Checklist for installing update 1810 for Configuration Manager

Applies to: System Center Configuration Manager (Current Branch)

When you use the current branch of Configuration Manager, you can install the in-console update for version 1810 to update your hierarchy from a previous version.

To get the update for version 1810, you must use a service connection point at the top-level site of your hierarchy. This site system role can be in online or offline mode. After your hierarchy downloads the update package from Microsoft, find it in the console. In the Administration workspace, select the Updates and Servicing node.

  • When the update is listed as Available, the update is ready to install. Before installing version 1810, review the following information about installing update 1810 and the checklist for configurations to make before starting the update.

  • If the update displays as Downloading and doesn't change, review the hman.log and dmpdownloader.log for errors.

    • The dmpdownloader.log may indicate that the dmpdownloader process is waiting for an interval before checking for updates. To restart the download of the update's redistribution files, restart the SMS_Executive service on the site server.

    • Another common download issue occurs when proxy server settings prevent downloads from http://silverlight.dlservice.microsoft.com and http://download.microsoft.com.

For more information about installing updates, see In-console updates and servicing.

For more information about current branch versions, see Baseline and update versions.

About installing update 1810

Sites

You install update 1810 at the top-level site of your hierarchy. Start the installation from your central administration site or from your stand-alone primary site. After the update is installed at the top-level site, child sites have the following update behavior:

  • Child primary sites install the update automatically after the central administration site finishes the installation of the update. You can use service windows to control when a site installs the update. For more information, see Service windows for site servers.

  • Manually update each secondary site from within the Configuration Manager console after the primary parent site finishes the update installation. Automatic update of secondary site servers isn't supported.

Site system roles

When a site server installs the update, it automatically updates all of the site system roles. These roles are on the site server or installed on remote servers. Before installing the update, make sure that each site system server meets the current prerequisites for the new update version.

Configuration Manager consoles

The first time you use a Configuration Manager console after the update has finished, you're prompted to update that console. You can also run the Configuration Manager setup on the computer that hosts the console, and choose the option to update the console. Install the update to the console as soon as possible. For more information, see Install the Configuration Manager console.

Important

When you install an update at the central administration site, be aware of the following limitations and delays that exist until all child primary sites also complete the update installation:

  • Client upgrades do not start. This includes automatic updates of clients and pre-production clients. Additionally, you cannot promote pre-production clients to production until the last site completes the update installation. After the last site completes the update installation, client upgrades will begin based on your configuration choices.
  • New features you enable with the update are not available. This is to prevent the replication of data related to that feature from being sent to a site that has not yet installed support for that feature. After all primary sites install the update, the feature will be available for use.
  • Replication links between the central administration site and child primary sites display as not upgraded. This displays in the update pack installation status as a status of Completed with warning for Monitoring replication initialization. In the Monitoring node of the console, this displays as Link is being configured.

Checklist

All sites run a supported version of Configuration Manager

Each site server in the hierarchy must run the same version of Configuration Manager before you can start the installation of update 1810. To update to 1810, you must use version 1710, 1802, or 1806.

Review the status of your product licensing

You must have an active Software Assurance (SA) agreement or equivalent subscription rights to install this update. When you update the site, the Licensing page presents the option to confirm your Software Assurance expiration date.

This value is optional. You can specify as a convenient reminder of your license expiration date. This date is visible when you install future updates. You might have previously specified this value during setup or installation of an update. You can also specify this value in the Configuration Manager console. In the Administration workspace, expand Site Configuration, and select Sites. Click Hierarchy Settings in the ribbon, and switch to the Licensing tab.

For more information, see Licensing and branches.

Review Microsoft .NET versions

When a site installs this update, Configuration Manager automatically installs .NET Framework 4.5.2. When this prerequisite isn't already installed, the site installs it on each server that hosts one of the following site system roles:

  • Management point
  • Service connection point
  • Enrollment proxy point
  • Enrollment point

This installation can put the site system server into a reboot pending state and report errors to the Configuration Manager component status viewer. Additionally, .NET applications on the server might experience random failures until the server is restarted.

For more information, see Site and site system prerequisites.

Review the version of the Windows ADK for Windows 10

The version of the Windows 10 Assessment and Deployment Kit (ADK) should be supported for Configuration Manager version 1810. For more information on supported Windows ADK versions, see Windows 10 ADK. If you need to update the Windows ADK, do so before you begin the update of Configuration Manager. This order makes sure the default boot images are automatically updated to the latest version of Windows PE. Manually update any custom boot images after updating the site.

If you update the site before you update the Windows ADK, see Update distribution points with the boot image.

Review the site and hierarchy status for unresolved issues

A site update can fail due to existing operational problems. Before you update a site, resolve all operational issues for the following systems:

  • The site server
  • The site database server
  • Remote site system roles on other servers

For more information, see Use alerts and the status system.

Review file and data replication between sites

Make sure that file and database replication between sites is operational and current. Delays or backlogs in either can prevent a smooth, successful update. For database replication, you can use the Replication Link Analyzer to help resolve issues prior to starting the update.

For more information, see About the Replication Link Analyzer.

Install all applicable critical Windows updates

Before you install an update for Configuration Manager, install any critical OS updates for each applicable site system. These servers include the site server, site database server, and remote site system roles. If an update that you install requires a restart, restart the applicable servers before you start the upgrade.

Disable database replicas for management points at primary sites

Configuration Manager can't successfully update a primary site that has a database replica for management points enabled. Before you install an update for Configuration Manager, disable database replication.

For more information, see Database replicas for management points.

Set SQL Server AlwaysOn availability groups to manual failover

If you use an availability group, make sure that the availability group is set to manual failover before you start the update installation. After the site has updated, you can restore failover to be automatic. For more information, see SQL Server AlwaysOn for a site database.

Disable site maintenance tasks at each site

Before you install the update, disable any site maintenance task that might run during the time the update process is active. For example, but not limited to:

  • Backup Site Server
  • Delete Aged Client Operations
  • Delete Aged Discovery Data

When a site database maintenance task runs during the update installation, the update installation can fail. Before you disable a task, record the schedule of the task so you can restore its configuration after the update has been installed.

For more information, see Maintenance tasks and Reference for maintenance tasks.

Temporarily stop any antivirus software

Before you update a site, stop antivirus software on the Configuration Manager servers.

Create a backup of the site database

Before you update a site, back up the site database at the central administration site and primary sites. This backup makes sure you have a successful backup to use for disaster recovery.

For more information, see Backup and recovery.

Plan for client piloting

When you install an update that updates the client, you can test that new client update in pre-production before it deploys and upgrades all your active clients. To take advantage of this option, you must configure your site to support automatic upgrades for pre-production before beginning installation of the update.

For more information, see Upgrade clients and How to test client upgrades in a pre-production collection.

Plan to use service windows

To define a period during which updates to a site server can be installed, use service windows. They can help you control when sites in your hierarchy install the update. For more information, see Service windows for site servers.

Review supported extensions

If you extend Configuration Manager with other products from Microsoft or Microsoft partners, confirm that those products support version 1810. Check with the product vendor for this information. For example, see the Microsoft Deployment Toolkit release notes.

Run the setup prerequisite checker

When the update is listed in the console as Available, you can independently run the prerequisite checker before installing the update. (When you install the update on the site, prerequisite checker runs again.)

To run a prerequisite check from the console, go to the Administration workspace, and select Updates and Servicing. Select the Configuration Manager 1810 update package, and click Run prerequisite check in the ribbon.

For more information, see the section to Run the prerequisite checker before installing an update in Before you install an in-console update.

Important

When the prerequisite checker runs, the process updates some product source files that are used for site maintenance tasks. Therefore, after running the prerequisite checker but before installing the update, if you need to perform a site maintenance task, run Setupwpf.exe (Configuration Manager Setup) from the CD.Latest folder on the site server.

Update sites

You're now ready to start the update installation for your hierarchy. For more information about installing the update, see Install in-console updates.

You may plan to install the update outside of normal business hours. Determine when the process will have the least effect on your business operations. Installing the update and its actions reinstall site components and site system roles.

For more information, see Updates for Configuration Manager.

Post-update checklist

After the site updates, use the following checklist to complete common tasks and configurations.

Confirm version and restart (if necessary)

Make sure each site server and site system role has updated to version 1810. In the console, add the Version column to the Sites and Distribution Points nodes in the Administration workspace. When necessary, a site system role automatically reinstalls to update to the new version.

Consider restarting remote site systems that don't successfully update at first. Review your site infrastructure and make sure that applicable site servers and remote site system servers have restarted successfully. Typically, site servers restart only when Configuration Manager installs .NET as a prerequisite for a site system role.

Confirm site-to-site replication is active

In the Configuration Manager console, go to the following locations to view the status, and make sure that replication is active:

  • Monitoring workspace, Site Hierarchy node

  • Monitoring workspace, Database Replication node

For more information, see the following articles:

Update Configuration Manager consoles

Update all remote Configuration Manager consoles to the same version. You're prompted to update the console when:

  • You open the console.

  • You go to a new node in the console.

Reconfigure database replicas for management points

After you update a primary site, reconfigure the database replica for management points that you uninstalled before you updated the site. For more information, see Database replicas for management points.

Reconfigure any disabled maintenance tasks

If you disabled database maintenance tasks at a site before installing the update, reconfigure those tasks. Use the same settings that were in place before the update.

Update clients

Update clients per the plan you created, especially if you configured client piloting before installing the update. For more information, see How to upgrade clients for Windows computers.

Third-party extensions

If you use any extensions to Configuration Manager, update them to the latest version to support Configuration Manager version 1810.

Update custom boot images and media

Use the Update Distribution Points action for any boot image that you use, whether it's a default or custom boot image. This action makes sure that clients can use the latest version. Even if there isn't a new version of the Windows ADK, the Configuration Manager client components may change with an update. If you don't update boot images and media, task sequence deployments may fail on devices.

When you update the site, Configuration Manager automatically updates the default boot images. It doesn't automatically distribute the updated content to distribution points. Use the Update Distribution Points action on specific boot images when you're ready to distribute this content across your network.

After updating the site, manually update any custom boot images. This action updates the boot image with the latest client components if necessary, optionally reloads it with the current Windows PE version, and redistributes the content to the distribution points.

For more information, see Update distribution points with the boot image.