set it to false; 
         otherwise, set it to true. */
      if ( numericUpDown1->Hexadecimal )
      {
         numericUpDown1->Hexadecimal = false;
      }
      else
      {
         numericUpDown1->Hexadecimal = true;
      }
   }
public void InstantiateMyNumericUpDown()
{
   // Create and initialize a NumericUpDown control.
   numericUpDown1 = new NumericUpDown();

   // Dock the control to the top of the form.
   numericUpDown1.Dock = System.Windows.Forms.DockStyle.Top;

   // Set the Minimum, Maximum, and initial Value.
   numericUpDown1.Value = 5;
   numericUpDown1.Maximum = 2500;
   numericUpDown1.Minimum = -100;
   
   // Add the NumericUpDown to the Form.
   Controls.Add(numericUpDown1);
}

// Check box to toggle decimal places to be displayed.
private void checkBox1_Click(Object sender,
                             EventArgs e)
{
   /* If DecimalPlaces is greater than 0, set them to 0 and round the 
      current Value; otherwise, set DecimalPlaces to 2 and change the 
      Increment to 0.25. */
   if (numericUpDown1.DecimalPlaces > 0)
   {
      numericUpDown1.DecimalPlaces = 0;
      numericUpDown1.Value = Decimal.Round(numericUpDown1.Value, 0);
   }
   else
   {
      numericUpDown1.DecimalPlaces = 2;
      numericUpDown1.Increment = 0.25M;
   }
}

// Check box to toggle thousands separators to be displayed.
private void checkBox2_Click(Object sender,
                             EventArgs e)
{   
   /* If ThousandsSeparator is true, set it to false; 
      otherwise, set it to true. */
   if (numericUpDown1.ThousandsSeparator)
   {
      numericUpDown1.ThousandsSeparator = false;
   }
   else
   {
      numericUpDown1.ThousandsSeparator = true;
   }
}

// Check box to toggle hexadecimal to be displayed.
private void checkBox3_Click(Object sender, 
                             EventArgs e)
{
   /* If Hexadecimal is true, set it to false; 
      otherwise, set it to true. */    
   if (numericUpDown1.Hexadecimal)
   {
      numericUpDown1.Hexadecimal = false;
   }
   else
   {
      numericUpDown1.Hexadecimal = true;
   }
}
Public Sub InstantiateMyNumericUpDown()
    ' Create and initialize a NumericUpDown control.
    numericUpDown1 = New NumericUpDown()
    
    ' Dock the control to the top of the form.
    numericUpDown1.Dock = System.Windows.Forms.DockStyle.Top
    
    ' Set the Minimum, Maximum, and initial Value.
    numericUpDown1.Value = 5
    numericUpDown1.Maximum = 2500
    numericUpDown1.Minimum = - 100
    
    ' Add the NumericUpDown to the Form.
    Controls.Add(numericUpDown1)
End Sub    

' Check box to toggle decimal places to be displayed.
Private Sub checkBox1_Click(sender As Object, e As EventArgs)
    ' If DecimalPlaces is greater than 0, set them to 0 and round the
    ' current Value; otherwise, set DecimalPlaces to 2 and change the
    ' Increment to 0.25. 
    If numericUpDown1.DecimalPlaces > 0 Then
        numericUpDown1.DecimalPlaces = 0
        numericUpDown1.Value = Decimal.Round(numericUpDown1.Value, 0)
    Else
        numericUpDown1.DecimalPlaces = 2
        numericUpDown1.Increment = 0.25D
    End If
End Sub    

' Check box to toggle thousands separators to be displayed.
Private Sub checkBox2_Click(sender As Object, e As EventArgs)
    ' If ThousandsSeparator is true, set it to false;
    ' otherwise, set it to true. 
    If numericUpDown1.ThousandsSeparator Then
        numericUpDown1.ThousandsSeparator = False
    Else
        numericUpDown1.ThousandsSeparator = True
    End If
End Sub    

' Check box to toggle hexadecimal to be displayed.
Private Sub checkBox3_Click(sender As Object, e As EventArgs)
    ' If Hexadecimal is true, set it to false;
    ' otherwise, set it to true. 
    If numericUpDown1.Hexadecimal Then
        numericUpDown1.Hexadecimal = False
    Else
        numericUpDown1.Hexadecimal = True
    End If
End Sub

備註

按一下向上按鈕會使 Value 屬性遞增屬性所 Increment 指定的數量,並接近 Maximum 屬性。 按一下向下按鈕會使 Value 屬性遞減屬性所 Increment 指定的數量,並接近 Minimum 屬性。

適用於

另請參閱