Share via


az dns-resolver inbound-endpoint

Note

This reference is part of the dns-resolver extension for the Azure CLI (version 2.39.0 or higher). The extension will automatically install the first time you run an az dns-resolver inbound-endpoint command. Learn more about extensions.

Manage inbound endpoint with dns resolver.

Commands

Name Description Type Status
az dns-resolver inbound-endpoint create

Create an inbound endpoint for a DNS resolver.

Extension GA
az dns-resolver inbound-endpoint delete

Deletes an inbound endpoint for a DNS resolver. WARNING: This operation cannot be undone.

Extension GA
az dns-resolver inbound-endpoint list

Lists inbound endpoints for a DNS resolver.

Extension GA
az dns-resolver inbound-endpoint show

Gets properties of an inbound endpoint for a DNS resolver.

Extension GA
az dns-resolver inbound-endpoint update

Updates an inbound endpoint for a DNS resolver.

Extension GA
az dns-resolver inbound-endpoint wait

Place the CLI in a waiting state until a condition is met.

Extension GA

az dns-resolver inbound-endpoint create

Create an inbound endpoint for a DNS resolver.

az dns-resolver inbound-endpoint create --dns-resolver-name
                                        --inbound-endpoint-name
                                        --ip-configurations
                                        --resource-group
                                        [--if-match]
                                        [--if-none-match]
                                        [--location]
                                        [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                        [--tags]

Examples

Upsert inbound endpoint for DNS resolver

az dns-resolver inbound-endpoint create --dns-resolver-name "sampleDnsResolver" --name "sampleInboundEndpoint" --location "westus2" --ip-configurations [{private-ip-address:'',private-ip-allocation-method:"Dynamic",id:"/subscriptions/0403cfa9-9659-4f33-9f30-1f191c51d111/resourceGroups/sampleVnetResourceGroupName/providers/Microsoft.Network/virtualNetworks/sa mpleVirtualNetwork/subnets/sampleSubnet"}] --tags key1="value1" --resource-group "sampleResourceGroup"

Required Parameters

--dns-resolver-name

The name of the DNS resolver.

--inbound-endpoint-name --name -n

The name of the inbound endpoint for the DNS resolver.

--ip-configurations

IP configurations for the inbound endpoint. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--if-match

ETag of the resource. Omit this value to always overwrite the current resource. Specify the last-seen ETag value to prevent accidentally overwriting any concurrent changes.

--if-none-match

Set to '*' to allow a new resource to be created, but to prevent updating an existing resource. Other values will be ignored.

--location -l

Location. Values from: az account list-locations. You can configure the default location using az configure --defaults location=<location>. When not specified, the location of the resource group will be used.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--tags

Space-separated tags: key[=value] [key[=value] ...]. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az dns-resolver inbound-endpoint delete

Deletes an inbound endpoint for a DNS resolver. WARNING: This operation cannot be undone.

az dns-resolver inbound-endpoint delete [--dns-resolver-name]
                                        [--ids]
                                        [--if-match]
                                        [--inbound-endpoint-name]
                                        [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                        [--resource-group]
                                        [--subscription]
                                        [--yes]

Examples

Delete inbound endpoint for DNS resolver

az dns-resolver inbound-endpoint delete --dns-resolver-name "sampleDnsResolver" --name "sampleInboundEndpoint" --resource-group "sampleResourceGroup"

Optional Parameters

--dns-resolver-name

The name of the DNS resolver.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--if-match

ETag of the resource. Omit this value to always overwrite the current resource. Specify the last-seen ETag value to prevent accidentally overwriting any concurrent changes.

--inbound-endpoint-name --name -n

The name of the inbound endpoint for the DNS resolver.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--yes -y

Do not prompt for confirmation.

Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az dns-resolver inbound-endpoint list

Lists inbound endpoints for a DNS resolver.

az dns-resolver inbound-endpoint list --dns-resolver-name
                                      --resource-group
                                      [--top]

Examples

List inbound endpoints by DNS resolver

az dns-resolver inbound-endpoint list --dns-resolver-name "sampleDnsResolver" --resource- group "sampleResourceGroup"

Required Parameters

--dns-resolver-name

The name of the DNS resolver.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--top

The maximum number of results to return. If not specified, returns up to 100 results.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az dns-resolver inbound-endpoint show

Gets properties of an inbound endpoint for a DNS resolver.

az dns-resolver inbound-endpoint show [--dns-resolver-name]
                                      [--ids]
                                      [--inbound-endpoint-name]
                                      [--resource-group]
                                      [--subscription]

Examples

Retrieve inbound endpoint for DNS resolver

az dns-resolver inbound-endpoint show --dns-resolver-name "sampleDnsResolver" --name "sampleInboundEndpoint" --resource-group "sampleResourceGroup"

Optional Parameters

--dns-resolver-name

The name of the DNS resolver.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--inbound-endpoint-name --name -n

The name of the inbound endpoint for the DNS resolver.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az dns-resolver inbound-endpoint update

Updates an inbound endpoint for a DNS resolver.

az dns-resolver inbound-endpoint update [--dns-resolver-name]
                                        [--ids]
                                        [--if-match]
                                        [--inbound-endpoint-name]
                                        [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                        [--resource-group]
                                        [--subscription]
                                        [--tags]

Examples

Update inbound endpoint for DNS resolver

az dns-resolver inbound-endpoint update --dns-resolver-name "sampleDnsResolver" --name "sampleInboundEndpoint" --tags key1="value1" --resource-group "sampleResourceGroup"

Optional Parameters

--dns-resolver-name

The name of the DNS resolver.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--if-match

ETag of the resource. Omit this value to always overwrite the current resource. Specify the last-seen ETag value to prevent accidentally overwriting any concurrent changes.

--inbound-endpoint-name --name -n

The name of the inbound endpoint for the DNS resolver.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--tags

Space-separated tags: key[=value] [key[=value] ...]. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az dns-resolver inbound-endpoint wait

Place the CLI in a waiting state until a condition is met.

az dns-resolver inbound-endpoint wait [--created]
                                      [--custom]
                                      [--deleted]
                                      [--dns-resolver-name]
                                      [--exists]
                                      [--ids]
                                      [--inbound-endpoint-name]
                                      [--interval]
                                      [--resource-group]
                                      [--subscription]
                                      [--timeout]
                                      [--updated]

Optional Parameters

--created

Wait until created with 'provisioningState' at 'Succeeded'.

Default value: False
--custom

Wait until the condition satisfies a custom JMESPath query. E.g. provisioningState!='InProgress', instanceView.statuses[?code=='PowerState/running'].

--deleted

Wait until deleted.

Default value: False
--dns-resolver-name

The name of the DNS resolver.

--exists

Wait until the resource exists.

Default value: False
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--inbound-endpoint-name --name -n

The name of the inbound endpoint for the DNS resolver.

--interval

Polling interval in seconds.

Default value: 30
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--timeout

Maximum wait in seconds.

Default value: 3600
--updated

Wait until updated with provisioningState at 'Succeeded'.

Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.