Region.Exclude Méthode
Définition
Important
Certaines informations portent sur la préversion du produit qui est susceptible d’être en grande partie modifiée avant sa publication. Microsoft exclut toute garantie, expresse ou implicite, concernant les informations fournies ici.
Surcharges
Exclude(Region) |
Met à jour cet objet Region pour contenir uniquement la partie de son intérieur qui ne croise pas le Region spécifié. |
Exclude(GraphicsPath) |
Met à jour cet objet Region pour contenir uniquement la partie de son intérieur qui ne croise pas le GraphicsPath spécifié. |
Exclude(Rectangle) |
Met à jour cet objet Region pour contenir uniquement la partie de son intérieur qui ne croise pas la structure Rectangle spécifiée. |
Exclude(RectangleF) |
Met à jour cet objet Region pour contenir uniquement la partie de son intérieur qui ne croise pas la structure RectangleF spécifiée. |
Exclude(Region)
- Source:
- Region.cs
- Source:
- Region.cs
- Source:
- Region.cs
public:
void Exclude(System::Drawing::Region ^ region);
public void Exclude (System.Drawing.Region region);
member this.Exclude : System.Drawing.Region -> unit
Public Sub Exclude (region As Region)
Paramètres
Exceptions
region
a la valeur null
.
Exemples
Pour obtenir des exemples de code, consultez les Exclude(RectangleF) méthodes et Complement(Region) .
S’applique à
Exclude(GraphicsPath)
- Source:
- Region.cs
- Source:
- Region.cs
- Source:
- Region.cs
Met à jour cet objet Region pour contenir uniquement la partie de son intérieur qui ne croise pas le GraphicsPath spécifié.
public:
void Exclude(System::Drawing::Drawing2D::GraphicsPath ^ path);
public void Exclude (System.Drawing.Drawing2D.GraphicsPath path);
member this.Exclude : System.Drawing.Drawing2D.GraphicsPath -> unit
Public Sub Exclude (path As GraphicsPath)
Paramètres
- path
- GraphicsPath
GraphicsPath à exclure de cet objet Region.
Exceptions
path
a la valeur null
.
Exemples
L’exemple de code suivant illustre le Region constructeur et les Exclude méthodes et Dispose .
Cet exemple est conçu pour être utilisé avec Windows Forms. Collez le code dans un formulaire et appelez la méthode lors de la FillRegionExcludingPath
gestion de l’événement du Paint formulaire, en passant e
comme PaintEventArgs.
private:
void FillRegionExcludingPath( PaintEventArgs^ e )
{
// Create the region using a rectangle.
System::Drawing::Region^ myRegion = gcnew System::Drawing::Region( Rectangle(20,20,100,100) );
// Create the GraphicsPath.
System::Drawing::Drawing2D::GraphicsPath^ path = gcnew System::Drawing::Drawing2D::GraphicsPath;
// Add a circle to the graphics path.
path->AddEllipse( 50, 50, 25, 25 );
// Exclude the circle from the region.
myRegion->Exclude( path );
// Retrieve a Graphics object from the form.
Graphics^ formGraphics = e->Graphics;
// Fill the region in blue.
formGraphics->FillRegion( Brushes::Blue, myRegion );
// Dispose of the path and region objects.
delete path;
delete myRegion;
}
private void FillRegionExcludingPath(PaintEventArgs e)
{
// Create the region using a rectangle.
Region myRegion = new Region(new Rectangle(20, 20, 100, 100));
// Create the GraphicsPath.
System.Drawing.Drawing2D.GraphicsPath path =
new System.Drawing.Drawing2D.GraphicsPath();
// Add a circle to the graphics path.
path.AddEllipse(50, 50, 25, 25);
// Exclude the circle from the region.
myRegion.Exclude(path);
// Retrieve a Graphics object from the form.
Graphics formGraphics = e.Graphics;
// Fill the region in blue.
formGraphics.FillRegion(Brushes.Blue, myRegion);
// Dispose of the path and region objects.
path.Dispose();
myRegion.Dispose();
}
Private Sub FillRegionExcludingPath(ByVal e As PaintEventArgs)
' Create the region using a rectangle.
Dim myRegion As New Region(New Rectangle(20, 20, 100, 100))
' Create the GraphicsPath.
Dim path As New System.Drawing.Drawing2D.GraphicsPath
' Add a circle to the graphics path.
path.AddEllipse(50, 50, 25, 25)
' Exclude the circle from the region.
myRegion.Exclude(path)
' Retrieve a Graphics object from the form.
Dim formGraphics As Graphics = e.Graphics
' Fill the region in blue.
formGraphics.FillRegion(Brushes.Blue, myRegion)
' Dispose of the path and region objects.
path.Dispose()
myRegion.Dispose()
End Sub
S’applique à
Exclude(Rectangle)
- Source:
- Region.cs
- Source:
- Region.cs
- Source:
- Region.cs
public:
void Exclude(System::Drawing::Rectangle rect);
public void Exclude (System.Drawing.Rectangle rect);
member this.Exclude : System.Drawing.Rectangle -> unit
Public Sub Exclude (rect As Rectangle)
Paramètres
Exemples
Pour obtenir un exemple de code, consultez la Exclude(RectangleF) méthode .
S’applique à
Exclude(RectangleF)
- Source:
- Region.cs
- Source:
- Region.cs
- Source:
- Region.cs
Met à jour cet objet Region pour contenir uniquement la partie de son intérieur qui ne croise pas la structure RectangleF spécifiée.
public:
void Exclude(System::Drawing::RectangleF rect);
public void Exclude (System.Drawing.RectangleF rect);
member this.Exclude : System.Drawing.RectangleF -> unit
Public Sub Exclude (rect As RectangleF)
Paramètres
- rect
- RectangleF
Structure RectangleF à exclure de cet objet Region.
Exemples
L’exemple suivant est conçu pour être utilisé avec Windows Forms et nécessite PaintEventArgse
, qui est un paramètre du Paint gestionnaire d’événements. Le code effectue les actions suivantes :
Crée un rectangle et le dessine à l’écran en noir
Crée un deuxième rectangle qui croise le premier et le dessine à l’écran en rouge.
Crée une région à l’aide du premier rectangle.
Obtient la zone nonexclée de la région lorsqu’elle est combinée avec le deuxième rectangle.
Remplit la zone nonexclée de bleu et la dessine à l’écran.
Notez que la zone de la zone de la région qui ne croise pas le rectangle est de couleur bleue.
public:
void Exclude_RectF_Example( PaintEventArgs^ e )
{
// Create the first rectangle and draw it to the screen in black.
Rectangle regionRect = Rectangle(20,20,100,100);
e->Graphics->DrawRectangle( Pens::Black, regionRect );
// Create the second rectangle and draw it to the screen in red.
RectangleF complementRect = RectangleF(90,30,100,100);
e->Graphics->DrawRectangle( Pens::Red, Rectangle::Round( complementRect ) );
// Create a region using the first rectangle.
System::Drawing::Region^ myRegion = gcnew System::Drawing::Region( regionRect );
// Get the nonexcluded area of myRegion when combined with
// complementRect.
myRegion->Exclude( complementRect );
// Fill the nonexcluded area of myRegion with blue.
SolidBrush^ myBrush = gcnew SolidBrush( Color::Blue );
e->Graphics->FillRegion( myBrush, myRegion );
}
public void Exclude_RectF_Example(PaintEventArgs e)
{
// Create the first rectangle and draw it to the screen in black.
Rectangle regionRect = new Rectangle(20, 20, 100, 100);
e.Graphics.DrawRectangle(Pens.Black, regionRect);
// Create the second rectangle and draw it to the screen in red.
RectangleF complementRect = new RectangleF(90, 30, 100, 100);
e.Graphics.DrawRectangle(Pens.Red,
Rectangle.Round(complementRect));
// Create a region using the first rectangle.
Region myRegion = new Region(regionRect);
// Get the nonexcluded area of myRegion when combined with
// complementRect.
myRegion.Exclude(complementRect);
// Fill the nonexcluded area of myRegion with blue.
SolidBrush myBrush = new SolidBrush(Color.Blue);
e.Graphics.FillRegion(myBrush, myRegion);
}
Public Sub Exclude_RectF_Example(ByVal e As PaintEventArgs)
' Create the first rectangle and draw it to the screen in black.
Dim regionRect As New Rectangle(20, 20, 100, 100)
e.Graphics.DrawRectangle(Pens.Black, regionRect)
' create the second rectangle and draw it to the screen in red.
Dim complementRect As New RectangleF(90, 30, 100, 100)
e.Graphics.DrawRectangle(Pens.Red, _
Rectangle.Round(complementRect))
' Create a region using the first rectangle.
Dim myRegion As New [Region](regionRect)
' Get the nonexcluded area of myRegion when combined with
' complementRect.
myRegion.Exclude(complementRect)
' Fill the nonexcluded area of myRegion with blue.
Dim myBrush As New SolidBrush(Color.Blue)
e.Graphics.FillRegion(myBrush, myRegion)
End Sub
S’applique à
Commentaires
https://aka.ms/ContentUserFeedback.
Bientôt disponible : Tout au long de 2024, nous allons supprimer progressivement GitHub Issues comme mécanisme de commentaires pour le contenu et le remplacer par un nouveau système de commentaires. Pour plus d’informations, consultezEnvoyer et afficher des commentaires pour