ReadOnlyCollection<T>.Item[Int32] ReadOnlyCollection<T>.Item[Int32] ReadOnlyCollection<T>.Item[Int32] ReadOnlyCollection<T>.Item[Int32] Property

정의

지정한 인덱스에 있는 요소를 가져옵니다.Gets the element at the specified index.

public:
 property T default[int] { T get(int index); };
public T this[int index] { get; }
member this.Item(int) : 'T
Default Public ReadOnly Property Item(index As Integer) As T

매개 변수

index
Int32 Int32 Int32 Int32

가져올 요소의 0부터 시작하는 인덱스입니다.The zero-based index of the element to get.

속성 값

T T T T

지정한 인덱스의 요소입니다.The element at the specified index.

구현

예외

index가 0보다 작은 경우index is less than zero.

또는-or- indexCount보다 크거나 같은 경우index is equal to or greater than Count.

예제

다음 코드 예제에서는의 몇몇 구성원이 ReadOnlyCollection<T> 클래스입니다.The following code example demonstrates several members of the ReadOnlyCollection<T> class. 코드 예제에서는 List<T> 의 문자열 및에서는를 추가 합니다.The code example creates a List<T> of strings and adds four dinosaur names to it. 코드 예제에서는 그런 다음에 ReadOnlyCollection<T>합니다.The code example then wraps the list in a ReadOnlyCollection<T>.

보여 주는 후는 Count, Contains, Item[Int32], 및 IList.IndexOf 멤버는 코드 예에서는 합니다 ReadOnlyCollection<T> 원본에 대 한 일 뿐 List<T> 에 새 항목을 추가 하 여는 List<T> 및 내용을 표시 합니다 ReadOnlyCollection<T>합니다.After demonstrating the Count, Contains, Item[Int32], and IList.IndexOf members, the code example shows that the ReadOnlyCollection<T> is just a wrapper for the original List<T> by adding a new item to the List<T> and displaying the contents of the ReadOnlyCollection<T>.

마지막으로, 코드 예제에서는 배열 컬렉션 보다 큰 만들고 사용 하 여 CopyTo 배열의 중간에 컬렉션의 요소를 삽입 하는 방법입니다.Finally, the code example creates an array larger than the collection and uses the CopyTo method to insert the elements of the collection into the middle of the array.

using namespace System;
using namespace System::Collections::Generic;
using namespace System::Collections::ObjectModel;

void main()
{
    List<String^>^ dinosaurs = gcnew List<String^>();

    dinosaurs->Add("Tyrannosaurus");
    dinosaurs->Add("Amargasaurus");
    dinosaurs->Add("Deinonychus");
    dinosaurs->Add("Compsognathus");

    ReadOnlyCollection<String^>^ readOnlyDinosaurs = 
        gcnew ReadOnlyCollection<String^>(dinosaurs);

    Console::WriteLine();
    for each(String^ dinosaur in readOnlyDinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    Console::WriteLine("\nCount: {0}", readOnlyDinosaurs->Count);

    Console::WriteLine("\nContains(\"Deinonychus\"): {0}", 
        readOnlyDinosaurs->Contains("Deinonychus"));

    Console::WriteLine("\nreadOnlyDinosaurs[3]: {0}", 
        readOnlyDinosaurs[3]);

    Console::WriteLine("\nIndexOf(\"Compsognathus\"): {0}", 
        readOnlyDinosaurs->IndexOf("Compsognathus"));

    Console::WriteLine("\nInsert into the wrapped List:");
    Console::WriteLine("Insert(2, \"Oviraptor\")");
    dinosaurs->Insert(2, "Oviraptor");

    Console::WriteLine();
    for each( String^ dinosaur in readOnlyDinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    array<String^>^ dinoArray = 
        gcnew array<String^>(readOnlyDinosaurs->Count + 2);
    readOnlyDinosaurs->CopyTo(dinoArray, 1);

    Console::WriteLine("\nCopied array has {0} elements:", 
        dinoArray->Length);
    for each( String^ dinosaur in dinoArray )
    {
        Console::WriteLine("\"{0}\"", dinosaur);
    }
}

/* This code example produces the following output:

Tyrannosaurus
Amargasaurus
Deinonychus
Compsognathus

Count: 4

Contains("Deinonychus"): True

readOnlyDinosaurs[3]: Compsognathus

IndexOf("Compsognathus"): 3

Insert into the wrapped List:
Insert(2, "Oviraptor")

Tyrannosaurus
Amargasaurus
Oviraptor
Deinonychus
Compsognathus

Copied array has 7 elements:
""
"Tyrannosaurus"
"Amargasaurus"
"Oviraptor"
"Deinonychus"
"Compsognathus"
""
 */
using System;
using System.Collections.Generic;
using System.Collections.ObjectModel;

public class Example
{
    public static void Main()
    {
        List<string> dinosaurs = new List<string>();

        dinosaurs.Add("Tyrannosaurus");
        dinosaurs.Add("Amargasaurus");
        dinosaurs.Add("Deinonychus");
        dinosaurs.Add("Compsognathus");

        ReadOnlyCollection<string> readOnlyDinosaurs = 
            new ReadOnlyCollection<string>(dinosaurs);

        Console.WriteLine();
        foreach( string dinosaur in readOnlyDinosaurs )
        {
            Console.WriteLine(dinosaur);
        }

        Console.WriteLine("\nCount: {0}", readOnlyDinosaurs.Count);

        Console.WriteLine("\nContains(\"Deinonychus\"): {0}", 
            readOnlyDinosaurs.Contains("Deinonychus"));

        Console.WriteLine("\nreadOnlyDinosaurs[3]: {0}", 
            readOnlyDinosaurs[3]);

        Console.WriteLine("\nIndexOf(\"Compsognathus\"): {0}", 
            readOnlyDinosaurs.IndexOf("Compsognathus"));

        Console.WriteLine("\nInsert into the wrapped List:");
        Console.WriteLine("Insert(2, \"Oviraptor\")");
        dinosaurs.Insert(2, "Oviraptor");

        Console.WriteLine();
        foreach( string dinosaur in readOnlyDinosaurs )
        {
            Console.WriteLine(dinosaur);
        }

        string[] dinoArray = new string[readOnlyDinosaurs.Count + 2];
        readOnlyDinosaurs.CopyTo(dinoArray, 1);

        Console.WriteLine("\nCopied array has {0} elements:", 
            dinoArray.Length);
        foreach( string dinosaur in dinoArray )
        {
            Console.WriteLine("\"{0}\"", dinosaur);
        }
    }
}

/* This code example produces the following output:

Tyrannosaurus
Amargasaurus
Deinonychus
Compsognathus

Count: 4

Contains("Deinonychus"): True

readOnlyDinosaurs[3]: Compsognathus

IndexOf("Compsognathus"): 3

Insert into the wrapped List:
Insert(2, "Oviraptor")

Tyrannosaurus
Amargasaurus
Oviraptor
Deinonychus
Compsognathus

Copied array has 7 elements:
""
"Tyrannosaurus"
"Amargasaurus"
"Oviraptor"
"Deinonychus"
"Compsognathus"
""
 */
Imports System
Imports System.Collections.Generic
Imports System.Collections.ObjectModel

Public Class Example

    Public Shared Sub Main()

        Dim dinosaurs As New List(Of String)

        dinosaurs.Add("Tyrannosaurus")
        dinosaurs.Add("Amargasaurus")
        dinosaurs.Add("Deinonychus")
        dinosaurs.Add("Compsognathus")

        Dim readOnlyDinosaurs As _
            New ReadOnlyCollection(Of String)(dinosaurs)

        Console.WriteLine()
        For Each dinosaur As String In readOnlyDinosaurs
            Console.WriteLine(dinosaur)
        Next

        Console.WriteLine(vbLf & "Count: {0}", _
            readOnlyDinosaurs.Count)

        Console.WriteLine(vbLf & "Contains(""Deinonychus""): {0}", _
            readOnlyDinosaurs.Contains("Deinonychus"))

        Console.WriteLine(vbLf & _
            "readOnlyDinosaurs(3): {0}", readOnlyDinosaurs(3))

        Console.WriteLine(vbLf & "IndexOf(""Compsognathus""): {0}", _
            readOnlyDinosaurs.IndexOf("Compsognathus"))

        Console.WriteLine(vbLf & "Insert into the wrapped List:")
        Console.WriteLine("Insert(2, ""Oviraptor"")")
        dinosaurs.Insert(2, "Oviraptor")

        Console.WriteLine()
        For Each dinosaur As String In readOnlyDinosaurs
            Console.WriteLine(dinosaur)
        Next

        Dim dinoArray(readOnlyDinosaurs.Count + 1) As String
        readOnlyDinosaurs.CopyTo(dinoArray, 1)

        Console.WriteLine(vbLf & "Copied array has {0} elements:", _
            dinoArray.Length)
        For Each dinosaur As String In dinoArray
            Console.WriteLine("""{0}""", dinosaur)
        Next

   End Sub
End Class

' This code example produces the following output:
'
'Tyrannosaurus
'Amargasaurus
'Deinonychus
'Compsognathus
'
'Count: 4
'
'Contains("Deinonychus"): True
'
'readOnlyDinosaurs(3): Compsognathus
'
'IndexOf("Compsognathus"): 3
'
'Insert into the wrapped List:
'Insert(2, "Oviraptor")
'
'Tyrannosaurus
'Amargasaurus
'Oviraptor
'Deinonychus
'Compsognathus
'
'Copied array has 7 elements:
'""
'"Tyrannosaurus"
'"Amargasaurus"
'"Oviraptor"
'"Deinonychus"
'"Compsognathus"
'""

설명

이 속성은 다음 C# 구문을 사용 하 여 컬렉션의 특정 요소에 액세스 하는 기능을 제공 합니다. myCollection[index] (myCollection(index) Visual basic에서).This property provides the ability to access a specific element in the collection by using the following C# syntax: myCollection[index] (myCollection(index) in Visual Basic).

C# 언어를 사용 하는 구현 하는 대신 인덱서를 정의 하는 키워드는 Item[Int32] 속성입니다.The C# language uses the this keyword to define the indexers instead of implementing the Item[Int32] property. Visual Basic에서는 동일한 인덱싱 기능을 제공하는 Item[Int32]을 기본 속성으로 구현합니다.Visual Basic implements Item[Int32] as a default property, which provides the same indexing functionality.

이 속성 값을 검색하는 것은 O(1) 연산입니다.Retrieving the value of this property is an O(1) operation.

적용 대상

추가 정보