Semaphore.GetAccessControl Méthode
Définition
Important
Certaines informations portent sur la préversion du produit qui est susceptible d’être en grande partie modifiée avant sa publication. Microsoft exclut toute garantie, expresse ou implicite, concernant les informations fournies ici.
Reçoit la sécurité de contrôle d'accès pour un sémaphore système nommé.
public:
System::Security::AccessControl::SemaphoreSecurity ^ GetAccessControl();public System.Security.AccessControl.SemaphoreSecurity GetAccessControl ();member this.GetAccessControl : unit -> System.Security.AccessControl.SemaphoreSecurityPublic Function GetAccessControl () As SemaphoreSecurityRetours
Objet SemaphoreSecurity qui représente la sécurité de contrôle d'accès pour le sémaphore système nommé.
Exceptions
L’objet Semaphore actif représente un sémaphore système nommé, et l’utilisateur ne dispose pas des droits ReadPermissions.
- ou - L’objet Semaphore actif représente un sémaphore système nommé, mais il n’a pas été ouvert avec les droits ReadPermissions.
Exemples
L’exemple de code suivant illustre le comportement interprocesseur d’un sémaphore nommé avec la sécurité du contrôle d’accès. L’exemple utilise la OpenExisting(String) surcharge de méthode pour tester l’existence d’un sémaphore nommé.
Si le sémaphore n’existe pas, il est créé avec un nombre maximal de deux et avec la sécurité de contrôle d’accès qui refuse à l’utilisateur actuel le droit d’utiliser le sémaphore, mais accorde le droit de lire et de modifier les autorisations sur le sémaphore.
Si vous exécutez l’exemple compilé à partir de deux fenêtres de commande, la deuxième copie lève une exception de violation d’accès sur l’appel à la OpenExisting(String) méthode. L’exception est interceptée et l’exemple utilise la surcharge de OpenExisting(String, SemaphoreRights) méthode pour ouvrir le sémaphore avec les droits nécessaires pour lire et modifier les autorisations. La sécurité du contrôle d’accès pour le sémaphore système est obtenue à l’aide de la GetAccessControl méthode.
Une fois les autorisations modifiées, le sémaphore est ouvert avec les droits requis pour entrer et libérer. Si vous exécutez l’exemple compilé à partir d’une troisième fenêtre de commande, il s’exécute à l’aide des nouvelles autorisations.
#using <System.dll>
using namespace System;
using namespace System::Threading;
using namespace System::Security::AccessControl;
using namespace System::Security::Permissions;
public ref class Example
{
public:
[SecurityPermissionAttribute(SecurityAction::Demand, Flags = SecurityPermissionFlag::UnmanagedCode)]
static void main()
{
String^ semaphoreName = L"SemaphoreExample5";
Semaphore^ sem = nullptr;
bool doesNotExist = false;
bool unauthorized = false;
// Attempt to open the named semaphore.
try
{
// Open the semaphore with (SemaphoreRights.Synchronize
// | SemaphoreRights.Modify), to enter and release the
// named semaphore.
//
sem = Semaphore::OpenExisting( semaphoreName );
}
catch ( WaitHandleCannotBeOpenedException^ ex )
{
Console::WriteLine( L"Semaphore does not exist." );
doesNotExist = true;
}
catch ( UnauthorizedAccessException^ ex )
{
Console::WriteLine( L"Unauthorized access: {0}", ex->Message );
unauthorized = true;
}
// There are three cases: (1) The semaphore does not exist.
// (2) The semaphore exists, but the current user doesn't
// have access. (3) The semaphore exists and the user has
// access.
//
if ( doesNotExist )
{
// The semaphore does not exist, so create it.
//
// The value of this variable is set by the semaphore
// constructor. It is true if the named system semaphore was
// created, and false if the named semaphore already existed.
//
bool semaphoreWasCreated;
// Create an access control list (ACL) that denies the
// current user the right to enter or release the
// semaphore, but allows the right to read and change
// security information for the semaphore.
//
String^ user = String::Concat( Environment::UserDomainName,
L"\\", Environment::UserName );
SemaphoreSecurity^ semSec = gcnew SemaphoreSecurity;
SemaphoreAccessRule^ rule = gcnew SemaphoreAccessRule( user,
static_cast<SemaphoreRights>(
SemaphoreRights::Synchronize |
SemaphoreRights::Modify ),
AccessControlType::Deny );
semSec->AddAccessRule( rule );
rule = gcnew SemaphoreAccessRule( user,
static_cast<SemaphoreRights>(
SemaphoreRights::ReadPermissions |
SemaphoreRights::ChangePermissions ),
AccessControlType::Allow );
semSec->AddAccessRule( rule );
// Create a Semaphore object that represents the system
// semaphore named by the constant 'semaphoreName', with
// maximum count three, initial count three, and the
// specified security access. The Boolean value that
// indicates creation of the underlying system object is
// placed in semaphoreWasCreated.
//
sem = gcnew Semaphore( 3,3,semaphoreName,semaphoreWasCreated,semSec );
// If the named system semaphore was created, it can be
// used by the current instance of this program, even
// though the current user is denied access. The current
// program enters the semaphore. Otherwise, exit the
// program.
//
if ( semaphoreWasCreated )
{
Console::WriteLine( L"Created the semaphore." );
}
else
{
Console::WriteLine( L"Unable to create the semaphore." );
return;
}
}
else if ( unauthorized )
{
// Open the semaphore to read and change the access
// control security. The access control security defined
// above allows the current user to do this.
//
try
{
sem = Semaphore::OpenExisting( semaphoreName,
static_cast<SemaphoreRights>(
SemaphoreRights::ReadPermissions |
SemaphoreRights::ChangePermissions ));
// Get the current ACL. This requires
// SemaphoreRights.ReadPermissions.
SemaphoreSecurity^ semSec = sem->GetAccessControl();
String^ user = String::Concat( Environment::UserDomainName,
L"\\", Environment::UserName );
// First, the rule that denied the current user
// the right to enter and release the semaphore must
// be removed.
SemaphoreAccessRule^ rule = gcnew SemaphoreAccessRule( user,
static_cast<SemaphoreRights>(
SemaphoreRights::Synchronize |
SemaphoreRights::Modify ),
AccessControlType::Deny );
semSec->RemoveAccessRule( rule );
// Now grant the user the correct rights.
//
rule = gcnew SemaphoreAccessRule( user,
static_cast<SemaphoreRights>(
SemaphoreRights::Synchronize |
SemaphoreRights::Modify ),
AccessControlType::Allow );
semSec->AddAccessRule( rule );
// Update the ACL. This requires
// SemaphoreRights.ChangePermissions.
sem->SetAccessControl( semSec );
Console::WriteLine( L"Updated semaphore security." );
// Open the semaphore with (SemaphoreRights.Synchronize
// | SemaphoreRights.Modify), the rights required to
// enter and release the semaphore.
//
sem = Semaphore::OpenExisting( semaphoreName );
}
catch ( UnauthorizedAccessException^ ex )
{
Console::WriteLine( L"Unable to change permissions: {0}", ex->Message );
return;
}
}
// Enter the semaphore, and hold it until the program
// exits.
//
try
{
sem->WaitOne();
Console::WriteLine( L"Entered the semaphore." );
Console::WriteLine( L"Press the Enter key to exit." );
Console::ReadLine();
sem->Release();
}
catch ( UnauthorizedAccessException^ ex )
{
Console::WriteLine( L"Unauthorized access: {0}", ex->Message );
}
}
};
using System;
using System.Threading;
using System.Security.AccessControl;
internal class Example
{
internal static void Main()
{
const string semaphoreName = "SemaphoreExample5";
Semaphore sem = null;
bool doesNotExist = false;
bool unauthorized = false;
// Attempt to open the named semaphore.
try
{
// Open the semaphore with (SemaphoreRights.Synchronize
// | SemaphoreRights.Modify), to enter and release the
// named semaphore.
//
sem = Semaphore.OpenExisting(semaphoreName);
}
catch(WaitHandleCannotBeOpenedException)
{
Console.WriteLine("Semaphore does not exist.");
doesNotExist = true;
}
catch(UnauthorizedAccessException ex)
{
Console.WriteLine("Unauthorized access: {0}", ex.Message);
unauthorized = true;
}
// There are three cases: (1) The semaphore does not exist.
// (2) The semaphore exists, but the current user doesn't
// have access. (3) The semaphore exists and the user has
// access.
//
if (doesNotExist)
{
// The semaphore does not exist, so create it.
//
// The value of this variable is set by the semaphore
// constructor. It is true if the named system semaphore was
// created, and false if the named semaphore already existed.
//
bool semaphoreWasCreated;
// Create an access control list (ACL) that denies the
// current user the right to enter or release the
// semaphore, but allows the right to read and change
// security information for the semaphore.
//
string user = Environment.UserDomainName + "\\"
+ Environment.UserName;
SemaphoreSecurity semSec = new SemaphoreSecurity();
SemaphoreAccessRule rule = new SemaphoreAccessRule(
user,
SemaphoreRights.Synchronize | SemaphoreRights.Modify,
AccessControlType.Deny);
semSec.AddAccessRule(rule);
rule = new SemaphoreAccessRule(
user,
SemaphoreRights.ReadPermissions | SemaphoreRights.ChangePermissions,
AccessControlType.Allow);
semSec.AddAccessRule(rule);
// Create a Semaphore object that represents the system
// semaphore named by the constant 'semaphoreName', with
// maximum count three, initial count three, and the
// specified security access. The Boolean value that
// indicates creation of the underlying system object is
// placed in semaphoreWasCreated.
//
sem = new Semaphore(3, 3, semaphoreName,
out semaphoreWasCreated, semSec);
// If the named system semaphore was created, it can be
// used by the current instance of this program, even
// though the current user is denied access. The current
// program enters the semaphore. Otherwise, exit the
// program.
//
if (semaphoreWasCreated)
{
Console.WriteLine("Created the semaphore.");
}
else
{
Console.WriteLine("Unable to create the semaphore.");
return;
}
}
else if (unauthorized)
{
// Open the semaphore to read and change the access
// control security. The access control security defined
// above allows the current user to do this.
//
try
{
sem = Semaphore.OpenExisting(
semaphoreName,
SemaphoreRights.ReadPermissions
| SemaphoreRights.ChangePermissions);
// Get the current ACL. This requires
// SemaphoreRights.ReadPermissions.
SemaphoreSecurity semSec = sem.GetAccessControl();
string user = Environment.UserDomainName + "\\"
+ Environment.UserName;
// First, the rule that denied the current user
// the right to enter and release the semaphore must
// be removed.
SemaphoreAccessRule rule = new SemaphoreAccessRule(
user,
SemaphoreRights.Synchronize | SemaphoreRights.Modify,
AccessControlType.Deny);
semSec.RemoveAccessRule(rule);
// Now grant the user the correct rights.
//
rule = new SemaphoreAccessRule(user,
SemaphoreRights.Synchronize | SemaphoreRights.Modify,
AccessControlType.Allow);
semSec.AddAccessRule(rule);
// Update the ACL. This requires
// SemaphoreRights.ChangePermissions.
sem.SetAccessControl(semSec);
Console.WriteLine("Updated semaphore security.");
// Open the semaphore with (SemaphoreRights.Synchronize
// | SemaphoreRights.Modify), the rights required to
// enter and release the semaphore.
//
sem = Semaphore.OpenExisting(semaphoreName);
}
catch(UnauthorizedAccessException ex)
{
Console.WriteLine("Unable to change permissions: {0}", ex.Message);
return;
}
}
// Enter the semaphore, and hold it until the program
// exits.
//
try
{
sem.WaitOne();
Console.WriteLine("Entered the semaphore.");
Console.WriteLine("Press the Enter key to exit.");
Console.ReadLine();
sem.Release();
}
catch(UnauthorizedAccessException ex)
{
Console.WriteLine("Unauthorized access: {0}", ex.Message);
}
}
}
Imports System.Threading
Imports System.Security.AccessControl
Friend Class Example
<MTAThread> _
Friend Shared Sub Main()
Const semaphoreName As String = "SemaphoreExample5"
Dim sem As Semaphore = Nothing
Dim doesNotExist as Boolean = False
Dim unauthorized As Boolean = False
' Attempt to open the named semaphore.
Try
' Open the semaphore with (SemaphoreRights.Synchronize
' Or SemaphoreRights.Modify), to enter and release the
' named semaphore.
'
sem = Semaphore.OpenExisting(semaphoreName)
Catch ex As WaitHandleCannotBeOpenedException
Console.WriteLine("Semaphore does not exist.")
doesNotExist = True
Catch ex As UnauthorizedAccessException
Console.WriteLine("Unauthorized access: {0}", ex.Message)
unauthorized = True
End Try
' There are three cases: (1) The semaphore does not exist.
' (2) The semaphore exists, but the current user doesn't
' have access. (3) The semaphore exists and the user has
' access.
'
If doesNotExist Then
' The semaphore does not exist, so create it.
'
' The value of this variable is set by the semaphore
' constructor. It is True if the named system semaphore was
' created, and False if the named semaphore already existed.
'
Dim semaphoreWasCreated As Boolean
' Create an access control list (ACL) that denies the
' current user the right to enter or release the
' semaphore, but allows the right to read and change
' security information for the semaphore.
'
Dim user As String = Environment.UserDomainName _
& "\" & Environment.UserName
Dim semSec As New SemaphoreSecurity()
Dim rule As New SemaphoreAccessRule(user, _
SemaphoreRights.Synchronize Or SemaphoreRights.Modify, _
AccessControlType.Deny)
semSec.AddAccessRule(rule)
rule = New SemaphoreAccessRule(user, _
SemaphoreRights.ReadPermissions Or _
SemaphoreRights.ChangePermissions, _
AccessControlType.Allow)
semSec.AddAccessRule(rule)
' Create a Semaphore object that represents the system
' semaphore named by the constant 'semaphoreName', with
' maximum count three, initial count three, and the
' specified security access. The Boolean value that
' indicates creation of the underlying system object is
' placed in semaphoreWasCreated.
'
sem = New Semaphore(3, 3, semaphoreName, _
semaphoreWasCreated, semSec)
' If the named system semaphore was created, it can be
' used by the current instance of this program, even
' though the current user is denied access. The current
' program enters the semaphore. Otherwise, exit the
' program.
'
If semaphoreWasCreated Then
Console.WriteLine("Created the semaphore.")
Else
Console.WriteLine("Unable to create the semaphore.")
Return
End If
ElseIf unauthorized Then
' Open the semaphore to read and change the access
' control security. The access control security defined
' above allows the current user to do this.
'
Try
sem = Semaphore.OpenExisting(semaphoreName, _
SemaphoreRights.ReadPermissions Or _
SemaphoreRights.ChangePermissions)
' Get the current ACL. This requires
' SemaphoreRights.ReadPermissions.
Dim semSec As SemaphoreSecurity = sem.GetAccessControl()
Dim user As String = Environment.UserDomainName _
& "\" & Environment.UserName
' First, the rule that denied the current user
' the right to enter and release the semaphore must
' be removed.
Dim rule As New SemaphoreAccessRule(user, _
SemaphoreRights.Synchronize Or SemaphoreRights.Modify, _
AccessControlType.Deny)
semSec.RemoveAccessRule(rule)
' Now grant the user the correct rights.
'
rule = New SemaphoreAccessRule(user, _
SemaphoreRights.Synchronize Or SemaphoreRights.Modify, _
AccessControlType.Allow)
semSec.AddAccessRule(rule)
' Update the ACL. This requires
' SemaphoreRights.ChangePermissions.
sem.SetAccessControl(semSec)
Console.WriteLine("Updated semaphore security.")
' Open the semaphore with (SemaphoreRights.Synchronize
' Or SemaphoreRights.Modify), the rights required to
' enter and release the semaphore.
'
sem = Semaphore.OpenExisting(semaphoreName)
Catch ex As UnauthorizedAccessException
Console.WriteLine("Unable to change permissions: {0}", _
ex.Message)
Return
End Try
End If
' Enter the semaphore, and hold it until the program
' exits.
'
Try
sem.WaitOne()
Console.WriteLine("Entered the semaphore.")
Console.WriteLine("Press the Enter key to exit.")
Console.ReadLine()
sem.Release()
Catch ex As UnauthorizedAccessException
Console.WriteLine("Unauthorized access: {0}", _
ex.Message)
End Try
End Sub
End Class
Remarques
La GetAccessControl méthode utilise la combinaison suivante d’indicateurs (combiné à l’aide de l’opération OR au niveau du bit) pour rechercher des autorisations : AccessControlSections.Access, AccessControlSections.Owneret AccessControlSections.Group.
L’utilisateur doit avoir SemaphoreRights.ReadPermissions des droits pour appeler cette méthode, et le sémaphore doit avoir été ouvert avec SemaphoreRights.ReadPermissions des droits.
Sur un sémaphore local, la sécurité du contrôle d’accès n’est pas pertinente. Si l’objet Semaphore ne représente pas de sémaphore système nommé, cette méthode retourne un SemaphoreSecurity objet qui accorde tous les droits à un utilisateur.