Integrate 3270 screen-driven apps on IBM mainframes with Azure by using Azure Logic Apps and IBM 3270 connector
This connector is in public preview.
With Azure Logic Apps and the IBM 3270 connector, you can access and run IBM mainframe apps that you usually drive by navigating through 3270 emulator screens. That way, you can integrate your IBM mainframe apps with Azure, Microsoft, and other apps, services, and systems by creating automated workflows with Azure Logic Apps. The connector communicates with IBM mainframes by using the TN3270 protocol and is available in all Azure Logic Apps regions except for Azure Government and Azure China 21Vianet. If you're new to logic apps, review What is Azure Logic Apps?
This article describes these aspects for using the 3270 connector:
Why use the IBM 3270 connector in Azure Logic Apps and how the connector runs 3270 screen-driven apps
The prerequisites and setup for using the 3270 connector
The steps for adding 3270 connector actions to your logic app
Why use this connector?
To access apps on IBM mainframes, you typically use a 3270 terminal emulator, often called a "green screen". This method is a time-tested way but has limitations. Although Host Integration Server (HIS) helps you work directly with these apps, sometimes, separating the screen and business logic might not be possible. Or, maybe you no longer have information for how the host applications work.
To extend these scenarios, the IBM 3270 connector in Azure Logic Apps works with the 3270 Design Tool, which you use to record, or "capture", the host screens used for a specific task, define the navigation flow for that task through your mainframe app, and define the methods with input and output parameters for that task. The design tool converts that information into metadata that the 3270 connector uses when calling an action that represents that task from your logic app.
After you generate the metadata file from the design tool, you add that file to an integration account in Azure. That way, your logic app can access your app's metadata when you add a 3270 connector action. The connector reads the metadata file from your integration account, handles navigation through the 3270 screens, and dynamically presents the parameters for the 3270 connector action. You can then provide data to the host application, and the connector returns the results to your logic app. That way, you can integrate your legacy apps with Azure, Microsoft, and other apps, services, and systems that Azure Logic Apps supports.
An Azure subscription. If you don't have an Azure subscription, sign up for a free Azure account.
Basic knowledge about how to create logic apps
Recommended: An integration service environment (ISE)
You can select this environment as the location for creating and running your logic app. An ISE provides access from your logic app to resources that are protected inside Azure virtual networks.
The logic app to use for automating and running your 3270 screen-driven app
The IBM 3270 connector doesn't have triggers, so use another trigger to start your logic app, such as the Recurrence trigger. You can then add 3270 connector actions. To get started, create a blank logic app. If you use an ISE, select that ISE as your logic app's location.
This tool helps you record the screens, navigation paths, methods, and parameters for the tasks in your app that you add and run as 3270 connector actions. The tool generates a Host Integration Designer XML (HIDX) file that provides the necessary metadata for the connector to use for driving your mainframe app.
After downloading and installing this tool, follow these steps for connecting to your host:
Open the 3270 Design Tool. From the Session menu, select Host Sessions.
Provide your TN3270 host server information.
An integration account, which is the place where you store your HIDX file as a map so your logic app can access the metadata and method definitions in that file.
Make sure your integration account is linked to the logic app you're using. Also, if you use an ISE, make sure your integration account's location is the same ISE that your logic app uses.
Access to the TN3270 server that hosts your mainframe app
Create metadata overview
In a 3270 screen-driven app, the screens and data fields are unique to your scenarios, so the 3270 connector needs this information about your app, which you can provide as metadata. This metadata describes information that helps your logic app identify and recognize screens, describes how to navigate between screens, where to input data, and where to expect results. To specify and generate this metadata, you use the 3270 Design Tool, which walks you through these specific modes, or stages, as described later in more details:
Capture: In this mode, you record the screens required for completing a specific task with your mainframe app, for example, getting a bank balance.
Navigation: In this mode, you specify the plan or path for how to navigate through your mainframe app's screens for the specific task.
Methods: In this mode, you define the method, for example,
GetBalance, that describes the screen navigation path. You also choose the fields on each screen that become the method's input and output parameters.
The design tool doesn't support these elements:
- Partial IBM Basic Mapping Support (BMS) maps: If you import a BMS map, the design tool ignores partial screen definitions.
- In/Out parameters: You can't define In/Out parameters.
- Menu processing: Not supported during preview
- Array processing: Not supported during preview
In this mode, you mark an item on each 3270 screen that uniquely identifies that screen. For example, you might specify a line of text or a more complex set of conditions, such as specific text and a non-empty field. You can either record these screens over a live connection to the host server, or import this information from an IBM Basic Mapping Support (BMS) map. The live connection uses a TN3270 emulator for connecting to the host. Each connector action must map to a single task that starts with connecting to your session and ends with disconnecting from your session.
If you haven't already, open the 3270 Design Tool. On the toolbar, choose Capture so that you enter Capture mode.
To start recording, press the F5 key, or from the Recording menu, select Start Recording.
From the Session menu, select Connect.
In the Capture pane, starting from the first screen in your app, step through your app for the specific task that you're recording.
After you finish the task, sign out from your app as you usually do.
From the Session menu, select Disconnect.
To stop recording, press the Shift + F5 keys, or from the Recording menu, select Stop Recording.
After you capture the screens for a task, the designer tool shows thumbnails that represent those screens. Some notes about these thumbnails:
Included with your captured screens, you have a screen that's named "Empty".
When you first connect to CICS, you must send the "Clear" key before you can enter the name for the transaction you want to run. The screen where you send the "Clear" key doesn't have any recognition attributes, such as a screen title, which you can add by using the Screen Recognition editor. To represent this screen, the thumbnails includes a screen named "Empty". You can later use this screen for representing the screen where you enter the transaction name.
By default, the name for a captured screen uses the first word on the screen. If that name already exists, the design tool appends the name with an underscore and a number, for example, "WBGB" and "WBGB_1".
To give a more meaningful name to a captured screen, follow these steps:
In the Host Screens pane, select the screen you want to rename.
In the same pane, near the bottom in the same pane, find the Screen Name property.
Change the current screen name to a more descriptive name.
Now specify the fields for identifying each screen.
With the 3270 data stream, screens don't have default identifiers, so you need to select unique text on each screen. For complex scenarios, you can specify multiple conditions, for example, unique text and a field with a specific condition.
After you finish selecting the recognition fields, move to the next mode.
Conditions for identifying repeated screens
For the connector to navigate and differentiate between screens, you usually find unique text on a screen that you can use as an identifier among the captured screens. For repeated screens, you might need more identification methods. For example, suppose you have two screens that look the same except one screen returns a valid value, while the other screen returns an error message.
In the design tool, you can add recognition attributes, for example, a screen title such as "Get Account Balance", by using the Screen Recognition editor. If you have a forked path and both branches return the same screen but with different results, you need other recognition attributes. At run time, the connector uses these attributes for determining the current branch and fork. Here are the conditions you can use:
- Specific value: This value matches the specified string at the specified location.
- NOT a specific value: This value doesn't match the specified string at the specified location.
- Empty: This field is empty.
- NOT empty: This field isn't empty.
To learn more, see the Example navigation plan later in this topic.
Define navigation plans
In this mode, you define the flow or steps for navigating
through your mainframe app's screens for your specific task.
For example, sometimes, you might have more than one path that
your app can take where one path produces the correct result,
while the other path produces an error. For each screen, specify the
keystrokes necessary for moving to the next screen, such as
If you're automating several tasks that use the same connect and disconnect screens, the design tool provides special Connect and Disconnect plan types. When you define these plans, you can add them to your navigation plan's beginning and end.
Guidelines for plan definitions
Include all screens, starting with connecting and ending with disconnecting.
You can create a standalone plan or use the Connect and Disconnect plans, which let you reuse a series of screens common to all your transactions.
The last screen in your Connect plan must be the same screen as the first screen in your navigation plan.
The first screen in your Disconnect plan must be same screen as the last screen in your navigation plan.
Your captured screens might contain many repeated screens, so select and use only one instance of any repeated screens in your plan. Here are some examples of repeated screens:
- The sign-in screen, for example, the MSG-10 screen
- The welcome screen for CICS
- The "Clear" or Empty screen
On the 3270 Design Tool's toolbar, choose Navigation so that you enter Navigation mode.
To start your plan, in the Navigation pane, choose New Plan.
Under Choose New Plan Name, enter a name for your plan. From the Type list, select the plan type:
Plan type Description Process For standalone or combined plans Connect For Connect plans Disconnect For Disconnect plans
From the Host Screens pane, drag the captured thumbnails to the navigation plan surface in the Navigation pane.
To represent the blank screen where you enter the transaction name, use the "Empty" screen.
Arrange the screens in the order that describes the task that you're defining.
To define the flow path between screens, including forks and joins, on the design tool's toolbar, choose Flow.
Choose the first screen in the flow. Drag and draw a connection to the next screen in the flow.
For each screen, provide the values for the AID Key property (Attention Identifier) and for the Fixed Text property, which moves the flow to the next screen.
You might have just the AID key, or both the AID key and fixed text.
After you finish your navigation plan, you can define methods in the next mode.
In this example, suppose you run a CICS transaction named "WBGB" that has these steps:
- On the first screen, you enter a name and an account.
- On the second screen, you get the account balance.
- You exit to the "Empty" screen.
- You sign out from CICS to the "MSG-10" screen.
Also suppose that you repeat these steps, but you enter incorrect data so you can capture the screen that shows the error. Here are the screens you capture:
- CICS Welcome
- WBGB_1 (input)
- WBGB_2 (error)
Although many screens here get unique names, some screens are the same screen, for example, "MSG-10" and "Empty". For a repeated screen, use only one instance for that screen in your plan. Here are examples that show how a standalone plan, Connect plan, Disconnect plan, and a combined plan might look:
Example: Identify repeated screens
For the connector to navigate and differentiate screens, you usually find unique text on a screen that you can use as an identifier across the captured screens. For repeated screens, you might need more identification methods. The example plan has a fork where you can get screens that look similar. One screen returns an account balance, while the other screen returns an error message.
The design tool lets you add recognition attributes, for example, a screen title named "Get Account Balance", by using the Screen Recognition editor. In the case with similar screens, you need other attributes. At run time, the connector uses these attributes for determining the branch and fork.
In the branch that returns valid input, which is the screen with the account balance, you can add a field that has a "not empty" condition.
In the branch that returns with an error, you can add a field that has an "empty" condition.
In this mode, you define a method that's associated with your navigation plan. For each method parameter, you specify the data type, such as a string, integer, date or time, and so on. When you're done, you can test your method on the live host and confirm that the method works as expected. You then generate the metadata file, or Host Integration Designer XML (HIDX) file, which now has the method definitions to use for creating and running an action for the IBM 3270 connector.
On the 3270 Design Tool's toolbar, choose Methods so that you enter Methods mode.
In the Navigation pane, select the screen that has the input fields you want.
To add the first input parameter for your method, follow these steps:
In the Capture pane, on the 3270 emulator screen, choose the whole field, not just text inside the field, that you want as the first input.
To display all the fields and make sure that you select the complete field, on the View menu, select All Fields.
On the design tool's toolbar, choose Input Field.
To add more input parameters, repeat the previous steps for each parameter.
To add the first output parameter for your method, follow these steps:
In the Capture pane, on the 3270 emulator screen, choose the whole field, not just text inside the field, that you want as the first output.
On the design tool's toolbar, choose Output Field.
To add more output parameters, repeat the previous steps for each parameter.
After you add all your method's parameters, define these properties for each parameter:
Property name Possible values Data Type Byte, Date Time, Decimal, Int, Long, Short, String Field Fill Technique Parameters support these fill types, filling with blanks if necessary:
- Type: Enter characters sequentially into the field.
- Fill: Replace the field's contents with characters, filling with blanks if necessary.
- EraseEofType: Clear the field, and then enter characters sequentially into the field.
Format String Some parameter data types use a format string, which informs the 3270 connector how to convert text from the screen into a .NET data type:
- DateTime: The DateTime format string follows the .NET custom date and time format strings. For example, the date
06/30/2019uses the format string
- Decimal: The decimal format string uses the COBOL Picture clause. For example, the number
100.35uses the format string
Save and view metadata
After you define your method, but before you test your method, save all the information that you defined so far to a RAP (.rap) file. You can save to this RAP file at any time during any mode. The design tool also includes a sample RAP file that you can open and review by browsing to the design tool's installation folder at this location and opening the "WoodgroveBank.rap" file:
..\Program Files\Microsoft Host Integration Server - 3270 Design Tool\SDK\WoodgroveBank.rap
However, if you try saving changes to the sample RAP file or generating an HIDX file from the sample RAP file while the file stays in the design tool's installation folder, you might get an "access denied" error. By default, the design tool installs in your Program Files folder without elevated permissions. If you get an error, try one of these solutions:
- Copy the sample file to a different location.
- Run the design tool as an administrator.
- Make yourself the owner for the SDK folder.
Test your method
To run your method against the live host, while still in Methods mode, press the F5 key, or from the design tool's toolbar, choose Run.
You can change modes at any time. On the File menu, select Mode, and then select the mode you want.
Enter your parameters' values, and choose OK.
To continue to the next screen, choose Next.
When you're finished, choose Done, which shows your output parameter values.
Generate and upload HIDX file
When you're ready, generate the HIDX file so you can upload to your integration account. The 3270 Design Tool creates the HIDX file in a new subfolder where you saved your RAP file.
On the 3270 Design Tool's toolbar, choose Generate Code.
Go to the folder that contains your RAP file, and open the subfolder that the tool created after generating your HIDX file. Confirm that the tool created the HIDX file.
Sign in to the Azure portal, and find your integration account.
Add your HIDX file as a map to your integration account by follow these similar steps for adding maps, but when you select the map type, select HIDX.
Later in this topic, when you add an IBM 3270 action to your logic app for the first time, you're prompted to create a connection between your logic app and the host server by providing connection information, such as the names for your integration account and host server. After you create the connection, you can select your previously added HIDX file, the method to run, and the parameters to use.
When you finish all these steps, you can use the action that you create in your logic app for connecting to your IBM mainframe, drive screens for your app, enter data, return results, and so on. You can also continue adding other actions to your logic app for integrating with other apps, services, and systems.
Run IBM 3270 actions
When you add a trigger or action that connects to a service or system for the first time, the Logic App Designer prompts you to create a connection by providing the necessary information, which varies based on the connection, for example:
- A name to use for the new connection
- The server or system name
- Your user or account credentials
- The authentication type to use
- The Azure subscription and name for the data gateway that you previously create when connecting to on-premises data sources
Sign in to the Azure portal, and open your logic app in Logic App Designer, if not open already.
Under the last step where you want to add an action, choose New step, and select Add an action.
Under the search box, choose Enterprise. In the search box, enter "3270" as your filter. From the actions list, select this action: Runs a mainframe program over a TN3270 connection
To add an action between steps, move your pointer over the arrow between steps. Choose the plus sign (+) that appears, and then select Add an action.
If no connection exists yet, provide the necessary information for your connection, and choose Create.
Property Required Value Description Connection Name Yes <connection-name> The name for your connection Integration Account ID Yes <integration-account-name> Your integration account's name Integration Account SAS URL Yes <integration-account-SAS-URL> Your integration account's Shared Access Signature (SAS) URL, which you can generate from your integration account's settings in the Azure portal.
1. On your integration account menu, under Settings, select Callback URL.
2. In the right-hand pane, copy the Generated Callback URL value.
Server Yes <TN3270-server-name> The server name for your TN3270 service Port No <TN3270-server-port> The port used by your TN3270 server. If left blank, the connector uses
23as the default value.
Device Type No <IBM-terminal-model> The model name or number for the IBM terminal to emulate. If left blank, the connector uses default values. Code Page No <code-page-number> The code page number for the host. If left blank, the connector uses
37as the default value.
Logical Unit Name No <logical-unit-name> The specific logical unit name to request from the host Enable SSL? No On or off Turn on or turn off TLS encryption. Validate host ssl certificate? No On or off Turn on or turn off validation for the server's certificate.
Provide the necessary information for the action:
Property Required Value Description Hidx Name Yes <HIDX-file-name> Select the 3270 HIDX file that you want to use. Method Name Yes <method-name> Select the method in the HIDX file that you want to use. After you select a method, the Add new parameter list appears so you can select parameters to use with that method.
Select the HIDX file
Select the method
Select the parameters
When you're done, save and run your logic app.
After your logic app finishes running, the steps from the run appear. Successful steps show check marks, while unsuccessful steps show the letter "X".
To review the inputs and outputs for each step, expand that step.
To review the outputs, choose See raw outputs.
For more technical details about this connector, such as triggers, actions, and limits as described by the connector's Swagger file, see the connector's reference page.
- Learn about other Logic Apps connectors