TypeBuilder.MakeArrayType Metoda

Definice

Obor názvů:

System.Reflection.Emit

Sestavení:

System.Reflection.Emit.dll

Balíček:

System.Reflection.Emit v4.7.0

Type Vrátí objekt, který představuje pole aktuálního typu.

Přetížení

MakeArrayType(Int32)	Type Vrátí objekt, který představuje pole aktuálního typu se zadaným počtem dimenzí.
MakeArrayType()	Type Vrátí objekt, který představuje jednorozměrné pole aktuálního typu s dolní nulou.

MakeArrayType(Int32)

Zdroj:

TypeBuilder.cs

Type Vrátí objekt, který představuje pole aktuálního typu se zadaným počtem dimenzí.

public:
 override Type ^ MakeArrayType(int rank);

public override Type MakeArrayType (int rank);

override this.MakeArrayType : int -> Type

Public Overrides Function MakeArrayType (rank As Integer) As Type

Parametry

rank

Int32

Počet dimenzí pole.

Návraty

Type

Objekt Type , který představuje jednorozměrné pole aktuálního typu.

Výjimky

IndexOutOfRangeException

rank není platná dimenze pole.

Příklady

Následující příklad kódu vytvoří dynamický modul, abstraktní typ s názvem Samplea abstraktní metodu s názvem TestMethod. TestMethodref přebírá parametr (ByRef v jazyce Visual Basic) typu Sample, ukazatel na typ Samplea pole typu Sample. Vrátí dvojrozměrné pole typu Sample. Příklad kódu uloží dynamický modul na disk, takže ho můžete prozkoumat pomocíIldasm.exe (IL Disassembler).

using System;
using System.Reflection;
using System.Reflection.Emit;
using Microsoft.VisualBasic;

public class Example
{
    public static void Main()
    {
        // Define a dynamic assembly to contain the sample type. The
        // assembly will not be run, but only saved to disk, so
        // AssemblyBuilderAccess.Save is specified.
        //
        AppDomain myDomain = AppDomain.CurrentDomain;
        AssemblyName myAsmName = new AssemblyName("MakeXxxTypeExample");
        AssemblyBuilder myAssembly = myDomain.DefineDynamicAssembly(
            myAsmName,
            AssemblyBuilderAccess.Save);

        // An assembly is made up of executable modules. For a single-
        // module assembly, the module name and file name are the same
        // as the assembly name.
        //
        ModuleBuilder myModule = myAssembly.DefineDynamicModule(
            myAsmName.Name,
            myAsmName.Name + ".dll");

        // Define the sample type.
        TypeBuilder myType = myModule.DefineType(
            "Sample",
            TypeAttributes.Public | TypeAttributes.Abstract);

        // Define a method that takes a ref argument of type Sample,
        // a pointer to type Sample, and an array of Sample objects. The
        // method returns a two-dimensional array of Sample objects.
        //
        // To create this method, you need Type objects that represent the
        // parameter types and the return type. Use the MakeByRefType,
        // MakePointerType, and MakeArrayType methods to create the Type
        // objects.
        //
        Type byRefMyType = myType.MakeByRefType();
        Type pointerMyType = myType.MakePointerType();
        Type arrayMyType = myType.MakeArrayType();
        Type twoDimArrayMyType = myType.MakeArrayType(2);

        // Create the array of parameter types.
        Type[] parameterTypes = {byRefMyType, pointerMyType, arrayMyType};

        // Define the abstract Test method. After you have compiled
        // and run this code example code, you can use ildasm.exe
        // to open MakeXxxTypeExample.dll, examine the Sample type,
        // and verify the parameter types and return type of the
        // TestMethod method.
        //
        MethodBuilder myMethodBuilder = myType.DefineMethod(
            "TestMethod",
            MethodAttributes.Abstract | MethodAttributes.Virtual
                | MethodAttributes.Public,
            twoDimArrayMyType,
            parameterTypes);

        // Create the type and save the assembly. For a single-file
        // assembly, there is only one module to store the manifest
        // information in.
        //
        myType.CreateType();
        myAssembly.Save(myAsmName.Name + ".dll");
    }
}

Imports System.Reflection
Imports System.Reflection.Emit

Public Class Example
    Public Shared Sub Main()
        ' Define a dynamic assembly to contain the sample type. The
        ' assembly will not be run, but only saved to disk, so
        ' AssemblyBuilderAccess.Save is specified.
        '
        Dim myDomain As AppDomain = AppDomain.CurrentDomain
        Dim myAsmName As New AssemblyName("MakeXxxTypeExample")
        Dim myAssembly As AssemblyBuilder = myDomain.DefineDynamicAssembly( _
            myAsmName, _
            AssemblyBuilderAccess.Save)

        ' An assembly is made up of executable modules. For a single-
        ' module assembly, the module name and file name are the same 
        ' as the assembly name. 
        '
        Dim myModule As ModuleBuilder = myAssembly.DefineDynamicModule( _
            myAsmName.Name, _
            myAsmName.Name & ".dll")

        ' Define the sample type.
        Dim myType As TypeBuilder = myModule.DefineType( _
            "Sample", _
            TypeAttributes.Public Or TypeAttributes.Abstract)

        ' Define a method that takes a ByRef argument of type Sample,
        ' a pointer to type Sample, and an array of Sample objects. The
        ' method returns a two-dimensional array of Sample objects.
        '
        ' To create this method, you need Type objects that represent the
        ' parameter types and the return type. Use the MakeByRefType, 
        ' MakePointerType, and MakeArrayType methods to create the Type
        ' objects.
        '
        Dim byRefMyType As Type = myType.MakeByRefType
        Dim pointerMyType As Type = myType.MakePointerType
        Dim arrayMyType As Type = myType.MakeArrayType
        Dim twoDimArrayMyType As Type = myType.MakeArrayType(2)

        ' Create the array of parameter types.
        Dim parameterTypes() As Type = _
            {byRefMyType, pointerMyType, arrayMyType}

        ' Define the abstract Test method. After you have compiled
        ' and run this code example code, you can use ildasm.exe 
        ' to open MakeXxxTypeExample.dll, examine the Sample type,
        ' and verify the parameter types and return type of the
        ' TestMethod method.
        '
        Dim myMethodBuilder As MethodBuilder = myType.DefineMethod( _
            "TestMethod", _
            MethodAttributes.Abstract Or MethodAttributes.Virtual _
                Or MethodAttributes.Public, _
            twoDimArrayMyType, _
            parameterTypes)

        ' Create the type and save the assembly. For a single-file 
        ' assembly, there is only one module to store the manifest 
        ' information in.
        '
        myType.CreateType()
        myAssembly.Save(myAsmName.Name & ".dll")

    End Sub
End Class

Poznámky

Metoda MakeArrayType poskytuje způsob, jak vygenerovat typ pole s libovolným možným typem elementu, včetně obecných typů.

Viz také

• MakeByRefType()
• MakePointerType()

MakeArrayType()

Zdroj:

TypeBuilder.cs

Type Vrátí objekt, který představuje jednorozměrné pole aktuálního typu s dolní nulou.

public:
 override Type ^ MakeArrayType();

public override Type MakeArrayType ();

override this.MakeArrayType : unit -> Type

Public Overrides Function MakeArrayType () As Type

Návraty

Type

Objekt Type představující jednorozměrný typ pole, jehož typ prvku je aktuálním typem, s dolní hranici nuly.

Příklady

Následující příklad kódu vytvoří dynamický modul, abstraktní typ s názvem Samplea abstraktní metodu s názvem TestMethod. TestMethodref přebírá parametr (ByRef v jazyce Visual Basic) typu Sample, ukazatel na typ Samplea pole typu Sample. Vrátí dvojrozměrné pole typu Sample. Příklad kódu uloží dynamický modul na disk, takže ho můžete prozkoumat pomocíIldasm.exe (IL Disassembler).

using System;
using System.Reflection;
using System.Reflection.Emit;
using Microsoft.VisualBasic;

public class Example
{
    public static void Main()
    {
        // Define a dynamic assembly to contain the sample type. The
        // assembly will not be run, but only saved to disk, so
        // AssemblyBuilderAccess.Save is specified.
        //
        AppDomain myDomain = AppDomain.CurrentDomain;
        AssemblyName myAsmName = new AssemblyName("MakeXxxTypeExample");
        AssemblyBuilder myAssembly = myDomain.DefineDynamicAssembly(
            myAsmName,
            AssemblyBuilderAccess.Save);

        // An assembly is made up of executable modules. For a single-
        // module assembly, the module name and file name are the same
        // as the assembly name.
        //
        ModuleBuilder myModule = myAssembly.DefineDynamicModule(
            myAsmName.Name,
            myAsmName.Name + ".dll");

        // Define the sample type.
        TypeBuilder myType = myModule.DefineType(
            "Sample",
            TypeAttributes.Public | TypeAttributes.Abstract);

        // Define a method that takes a ref argument of type Sample,
        // a pointer to type Sample, and an array of Sample objects. The
        // method returns a two-dimensional array of Sample objects.
        //
        // To create this method, you need Type objects that represent the
        // parameter types and the return type. Use the MakeByRefType,
        // MakePointerType, and MakeArrayType methods to create the Type
        // objects.
        //
        Type byRefMyType = myType.MakeByRefType();
        Type pointerMyType = myType.MakePointerType();
        Type arrayMyType = myType.MakeArrayType();
        Type twoDimArrayMyType = myType.MakeArrayType(2);

        // Create the array of parameter types.
        Type[] parameterTypes = {byRefMyType, pointerMyType, arrayMyType};

        // Define the abstract Test method. After you have compiled
        // and run this code example code, you can use ildasm.exe
        // to open MakeXxxTypeExample.dll, examine the Sample type,
        // and verify the parameter types and return type of the
        // TestMethod method.
        //
        MethodBuilder myMethodBuilder = myType.DefineMethod(
            "TestMethod",
            MethodAttributes.Abstract | MethodAttributes.Virtual
                | MethodAttributes.Public,
            twoDimArrayMyType,
            parameterTypes);

        // Create the type and save the assembly. For a single-file
        // assembly, there is only one module to store the manifest
        // information in.
        //
        myType.CreateType();
        myAssembly.Save(myAsmName.Name + ".dll");
    }
}

Imports System.Reflection
Imports System.Reflection.Emit

Public Class Example
    Public Shared Sub Main()
        ' Define a dynamic assembly to contain the sample type. The
        ' assembly will not be run, but only saved to disk, so
        ' AssemblyBuilderAccess.Save is specified.
        '
        Dim myDomain As AppDomain = AppDomain.CurrentDomain
        Dim myAsmName As New AssemblyName("MakeXxxTypeExample")
        Dim myAssembly As AssemblyBuilder = myDomain.DefineDynamicAssembly( _
            myAsmName, _
            AssemblyBuilderAccess.Save)

        ' An assembly is made up of executable modules. For a single-
        ' module assembly, the module name and file name are the same 
        ' as the assembly name. 
        '
        Dim myModule As ModuleBuilder = myAssembly.DefineDynamicModule( _
            myAsmName.Name, _
            myAsmName.Name & ".dll")

        ' Define the sample type.
        Dim myType As TypeBuilder = myModule.DefineType( _
            "Sample", _
            TypeAttributes.Public Or TypeAttributes.Abstract)

        ' Define a method that takes a ByRef argument of type Sample,
        ' a pointer to type Sample, and an array of Sample objects. The
        ' method returns a two-dimensional array of Sample objects.
        '
        ' To create this method, you need Type objects that represent the
        ' parameter types and the return type. Use the MakeByRefType, 
        ' MakePointerType, and MakeArrayType methods to create the Type
        ' objects.
        '
        Dim byRefMyType As Type = myType.MakeByRefType
        Dim pointerMyType As Type = myType.MakePointerType
        Dim arrayMyType As Type = myType.MakeArrayType
        Dim twoDimArrayMyType As Type = myType.MakeArrayType(2)

        ' Create the array of parameter types.
        Dim parameterTypes() As Type = _
            {byRefMyType, pointerMyType, arrayMyType}

        ' Define the abstract Test method. After you have compiled
        ' and run this code example code, you can use ildasm.exe 
        ' to open MakeXxxTypeExample.dll, examine the Sample type,
        ' and verify the parameter types and return type of the
        ' TestMethod method.
        '
        Dim myMethodBuilder As MethodBuilder = myType.DefineMethod( _
            "TestMethod", _
            MethodAttributes.Abstract Or MethodAttributes.Virtual _
                Or MethodAttributes.Public, _
            twoDimArrayMyType, _
            parameterTypes)

        ' Create the type and save the assembly. For a single-file 
        ' assembly, there is only one module to store the manifest 
        ' information in.
        '
        myType.CreateType()
        myAssembly.Save(myAsmName.Name & ".dll")

    End Sub
End Class

Poznámky

Metoda MakeArrayType poskytuje způsob, jak vygenerovat typ pole s libovolným možným typem elementu, včetně obecných typů.

Viz také

• MakeByRefType()
• MakePointerType()