Bmx280Base Class

Definition

Namespace:

Iot.Device.Bmxx80

Assembly:

Iot.Device.Bindings.dll

Package:

Iot.Device.Bindings v3.0.0

Represents the core functionality of the Bmx280 family.

[System.Device.Model.Interface("Represents the core functionality of the Bmx280 family.")]
public abstract class Bmx280Base : Iot.Device.Bmxx80.Bmxx80Base

[<System.Device.Model.Interface("Represents the core functionality of the Bmx280 family.")>]
type Bmx280Base = class
    inherit Bmxx80Base

Public MustInherit Class Bmx280Base
Inherits Bmxx80Base

Inheritance

Object

Bmxx80Base

Bmx280Base

Derived

Iot.Device.Bmxx80.Bme280

Iot.Device.Bmxx80.Bmp280

Attributes

InterfaceAttribute

Constructors

Bmx280Base(Byte, I2cDevice)

Initializes a new instance of the Bmx280Base class.

Fields

_communicationProtocol	Chosen communication protocol. (Inherited from Bmxx80Base)
_controlRegister	The control register of the sensor. (Inherited from Bmxx80Base)
_i2cDevice	I2C device used to communicate with the device. (Inherited from Bmxx80Base)
DefaultI2cAddress	Default I2C bus address.
s_osToMeasCycles	Converts oversampling to needed measurement cycles for that oversampling.
SecondaryI2cAddress	Secondary I2C bus address.
TemperatureFine	(Inherited from Bmxx80Base)

Properties

_tempCalibrationFactor	(Inherited from Bmxx80Base)
FilterMode	Gets or sets the IIR filter mode.
PressureSampling	Gets or sets the pressure sampling. (Inherited from Bmxx80Base)
StandbyTime	Gets or sets the standby time between two consecutive measurements.
TempCalibrationFactor	The temperature calibration factor. (Inherited from Bmxx80Base)
TemperatureFine	The variable TemperatureFine carries a fine resolution temperature value over to the pressure compensation formula and could be implemented as a global variable. (Inherited from Bmxx80Base)
TemperatureSampling	Gets or sets the temperature sampling. (Inherited from Bmxx80Base)

Methods

ByteToSampling(Byte)	Converts byte to Sampling. (Inherited from Bmxx80Base)
CompensateTemperature(Int32)	Compensates the temperature. (Inherited from Bmxx80Base)
Dispose()	Cleanup. (Inherited from Bmxx80Base)
Dispose(Boolean)	Releases the unmanaged resources used by the Bmxx80 and optionally releases the managed resources. (Inherited from Bmxx80Base)
GetMeasurementDuration()	Gets the required time in ms to perform a measurement with the current sampling modes.
Read16BitsFromRegister(Byte)	(Inherited from Bmxx80Base)
Read16BitsFromRegister(Byte, Bmxx80Base+Endianness)	Reads a 16 bit value over I2C. (Inherited from Bmxx80Base)
Read24BitsFromRegister(Byte)	(Inherited from Bmxx80Base)
Read24BitsFromRegister(Byte, Bmxx80Base+Endianness)	Reads a 24 bit value over I2C. (Inherited from Bmxx80Base)
Read8BitsFromRegister(Byte)	Reads an 8 bit value from a register. (Inherited from Bmxx80Base)
ReadPowerMode()	Read the Bmx280PowerMode state.
ReadPressureSampling()	(Inherited from Bmxx80Base)
ReadStatus()	Get the current status of the device.
ReadTemperatureSampling()	(Inherited from Bmxx80Base)
Reset()	When called, the device is reset using the complete power-on-reset procedure. The device will reset to the default configuration. (Inherited from Bmxx80Base)
SetDefaultConfiguration()	Sets the default configuration for the sensor.
SetPowerMode(Bmx280PowerMode)	Sets the power mode to the given mode
SetPressureSampling(Sampling)	(Inherited from Bmxx80Base)
SetTemperatureSampling(Sampling)	(Inherited from Bmxx80Base)
TryReadAltitude(Length)	Calculates the altitude in meters from the mean sea-level pressure.
TryReadAltitude(Pressure, Length)	Calculates the altitude in meters from the specified sea-level pressure(in hPa).
TryReadPressure(Pressure)	Reads the pressure. A return value indicates whether the reading succeeded.
TryReadPressureCore(Pressure, Boolean)	Performs a pressure reading.
TryReadTemperature(Temperature)	Reads the temperature. A return value indicates whether the reading succeeded.
TryReadTemperatureCore(Temperature)	Performs a temperature reading.