Partager via


MessageQuery.Evaluate Méthode

Définition

En cas de remplacement dans une classe dérivée, exécute une requête relative au message et retourne une valeur qui satisfait la requête.

Surcharges

Evaluate<TResult>(Message)

En cas de remplacement dans une classe dérivée, exécute une requête relative au message et retourne un résultat. Le corps ne peut pas être recherché.

Evaluate<TResult>(MessageBuffer)

En cas de remplacement dans une classe dérivée, exécute une requête relative au message et retourne un résultat.

Remarques

L'une des deux surcharges reçoit un paramètre Message et n'est pas en mesure d'analyser le corps du message, alors que l'autre surcharge reçoit un paramètre MessageBuffer et peut analyser n'importe quelle partie du message. Les en-têtes de messages sont automatiquement mis en mémoire tampon et peuvent être recherchés par un filtre sans être trouvés. Toutefois, si le corps doit faire l'objet d'une requête, alors, le message entier doit être mis en mémoire tampon parce que le corps du message non tamponné peut être trouvé par la requête.

Evaluate<TResult>(Message)

En cas de remplacement dans une classe dérivée, exécute une requête relative au message et retourne un résultat. Le corps ne peut pas être recherché.

public:
generic <typename TResult>
 abstract TResult Evaluate(System::ServiceModel::Channels::Message ^ message);
public abstract TResult Evaluate<TResult> (System.ServiceModel.Channels.Message message);
abstract member Evaluate : System.ServiceModel.Channels.Message -> 'Result
Public MustOverride Function Evaluate(Of TResult) (message As Message) As TResult

Paramètres de type

TResult

Type de la valeur de retour.

Paramètres

message
Message

Message à soumettre à la requête.

Retours

TResult

MessageQueryCollection

Collection pouvant être énumérée des résultats qui satisfont la requête.

S’applique à

Evaluate<TResult>(MessageBuffer)

En cas de remplacement dans une classe dérivée, exécute une requête relative au message et retourne un résultat.

public:
generic <typename TResult>
 abstract TResult Evaluate(System::ServiceModel::Channels::MessageBuffer ^ buffer);
public abstract TResult Evaluate<TResult> (System.ServiceModel.Channels.MessageBuffer buffer);
abstract member Evaluate : System.ServiceModel.Channels.MessageBuffer -> 'Result
Public MustOverride Function Evaluate(Of TResult) (buffer As MessageBuffer) As TResult

Paramètres de type

TResult

Type de l'objet à retourner.

Paramètres

buffer
MessageBuffer

Message à soumettre à la requête.

Retours

TResult

MessageQueryCollection

Collection pouvant être énumérée des résultats qui satisfont la requête.

Exemples

L'exemple suivant crée un message et des requêtes de message XPath. Les requêtes sont évaluées par les objets XPathMessageQuery contenus dans un objet XPathMessageQueryCollection. Les résultats de chaque requête sont testés à l'aide de la propriété ResultType de la classe XPathResult.

using System;
using System.IO;
using System.Xml;
using System.ServiceModel.Dispatcher;
using System.ServiceModel;
using System.ServiceModel.Channels;
using System.Xml.XPath;

namespace MessageQueryExamples
{

    class Program
    {
        static void Main(string[] args)
        {
            // The XPathMessageQueryCollection inherits from MessageQueryCollection.
            XPathMessageQueryCollection queryCollection = MessageHelper.SetupQueryCollection();

            // Create a message and a copy of the message. You must create a buffered copy to access the message body.
            Message mess = MessageHelper.CreateMessage();
            MessageBuffer mb = mess.CreateBufferedCopy(int.MaxValue);

            // Evaluate every query in the collection.
            foreach (XPathMessageQuery q in queryCollection)
            {
                // Evaluate the query. Note the result type is an XPathResult.
                XPathResult qPathResult = q.Evaluate<XPathResult>(mb);

                // Use the XPathResult to determine the result type.
                Console.WriteLine("Result type: {0}", qPathResult.ResultType);

                // The following code prints the result according to the result type.

                if (qPathResult.ResultType == XPathResultType.String)
                    Console.WriteLine("{0} = {1}", q.Expression, qPathResult.GetResultAsString());

                if (qPathResult.ResultType == XPathResultType.NodeSet)
                {
                    // Iterate through the node set.
                    XPathNodeIterator ns = qPathResult.GetResultAsNodeset();
                    foreach (XPathNavigator n in ns)
                        Console.WriteLine("\t{0} = {1}", q.Expression, n.Value);
                }
                if (qPathResult.ResultType == XPathResultType.Number)
                    Console.WriteLine("\t{0} = {1}", q.Expression, qPathResult.GetResultAsNumber());

                if (qPathResult.ResultType == XPathResultType.Boolean)
                    Console.WriteLine("\t{0} ={1}", q.Expression, qPathResult.GetResultAsBoolean());

                if (qPathResult.ResultType == XPathResultType.Error)
                    Console.WriteLine("\tError!");
            }

            Console.WriteLine();

            // The alternate code below demonstrates similar funcionality using a MessageQueryTable.
            // The difference is the KeyValuePair that requires a key to index each value.
            // The code uses the expression as the key, and an arbitrary value for the value.

            //MessageQueryTable<string> mq = MessageHelper.SetupTable();
            //foreach (KeyValuePair<MessageQuery, string> kv in mq)
            //{
            //    XPathMessageQuery xp = (XPathMessageQuery)kv.Key;
            //    Console.WriteLine("Value = {0}", kv.Value);
            //    Console.WriteLine("{0} = {1}", xp.Expression, xp.Evaluate<string>(mb));
            //}

            Console.ReadLine();
        }
    }

    public class MessageHelper
    {
        static string messageBody =
              "<PurchaseOrder date='today'>" +
                  "<Number>ABC-2009-XYZ</Number>" +
                  "<Department>OnlineSales</Department>" +
                  "<Items>" +
                      "<Item product='nail' quantity='1'>item1</Item>" +
                      "<Item product='screw' quantity='2'>item2</Item>" +
                      "<Item product='brad' quantity='3'>" +
                          "<SpecialOffer/>" +
                          "Special item4" +
                      "</Item>" +
                      "<Item product='SpecialNails' quantity='9'>item5</Item>" +
                      "<Item product='SpecialBrads' quantity='11'>" +
                          "<SpecialOffer/>" +
                          "Special item6" +
                      "</Item>" +
                      "<Item product='hammer' quantity='1'>item7</Item>" +
                      "<Item product='wrench' quantity='2'>item8</Item>" +
                  "</Items>" +
                "<Comments>" +
                "Rush order" +
                "</Comments>" +
              "</PurchaseOrder>";

        public static string xpath = "/s12:Envelope/s12:Body/PurchaseOrder/Items/Item[@quantity = 1]";
        public static string xpath2 = "/s12:Envelope/s12:Body/PurchaseOrder/Items/Item[@product = 'nail']";
        public static string xpath3 = "/s12:Envelope/s12:Body/PurchaseOrder/Comments";
        public static string xpath4 = "count(/s12:Envelope/s12:Body/PurchaseOrder/Items/Item)";
        public static string xpath5 = "substring(string(/s12:Envelope/s12:Body/PurchaseOrder/Number),5,4)";
        public static string xpath6 = "/s12:Envelope/s12:Body/PurchaseOrder/Department='OnlineSales'";
        public static string xpath7 = "//PurchaseOrder/@date";
        public static string xpath8 = "//SpecialOffer/ancestor::Item[@product = 'brad']";

        // Invoke the correlation data function.
        public static string xpath9 = "sm:correlation-data('CorrelationData1')";
        public static string xpath10 = "sm:correlation-data('CorrelationData2')";

        public static string xpath11 = "/s12:Envelope/s12:Body/PurchaseOrder/Items/Item[@quantity = 2]";

        public static Message CreateMessage()
        {
            StringReader stringReader = new StringReader(messageBody);
            XmlTextReader xmlReader = new XmlTextReader(stringReader);
            Message message = Message.CreateMessage(MessageVersion.Soap12WSAddressing10, "http://purchaseorder", xmlReader);

            // Add two correlation properties using lambda expressions. The property names are
            // CorrelationData1 and CorrelationData2. The first goes to "value1" and the
            // second to "value2". You can use your own property names and values.
            CorrelationDataMessageProperty data = new CorrelationDataMessageProperty();

            data.Add("CorrelationData1", () => "value1");
            data.Add("CorrelationData2", () => "value2");
            message.Properties[CorrelationDataMessageProperty.Name] = data;

            return message;
        }

        public static XPathMessageQueryCollection SetupQueryCollection()
        {
            // Create the query collection and add the XPath queries to it. To create
            // the query, you must also use a new XPathMessageContext.

            XPathMessageQueryCollection queryCollection = new XPathMessageQueryCollection();

            XPathMessageContext context = new XPathMessageContext();
            queryCollection.Add(new XPathMessageQuery(xpath, context));
            queryCollection.Add(new XPathMessageQuery(xpath2, context));
            queryCollection.Add(new XPathMessageQuery(xpath3, context));
            queryCollection.Add(new XPathMessageQuery(xpath4, context));
            queryCollection.Add(new XPathMessageQuery(xpath5, context));
            queryCollection.Add(new XPathMessageQuery(xpath6, context));
            queryCollection.Add(new XPathMessageQuery(xpath7, context));
            queryCollection.Add(new XPathMessageQuery(xpath8, context));
            queryCollection.Add(new XPathMessageQuery(xpath9, context));
            queryCollection.Add(new XPathMessageQuery(xpath10, context));
            queryCollection.Add(new XPathMessageQuery(xpath11, context));

            return queryCollection;
        }

        public static MessageQueryTable<string> SetupTable()
        {
            // This is optional code to demonstrate using a MessageQueryTable.
            // Compare this to the MessageQueryCollection.
            MessageQueryTable<string> table = new MessageQueryTable<string>();
            XPathMessageContext context = new XPathMessageContext();

            // The code adds a KeyValuePair to the table. Each pair requires
            // a query used as the Key, and a value that is paired to the key.
            table.Add(new XPathMessageQuery(xpath, context), "value10");
            table.Add(new XPathMessageQuery(xpath2, context), "value20");
            table.Add(new XPathMessageQuery(xpath3, context), "value30");
            table.Add(new XPathMessageQuery(xpath4, context), "value40");
            table.Add(new XPathMessageQuery(xpath5, context), "value50");
            table.Add(new XPathMessageQuery(xpath6, context), "value60");
            table.Add(new XPathMessageQuery(xpath7, context), "value70");
            table.Add(new XPathMessageQuery(xpath8, context), "value80");
            table.Add(new XPathMessageQuery(xpath9, context), "value90");
            table.Add(new XPathMessageQuery(xpath10, context), "value100");
            table.Add(new XPathMessageQuery(xpath11, context), "value110");
            return table;
        }
    }
}
Imports System.IO
Imports System.Xml
Imports System.ServiceModel.Dispatcher
Imports System.ServiceModel
Imports System.ServiceModel.Channels
Imports System.Xml.XPath

Namespace MessageQueryExamples


    Public Class Program

        Public Shared Sub Main(ByVal args As String())

            ' The XPathMessageQueryCollection inherits from MessageQueryCollection.
            Dim queryCollection As XPathMessageQueryCollection = MessageHelper.SetupQueryCollection()


            ' Create a message and a copy of the message. You must create a buffered copy to access the message body.
            Dim mess As Message = MessageHelper.CreateMessage()
            Dim mb As MessageBuffer = mess.CreateBufferedCopy(Integer.MaxValue)


            ' Evaluate every query in the collection. 
            Dim q As XPathMessageQuery
            For Each q In queryCollection

                ' Evaluate the query. Note the result type is an XPathResult.
                Dim qPathResult As XPathResult = q.Evaluate(Of XPathResult)(mb)

                ' Use the XPathResult to determine the result type.
                Console.WriteLine("Result type: {0}", qPathResult.ResultType)

                ' The following code prints the result according to the result type.

                If qPathResult.ResultType = XPathResultType.String Then
                    Console.WriteLine("{0} = {1}", q.Expression, qPathResult.GetResultAsString())
                End If
                If (qPathResult.ResultType = XPathResultType.NodeSet) Then

                    ' Iterate through the node set.
                    Dim ns As XPathNodeIterator = qPathResult.GetResultAsNodeset()
                    Dim n As XPathNavigator
                    For Each n In ns
                        Console.WriteLine("     {0} = {1}", q.Expression, n.Value)
                    Next
                End If
                If qPathResult.ResultType = XPathResultType.Number Then
                    Console.WriteLine("    {0} = {1}", q.Expression, qPathResult.GetResultAsNumber())
                End If
                If qPathResult.ResultType = XPathResultType.Boolean Then
                    Console.WriteLine("    {0} ={1}", q.Expression, qPathResult.GetResultAsBoolean())
                End If

                If qPathResult.ResultType = XPathResultType.Error Then
                    Console.WriteLine("    Error!")
                End If

            Next

            Console.WriteLine()

            ' The alternate code below demonstrates similar funcionality using a MessageQueryTable.
            ' The difference is the KeyValuePair that requires a key to index each value.
            ' The code uses the expression as the key, and an arbitrary value for the value.           

            'Dim mq As MessageQueryTable(Of String) = MessageHelper.SetupTable()
            'Dim kv As KeyValuePair(Of MessageQuery, String)
            'For Each kv In mq
            '    '
            '    Dim xp As XPathMessageQuery = CType(kv.Key, XPathMessageQuery)
            '    Console.WriteLine("Value = {0}", kv.Value)
            '    Console.WriteLine("{0} = {1}", xp.Expression, xp.Evaluate(Of String)(mb))
            'Next

            Console.ReadLine()
        End Sub
        Private Shared Sub Evaluate(ByVal p1 As Object)
            Throw New NotImplementedException
        End Sub
    End Class

    Public Class MessageHelper

        Shared messageBody As String = _
              "<PurchaseOrder date='today'>" + _
                  "<Number>ABC-2009-XYZ</Number>" + _
                  "<Department>OnlineSales</Department>" + _
                  "<Items>" + _
                      "<Item product='nail' quantity='1'>item1</Item>" + _
                      "<Item product='screw' quantity='2'>item2</Item>" + _
                      "<Item product='brad' quantity='3'>" + _
                          "<SpecialOffer/>" + _
                          "Special item4" + _
                      "</Item>" + _
                      "<Item product='SpecialNails' quantity='9'>item5</Item>" + _
                      "<Item product='SpecialBrads' quantity='11'>" + _
                          "<SpecialOffer/>" + _
                          "Special item6" + _
                      "</Item>" + _
                      "<Item product='hammer' quantity='1'>item7</Item>" + _
                      "<Item product='wrench' quantity='2'>item8</Item>" + _
                  "</Items>" + _
                "<Comments>" + _
                "Rush order" + _
                "</Comments>" + _
              "</PurchaseOrder>"

        Public Shared xpath As String = "/s12:Envelope/s12:Body/PurchaseOrder/Items/Item[@quantity = 1]"
        Public Shared xpath2 As String = "/s12:Envelope/s12:Body/PurchaseOrder/Items/Item[@product = 'nail']"
        Public Shared xpath3 As String = "/s12:Envelope/s12:Body/PurchaseOrder/Comments"
        Public Shared xpath4 As String = "count(/s12:Envelope/s12:Body/PurchaseOrder/Items/Item)"
        Public Shared xpath5 As String = "substring(string(/s12:Envelope/s12:Body/PurchaseOrder/Number),5,4)"
        Public Shared xpath6 As String = "/s12:Envelope/s12:Body/PurchaseOrder/Department='OnlineSales'"
        Public Shared xpath7 As String = "//PurchaseOrder/@date"
        Public Shared xpath8 As String = "//SpecialOffer/ancestor::Item[@product = 'brad']"

        ' Invoke the correlation data function.


        Public Shared xpath9 As String = "sm:correlation-data('CorrelationData1')"
        Public Shared xpath10 As String = "sm:correlation-data('CorrelationData2')"

        Public Shared xpath11 As String = "/s12:Envelope/s12:Body/PurchaseOrder/Items/Item[@quantity = 2]"


        Public Shared Function CreateMessage() As Message

            Dim stringReader As New StringReader(messageBody)
            Dim xmlReader As New XmlTextReader(stringReader)
            Dim message As Message = message.CreateMessage( _
                MessageVersion.Soap12WSAddressing10, "http://purchaseorder", xmlReader)

            ' Add two correlation properties using lambda expressions. The property names are
            ' CorrelationData1 and CorrelationData2. The first goes to "value1" and the
            ' second to "value2". You can use your own property names and values.
            Dim data As New CorrelationDataMessageProperty()

            data.Add("CorrelationData1", Function() "value1")
            data.Add("CorrelationData2", Function() "value2")
            message.Properties(CorrelationDataMessageProperty.Name) = data


            Return message
        End Function


        Public Shared Function SetupQueryCollection() As XPathMessageQueryCollection

            ' Create the query collection and add the XPath queries to it. To create
            ' the query, you must also use a new XPathMessageContext.

            Dim queryCollection As New XPathMessageQueryCollection()

            Dim context As XPathMessageContext = New XPathMessageContext()
            queryCollection.Add(New XPathMessageQuery(xpath, context))
            queryCollection.Add(New XPathMessageQuery(xpath2, context))
            queryCollection.Add(New XPathMessageQuery(xpath3, context))
            queryCollection.Add(New XPathMessageQuery(xpath4, context))
            queryCollection.Add(New XPathMessageQuery(xpath5, context))
            queryCollection.Add(New XPathMessageQuery(xpath6, context))
            queryCollection.Add(New XPathMessageQuery(xpath7, context))
            queryCollection.Add(New XPathMessageQuery(xpath8, context))
            queryCollection.Add(New XPathMessageQuery(xpath9, context))
            queryCollection.Add(New XPathMessageQuery(xpath10, context))
            queryCollection.Add(New XPathMessageQuery(xpath11, context))

            Return queryCollection
        End Function

        Public Shared Function SetupTable() As MessageQueryTable(Of String)

            ' This is optional code to demonstrate using a MessageQueryTable.
            ' Compare this to the MessageQueryCollection.
            Dim table As MessageQueryTable(Of String) = New MessageQueryTable(Of String)()
            Dim context As XPathMessageContext = New XPathMessageContext()


            ' The code adds a KeyValuePair to the table. Each pair requires
            ' a query used as the Key, and a value that is paired to the key.
            table.Add(New XPathMessageQuery(xpath, context), "value10")
            table.Add(New XPathMessageQuery(xpath2, context), "value20")
            table.Add(New XPathMessageQuery(xpath3, context), "value30")
            table.Add(New XPathMessageQuery(xpath4, context), "value40")
            table.Add(New XPathMessageQuery(xpath5, context), "value50")
            table.Add(New XPathMessageQuery(xpath6, context), "value60")
            table.Add(New XPathMessageQuery(xpath7, context), "value70")
            table.Add(New XPathMessageQuery(xpath8, context), "value80")
            table.Add(New XPathMessageQuery(xpath9, context), "value90")
            table.Add(New XPathMessageQuery(xpath10, context), "value100")
            table.Add(New XPathMessageQuery(xpath11, context), "value110")
            Return table
        End Function
    End Class
End Namespace

S’applique à