Array.GetValue Array.GetValue Array.GetValue Array.GetValue Method

Definición

Obtiene el valor del elemento especificado de la Array actual.Gets the value of the specified element in the current Array.

Sobrecargas

GetValue(Int64, Int64, Int64) GetValue(Int64, Int64, Int64) GetValue(Int64, Int64, Int64) GetValue(Int64, Int64, Int64)

Obtiene el valor de la posición especificada de la matriz Array tridimensional.Gets the value at the specified position in the three-dimensional Array. Los índices se especifican como enteros de 64 bits.The indexes are specified as 64-bit integers.

GetValue(Int32, Int32, Int32) GetValue(Int32, Int32, Int32) GetValue(Int32, Int32, Int32) GetValue(Int32, Int32, Int32)

Obtiene el valor de la posición especificada de la matriz Array tridimensional.Gets the value at the specified position in the three-dimensional Array. Los índices se especifican como enteros de 32 bits.The indexes are specified as 32-bit integers.

GetValue(Int64, Int64) GetValue(Int64, Int64) GetValue(Int64, Int64) GetValue(Int64, Int64)

Obtiene el valor de la posición especificada de la matriz bidimensional Array.Gets the value at the specified position in the two-dimensional Array. Los índices se especifican como enteros de 64 bits.The indexes are specified as 64-bit integers.

GetValue(Int32, Int32) GetValue(Int32, Int32) GetValue(Int32, Int32) GetValue(Int32, Int32)

Obtiene el valor de la posición especificada de la matriz bidimensional Array.Gets the value at the specified position in the two-dimensional Array. Los índices se especifican como enteros de 32 bits.The indexes are specified as 32-bit integers.

GetValue(Int32) GetValue(Int32) GetValue(Int32) GetValue(Int32)

Obtiene el valor de la posición especificada de la matriz Array unidimensional.Gets the value at the specified position in the one-dimensional Array. El índice se especifica como un entero de 32 bits.The index is specified as a 32-bit integer.

GetValue(Int64) GetValue(Int64) GetValue(Int64) GetValue(Int64)

Obtiene el valor de la posición especificada de la matriz Array unidimensional.Gets the value at the specified position in the one-dimensional Array. El índice se especifica como un entero de 64 bits.The index is specified as a 64-bit integer.

GetValue(Int32[]) GetValue(Int32[]) GetValue(Int32[]) GetValue(Int32[])

Obtiene el valor de la posición especificada de Array multidimensional.Gets the value at the specified position in the multidimensional Array. Los índices se especifican en forma de una matriz de enteros de 32 bits.The indexes are specified as an array of 32-bit integers.

GetValue(Int64[]) GetValue(Int64[]) GetValue(Int64[]) GetValue(Int64[])

Obtiene el valor de la posición especificada de Array multidimensional.Gets the value at the specified position in the multidimensional Array. Los índices se especifican como matriz de enteros de 64 bits.The indexes are specified as an array of 64-bit integers.

GetValue(Int64, Int64, Int64) GetValue(Int64, Int64, Int64) GetValue(Int64, Int64, Int64) GetValue(Int64, Int64, Int64)

Obtiene el valor de la posición especificada de la matriz Array tridimensional.Gets the value at the specified position in the three-dimensional Array. Los índices se especifican como enteros de 64 bits.The indexes are specified as 64-bit integers.

public:
 System::Object ^ GetValue(long index1, long index2, long index3);
[System.Runtime.InteropServices.ComVisible(false)]
public object GetValue (long index1, long index2, long index3);
member this.GetValue : int64 * int64 * int64 -> obj
Public Function GetValue (index1 As Long, index2 As Long, index3 As Long) As Object

Parámetros

index1
Int64 Int64 Int64 Int64

Entero de 64 bits que representa el índice de la primera dimensión del elemento Array que se va a obtener.A 64-bit integer that represents the first-dimension index of the Array element to get.

index2
Int64 Int64 Int64 Int64

Entero de 64 bits que representa el índice de la segunda dimensión del elemento Array que se va a obtener.A 64-bit integer that represents the second-dimension index of the Array element to get.

index3
Int64 Int64 Int64 Int64

Entero de 64 bits que representa el índice de la tercera dimensión del elemento Array que se va a obtener.A 64-bit integer that represents the third-dimension index of the Array element to get.

Devoluciones

Valor de la posición especificada de la Array tridimensional.The value at the specified position in the three-dimensional Array.

Excepciones

El Array actual no tiene exactamente tres dimensiones.The current Array does not have exactly three dimensions.

index1, index2 o index3 está fuera del intervalo de índices válidos para la dimensión correspondiente del Array actual.index1 or index2 or index3 is outside the range of valid indexes for the corresponding dimension of the current Array.

Ejemplos

El ejemplo de código siguiente muestra cómo establecer y obtener un valor específico en una matriz unidimensional o multidimensional.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Imports System

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub 'Main 

End Class 'SamplesArray


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Comentarios

El GetLowerBound y GetUpperBound métodos pueden determinar si alguno de los índices queda fuera de los límites.The GetLowerBound and GetUpperBound methods can determine whether any of the indexes is out of bounds.

Este método es una operación o (1).This method is an O(1) operation.

Consulte también:

GetValue(Int32, Int32, Int32) GetValue(Int32, Int32, Int32) GetValue(Int32, Int32, Int32) GetValue(Int32, Int32, Int32)

Obtiene el valor de la posición especificada de la matriz Array tridimensional.Gets the value at the specified position in the three-dimensional Array. Los índices se especifican como enteros de 32 bits.The indexes are specified as 32-bit integers.

public:
 System::Object ^ GetValue(int index1, int index2, int index3);
public object GetValue (int index1, int index2, int index3);
member this.GetValue : int * int * int -> obj
Public Function GetValue (index1 As Integer, index2 As Integer, index3 As Integer) As Object

Parámetros

index1
Int32 Int32 Int32 Int32

Entero de 32 bits que representa el índice de la primera dimensión del elemento Array que se va a obtener.A 32-bit integer that represents the first-dimension index of the Array element to get.

index2
Int32 Int32 Int32 Int32

Entero de 32 bits que representa el índice de la segunda dimensión del elemento Array que se va a obtener.A 32-bit integer that represents the second-dimension index of the Array element to get.

index3
Int32 Int32 Int32 Int32

Entero de 32 bits que representa el índice de la tercera dimensión del elemento Array que se va a obtener.A 32-bit integer that represents the third-dimension index of the Array element to get.

Devoluciones

Valor de la posición especificada de la Array tridimensional.The value at the specified position in the three-dimensional Array.

Excepciones

El Array actual no tiene exactamente tres dimensiones.The current Array does not have exactly three dimensions.

index1, index2 o index3 está fuera del intervalo de índices válidos para la dimensión correspondiente del Array actual.index1 or index2 or index3 is outside the range of valid indexes for the corresponding dimension of the current Array.

Ejemplos

El ejemplo de código siguiente muestra cómo establecer y obtener un valor específico en una matriz unidimensional o multidimensional.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Imports System

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub 'Main 

End Class 'SamplesArray


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Comentarios

El GetLowerBound y GetUpperBound métodos pueden determinar si alguno de los índices queda fuera de los límites.The GetLowerBound and GetUpperBound methods can determine whether any of the indexes is out of bounds.

Este método es una operación o (1).This method is an O(1) operation.

Consulte también:

GetValue(Int64, Int64) GetValue(Int64, Int64) GetValue(Int64, Int64) GetValue(Int64, Int64)

Obtiene el valor de la posición especificada de la matriz bidimensional Array.Gets the value at the specified position in the two-dimensional Array. Los índices se especifican como enteros de 64 bits.The indexes are specified as 64-bit integers.

public:
 System::Object ^ GetValue(long index1, long index2);
[System.Runtime.InteropServices.ComVisible(false)]
public object GetValue (long index1, long index2);
member this.GetValue : int64 * int64 -> obj
Public Function GetValue (index1 As Long, index2 As Long) As Object

Parámetros

index1
Int64 Int64 Int64 Int64

Entero de 64 bits que representa el índice de la primera dimensión del elemento Array que se va a obtener.A 64-bit integer that represents the first-dimension index of the Array element to get.

index2
Int64 Int64 Int64 Int64

Entero de 64 bits que representa el índice de la segunda dimensión del elemento Array que se va a obtener.A 64-bit integer that represents the second-dimension index of the Array element to get.

Devoluciones

Valor de la posición especificada de la Array bidimensional.The value at the specified position in the two-dimensional Array.

Excepciones

El Array actual no tiene exactamente dos dimensiones.The current Array does not have exactly two dimensions.

index1 o index2 está fuera del intervalo de índices válidos para la dimensión correspondiente del Array actual.Either index1 or index2 is outside the range of valid indexes for the corresponding dimension of the current Array.

Ejemplos

El ejemplo de código siguiente muestra cómo establecer y obtener un valor específico en una matriz unidimensional o multidimensional.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Imports System

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub 'Main 

End Class 'SamplesArray


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Comentarios

El GetLowerBound y GetUpperBound métodos pueden determinar si alguno de los índices queda fuera de los límites.The GetLowerBound and GetUpperBound methods can determine whether any of the indexes is out of bounds.

Este método es una operación o (1).This method is an O(1) operation.

Consulte también:

GetValue(Int32, Int32) GetValue(Int32, Int32) GetValue(Int32, Int32) GetValue(Int32, Int32)

Obtiene el valor de la posición especificada de la matriz bidimensional Array.Gets the value at the specified position in the two-dimensional Array. Los índices se especifican como enteros de 32 bits.The indexes are specified as 32-bit integers.

public:
 System::Object ^ GetValue(int index1, int index2);
public object GetValue (int index1, int index2);
member this.GetValue : int * int -> obj
Public Function GetValue (index1 As Integer, index2 As Integer) As Object

Parámetros

index1
Int32 Int32 Int32 Int32

Entero de 32 bits que representa el índice de la primera dimensión del elemento Array que se va a obtener.A 32-bit integer that represents the first-dimension index of the Array element to get.

index2
Int32 Int32 Int32 Int32

Entero de 32 bits que representa el índice de la segunda dimensión del elemento Array que se va a obtener.A 32-bit integer that represents the second-dimension index of the Array element to get.

Devoluciones

Valor de la posición especificada de la Array bidimensional.The value at the specified position in the two-dimensional Array.

Excepciones

El Array actual no tiene exactamente dos dimensiones.The current Array does not have exactly two dimensions.

index1 o index2 está fuera del intervalo de índices válidos para la dimensión correspondiente del Array actual.Either index1 or index2 is outside the range of valid indexes for the corresponding dimension of the current Array.

Ejemplos

El ejemplo de código siguiente muestra cómo establecer y obtener un valor específico en una matriz unidimensional o multidimensional.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Imports System

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub 'Main 

End Class 'SamplesArray


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Comentarios

El GetLowerBound y GetUpperBound métodos pueden determinar si alguno de los índices queda fuera de los límites.The GetLowerBound and GetUpperBound methods can determine whether any of the indexes is out of bounds.

Este método es una operación o (1).This method is an O(1) operation.

Consulte también:

GetValue(Int32) GetValue(Int32) GetValue(Int32) GetValue(Int32)

Obtiene el valor de la posición especificada de la matriz Array unidimensional.Gets the value at the specified position in the one-dimensional Array. El índice se especifica como un entero de 32 bits.The index is specified as a 32-bit integer.

public:
 System::Object ^ GetValue(int index);
public object GetValue (int index);
member this.GetValue : int -> obj
Public Function GetValue (index As Integer) As Object

Parámetros

index
Int32 Int32 Int32 Int32

Entero de 32 bits que representa la posición del elemento Array que se va a obtener.A 32-bit integer that represents the position of the Array element to get.

Devoluciones

Valor de la posición especificada de la matriz Array unidimensional.The value at the specified position in the one-dimensional Array.

Excepciones

El Array actual no tiene exactamente una dimensión.The current Array does not have exactly one dimension.

index está fuera del intervalo de índices válidos para el Array actual.index is outside the range of valid indexes for the current Array.

Ejemplos

El ejemplo de código siguiente muestra cómo establecer y obtener un valor específico en una matriz unidimensional o multidimensional.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Imports System

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub 'Main 

End Class 'SamplesArray


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Comentarios

El GetLowerBound y GetUpperBound métodos pueden determinar si el valor de index je MIMO rozsah.The GetLowerBound and GetUpperBound methods can determine whether the value of index is out of bounds.

Este método es una operación o (1).This method is an O(1) operation.

Consulte también:

GetValue(Int64) GetValue(Int64) GetValue(Int64) GetValue(Int64)

Obtiene el valor de la posición especificada de la matriz Array unidimensional.Gets the value at the specified position in the one-dimensional Array. El índice se especifica como un entero de 64 bits.The index is specified as a 64-bit integer.

public:
 System::Object ^ GetValue(long index);
[System.Runtime.InteropServices.ComVisible(false)]
public object GetValue (long index);
member this.GetValue : int64 -> obj
Public Function GetValue (index As Long) As Object

Parámetros

index
Int64 Int64 Int64 Int64

Entero de 64 bits que representa la posición del elemento Array que se va a obtener.A 64-bit integer that represents the position of the Array element to get.

Devoluciones

Valor de la posición especificada de la matriz Array unidimensional.The value at the specified position in the one-dimensional Array.

Excepciones

El Array actual no tiene exactamente una dimensión.The current Array does not have exactly one dimension.

index está fuera del intervalo de índices válidos para el Array actual.index is outside the range of valid indexes for the current Array.

Ejemplos

El ejemplo de código siguiente muestra cómo establecer y obtener un valor específico en una matriz unidimensional o multidimensional.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Imports System

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub 'Main 

End Class 'SamplesArray


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Comentarios

El GetLowerBound y GetUpperBound métodos pueden determinar si el valor de index je MIMO rozsah.The GetLowerBound and GetUpperBound methods can determine whether the value of index is out of bounds.

Este método es una operación o (1).This method is an O(1) operation.

Consulte también:

GetValue(Int32[]) GetValue(Int32[]) GetValue(Int32[]) GetValue(Int32[])

Obtiene el valor de la posición especificada de Array multidimensional.Gets the value at the specified position in the multidimensional Array. Los índices se especifican en forma de una matriz de enteros de 32 bits.The indexes are specified as an array of 32-bit integers.

public:
 System::Object ^ GetValue(... cli::array <int> ^ indices);
public object GetValue (params int[] indices);
member this.GetValue : int[] -> obj
Public Function GetValue (ParamArray indices As Integer()) As Object

Parámetros

indices
Int32[]

Matriz unidimensional de enteros de 32 bits que representan los índices que especifican la posición del elemento Array que se debe obtener.A one-dimensional array of 32-bit integers that represent the indexes specifying the position of the Array element to get.

Devoluciones

Valor de la posición especificada en la Array multidimensional.The value at the specified position in the multidimensional Array.

Excepciones

El número de dimensiones de la Array actual no es igual al número de elementos de indices.The number of dimensions in the current Array is not equal to the number of elements in indices.

Cualquier elemento de indices está fuera del intervalo de índices válidos para la dimensión correspondiente de la Array actual.Any element in indices is outside the range of valid indexes for the corresponding dimension of the current Array.

Ejemplos

El ejemplo de código siguiente muestra cómo establecer y obtener un valor específico en una matriz unidimensional o multidimensional.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Imports System

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub 'Main 

End Class 'SamplesArray


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Comentarios

El número de elementos de indices debe ser igual al número de dimensiones en el Array.The number of elements in indices must equal the number of dimensions in the Array. Todos los elementos de la indices matriz colectivamente debe especificar la posición del elemento deseado en multidimensional Array.All elements in the indices array must collectively specify the position of the desired element in the multidimensional Array.

El GetLowerBound y GetUpperBound métodos pueden determinar si alguno de los índices queda fuera de los límites.The GetLowerBound and GetUpperBound methods can determine whether any of the indexes is out of bounds.

Este método es una operación o (1).This method is an O(1) operation.

Consulte también:

GetValue(Int64[]) GetValue(Int64[]) GetValue(Int64[]) GetValue(Int64[])

Obtiene el valor de la posición especificada de Array multidimensional.Gets the value at the specified position in the multidimensional Array. Los índices se especifican como matriz de enteros de 64 bits.The indexes are specified as an array of 64-bit integers.

public:
 System::Object ^ GetValue(... cli::array <long> ^ indices);
[System.Runtime.InteropServices.ComVisible(false)]
public object GetValue (params long[] indices);
member this.GetValue : int64[] -> obj
Public Function GetValue (ParamArray indices As Long()) As Object

Parámetros

indices
Int64[]

Matriz unidimensional de enteros de 64 bits que representan los índices que especifican la posición del elemento Array que se va a obtener.A one-dimensional array of 64-bit integers that represent the indexes specifying the position of the Array element to get.

Devoluciones

Valor de la posición especificada en la Array multidimensional.The value at the specified position in the multidimensional Array.

Excepciones

El número de dimensiones de la Array actual no es igual al número de elementos de indices.The number of dimensions in the current Array is not equal to the number of elements in indices.

Cualquier elemento de indices está fuera del intervalo de índices válidos para la dimensión correspondiente de la Array actual.Any element in indices is outside the range of valid indexes for the corresponding dimension of the current Array.

Ejemplos

El ejemplo de código siguiente muestra cómo establecer y obtener un valor específico en una matriz unidimensional o multidimensional.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Imports System

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub 'Main 

End Class 'SamplesArray


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Comentarios

El número de elementos de indices debe ser igual al número de dimensiones en el Array.The number of elements in indices must equal the number of dimensions in the Array. Todos los elementos de la indices matriz colectivamente debe especificar la posición del elemento deseado en multidimensional Array.All elements in the indices array must collectively specify the position of the desired element in the multidimensional Array.

El GetLowerBound y GetUpperBound métodos pueden determinar si alguno de los índices queda fuera de los límites.The GetLowerBound and GetUpperBound methods can determine whether any of the indexes is out of bounds.

Este método es una operación o (1).This method is an O(1) operation.

Consulte también:

Se aplica a