Add-VpnS2SInterface

Creates a site-to-site (S2S) interface with the specified parameters.

Syntax

Add-VpnS2SInterface
   [-Name] <String>
   [-Destination] <String[]>
   [-AdminStatus <Boolean>]
   [-AsJob]
   [-AuthenticationMethod <String>]
   [-Certificate <X509Certificate2>]
   [-CimSession <CimSession[]>]
   [-EapMethod <String>]
   [-EncryptionType <String>]
   [-IdleDisconnectSeconds <UInt32>]
   [-InternalIPv4 <Boolean>]
   [-InternalIPv6 <Boolean>]
   [-IPv4Subnet <String[]>]
   [-IPv6Subnet <String[]>]
   [-NetworkOutageTimeSeconds <UInt32>]
   [-NumberOfTries <UInt32>]
   [-PassThru]
   [-Password <String>]
   [-PromoteAlternate <Boolean>]
   [-Protocol <String>]
   [-ResponderAuthenticationMethod <String>]
   [-RetryIntervalSeconds <UInt32>]
   [-SADataSizeForRenegotiationKilobytes <UInt32>]
   [-SALifeTimeSeconds <UInt32>]
   [-SharedSecret <String>]
   [-ThrottleLimit <Int32>]
   [-UserName <String>]
   [-Confirm]
   [-WhatIf]
Add-VpnS2SInterface
   [-Name] <String>
   [-Destination] <String[]>
   [-AdminStatus <Boolean>]
   [-AsJob]
   [-AuthenticationMethod <String>]
   [-AuthenticationTransformConstants <AuthenticationTransformConstants>]
   [-Certificate <X509Certificate2>]
   [-CimSession <CimSession[]>]
   [-CipherTransformConstants <CipherTransformConstants>]
   [-DHGroup <DHGroup>]
   [-EapMethod <String>]
   [-EncryptionMethod <EncryptionMethod>]
   [-IdleDisconnectSeconds <UInt32>]
   [-IntegrityCheckMethod <IntegrityCheckMethod>]
   [-InternalIPv4 <Boolean>]
   [-InternalIPv6 <Boolean>]
   [-IPv4Subnet <String[]>]
   [-IPv6Subnet <String[]>]
   [-NetworkOutageTimeSeconds <UInt32>]
   [-NumberOfTries <UInt32>]
   [-PassThru]
   [-Password <String>]
   [-PfsGroup <PfsGroup>]
   [-PromoteAlternate <Boolean>]
   [-Protocol <String>]
   [-ResponderAuthenticationMethod <String>]
   [-RetryIntervalSeconds <UInt32>]
   [-SADataSizeForRenegotiationKilobytes <UInt32>]
   [-SALifeTimeSeconds <UInt32>]
   [-SharedSecret <String>]
   [-ThrottleLimit <Int32>]
   [-UserName <String>]
   [-CustomPolicy]
   [-Confirm]
   [-WhatIf]

Description

The Add-VpnS2SInterface cmdlet creates a site-to-site (S2S) interface with the specified parameters. Use the CustomPolicy parameter to customize IPsec settings. If the Protocol parameter is set to Automatic, then the only authentication method allowed is user name. If the AuthenticationMethod parameter is set to pre-shared key (PSK), then only one interface can be enabled per destination and the initiator and responder policies are governed by what is specified per interface. If the AuthenticationMethod parameter is set to user name or computer certificates (MachineCert), then only initiator policies are governed by what is specified per interface and responder policies are governed by what is specified on the server.

For incoming connections.

-- If the AuthenticationMethod parameter is set to PSK, the interface for which the destination IP matches the incoming IP is activated.

-- If the AuthenticationMethod parameter is set to user name, then the name of the interface that matches the user name is activated.

-- If the AuthenticationMethod parameter is set to certificates, then the name of the interface that matches the certificate subject name is activated.

Examples

EXAMPLE 1

PS C:\> Add-VpnS2SInterface -Nameedge1 -Destination 131.107.0.20 -Protocol IKEv2 -AuthenticationMethod PSKOnly -SharedSecret abc -IPv4Subnet 10.2.0.0/24:100 -IPv6Subnet 2001:db8:2::/48:100

This example creates a S2S VPN interface named edge1 to the destination server 131.107.0.20. The protocol is IKEv2 and the authentication method is PSK. The string abc is used as PSK. Traffic to 10.2.0.0/24 and 2001:db8:2::/48 is sent over this interface if there is no other interface on the server that has same routes with a metric less than 100 . In case the interface is in disconnected state the connection is triggered if there is no other interface on the server that has same routes with a metric less than 100.

EXAMPLE 2

PS C:\>Add-VpnS2SInterface -IPv4Subnet @("131.0.1.0/24:254", "121.0.0.0/16:124") -UserName "abc@contoso.com" -Destination "30.0.0.1" -IPv6Subnet @("3ffe::/32:24", "2ffe::/32:24") -AuthenticationMethod "EAP" -Name "TestVpnS2SInterface" -RetryInterval 120 -EncryptionType "RequireEncryption" -InternalIPv4 1 -InternalIPv6 1 -NumberofTries 20 -AdminStatus $true -IdleDisconnectSeconds 300 -PromoteAlternate $true -Password "1111_aaaa" -PassThru
Name                 Destination          AdminStatus  ConnectionState IPv4Subnet 
----                 -----------          -----------  --------------- ---------- 
TestVpnS2SInterface  {30.0.0.1}           True         Disconnected    {131.0.1.0/24:254, 121.0.0.0/16:124}

This example creates an interface that uses EAP authentication method and multiple subnets are routed on this interface including 131.0.1.0/24 and 121.0.0.0/16.

EXAMPLE 3

PS C:\>Add-VpnS2SInterface -CustomPolicy -UserName "abc@contoso.com" -EncryptionMethod "AES128" -Destination "30.0.0.1" -Password "1111_aaaa" -DhGroup "Group2" -PfsGroup "PFS2" -CipherTransformConstants "AES128" -Name "TestVpnS2SInterface" -IntegrityCheckMethod "SHA256" -AuthenticationTransformConstants "SHA256128" -Protocol "IKEv2"

This example creates a S2S VPN interface using custom encryption settings.

EXAMPLE 4

PS C:\>$cert1 = Get-ChildItem -Path cert:LocalMachine\My | Where-Object -FilterScript { $_.Subject -Like "*CN=edge1.contoso.com*" }



PS C:\>Add-VpnS2SInterface -Name e1 -Destination 1.1.1.1 -AuthenticationMethod MachineCertificates -Certificate $cert1 -ResponderAuthenticationMethod MachineCertificates -Protocol IKEv2

This example creates a S2S interface with authentication method of computer certificate and specifies the certificate for which the subject name is edge1.contoso.com.

Required Parameters

-CustomPolicy

Specifies the custom IKE IPsec policies.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-Destination

Specifies the destination end point of the S2S connection. Note: If the Certificate parameter is specified as PSK, then an IP address should be specified for this parameter as a fully qualified domain name (FQDN) will not work.

Type:String[]
Position:3
Default value:None
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-Name

Specifies the name of the connection.

Type:String
Position:2
Default value:None
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False

Optional Parameters

-AdminStatus

Specifies the administrator status of the cmdlet.

Type:Boolean
Position:Named
Default value:True
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-AsJob

ps_cimcommon_asjob

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-AuthenticationMethod

Specifies the authentication method to be used by the S2S connection.

If PSK is specified, then there can only be one active S2S VPN interface per destination IP address.

Type:String
Position:Named
Default value:EAP
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-AuthenticationTransformConstants

Specifies the authentication transform for the IPsec policy.

Type:AuthenticationTransformConstants
Position:Named
Default value:2
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-Certificate

Specifies the certificate to be used in default store. Applicable only if AuthenticationMethod parameter is set to MachineCert.

Type:X509Certificate2
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227967 or Get-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227966 cmdlet. The default is the current session on the local computer.

Type:CimSession[]
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-CipherTransformConstants

Specifies the cipher for the IPsec policy.

Type:CipherTransformConstants
Position:Named
Default value:1
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Position:Named
Default value:False
Accept pipeline input:False
Accept wildcard characters:False
-DHGroup

Specifies the DH group for the IPsec policy.

Type:DHGroup
Position:Named
Default value:2
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-EapMethod

Specifies the EAP method if IkeLocalAuthenticationMethod is EAP.

Type:String
Position:Named
Default value:MSCHAPv2
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-EncryptionMethod

Specifies the encryption method for the IKE policy.

Type:EncryptionMethod
Position:Named
Default value:4
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-EncryptionType

Specifies the type of encryption.

Type:String
Position:Named
Default value:RequireEncryption
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-IPv4Subnet

Specifies the IPv4 subnet that is routed on this connection with metrics.

Type:String[]
Position:Named
Default value:None
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-IPv6Subnet

Specifies the IPv6 subnet that is routed on this connection with metrics.

Type:String[]
Position:Named
Default value:None
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-IdleDisconnectSeconds

Specifies the time, in seconds, after which an idle connection is disconnected. Unless the idle time-out is Disabled, the entire connection is disconnected if the connection is idle for the specified interval.

Type:UInt32
Position:Named
Default value:300
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-IntegrityCheckMethod

Specifies the integrity method for the IPsec policy.

Type:IntegrityCheckMethod
Position:Named
Default value:2
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-InternalIPv4

Specifies that the IPv4 address should be negotiated.

Type:Boolean
Position:Named
Default value:True
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-InternalIPv6

Specifies that the IPv6 address should be negotiated.

Type:Boolean
Position:Named
Default value:True
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-NetworkOutageTimeSeconds

Specifies the maximum network outage time after which the connection is disconnected.

Type:UInt32
Position:Named
Default value:15
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-NumberOfTries

Specifies the number of connection attempts.

If this parameter is specified as zero (0), then the connection is not retried if the first attempt fails.

Type:UInt32
Position:Named
Default value:3
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-Password

Specifies the password for the user name to be used for dialing the connection. Applicable only if AuthenticationMethod parameter is set to EAP.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-PfsGroup

Specifies the PFS group specified in the IPsec policy.

Type:PfsGroup
Position:Named
Default value:3
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-PromoteAlternate

Specifies an IP address that if successfully connected becomes the primary IP address, and the current primary IP address is moved to the alternate list.

Type:Boolean
Position:Named
Default value:False
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-Protocol

Specifies the underlying protocol used for tunneling.

Type:String
Position:Named
Default value:None
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-ResponderAuthenticationMethod

Specifies the authentication method to be used by the S2S initiator to validate the S2S responder.

Type:String
Position:Named
Default value:None
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-RetryIntervalSeconds

Specifies the number of seconds between retries.

Type:UInt32
Position:Named
Default value:60
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-SADataSizeForRenegotiationKilobytes

Specifies the number of kilobytes that are allowed to transfer using a security association (SA). After that the SA will be renegotiated.

Type:UInt32
Position:Named
Default value:10000
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-SALifeTimeSeconds

Specifies the lifetime of a SA in seconds, after which the SA is no longer valid.

Type:UInt32
Position:Named
Default value:7200
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-SharedSecret

Specifies the text of the shared secret to be used in the connection. This parameter is only applicable only if the AuthenticationMethod parameter is set to PSK or the ResponderAuthenticationMethod parameter is set to PSK.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type:Int32
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-UserName

Specifies the user name to be used for the connection. Applicable only if AuthenticationMethod parameter is set to EAP.

Type:String
Position:Named
Default value:None
Accept pipeline input:True (ByPropertyName)
Accept wildcard characters:False
-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Position:Named
Default value:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

None

Outputs

Microsoft.Management.Infrastructure.CimInstance#VpnS2SInterface

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.