SecurityKeyIdentifier SecurityKeyIdentifier SecurityKeyIdentifier SecurityKeyIdentifier Class

정의

키 식별자를 나타냅니다.Represents a key identifier.

public ref class SecurityKeyIdentifier : System::Collections::Generic::IEnumerable<System::IdentityModel::Tokens::SecurityKeyIdentifierClause ^>
public class SecurityKeyIdentifier : System.Collections.Generic.IEnumerable<System.IdentityModel.Tokens.SecurityKeyIdentifierClause>
type SecurityKeyIdentifier = class
    interface seq<SecurityKeyIdentifierClause>
    interface IEnumerable
Public Class SecurityKeyIdentifier
Implements IEnumerable(Of SecurityKeyIdentifierClause)
상속
SecurityKeyIdentifierSecurityKeyIdentifierSecurityKeyIdentifierSecurityKeyIdentifier
구현

설명

일반적으로 사용자 지정 보안 토큰 서비스를 만드는 경우를 제외하면 SecurityKeyIdentifier가 사용되지 않습니다.Typically, the SecurityKeyIdentifier is not used, other than when a custom security token service is created. 보안 토큰 서비스에서 보안 토큰을 반환할 때 발급된 보안 토큰에는 연결된 보안 토큰과 연결되지 않은 보안 토큰에 대한 참조가 포함되어 있습니다.When a security token service returns a security token, the issued security token contains references to attached and unattached security tokens. 연결된 참조는 SOAP 메시지의 보안 헤더에 포함된 보안 토큰을 나타내며 연결되지 않은 참조는 SOAP 메시지의 보안 헤더에 포함되지 않은 보안 토큰을 나타냅니다.Attached references refer to security tokens that are contained within the security header of a SOAP message and unattached references are security tokens that are not included within the security header of a SOAP message. 일반적으로 이러한 참조는 발급된 보안 토큰의 신뢰성을 확인합니다.These references typically affirm the authenticity of the issued security token. 이러한 참조는 SecurityKeyIdentifierClause 클래스에서 파생된 클래스를 통해 표현됩니다.These references are represented by classes that derive from the SecurityKeyIdentifierClause class. SecurityKeyIdentifier 클래스는 이 참조의 컬렉션을 포함합니다.The SecurityKeyIdentifier class contains the collection of these references.

생성자

SecurityKeyIdentifier() SecurityKeyIdentifier() SecurityKeyIdentifier() SecurityKeyIdentifier()

SecurityKeyIdentifier 클래스의 새 인스턴스를 초기화합니다.Initializes a new instance of the SecurityKeyIdentifier class.

SecurityKeyIdentifier(SecurityKeyIdentifierClause[]) SecurityKeyIdentifier(SecurityKeyIdentifierClause[]) SecurityKeyIdentifier(SecurityKeyIdentifierClause[]) SecurityKeyIdentifier(SecurityKeyIdentifierClause[])

지정된 키 식별자 절을 사용하여 SecurityKeyIdentifier 클래스의 새 인스턴스를 초기화합니다.Initializes a new instance of the SecurityKeyIdentifier class using the specified key identifier clauses.

속성

CanCreateKey CanCreateKey CanCreateKey CanCreateKey

키 식별자 절 중 최소한 하나에 대해 키를 만들 수 있는지 여부를 나타내는 값을 가져옵니다.Gets a value that indicates whether a key can be created for at least one of the key identifier clauses.

Count Count Count Count

키 식별자 절의 수를 가져옵니다.Gets the number of key identifier clauses.

IsReadOnly IsReadOnly IsReadOnly IsReadOnly

이 인스턴스의 속성이 읽기 전용인지 여부를 나타내는 값을 가져옵니다.Gets a value that indicates whether the properties of this instance are read-only.

Item[Int32] Item[Int32] Item[Int32] Item[Int32]

지정된 인덱스에서 키 식별자 절을 가져옵니다.Gets the key identifier clause at the specified index.

메서드

Add(SecurityKeyIdentifierClause) Add(SecurityKeyIdentifierClause) Add(SecurityKeyIdentifierClause) Add(SecurityKeyIdentifierClause)

키 식별자 절을 목록 끝에 추가합니다.Adds a key identifier clause to the end of the list.

CreateKey() CreateKey() CreateKey() CreateKey()

키 식별자 절 중 하나에 대한 키를 만듭니다.Creates a key for one of the key identifier clauses.

Equals(Object) Equals(Object) Equals(Object) Equals(Object)

지정한 개체와 현재 개체가 같은지 여부를 확인합니다.Determines whether the specified object is equal to the current object.

(Inherited from Object)
Find<TClause>() Find<TClause>() Find<TClause>() Find<TClause>()

지정된 형식의 키 식별자 절을 검색한 후 전체 컬렉션 내에서 첫 번째 항목을 반환합니다.Searches for a key identifier clause of the specified type and returns the first occurrence within the entire collection.

GetEnumerator() GetEnumerator() GetEnumerator() GetEnumerator()

키 식별자 절의 컬렉션을 반복하는 열거자를 반환합니다.Returns an enumerator that iterates through the collection of key identifier clauses.

GetHashCode() GetHashCode() GetHashCode() GetHashCode()

기본 해시 함수로 작동합니다.Serves as the default hash function.

(Inherited from Object)
GetType() GetType() GetType() GetType()

현재 인스턴스의 Type을 가져옵니다.Gets the Type of the current instance.

(Inherited from Object)
MakeReadOnly() MakeReadOnly() MakeReadOnly() MakeReadOnly()

이 인스턴스를 읽기 전용으로 만듭니다.Causes this instance to be read-only.

MemberwiseClone() MemberwiseClone() MemberwiseClone() MemberwiseClone()

현재 Object의 단순 복사본을 만듭니다.Creates a shallow copy of the current Object.

(Inherited from Object)
ToString() ToString() ToString() ToString()

현재 개체를 반환합니다.Returns the current object.

TryFind<TClause>(TClause) TryFind<TClause>(TClause) TryFind<TClause>(TClause) TryFind<TClause>(TClause)

지정된 형식의 키 식별자 절을 검색하여 해당 형식의 절을 찾을 수 있는지 여부를 나타내는 값을 반환합니다.Searches for a key identifier clause of the specified type and returns a value that indicates whether a clause of that type could be found. 형식이 검색되면 out 매개 변수를 통해 반환됩니다.When a type is found it is returned in the out parameter.

명시적 인터페이스 구현

IEnumerable.GetEnumerator() IEnumerable.GetEnumerator() IEnumerable.GetEnumerator() IEnumerable.GetEnumerator()

키 식별자 절의 컬렉션을 반복하는 열거자를 반환합니다.Returns an enumerator that iterates through the collection of key identifier clauses.

Extension Methods

CopyToDataTable<T>(IEnumerable<T>) CopyToDataTable<T>(IEnumerable<T>) CopyToDataTable<T>(IEnumerable<T>) CopyToDataTable<T>(IEnumerable<T>)

제네릭 매개 변수 TDataTable인 지정된 입력 DataRow 개체를 사용하여 IEnumerable<T> 개체의 복사본이 들어 있는 DataRow을 반환합니다.Returns a DataTable that contains copies of the DataRow objects, given an input IEnumerable<T> object where the generic parameter T is DataRow.

CopyToDataTable<T>(IEnumerable<T>, DataTable, LoadOption) CopyToDataTable<T>(IEnumerable<T>, DataTable, LoadOption) CopyToDataTable<T>(IEnumerable<T>, DataTable, LoadOption) CopyToDataTable<T>(IEnumerable<T>, DataTable, LoadOption)

제네릭 매개 변수 TDataRow인 지정된 입력 DataTable 개체를 사용하여 IEnumerable<T> 개체를 지정된 DataRow에 복사합니다.Copies DataRow objects to the specified DataTable, given an input IEnumerable<T> object where the generic parameter T is DataRow.

CopyToDataTable<T>(IEnumerable<T>, DataTable, LoadOption, FillErrorEventHandler) CopyToDataTable<T>(IEnumerable<T>, DataTable, LoadOption, FillErrorEventHandler) CopyToDataTable<T>(IEnumerable<T>, DataTable, LoadOption, FillErrorEventHandler) CopyToDataTable<T>(IEnumerable<T>, DataTable, LoadOption, FillErrorEventHandler)

제네릭 매개 변수 TDataRow인 지정된 입력 DataTable 개체를 사용하여 IEnumerable<T> 개체를 지정된 DataRow에 복사합니다.Copies DataRow objects to the specified DataTable, given an input IEnumerable<T> object where the generic parameter T is DataRow.

Aggregate<TSource>(IEnumerable<TSource>, Func<TSource,TSource,TSource>) Aggregate<TSource>(IEnumerable<TSource>, Func<TSource,TSource,TSource>) Aggregate<TSource>(IEnumerable<TSource>, Func<TSource,TSource,TSource>) Aggregate<TSource>(IEnumerable<TSource>, Func<TSource,TSource,TSource>)

시퀀스에 누적기 함수를 적용합니다.Applies an accumulator function over a sequence.

Aggregate<TSource,TAccumulate>(IEnumerable<TSource>, TAccumulate, Func<TAccumulate,TSource,TAccumulate>) Aggregate<TSource,TAccumulate>(IEnumerable<TSource>, TAccumulate, Func<TAccumulate,TSource,TAccumulate>) Aggregate<TSource,TAccumulate>(IEnumerable<TSource>, TAccumulate, Func<TAccumulate,TSource,TAccumulate>) Aggregate<TSource,TAccumulate>(IEnumerable<TSource>, TAccumulate, Func<TAccumulate,TSource,TAccumulate>)

시퀀스에 누적기 함수를 적용합니다.Applies an accumulator function over a sequence. 지정된 시드 값은 초기 누적기 값으로 사용됩니다.The specified seed value is used as the initial accumulator value.

Aggregate<TSource,TAccumulate,TResult>(IEnumerable<TSource>, TAccumulate, Func<TAccumulate,TSource,TAccumulate>, Func<TAccumulate,TResult>) Aggregate<TSource,TAccumulate,TResult>(IEnumerable<TSource>, TAccumulate, Func<TAccumulate,TSource,TAccumulate>, Func<TAccumulate,TResult>) Aggregate<TSource,TAccumulate,TResult>(IEnumerable<TSource>, TAccumulate, Func<TAccumulate,TSource,TAccumulate>, Func<TAccumulate,TResult>) Aggregate<TSource,TAccumulate,TResult>(IEnumerable<TSource>, TAccumulate, Func<TAccumulate,TSource,TAccumulate>, Func<TAccumulate,TResult>)

시퀀스에 누적기 함수를 적용합니다.Applies an accumulator function over a sequence. 지정된 시드 값은 초기 누적기 값으로 사용되고 지정된 함수는 결과 값을 선택하는 데 사용됩니다.The specified seed value is used as the initial accumulator value, and the specified function is used to select the result value.

All<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) All<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) All<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) All<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>)

시퀀스의 모든 요소가 특정 조건에 맞는지 확인합니다.Determines whether all elements of a sequence satisfy a condition.

Any<TSource>(IEnumerable<TSource>) Any<TSource>(IEnumerable<TSource>) Any<TSource>(IEnumerable<TSource>) Any<TSource>(IEnumerable<TSource>)

시퀀스에 요소가 하나라도 있는지 확인합니다.Determines whether a sequence contains any elements.

Any<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) Any<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) Any<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) Any<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>)

시퀀스에 특정 조건에 맞는 요소가 있는지 확인합니다.Determines whether any element of a sequence satisfies a condition.

Append<TSource>(IEnumerable<TSource>, TSource) Append<TSource>(IEnumerable<TSource>, TSource) Append<TSource>(IEnumerable<TSource>, TSource) Append<TSource>(IEnumerable<TSource>, TSource)

시퀀스의 끝에 값을 추가합니다.Appends a value to the end of the sequence.

AsEnumerable<TSource>(IEnumerable<TSource>) AsEnumerable<TSource>(IEnumerable<TSource>) AsEnumerable<TSource>(IEnumerable<TSource>) AsEnumerable<TSource>(IEnumerable<TSource>)

IEnumerable<T>로 형식화된 입력을 반환합니다.Returns the input typed as IEnumerable<T>.

Average(IEnumerable<Decimal>) Average(IEnumerable<Decimal>) Average(IEnumerable<Decimal>) Average(IEnumerable<Decimal>)

Decimal 값 시퀀스의 평균을 계산합니다.Computes the average of a sequence of Decimal values.

Average(IEnumerable<Double>) Average(IEnumerable<Double>) Average(IEnumerable<Double>) Average(IEnumerable<Double>)

Double 값 시퀀스의 평균을 계산합니다.Computes the average of a sequence of Double values.

Average(IEnumerable<Int32>) Average(IEnumerable<Int32>) Average(IEnumerable<Int32>) Average(IEnumerable<Int32>)

Int32 값 시퀀스의 평균을 계산합니다.Computes the average of a sequence of Int32 values.

Average(IEnumerable<Int64>) Average(IEnumerable<Int64>) Average(IEnumerable<Int64>) Average(IEnumerable<Int64>)

Int64 값 시퀀스의 평균을 계산합니다.Computes the average of a sequence of Int64 values.

Average(IEnumerable<Nullable<Decimal>>) Average(IEnumerable<Nullable<Decimal>>) Average(IEnumerable<Nullable<Decimal>>) Average(IEnumerable<Nullable<Decimal>>)

nullable Decimal 값 시퀀스의 평균을 계산합니다.Computes the average of a sequence of nullable Decimal values.

Average(IEnumerable<Nullable<Double>>) Average(IEnumerable<Nullable<Double>>) Average(IEnumerable<Nullable<Double>>) Average(IEnumerable<Nullable<Double>>)

nullable Double 값 시퀀스의 평균을 계산합니다.Computes the average of a sequence of nullable Double values.

Average(IEnumerable<Nullable<Int32>>) Average(IEnumerable<Nullable<Int32>>) Average(IEnumerable<Nullable<Int32>>) Average(IEnumerable<Nullable<Int32>>)

nullable Int32 값 시퀀스의 평균을 계산합니다.Computes the average of a sequence of nullable Int32 values.

Average(IEnumerable<Nullable<Int64>>) Average(IEnumerable<Nullable<Int64>>) Average(IEnumerable<Nullable<Int64>>) Average(IEnumerable<Nullable<Int64>>)

nullable Int64 값 시퀀스의 평균을 계산합니다.Computes the average of a sequence of nullable Int64 values.

Average(IEnumerable<Nullable<Single>>) Average(IEnumerable<Nullable<Single>>) Average(IEnumerable<Nullable<Single>>) Average(IEnumerable<Nullable<Single>>)

nullable Single 값 시퀀스의 평균을 계산합니다.Computes the average of a sequence of nullable Single values.

Average(IEnumerable<Single>) Average(IEnumerable<Single>) Average(IEnumerable<Single>) Average(IEnumerable<Single>)

Single 값 시퀀스의 평균을 계산합니다.Computes the average of a sequence of Single values.

Average<TSource>(IEnumerable<TSource>, Func<TSource,Decimal>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Decimal>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Decimal>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Decimal>)

입력 시퀀스의 각 요소에 대해 변형 함수를 호출하여 가져온 Decimal 값 시퀀스의 평균을 계산합니다.Computes the average of a sequence of Decimal values that are obtained by invoking a transform function on each element of the input sequence.

Average<TSource>(IEnumerable<TSource>, Func<TSource,Double>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Double>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Double>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Double>)

입력 시퀀스의 각 요소에 대해 변형 함수를 호출하여 가져온 Double 값 시퀀스의 평균을 계산합니다.Computes the average of a sequence of Double values that are obtained by invoking a transform function on each element of the input sequence.

Average<TSource>(IEnumerable<TSource>, Func<TSource,Int32>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Int32>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Int32>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Int32>)

입력 시퀀스의 각 요소에 대해 변형 함수를 호출하여 가져온 Int32 값 시퀀스의 평균을 계산합니다.Computes the average of a sequence of Int32 values that are obtained by invoking a transform function on each element of the input sequence.

Average<TSource>(IEnumerable<TSource>, Func<TSource,Int64>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Int64>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Int64>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Int64>)

입력 시퀀스의 각 요소에 대해 변형 함수를 호출하여 가져온 Int64 값 시퀀스의 평균을 계산합니다.Computes the average of a sequence of Int64 values that are obtained by invoking a transform function on each element of the input sequence.

Average<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Decimal>>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Decimal>>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Decimal>>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Decimal>>)

입력 시퀀스의 각 요소에 대해 변형 함수를 호출하여 가져온 nullable Decimal 값 시퀀스의 평균을 계산합니다.Computes the average of a sequence of nullable Decimal values that are obtained by invoking a transform function on each element of the input sequence.

Average<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Double>>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Double>>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Double>>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Double>>)

입력 시퀀스의 각 요소에 대해 변형 함수를 호출하여 가져온 nullable Double 값 시퀀스의 평균을 계산합니다.Computes the average of a sequence of nullable Double values that are obtained by invoking a transform function on each element of the input sequence.

Average<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int32>>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int32>>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int32>>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int32>>)

입력 시퀀스의 각 요소에 대해 변형 함수를 호출하여 가져온 nullable Int32 값 시퀀스의 평균을 계산합니다.Computes the average of a sequence of nullable Int32 values that are obtained by invoking a transform function on each element of the input sequence.

Average<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int64>>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int64>>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int64>>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int64>>)

입력 시퀀스의 각 요소에 대해 변형 함수를 호출하여 가져온 nullable Int64 값 시퀀스의 평균을 계산합니다.Computes the average of a sequence of nullable Int64 values that are obtained by invoking a transform function on each element of the input sequence.

Average<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Single>>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Single>>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Single>>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Single>>)

입력 시퀀스의 각 요소에 대해 변형 함수를 호출하여 가져온 nullable Single 값 시퀀스의 평균을 계산합니다.Computes the average of a sequence of nullable Single values that are obtained by invoking a transform function on each element of the input sequence.

Average<TSource>(IEnumerable<TSource>, Func<TSource,Single>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Single>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Single>) Average<TSource>(IEnumerable<TSource>, Func<TSource,Single>)

입력 시퀀스의 각 요소에 대해 변형 함수를 호출하여 가져온 Single 값 시퀀스의 평균을 계산합니다.Computes the average of a sequence of Single values that are obtained by invoking a transform function on each element of the input sequence.

Cast<TResult>(IEnumerable) Cast<TResult>(IEnumerable) Cast<TResult>(IEnumerable) Cast<TResult>(IEnumerable)

IEnumerable의 요소를 지정된 형식으로 캐스팅합니다.Casts the elements of an IEnumerable to the specified type.

Concat<TSource>(IEnumerable<TSource>, IEnumerable<TSource>) Concat<TSource>(IEnumerable<TSource>, IEnumerable<TSource>) Concat<TSource>(IEnumerable<TSource>, IEnumerable<TSource>) Concat<TSource>(IEnumerable<TSource>, IEnumerable<TSource>)

두 시퀀스를 연결합니다.Concatenates two sequences.

Contains<TSource>(IEnumerable<TSource>, TSource) Contains<TSource>(IEnumerable<TSource>, TSource) Contains<TSource>(IEnumerable<TSource>, TSource) Contains<TSource>(IEnumerable<TSource>, TSource)

기본 같음 비교자를 사용하여 시퀀스에 지정된 요소가 들어 있는지 확인합니다.Determines whether a sequence contains a specified element by using the default equality comparer.

Contains<TSource>(IEnumerable<TSource>, TSource, IEqualityComparer<TSource>) Contains<TSource>(IEnumerable<TSource>, TSource, IEqualityComparer<TSource>) Contains<TSource>(IEnumerable<TSource>, TSource, IEqualityComparer<TSource>) Contains<TSource>(IEnumerable<TSource>, TSource, IEqualityComparer<TSource>)

지정된 IEqualityComparer<T>를 사용하여 시퀀스에 지정된 요소가 들어 있는지 확인합니다.Determines whether a sequence contains a specified element by using a specified IEqualityComparer<T>.

Count<TSource>(IEnumerable<TSource>) Count<TSource>(IEnumerable<TSource>) Count<TSource>(IEnumerable<TSource>) Count<TSource>(IEnumerable<TSource>)

시퀀스의 요소 수를 반환합니다.Returns the number of elements in a sequence.

Count<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) Count<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) Count<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) Count<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>)

지정된 시퀀스에서 특정 조건에 맞는 요소 수를 나타내는 숫자를 반환합니다.Returns a number that represents how many elements in the specified sequence satisfy a condition.

DefaultIfEmpty<TSource>(IEnumerable<TSource>) DefaultIfEmpty<TSource>(IEnumerable<TSource>) DefaultIfEmpty<TSource>(IEnumerable<TSource>) DefaultIfEmpty<TSource>(IEnumerable<TSource>)

지정된 시퀀스의 요소를 반환하거나, 시퀀스가 비어 있으면 형식 매개 변수의 기본값을 반환합니다.Returns the elements of the specified sequence or the type parameter's default value in a singleton collection if the sequence is empty.

DefaultIfEmpty<TSource>(IEnumerable<TSource>, TSource) DefaultIfEmpty<TSource>(IEnumerable<TSource>, TSource) DefaultIfEmpty<TSource>(IEnumerable<TSource>, TSource) DefaultIfEmpty<TSource>(IEnumerable<TSource>, TSource)

지정된 시퀀스의 요소를 반환하거나, 시퀀스가 비어 있으면 singleton 컬렉션의 지정된 값을 반환합니다.Returns the elements of the specified sequence or the specified value in a singleton collection if the sequence is empty.

Distinct<TSource>(IEnumerable<TSource>) Distinct<TSource>(IEnumerable<TSource>) Distinct<TSource>(IEnumerable<TSource>) Distinct<TSource>(IEnumerable<TSource>)

기본 같음 비교자로 값을 비교하여 시퀀스에서 고유 요소를 반환합니다.Returns distinct elements from a sequence by using the default equality comparer to compare values.

Distinct<TSource>(IEnumerable<TSource>, IEqualityComparer<TSource>) Distinct<TSource>(IEnumerable<TSource>, IEqualityComparer<TSource>) Distinct<TSource>(IEnumerable<TSource>, IEqualityComparer<TSource>) Distinct<TSource>(IEnumerable<TSource>, IEqualityComparer<TSource>)

지정된 IEqualityComparer<T>로 값을 비교하여 시퀀스에서 고유 요소를 반환합니다.Returns distinct elements from a sequence by using a specified IEqualityComparer<T> to compare values.

ElementAt<TSource>(IEnumerable<TSource>, Int32) ElementAt<TSource>(IEnumerable<TSource>, Int32) ElementAt<TSource>(IEnumerable<TSource>, Int32) ElementAt<TSource>(IEnumerable<TSource>, Int32)

시퀀스에서 지정된 인덱스의 요소를 반환합니다.Returns the element at a specified index in a sequence.

ElementAtOrDefault<TSource>(IEnumerable<TSource>, Int32) ElementAtOrDefault<TSource>(IEnumerable<TSource>, Int32) ElementAtOrDefault<TSource>(IEnumerable<TSource>, Int32) ElementAtOrDefault<TSource>(IEnumerable<TSource>, Int32)

시퀀스에서 지정된 인덱스의 요소를 반환하거나, 인덱스가 범위를 벗어나면 기본 값을 반환합니다.Returns the element at a specified index in a sequence or a default value if the index is out of range.

Except<TSource>(IEnumerable<TSource>, IEnumerable<TSource>) Except<TSource>(IEnumerable<TSource>, IEnumerable<TSource>) Except<TSource>(IEnumerable<TSource>, IEnumerable<TSource>) Except<TSource>(IEnumerable<TSource>, IEnumerable<TSource>)

기본 같음 비교자로 값을 비교하여 두 시퀀스의 차집합을 구합니다.Produces the set difference of two sequences by using the default equality comparer to compare values.

Except<TSource>(IEnumerable<TSource>, IEnumerable<TSource>, IEqualityComparer<TSource>) Except<TSource>(IEnumerable<TSource>, IEnumerable<TSource>, IEqualityComparer<TSource>) Except<TSource>(IEnumerable<TSource>, IEnumerable<TSource>, IEqualityComparer<TSource>) Except<TSource>(IEnumerable<TSource>, IEnumerable<TSource>, IEqualityComparer<TSource>)

지정된 IEqualityComparer<T>로 값을 비교하여 두 시퀀스의 차집합을 구합니다.Produces the set difference of two sequences by using the specified IEqualityComparer<T> to compare values.

First<TSource>(IEnumerable<TSource>) First<TSource>(IEnumerable<TSource>) First<TSource>(IEnumerable<TSource>) First<TSource>(IEnumerable<TSource>)

시퀀스의 첫 번째 요소를 반환합니다.Returns the first element of a sequence.

First<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) First<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) First<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) First<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>)

시퀀스에서 지정된 조건에 맞는 첫 번째 요소를 반환합니다.Returns the first element in a sequence that satisfies a specified condition.

FirstOrDefault<TSource>(IEnumerable<TSource>) FirstOrDefault<TSource>(IEnumerable<TSource>) FirstOrDefault<TSource>(IEnumerable<TSource>) FirstOrDefault<TSource>(IEnumerable<TSource>)

시퀀스의 첫 번째 요소를 반환하거나, 시퀀스에 요소가 없으면 기본값을 반환합니다.Returns the first element of a sequence, or a default value if the sequence contains no elements.

FirstOrDefault<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) FirstOrDefault<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) FirstOrDefault<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) FirstOrDefault<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>)

시퀀스에서 특정 조건에 맞는 첫 번째 요소를 반환하거나, 이러한 요소가 없으면 기본값을 반환합니다.Returns the first element of the sequence that satisfies a condition or a default value if no such element is found.

GroupBy<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>) GroupBy<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>) GroupBy<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>) GroupBy<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>)

지정된 키 선택기 함수에 따라 시퀀스의 요소를 그룹화합니다.Groups the elements of a sequence according to a specified key selector function.

GroupBy<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>, IEqualityComparer<TKey>) GroupBy<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>, IEqualityComparer<TKey>) GroupBy<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>, IEqualityComparer<TKey>) GroupBy<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>, IEqualityComparer<TKey>)

지정된 키 선택기 함수에 따라 지정된 비교자로 키를 비교하여 시퀀스의 요소를 그룹화합니다.Groups the elements of a sequence according to a specified key selector function and compares the keys by using a specified comparer.

GroupBy<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>) GroupBy<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>) GroupBy<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>) GroupBy<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>)

지정된 키 선택기 함수에 따라 시퀀스의 요소를 그룹화하고 지정된 함수를 사용하여 각 그룹의 요소를 투영합니다.Groups the elements of a sequence according to a specified key selector function and projects the elements for each group by using a specified function.

GroupBy<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>, IEqualityComparer<TKey>) GroupBy<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>, IEqualityComparer<TKey>) GroupBy<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>, IEqualityComparer<TKey>) GroupBy<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>, IEqualityComparer<TKey>)

키 선택기 함수에 따라 시퀀스의 요소를 그룹화합니다.Groups the elements of a sequence according to a key selector function. 키는 비교자를 통해 비교되고 각 그룹의 요소는 지정된 함수를 통해 투영됩니다.The keys are compared by using a comparer and each group's elements are projected by using a specified function.

GroupBy<TSource,TKey,TResult>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TKey,IEnumerable<TSource>,TResult>) GroupBy<TSource,TKey,TResult>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TKey,IEnumerable<TSource>,TResult>) GroupBy<TSource,TKey,TResult>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TKey,IEnumerable<TSource>,TResult>) GroupBy<TSource,TKey,TResult>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TKey,IEnumerable<TSource>,TResult>)

지정된 키 누적기 함수에 따라 시퀀스의 요소를 그룹화하고 각 그룹의 결과 값과 해당 키를 만듭니다.Groups the elements of a sequence according to a specified key selector function and creates a result value from each group and its key.

GroupBy<TSource,TKey,TResult>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TKey,IEnumerable<TSource>,TResult>, IEqualityComparer<TKey>) GroupBy<TSource,TKey,TResult>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TKey,IEnumerable<TSource>,TResult>, IEqualityComparer<TKey>) GroupBy<TSource,TKey,TResult>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TKey,IEnumerable<TSource>,TResult>, IEqualityComparer<TKey>) GroupBy<TSource,TKey,TResult>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TKey,IEnumerable<TSource>,TResult>, IEqualityComparer<TKey>)

지정된 키 누적기 함수에 따라 시퀀스의 요소를 그룹화하고 각 그룹의 결과 값과 해당 키를 만듭니다.Groups the elements of a sequence according to a specified key selector function and creates a result value from each group and its key. 키는 지정된 비교자를 통해 비교됩니다.The keys are compared by using a specified comparer.

GroupBy<TSource,TKey,TElement,TResult>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>, Func<TKey,IEnumerable<TElement>,TResult>) GroupBy<TSource,TKey,TElement,TResult>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>, Func<TKey,IEnumerable<TElement>,TResult>) GroupBy<TSource,TKey,TElement,TResult>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>, Func<TKey,IEnumerable<TElement>,TResult>) GroupBy<TSource,TKey,TElement,TResult>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>, Func<TKey,IEnumerable<TElement>,TResult>)

지정된 키 누적기 함수에 따라 시퀀스의 요소를 그룹화하고 각 그룹의 결과 값과 해당 키를 만듭니다.Groups the elements of a sequence according to a specified key selector function and creates a result value from each group and its key. 각 그룹의 요소는 지정된 함수를 통해 투영됩니다.The elements of each group are projected by using a specified function.

GroupBy<TSource,TKey,TElement,TResult>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>, Func<TKey,IEnumerable<TElement>,TResult>, IEqualityComparer<TKey>) GroupBy<TSource,TKey,TElement,TResult>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>, Func<TKey,IEnumerable<TElement>,TResult>, IEqualityComparer<TKey>) GroupBy<TSource,TKey,TElement,TResult>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>, Func<TKey,IEnumerable<TElement>,TResult>, IEqualityComparer<TKey>) GroupBy<TSource,TKey,TElement,TResult>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>, Func<TKey,IEnumerable<TElement>,TResult>, IEqualityComparer<TKey>)

지정된 키 누적기 함수에 따라 시퀀스의 요소를 그룹화하고 각 그룹의 결과 값과 해당 키를 만듭니다.Groups the elements of a sequence according to a specified key selector function and creates a result value from each group and its key. 키 값은 지정된 비교자를 통해 비교되고 각 그룹의 요소는 지정된 함수를 통해 투영됩니다.Key values are compared by using a specified comparer, and the elements of each group are projected by using a specified function.

GroupJoin<TOuter,TInner,TKey,TResult>(IEnumerable<TOuter>, IEnumerable<TInner>, Func<TOuter,TKey>, Func<TInner,TKey>, Func<TOuter,IEnumerable<TInner>,TResult>) GroupJoin<TOuter,TInner,TKey,TResult>(IEnumerable<TOuter>, IEnumerable<TInner>, Func<TOuter,TKey>, Func<TInner,TKey>, Func<TOuter,IEnumerable<TInner>,TResult>) GroupJoin<TOuter,TInner,TKey,TResult>(IEnumerable<TOuter>, IEnumerable<TInner>, Func<TOuter,TKey>, Func<TInner,TKey>, Func<TOuter,IEnumerable<TInner>,TResult>) GroupJoin<TOuter,TInner,TKey,TResult>(IEnumerable<TOuter>, IEnumerable<TInner>, Func<TOuter,TKey>, Func<TInner,TKey>, Func<TOuter,IEnumerable<TInner>,TResult>)

키가 같은지 여부에 따라 두 시퀀스의 요소를 연관시키고 결과를 그룹화합니다.Correlates the elements of two sequences based on equality of keys and groups the results. 기본 같음 비교자를 사용하여 키를 비교합니다.The default equality comparer is used to compare keys.

GroupJoin<TOuter,TInner,TKey,TResult>(IEnumerable<TOuter>, IEnumerable<TInner>, Func<TOuter,TKey>, Func<TInner,TKey>, Func<TOuter,IEnumerable<TInner>,TResult>, IEqualityComparer<TKey>) GroupJoin<TOuter,TInner,TKey,TResult>(IEnumerable<TOuter>, IEnumerable<TInner>, Func<TOuter,TKey>, Func<TInner,TKey>, Func<TOuter,IEnumerable<TInner>,TResult>, IEqualityComparer<TKey>) GroupJoin<TOuter,TInner,TKey,TResult>(IEnumerable<TOuter>, IEnumerable<TInner>, Func<TOuter,TKey>, Func<TInner,TKey>, Func<TOuter,IEnumerable<TInner>,TResult>, IEqualityComparer<TKey>) GroupJoin<TOuter,TInner,TKey,TResult>(IEnumerable<TOuter>, IEnumerable<TInner>, Func<TOuter,TKey>, Func<TInner,TKey>, Func<TOuter,IEnumerable<TInner>,TResult>, IEqualityComparer<TKey>)

키가 같은지 여부에 따라 두 시퀀스의 요소를 연관시키고 결과를 그룹화합니다.Correlates the elements of two sequences based on key equality and groups the results. 지정된 IEqualityComparer<T>를 사용하여 키를 비교합니다.A specified IEqualityComparer<T> is used to compare keys.

Intersect<TSource>(IEnumerable<TSource>, IEnumerable<TSource>) Intersect<TSource>(IEnumerable<TSource>, IEnumerable<TSource>) Intersect<TSource>(IEnumerable<TSource>, IEnumerable<TSource>) Intersect<TSource>(IEnumerable<TSource>, IEnumerable<TSource>)

기본 같음 비교자로 값을 비교하여 두 시퀀스의 교집합을 구합니다.Produces the set intersection of two sequences by using the default equality comparer to compare values.

Intersect<TSource>(IEnumerable<TSource>, IEnumerable<TSource>, IEqualityComparer<TSource>) Intersect<TSource>(IEnumerable<TSource>, IEnumerable<TSource>, IEqualityComparer<TSource>) Intersect<TSource>(IEnumerable<TSource>, IEnumerable<TSource>, IEqualityComparer<TSource>) Intersect<TSource>(IEnumerable<TSource>, IEnumerable<TSource>, IEqualityComparer<TSource>)

지정된 IEqualityComparer<T>로 값을 비교하여 두 시퀀스의 교집합을 구합니다.Produces the set intersection of two sequences by using the specified IEqualityComparer<T> to compare values.

Join<TOuter,TInner,TKey,TResult>(IEnumerable<TOuter>, IEnumerable<TInner>, Func<TOuter,TKey>, Func<TInner,TKey>, Func<TOuter,TInner,TResult>) Join<TOuter,TInner,TKey,TResult>(IEnumerable<TOuter>, IEnumerable<TInner>, Func<TOuter,TKey>, Func<TInner,TKey>, Func<TOuter,TInner,TResult>) Join<TOuter,TInner,TKey,TResult>(IEnumerable<TOuter>, IEnumerable<TInner>, Func<TOuter,TKey>, Func<TInner,TKey>, Func<TOuter,TInner,TResult>) Join<TOuter,TInner,TKey,TResult>(IEnumerable<TOuter>, IEnumerable<TInner>, Func<TOuter,TKey>, Func<TInner,TKey>, Func<TOuter,TInner,TResult>)

일치하는 키를 기준으로 두 시퀀스의 요소를 연관시킵니다.Correlates the elements of two sequences based on matching keys. 기본 같음 비교자를 사용하여 키를 비교합니다.The default equality comparer is used to compare keys.

Join<TOuter,TInner,TKey,TResult>(IEnumerable<TOuter>, IEnumerable<TInner>, Func<TOuter,TKey>, Func<TInner,TKey>, Func<TOuter,TInner,TResult>, IEqualityComparer<TKey>) Join<TOuter,TInner,TKey,TResult>(IEnumerable<TOuter>, IEnumerable<TInner>, Func<TOuter,TKey>, Func<TInner,TKey>, Func<TOuter,TInner,TResult>, IEqualityComparer<TKey>) Join<TOuter,TInner,TKey,TResult>(IEnumerable<TOuter>, IEnumerable<TInner>, Func<TOuter,TKey>, Func<TInner,TKey>, Func<TOuter,TInner,TResult>, IEqualityComparer<TKey>) Join<TOuter,TInner,TKey,TResult>(IEnumerable<TOuter>, IEnumerable<TInner>, Func<TOuter,TKey>, Func<TInner,TKey>, Func<TOuter,TInner,TResult>, IEqualityComparer<TKey>)

일치하는 키를 기준으로 두 시퀀스의 요소를 연관시킵니다.Correlates the elements of two sequences based on matching keys. 지정된 IEqualityComparer<T>를 사용하여 키를 비교합니다.A specified IEqualityComparer<T> is used to compare keys.

Last<TSource>(IEnumerable<TSource>) Last<TSource>(IEnumerable<TSource>) Last<TSource>(IEnumerable<TSource>) Last<TSource>(IEnumerable<TSource>)

시퀀스의 마지막 요소를 반환합니다.Returns the last element of a sequence.

Last<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) Last<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) Last<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) Last<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>)

시퀀스에서 지정된 조건에 맞는 마지막 요소를 반환합니다.Returns the last element of a sequence that satisfies a specified condition.

LastOrDefault<TSource>(IEnumerable<TSource>) LastOrDefault<TSource>(IEnumerable<TSource>) LastOrDefault<TSource>(IEnumerable<TSource>) LastOrDefault<TSource>(IEnumerable<TSource>)

시퀀스의 마지막 요소를 반환하거나, 시퀀스에 요소가 없으면 기본값을 반환합니다.Returns the last element of a sequence, or a default value if the sequence contains no elements.

LastOrDefault<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) LastOrDefault<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) LastOrDefault<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) LastOrDefault<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>)

시퀀스에서 특정 조건에 맞는 마지막 요소를 반환하거나, 이러한 요소가 없으면 기본값을 반환합니다.Returns the last element of a sequence that satisfies a condition or a default value if no such element is found.

LongCount<TSource>(IEnumerable<TSource>) LongCount<TSource>(IEnumerable<TSource>) LongCount<TSource>(IEnumerable<TSource>) LongCount<TSource>(IEnumerable<TSource>)

시퀀스의 총 요소 수를 나타내는 Int64를 반환합니다.Returns an Int64 that represents the total number of elements in a sequence.

LongCount<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) LongCount<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) LongCount<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) LongCount<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>)

시퀀스에서 특정 조건에 맞는 요소 수를 나타내는 Int64를 반환합니다.Returns an Int64 that represents how many elements in a sequence satisfy a condition.

Max(IEnumerable<Decimal>) Max(IEnumerable<Decimal>) Max(IEnumerable<Decimal>) Max(IEnumerable<Decimal>)

Decimal 값 시퀀스의 최대값을 반환합니다.Returns the maximum value in a sequence of Decimal values.

Max(IEnumerable<Double>) Max(IEnumerable<Double>) Max(IEnumerable<Double>) Max(IEnumerable<Double>)

Double 값 시퀀스의 최대값을 반환합니다.Returns the maximum value in a sequence of Double values.

Max(IEnumerable<Int32>) Max(IEnumerable<Int32>) Max(IEnumerable<Int32>) Max(IEnumerable<Int32>)

Int32 값 시퀀스의 최대값을 반환합니다.Returns the maximum value in a sequence of Int32 values.

Max(IEnumerable<Int64>) Max(IEnumerable<Int64>) Max(IEnumerable<Int64>) Max(IEnumerable<Int64>)

Int64 값 시퀀스의 최대값을 반환합니다.Returns the maximum value in a sequence of Int64 values.

Max(IEnumerable<Nullable<Decimal>>) Max(IEnumerable<Nullable<Decimal>>) Max(IEnumerable<Nullable<Decimal>>) Max(IEnumerable<Nullable<Decimal>>)

nullable Decimal 값 시퀀스의 최대값을 반환합니다.Returns the maximum value in a sequence of nullable Decimal values.

Max(IEnumerable<Nullable<Double>>) Max(IEnumerable<Nullable<Double>>) Max(IEnumerable<Nullable<Double>>) Max(IEnumerable<Nullable<Double>>)

nullable Double 값 시퀀스의 최대값을 반환합니다.Returns the maximum value in a sequence of nullable Double values.

Max(IEnumerable<Nullable<Int32>>) Max(IEnumerable<Nullable<Int32>>) Max(IEnumerable<Nullable<Int32>>) Max(IEnumerable<Nullable<Int32>>)

nullable Int32 값 시퀀스의 최대값을 반환합니다.Returns the maximum value in a sequence of nullable Int32 values.

Max(IEnumerable<Nullable<Int64>>) Max(IEnumerable<Nullable<Int64>>) Max(IEnumerable<Nullable<Int64>>) Max(IEnumerable<Nullable<Int64>>)

nullable Int64 값 시퀀스의 최대값을 반환합니다.Returns the maximum value in a sequence of nullable Int64 values.

Max(IEnumerable<Nullable<Single>>) Max(IEnumerable<Nullable<Single>>) Max(IEnumerable<Nullable<Single>>) Max(IEnumerable<Nullable<Single>>)

nullable Single 값 시퀀스의 최대값을 반환합니다.Returns the maximum value in a sequence of nullable Single values.

Max(IEnumerable<Single>) Max(IEnumerable<Single>) Max(IEnumerable<Single>) Max(IEnumerable<Single>)

Single 값 시퀀스의 최대값을 반환합니다.Returns the maximum value in a sequence of Single values.

Max<TSource>(IEnumerable<TSource>) Max<TSource>(IEnumerable<TSource>) Max<TSource>(IEnumerable<TSource>) Max<TSource>(IEnumerable<TSource>)

제네릭 시퀀스의 최대값을 반환합니다.Returns the maximum value in a generic sequence.

Max<TSource>(IEnumerable<TSource>, Func<TSource,Decimal>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Decimal>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Decimal>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Decimal>)

시퀀스의 각 요소에 대해 변형 함수를 호출하고 최대 Decimal 값을 반환합니다.Invokes a transform function on each element of a sequence and returns the maximum Decimal value.

Max<TSource>(IEnumerable<TSource>, Func<TSource,Double>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Double>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Double>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Double>)

시퀀스의 각 요소에 대해 변형 함수를 호출하고 최대 Double 값을 반환합니다.Invokes a transform function on each element of a sequence and returns the maximum Double value.

Max<TSource>(IEnumerable<TSource>, Func<TSource,Int32>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Int32>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Int32>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Int32>)

시퀀스의 각 요소에 대해 변형 함수를 호출하고 최대 Int32 값을 반환합니다.Invokes a transform function on each element of a sequence and returns the maximum Int32 value.

Max<TSource>(IEnumerable<TSource>, Func<TSource,Int64>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Int64>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Int64>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Int64>)

시퀀스의 각 요소에 대해 변형 함수를 호출하고 최대 Int64 값을 반환합니다.Invokes a transform function on each element of a sequence and returns the maximum Int64 value.

Max<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Decimal>>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Decimal>>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Decimal>>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Decimal>>)

시퀀스의 각 요소에 대해 변형 함수를 호출하고 최대 nullable Decimal 값을 반환합니다.Invokes a transform function on each element of a sequence and returns the maximum nullable Decimal value.

Max<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Double>>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Double>>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Double>>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Double>>)

시퀀스의 각 요소에 대해 변형 함수를 호출하고 최대 nullable Double 값을 반환합니다.Invokes a transform function on each element of a sequence and returns the maximum nullable Double value.

Max<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int32>>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int32>>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int32>>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int32>>)

시퀀스의 각 요소에 대해 변형 함수를 호출하고 최대 nullable Int32 값을 반환합니다.Invokes a transform function on each element of a sequence and returns the maximum nullable Int32 value.

Max<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int64>>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int64>>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int64>>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int64>>)

시퀀스의 각 요소에 대해 변형 함수를 호출하고 최대 nullable Int64 값을 반환합니다.Invokes a transform function on each element of a sequence and returns the maximum nullable Int64 value.

Max<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Single>>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Single>>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Single>>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Single>>)

시퀀스의 각 요소에 대해 변형 함수를 호출하고 최대 nullable Single 값을 반환합니다.Invokes a transform function on each element of a sequence and returns the maximum nullable Single value.

Max<TSource>(IEnumerable<TSource>, Func<TSource,Single>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Single>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Single>) Max<TSource>(IEnumerable<TSource>, Func<TSource,Single>)

시퀀스의 각 요소에 대해 변형 함수를 호출하고 최대 Single 값을 반환합니다.Invokes a transform function on each element of a sequence and returns the maximum Single value.

Max<TSource,TResult>(IEnumerable<TSource>, Func<TSource,TResult>) Max<TSource,TResult>(IEnumerable<TSource>, Func<TSource,TResult>) Max<TSource,TResult>(IEnumerable<TSource>, Func<TSource,TResult>) Max<TSource,TResult>(IEnumerable<TSource>, Func<TSource,TResult>)

제네릭 시퀀스의 각 요소에 대해 변형 함수를 호출하고 최대 결과 값을 반환합니다.Invokes a transform function on each element of a generic sequence and returns the maximum resulting value.

Min(IEnumerable<Decimal>) Min(IEnumerable<Decimal>) Min(IEnumerable<Decimal>) Min(IEnumerable<Decimal>)

Decimal 값 시퀀스의 최소값을 반환합니다.Returns the minimum value in a sequence of Decimal values.

Min(IEnumerable<Double>) Min(IEnumerable<Double>) Min(IEnumerable<Double>) Min(IEnumerable<Double>)

Double 값 시퀀스의 최소값을 반환합니다.Returns the minimum value in a sequence of Double values.

Min(IEnumerable<Int32>) Min(IEnumerable<Int32>) Min(IEnumerable<Int32>) Min(IEnumerable<Int32>)

Int32 값 시퀀스의 최소값을 반환합니다.Returns the minimum value in a sequence of Int32 values.

Min(IEnumerable<Int64>) Min(IEnumerable<Int64>) Min(IEnumerable<Int64>) Min(IEnumerable<Int64>)

Int64 값 시퀀스의 최소값을 반환합니다.Returns the minimum value in a sequence of Int64 values.

Min(IEnumerable<Nullable<Decimal>>) Min(IEnumerable<Nullable<Decimal>>) Min(IEnumerable<Nullable<Decimal>>) Min(IEnumerable<Nullable<Decimal>>)

nullable Decimal 값 시퀀스의 최소값을 반환합니다.Returns the minimum value in a sequence of nullable Decimal values.

Min(IEnumerable<Nullable<Double>>) Min(IEnumerable<Nullable<Double>>) Min(IEnumerable<Nullable<Double>>) Min(IEnumerable<Nullable<Double>>)

nullable Double 값 시퀀스의 최소값을 반환합니다.Returns the minimum value in a sequence of nullable Double values.

Min(IEnumerable<Nullable<Int32>>) Min(IEnumerable<Nullable<Int32>>) Min(IEnumerable<Nullable<Int32>>) Min(IEnumerable<Nullable<Int32>>)

nullable Int32 값 시퀀스의 최소값을 반환합니다.Returns the minimum value in a sequence of nullable Int32 values.

Min(IEnumerable<Nullable<Int64>>) Min(IEnumerable<Nullable<Int64>>) Min(IEnumerable<Nullable<Int64>>) Min(IEnumerable<Nullable<Int64>>)

nullable Int64 값 시퀀스의 최소값을 반환합니다.Returns the minimum value in a sequence of nullable Int64 values.

Min(IEnumerable<Nullable<Single>>) Min(IEnumerable<Nullable<Single>>) Min(IEnumerable<Nullable<Single>>) Min(IEnumerable<Nullable<Single>>)

nullable Single 값 시퀀스의 최소값을 반환합니다.Returns the minimum value in a sequence of nullable Single values.

Min(IEnumerable<Single>) Min(IEnumerable<Single>) Min(IEnumerable<Single>) Min(IEnumerable<Single>)

Single 값 시퀀스의 최소값을 반환합니다.Returns the minimum value in a sequence of Single values.

Min<TSource>(IEnumerable<TSource>) Min<TSource>(IEnumerable<TSource>) Min<TSource>(IEnumerable<TSource>) Min<TSource>(IEnumerable<TSource>)

제네릭 시퀀스의 최소값을 반환합니다.Returns the minimum value in a generic sequence.

Min<TSource>(IEnumerable<TSource>, Func<TSource,Decimal>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Decimal>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Decimal>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Decimal>)

시퀀스의 각 요소에 대해 변형 함수를 호출하고 최소 Decimal 값을 반환합니다.Invokes a transform function on each element of a sequence and returns the minimum Decimal value.

Min<TSource>(IEnumerable<TSource>, Func<TSource,Double>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Double>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Double>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Double>)

시퀀스의 각 요소에 대해 변형 함수를 호출하고 최소 Double 값을 반환합니다.Invokes a transform function on each element of a sequence and returns the minimum Double value.

Min<TSource>(IEnumerable<TSource>, Func<TSource,Int32>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Int32>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Int32>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Int32>)

시퀀스의 각 요소에 대해 변형 함수를 호출하고 최소 Int32 값을 반환합니다.Invokes a transform function on each element of a sequence and returns the minimum Int32 value.

Min<TSource>(IEnumerable<TSource>, Func<TSource,Int64>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Int64>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Int64>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Int64>)

시퀀스의 각 요소에 대해 변형 함수를 호출하고 최소 Int64 값을 반환합니다.Invokes a transform function on each element of a sequence and returns the minimum Int64 value.

Min<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Decimal>>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Decimal>>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Decimal>>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Decimal>>)

시퀀스의 각 요소에 대해 변형 함수를 호출하고 최소 nullable Decimal 값을 반환합니다.Invokes a transform function on each element of a sequence and returns the minimum nullable Decimal value.

Min<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Double>>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Double>>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Double>>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Double>>)

시퀀스의 각 요소에 대해 변형 함수를 호출하고 최소 nullable Double 값을 반환합니다.Invokes a transform function on each element of a sequence and returns the minimum nullable Double value.

Min<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int32>>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int32>>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int32>>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int32>>)

시퀀스의 각 요소에 대해 변형 함수를 호출하고 최소 nullable Int32 값을 반환합니다.Invokes a transform function on each element of a sequence and returns the minimum nullable Int32 value.

Min<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int64>>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int64>>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int64>>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int64>>)

시퀀스의 각 요소에 대해 변형 함수를 호출하고 최소 nullable Int64 값을 반환합니다.Invokes a transform function on each element of a sequence and returns the minimum nullable Int64 value.

Min<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Single>>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Single>>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Single>>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Single>>)

시퀀스의 각 요소에 대해 변형 함수를 호출하고 최소 nullable Single 값을 반환합니다.Invokes a transform function on each element of a sequence and returns the minimum nullable Single value.

Min<TSource>(IEnumerable<TSource>, Func<TSource,Single>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Single>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Single>) Min<TSource>(IEnumerable<TSource>, Func<TSource,Single>)

시퀀스의 각 요소에 대해 변형 함수를 호출하고 최소 Single 값을 반환합니다.Invokes a transform function on each element of a sequence and returns the minimum Single value.

Min<TSource,TResult>(IEnumerable<TSource>, Func<TSource,TResult>) Min<TSource,TResult>(IEnumerable<TSource>, Func<TSource,TResult>) Min<TSource,TResult>(IEnumerable<TSource>, Func<TSource,TResult>) Min<TSource,TResult>(IEnumerable<TSource>, Func<TSource,TResult>)

제네릭 시퀀스의 각 요소에 대해 변형 함수를 호출하고 최소 결과 값을 반환합니다.Invokes a transform function on each element of a generic sequence and returns the minimum resulting value.

OfType<TResult>(IEnumerable) OfType<TResult>(IEnumerable) OfType<TResult>(IEnumerable) OfType<TResult>(IEnumerable)

지정된 형식에 따라 IEnumerable의 요소를 필터링합니다.Filters the elements of an IEnumerable based on a specified type.

OrderBy<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>) OrderBy<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>) OrderBy<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>) OrderBy<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>)

시퀀스의 요소를 키에 따라 오름차순으로 정렬합니다.Sorts the elements of a sequence in ascending order according to a key.

OrderBy<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>, IComparer<TKey>) OrderBy<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>, IComparer<TKey>) OrderBy<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>, IComparer<TKey>) OrderBy<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>, IComparer<TKey>)

지정된 비교자를 사용하여 시퀀스의 요소를 오름차순으로 정렬합니다.Sorts the elements of a sequence in ascending order by using a specified comparer.

OrderByDescending<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>) OrderByDescending<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>) OrderByDescending<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>) OrderByDescending<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>)

시퀀스의 요소를 키에 따라 내림차순으로 정렬합니다.Sorts the elements of a sequence in descending order according to a key.

OrderByDescending<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>, IComparer<TKey>) OrderByDescending<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>, IComparer<TKey>) OrderByDescending<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>, IComparer<TKey>) OrderByDescending<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>, IComparer<TKey>)

지정된 비교자를 사용하여 시퀀스의 요소를 내림차순으로 정렬합니다.Sorts the elements of a sequence in descending order by using a specified comparer.

Prepend<TSource>(IEnumerable<TSource>, TSource) Prepend<TSource>(IEnumerable<TSource>, TSource) Prepend<TSource>(IEnumerable<TSource>, TSource) Prepend<TSource>(IEnumerable<TSource>, TSource)

시퀀스의 시작 부분에 값을 추가합니다.Adds a value to the beginning of the sequence.

Reverse<TSource>(IEnumerable<TSource>) Reverse<TSource>(IEnumerable<TSource>) Reverse<TSource>(IEnumerable<TSource>) Reverse<TSource>(IEnumerable<TSource>)

시퀀스의 요소 순서를 반전합니다.Inverts the order of the elements in a sequence.

Select<TSource,TResult>(IEnumerable<TSource>, Func<TSource,TResult>) Select<TSource,TResult>(IEnumerable<TSource>, Func<TSource,TResult>) Select<TSource,TResult>(IEnumerable<TSource>, Func<TSource,TResult>) Select<TSource,TResult>(IEnumerable<TSource>, Func<TSource,TResult>)

시퀀스의 각 요소를 새 폼에 투영합니다.Projects each element of a sequence into a new form.

Select<TSource,TResult>(IEnumerable<TSource>, Func<TSource,Int32,TResult>) Select<TSource,TResult>(IEnumerable<TSource>, Func<TSource,Int32,TResult>) Select<TSource,TResult>(IEnumerable<TSource>, Func<TSource,Int32,TResult>) Select<TSource,TResult>(IEnumerable<TSource>, Func<TSource,Int32,TResult>)

요소의 인덱스를 통합하여 시퀀스의 각 요소를 새 폼에 투영합니다.Projects each element of a sequence into a new form by incorporating the element's index.

SelectMany<TSource,TResult>(IEnumerable<TSource>, Func<TSource,IEnumerable<TResult>>) SelectMany<TSource,TResult>(IEnumerable<TSource>, Func<TSource,IEnumerable<TResult>>) SelectMany<TSource,TResult>(IEnumerable<TSource>, Func<TSource,IEnumerable<TResult>>) SelectMany<TSource,TResult>(IEnumerable<TSource>, Func<TSource,IEnumerable<TResult>>)

시퀀스의 각 요소를 IEnumerable<T>에 투영하고 결과 시퀀스를 단일 시퀀스로 평면화합니다.Projects each element of a sequence to an IEnumerable<T> and flattens the resulting sequences into one sequence.

SelectMany<TSource,TResult>(IEnumerable<TSource>, Func<TSource,Int32,IEnumerable<TResult>>) SelectMany<TSource,TResult>(IEnumerable<TSource>, Func<TSource,Int32,IEnumerable<TResult>>) SelectMany<TSource,TResult>(IEnumerable<TSource>, Func<TSource,Int32,IEnumerable<TResult>>) SelectMany<TSource,TResult>(IEnumerable<TSource>, Func<TSource,Int32,IEnumerable<TResult>>)

시퀀스의 각 요소를 IEnumerable<T>에 투영하고 결과 시퀀스를 단일 시퀀스로 평면화합니다.Projects each element of a sequence to an IEnumerable<T>, and flattens the resulting sequences into one sequence. 각 소스 요소의 인덱스는 해당 요소의 투영된 폼에 사용됩니다.The index of each source element is used in the projected form of that element.

SelectMany<TSource,TCollection,TResult>(IEnumerable<TSource>, Func<TSource,IEnumerable<TCollection>>, Func<TSource,TCollection,TResult>) SelectMany<TSource,TCollection,TResult>(IEnumerable<TSource>, Func<TSource,IEnumerable<TCollection>>, Func<TSource,TCollection,TResult>) SelectMany<TSource,TCollection,TResult>(IEnumerable<TSource>, Func<TSource,IEnumerable<TCollection>>, Func<TSource,TCollection,TResult>) SelectMany<TSource,TCollection,TResult>(IEnumerable<TSource>, Func<TSource,IEnumerable<TCollection>>, Func<TSource,TCollection,TResult>)

시퀀스의 각 요소를 IEnumerable<T>로 투영하고, 결과 시퀀스를 단일 시퀀스로 평면화한 다음 포함된 각 요소에 대해 결과 선택기 함수를 호출합니다.Projects each element of a sequence to an IEnumerable<T>, flattens the resulting sequences into one sequence, and invokes a result selector function on each element therein.

SelectMany<TSource,TCollection,TResult>(IEnumerable<TSource>, Func<TSource,Int32,IEnumerable<TCollection>>, Func<TSource,TCollection,TResult>) SelectMany<TSource,TCollection,TResult>(IEnumerable<TSource>, Func<TSource,Int32,IEnumerable<TCollection>>, Func<TSource,TCollection,TResult>) SelectMany<TSource,TCollection,TResult>(IEnumerable<TSource>, Func<TSource,Int32,IEnumerable<TCollection>>, Func<TSource,TCollection,TResult>) SelectMany<TSource,TCollection,TResult>(IEnumerable<TSource>, Func<TSource,Int32,IEnumerable<TCollection>>, Func<TSource,TCollection,TResult>)

시퀀스의 각 요소를 IEnumerable<T>로 투영하고, 결과 시퀀스를 단일 시퀀스로 평면화한 다음 포함된 각 요소에 대해 결과 선택기 함수를 호출합니다.Projects each element of a sequence to an IEnumerable<T>, flattens the resulting sequences into one sequence, and invokes a result selector function on each element therein. 각 소스 요소의 인덱스는 해당 요소의 투영된 중간 폼에 사용됩니다.The index of each source element is used in the intermediate projected form of that element.

SequenceEqual<TSource>(IEnumerable<TSource>, IEnumerable<TSource>) SequenceEqual<TSource>(IEnumerable<TSource>, IEnumerable<TSource>) SequenceEqual<TSource>(IEnumerable<TSource>, IEnumerable<TSource>) SequenceEqual<TSource>(IEnumerable<TSource>, IEnumerable<TSource>)

해당 형식에 대한 기본 같음 비교자를 통해 요소를 비교하여 두 시퀀스가 서로 같은지 확인합니다.Determines whether two sequences are equal by comparing the elements by using the default equality comparer for their type.

SequenceEqual<TSource>(IEnumerable<TSource>, IEnumerable<TSource>, IEqualityComparer<TSource>) SequenceEqual<TSource>(IEnumerable<TSource>, IEnumerable<TSource>, IEqualityComparer<TSource>) SequenceEqual<TSource>(IEnumerable<TSource>, IEnumerable<TSource>, IEqualityComparer<TSource>) SequenceEqual<TSource>(IEnumerable<TSource>, IEnumerable<TSource>, IEqualityComparer<TSource>)

지정된 IEqualityComparer<T>를 통해 요소를 비교하여 두 시퀀스가 서로 같은지 확인합니다.Determines whether two sequences are equal by comparing their elements by using a specified IEqualityComparer<T>.

Single<TSource>(IEnumerable<TSource>) Single<TSource>(IEnumerable<TSource>) Single<TSource>(IEnumerable<TSource>) Single<TSource>(IEnumerable<TSource>)

시퀀스의 유일한 요소를 반환하고, 시퀀스에 요소가 정확히 하나 들어 있지 않으면 예외를 throw합니다.Returns the only element of a sequence, and throws an exception if there is not exactly one element in the sequence.

Single<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) Single<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) Single<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) Single<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>)

시퀀스에서 지정된 조건에 맞는 유일한 요소를 반환하고, 이러한 요소가 둘 이상 있으면 예외를 throw합니다.Returns the only element of a sequence that satisfies a specified condition, and throws an exception if more than one such element exists.

SingleOrDefault<TSource>(IEnumerable<TSource>) SingleOrDefault<TSource>(IEnumerable<TSource>) SingleOrDefault<TSource>(IEnumerable<TSource>) SingleOrDefault<TSource>(IEnumerable<TSource>)

시퀀스의 유일한 요소를 반환하거나 시퀀스가 비어 있으면 기본값을 반환합니다. 시퀀스에 요소가 둘 이상 있으면 예외를 throw합니다.Returns the only element of a sequence, or a default value if the sequence is empty; this method throws an exception if there is more than one element in the sequence.

SingleOrDefault<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) SingleOrDefault<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) SingleOrDefault<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) SingleOrDefault<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>)

시퀀스에서 지정된 조건에 맞는 유일한 요소를 반환하거나 이러한 요소가 없으면 기본값을 반환합니다. 조건에 맞는 요소가 둘 이상 있으면 예외를 throw합니다.Returns the only element of a sequence that satisfies a specified condition or a default value if no such element exists; this method throws an exception if more than one element satisfies the condition.

Skip<TSource>(IEnumerable<TSource>, Int32) Skip<TSource>(IEnumerable<TSource>, Int32) Skip<TSource>(IEnumerable<TSource>, Int32) Skip<TSource>(IEnumerable<TSource>, Int32)

시퀀스에서 지정된 수의 요소를 건너뛴 다음 나머지 요소를 반환합니다.Bypasses a specified number of elements in a sequence and then returns the remaining elements.

SkipLast<TSource>(IEnumerable<TSource>, Int32) SkipLast<TSource>(IEnumerable<TSource>, Int32) SkipLast<TSource>(IEnumerable<TSource>, Int32) SkipLast<TSource>(IEnumerable<TSource>, Int32)
SkipWhile<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) SkipWhile<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) SkipWhile<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) SkipWhile<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>)

지정된 조건이 true이면 시퀀스에 있는 요소를 무시하고 나머지 요소를 반환합니다.Bypasses elements in a sequence as long as a specified condition is true and then returns the remaining elements.

SkipWhile<TSource>(IEnumerable<TSource>, Func<TSource,Int32,Boolean>) SkipWhile<TSource>(IEnumerable<TSource>, Func<TSource,Int32,Boolean>) SkipWhile<TSource>(IEnumerable<TSource>, Func<TSource,Int32,Boolean>) SkipWhile<TSource>(IEnumerable<TSource>, Func<TSource,Int32,Boolean>)

지정된 조건이 true이면 시퀀스에 있는 요소를 무시하고 나머지 요소를 반환합니다.Bypasses elements in a sequence as long as a specified condition is true and then returns the remaining elements. 조건자 함수의 논리에 요소의 인덱스가 사용됩니다.The element's index is used in the logic of the predicate function.

Sum(IEnumerable<Decimal>) Sum(IEnumerable<Decimal>) Sum(IEnumerable<Decimal>) Sum(IEnumerable<Decimal>)

Decimal 값 시퀀스의 합을 계산합니다.Computes the sum of a sequence of Decimal values.

Sum(IEnumerable<Double>) Sum(IEnumerable<Double>) Sum(IEnumerable<Double>) Sum(IEnumerable<Double>)

Double 값 시퀀스의 합을 계산합니다.Computes the sum of a sequence of Double values.

Sum(IEnumerable<Int32>) Sum(IEnumerable<Int32>) Sum(IEnumerable<Int32>) Sum(IEnumerable<Int32>)

Int32 값 시퀀스의 합을 계산합니다.Computes the sum of a sequence of Int32 values.

Sum(IEnumerable<Int64>) Sum(IEnumerable<Int64>) Sum(IEnumerable<Int64>) Sum(IEnumerable<Int64>)

Int64 값 시퀀스의 합을 계산합니다.Computes the sum of a sequence of Int64 values.

Sum(IEnumerable<Nullable<Decimal>>) Sum(IEnumerable<Nullable<Decimal>>) Sum(IEnumerable<Nullable<Decimal>>) Sum(IEnumerable<Nullable<Decimal>>)

nullable Decimal 값 시퀀스의 합을 계산합니다.Computes the sum of a sequence of nullable Decimal values.

Sum(IEnumerable<Nullable<Double>>) Sum(IEnumerable<Nullable<Double>>) Sum(IEnumerable<Nullable<Double>>) Sum(IEnumerable<Nullable<Double>>)

nullable Double 값 시퀀스의 합을 계산합니다.Computes the sum of a sequence of nullable Double values.

Sum(IEnumerable<Nullable<Int32>>) Sum(IEnumerable<Nullable<Int32>>) Sum(IEnumerable<Nullable<Int32>>) Sum(IEnumerable<Nullable<Int32>>)

nullable Int32 값 시퀀스의 합을 계산합니다.Computes the sum of a sequence of nullable Int32 values.

Sum(IEnumerable<Nullable<Int64>>) Sum(IEnumerable<Nullable<Int64>>) Sum(IEnumerable<Nullable<Int64>>) Sum(IEnumerable<Nullable<Int64>>)

nullable Int64 값 시퀀스의 합을 계산합니다.Computes the sum of a sequence of nullable Int64 values.

Sum(IEnumerable<Nullable<Single>>) Sum(IEnumerable<Nullable<Single>>) Sum(IEnumerable<Nullable<Single>>) Sum(IEnumerable<Nullable<Single>>)

nullable Single 값 시퀀스의 합을 계산합니다.Computes the sum of a sequence of nullable Single values.

Sum(IEnumerable<Single>) Sum(IEnumerable<Single>) Sum(IEnumerable<Single>) Sum(IEnumerable<Single>)

Single 값 시퀀스의 합을 계산합니다.Computes the sum of a sequence of Single values.

Sum<TSource>(IEnumerable<TSource>, Func<TSource,Decimal>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Decimal>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Decimal>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Decimal>)

입력 시퀀스의 각 요소에 대해 변형 함수를 호출하여 가져온 Decimal 값 시퀀스의 합을 계산합니다.Computes the sum of the sequence of Decimal values that are obtained by invoking a transform function on each element of the input sequence.

Sum<TSource>(IEnumerable<TSource>, Func<TSource,Double>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Double>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Double>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Double>)

입력 시퀀스의 각 요소에 대해 변형 함수를 호출하여 가져온 Double 값 시퀀스의 합을 계산합니다.Computes the sum of the sequence of Double values that are obtained by invoking a transform function on each element of the input sequence.

Sum<TSource>(IEnumerable<TSource>, Func<TSource,Int32>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Int32>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Int32>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Int32>)

입력 시퀀스의 각 요소에 대해 변형 함수를 호출하여 가져온 Int32 값 시퀀스의 합을 계산합니다.Computes the sum of the sequence of Int32 values that are obtained by invoking a transform function on each element of the input sequence.

Sum<TSource>(IEnumerable<TSource>, Func<TSource,Int64>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Int64>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Int64>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Int64>)

입력 시퀀스의 각 요소에 대해 변형 함수를 호출하여 가져온 Int64 값 시퀀스의 합을 계산합니다.Computes the sum of the sequence of Int64 values that are obtained by invoking a transform function on each element of the input sequence.

Sum<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Decimal>>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Decimal>>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Decimal>>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Decimal>>)

입력 시퀀스의 각 요소에 대해 변형 함수를 호출하여 가져온 nullable Decimal 값 시퀀스의 합을 계산합니다.Computes the sum of the sequence of nullable Decimal values that are obtained by invoking a transform function on each element of the input sequence.

Sum<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Double>>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Double>>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Double>>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Double>>)

입력 시퀀스의 각 요소에 대해 변형 함수를 호출하여 가져온 nullable Double 값 시퀀스의 합을 계산합니다.Computes the sum of the sequence of nullable Double values that are obtained by invoking a transform function on each element of the input sequence.

Sum<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int32>>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int32>>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int32>>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int32>>)

입력 시퀀스의 각 요소에 대해 변형 함수를 호출하여 가져온 nullable Int32 값 시퀀스의 합을 계산합니다.Computes the sum of the sequence of nullable Int32 values that are obtained by invoking a transform function on each element of the input sequence.

Sum<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int64>>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int64>>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int64>>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Int64>>)

입력 시퀀스의 각 요소에 대해 변형 함수를 호출하여 가져온 nullable Int64 값 시퀀스의 합을 계산합니다.Computes the sum of the sequence of nullable Int64 values that are obtained by invoking a transform function on each element of the input sequence.

Sum<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Single>>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Single>>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Single>>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Nullable<Single>>)

입력 시퀀스의 각 요소에 대해 변형 함수를 호출하여 가져온 nullable Single 값 시퀀스의 합을 계산합니다.Computes the sum of the sequence of nullable Single values that are obtained by invoking a transform function on each element of the input sequence.

Sum<TSource>(IEnumerable<TSource>, Func<TSource,Single>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Single>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Single>) Sum<TSource>(IEnumerable<TSource>, Func<TSource,Single>)

입력 시퀀스의 각 요소에 대해 변형 함수를 호출하여 가져온 Single 값 시퀀스의 합을 계산합니다.Computes the sum of the sequence of Single values that are obtained by invoking a transform function on each element of the input sequence.

Take<TSource>(IEnumerable<TSource>, Int32) Take<TSource>(IEnumerable<TSource>, Int32) Take<TSource>(IEnumerable<TSource>, Int32) Take<TSource>(IEnumerable<TSource>, Int32)

시퀀스 시작 위치에서 지정된 수의 연속 요소를 반환합니다.Returns a specified number of contiguous elements from the start of a sequence.

TakeLast<TSource>(IEnumerable<TSource>, Int32) TakeLast<TSource>(IEnumerable<TSource>, Int32) TakeLast<TSource>(IEnumerable<TSource>, Int32) TakeLast<TSource>(IEnumerable<TSource>, Int32)
TakeWhile<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) TakeWhile<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) TakeWhile<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) TakeWhile<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>)

지정된 조건이 true인 동안 시퀀스에서 요소를 반환합니다.Returns elements from a sequence as long as a specified condition is true.

TakeWhile<TSource>(IEnumerable<TSource>, Func<TSource,Int32,Boolean>) TakeWhile<TSource>(IEnumerable<TSource>, Func<TSource,Int32,Boolean>) TakeWhile<TSource>(IEnumerable<TSource>, Func<TSource,Int32,Boolean>) TakeWhile<TSource>(IEnumerable<TSource>, Func<TSource,Int32,Boolean>)

지정된 조건이 true인 동안 시퀀스에서 요소를 반환합니다.Returns elements from a sequence as long as a specified condition is true. 조건자 함수의 논리에 요소의 인덱스가 사용됩니다.The element's index is used in the logic of the predicate function.

ToArray<TSource>(IEnumerable<TSource>) ToArray<TSource>(IEnumerable<TSource>) ToArray<TSource>(IEnumerable<TSource>) ToArray<TSource>(IEnumerable<TSource>)

IEnumerable<T>을 사용하여 배열을 만듭니다.Creates an array from a IEnumerable<T>.

ToDictionary<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>) ToDictionary<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>) ToDictionary<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>) ToDictionary<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>)

지정된 키 선택기 함수에 따라 Dictionary<TKey,TValue>을 사용하여 IEnumerable<T>를 만듭니다.Creates a Dictionary<TKey,TValue> from an IEnumerable<T> according to a specified key selector function.

ToDictionary<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>, IEqualityComparer<TKey>) ToDictionary<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>, IEqualityComparer<TKey>) ToDictionary<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>, IEqualityComparer<TKey>) ToDictionary<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>, IEqualityComparer<TKey>)

지정된 키 선택기 함수와 키 비교자에 따라 Dictionary<TKey,TValue>을 사용하여 IEnumerable<T>를 만듭니다.Creates a Dictionary<TKey,TValue> from an IEnumerable<T> according to a specified key selector function and key comparer.

ToDictionary<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>) ToDictionary<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>) ToDictionary<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>) ToDictionary<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>)

지정된 키 선택기와 요소 선택기 함수에 따라 Dictionary<TKey,TValue>을 사용하여 IEnumerable<T>를 만듭니다.Creates a Dictionary<TKey,TValue> from an IEnumerable<T> according to specified key selector and element selector functions.

ToDictionary<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>, IEqualityComparer<TKey>) ToDictionary<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>, IEqualityComparer<TKey>) ToDictionary<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>, IEqualityComparer<TKey>) ToDictionary<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>, IEqualityComparer<TKey>)

지정된 키 선택기 함수, 비교자 및 요소 선택기 함수에 따라 Dictionary<TKey,TValue>을 사용하여 IEnumerable<T>를 만듭니다.Creates a Dictionary<TKey,TValue> from an IEnumerable<T> according to a specified key selector function, a comparer, and an element selector function.

ToHashSet<TSource>(IEnumerable<TSource>) ToHashSet<TSource>(IEnumerable<TSource>) ToHashSet<TSource>(IEnumerable<TSource>) ToHashSet<TSource>(IEnumerable<TSource>)

IEnumerable<T>에서 HashSet<T>을 만듭니다.Creates a HashSet<T> from an IEnumerable<T>.

ToHashSet<TSource>(IEnumerable<TSource>, IEqualityComparer<TSource>) ToHashSet<TSource>(IEnumerable<TSource>, IEqualityComparer<TSource>) ToHashSet<TSource>(IEnumerable<TSource>, IEqualityComparer<TSource>) ToHashSet<TSource>(IEnumerable<TSource>, IEqualityComparer<TSource>)

comparer를 사용하여 키를 비교하는 IEnumerable<T>에서 HashSet<T>를 생성합니다.Creates a HashSet<T> from an IEnumerable<T> using the comparer to compare keys

ToList<TSource>(IEnumerable<TSource>) ToList<TSource>(IEnumerable<TSource>) ToList<TSource>(IEnumerable<TSource>) ToList<TSource>(IEnumerable<TSource>)

IEnumerable<T>에서 List<T>을 만듭니다.Creates a List<T> from an IEnumerable<T>.

ToLookup<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>) ToLookup<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>) ToLookup<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>) ToLookup<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>)

지정된 키 선택기 함수에 따라 Lookup<TKey,TElement>을 사용하여 IEnumerable<T>를 만듭니다.Creates a Lookup<TKey,TElement> from an IEnumerable<T> according to a specified key selector function.

ToLookup<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>, IEqualityComparer<TKey>) ToLookup<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>, IEqualityComparer<TKey>) ToLookup<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>, IEqualityComparer<TKey>) ToLookup<TSource,TKey>(IEnumerable<TSource>, Func<TSource,TKey>, IEqualityComparer<TKey>)

지정된 키 선택기 함수와 키 비교자에 따라 Lookup<TKey,TElement>을 사용하여 IEnumerable<T>를 만듭니다.Creates a Lookup<TKey,TElement> from an IEnumerable<T> according to a specified key selector function and key comparer.

ToLookup<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>) ToLookup<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>) ToLookup<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>) ToLookup<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>)

지정된 키 선택기와 요소 선택기 함수에 따라 Lookup<TKey,TElement>을 사용하여 IEnumerable<T>를 만듭니다.Creates a Lookup<TKey,TElement> from an IEnumerable<T> according to specified key selector and element selector functions.

ToLookup<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>, IEqualityComparer<TKey>) ToLookup<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>, IEqualityComparer<TKey>) ToLookup<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>, IEqualityComparer<TKey>) ToLookup<TSource,TKey,TElement>(IEnumerable<TSource>, Func<TSource,TKey>, Func<TSource,TElement>, IEqualityComparer<TKey>)

지정된 키 선택기 함수, 비교자 및 요소 선택기 함수에 따라 Lookup<TKey,TElement>을 사용하여 IEnumerable<T>을 만듭니다.Creates a Lookup<TKey,TElement> from an IEnumerable<T> according to a specified key selector function, a comparer and an element selector function.

Union<TSource>(IEnumerable<TSource>, IEnumerable<TSource>) Union<TSource>(IEnumerable<TSource>, IEnumerable<TSource>) Union<TSource>(IEnumerable<TSource>, IEnumerable<TSource>) Union<TSource>(IEnumerable<TSource>, IEnumerable<TSource>)

기본 같음 비교자를 사용하여 두 시퀀스의 합집합을 구합니다.Produces the set union of two sequences by using the default equality comparer.

Union<TSource>(IEnumerable<TSource>, IEnumerable<TSource>, IEqualityComparer<TSource>) Union<TSource>(IEnumerable<TSource>, IEnumerable<TSource>, IEqualityComparer<TSource>) Union<TSource>(IEnumerable<TSource>, IEnumerable<TSource>, IEqualityComparer<TSource>) Union<TSource>(IEnumerable<TSource>, IEnumerable<TSource>, IEqualityComparer<TSource>)

지정된 IEqualityComparer<T>를 사용하여 두 시퀀스의 합집합을 구합니다.Produces the set union of two sequences by using a specified IEqualityComparer<T>.

Where<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) Where<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) Where<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>) Where<TSource>(IEnumerable<TSource>, Func<TSource,Boolean>)

조건자에 따라 값의 시퀀스를 필터링합니다.Filters a sequence of values based on a predicate.

Where<TSource>(IEnumerable<TSource>, Func<TSource,Int32,Boolean>) Where<TSource>(IEnumerable<TSource>, Func<TSource,Int32,Boolean>) Where<TSource>(IEnumerable<TSource>, Func<TSource,Int32,Boolean>) Where<TSource>(IEnumerable<TSource>, Func<TSource,Int32,Boolean>)

조건자에 따라 값의 시퀀스를 필터링합니다.Filters a sequence of values based on a predicate. 조건자 함수의 논리에 각 요소의 인덱스가 사용됩니다.Each element's index is used in the logic of the predicate function.

Zip<TFirst,TSecond,TResult>(IEnumerable<TFirst>, IEnumerable<TSecond>, Func<TFirst,TSecond,TResult>) Zip<TFirst,TSecond,TResult>(IEnumerable<TFirst>, IEnumerable<TSecond>, Func<TFirst,TSecond,TResult>) Zip<TFirst,TSecond,TResult>(IEnumerable<TFirst>, IEnumerable<TSecond>, Func<TFirst,TSecond,TResult>) Zip<TFirst,TSecond,TResult>(IEnumerable<TFirst>, IEnumerable<TSecond>, Func<TFirst,TSecond,TResult>)

지정된 함수를 두 시퀀스의 해당 요소에 적용하여 결과 시퀀스를 만듭니다.Applies a specified function to the corresponding elements of two sequences, producing a sequence of the results.

AsParallel(IEnumerable) AsParallel(IEnumerable) AsParallel(IEnumerable) AsParallel(IEnumerable)

쿼리를 병렬화할 수 있도록 합니다.Enables parallelization of a query.

AsParallel<TSource>(IEnumerable<TSource>) AsParallel<TSource>(IEnumerable<TSource>) AsParallel<TSource>(IEnumerable<TSource>) AsParallel<TSource>(IEnumerable<TSource>)

쿼리를 병렬화할 수 있도록 합니다.Enables parallelization of a query.

AsQueryable(IEnumerable) AsQueryable(IEnumerable) AsQueryable(IEnumerable) AsQueryable(IEnumerable)

IEnumerableIQueryable로 변환합니다.Converts an IEnumerable to an IQueryable.

AsQueryable<TElement>(IEnumerable<TElement>) AsQueryable<TElement>(IEnumerable<TElement>) AsQueryable<TElement>(IEnumerable<TElement>) AsQueryable<TElement>(IEnumerable<TElement>)

제네릭 IEnumerable<T>을 제네릭 IQueryable<T>로 변환합니다.Converts a generic IEnumerable<T> to a generic IQueryable<T>.

Ancestors<T>(IEnumerable<T>) Ancestors<T>(IEnumerable<T>) Ancestors<T>(IEnumerable<T>) Ancestors<T>(IEnumerable<T>)

소스 컬렉션에 있는 모든 노드의 상위 항목이 들어 있는 요소 컬렉션을 반환합니다.Returns a collection of elements that contains the ancestors of every node in the source collection.

Ancestors<T>(IEnumerable<T>, XName) Ancestors<T>(IEnumerable<T>, XName) Ancestors<T>(IEnumerable<T>, XName) Ancestors<T>(IEnumerable<T>, XName)

소스 컬렉션에 있는 모든 노드의 상위 항목이 들어 있는 필터링된 요소 컬렉션을 반환합니다.Returns a filtered collection of elements that contains the ancestors of every node in the source collection. 일치하는 XName이 있는 요소만 컬렉션에 포함됩니다.Only elements that have a matching XName are included in the collection.

AncestorsAndSelf(IEnumerable<XElement>) AncestorsAndSelf(IEnumerable<XElement>) AncestorsAndSelf(IEnumerable<XElement>) AncestorsAndSelf(IEnumerable<XElement>)

소스 컬렉션의 모든 요소와 소스 컬렉션에 있는 모든 요소의 상위 항목이 들어 있는 요소 컬렉션을 반환합니다.Returns a collection of elements that contains every element in the source collection, and the ancestors of every element in the source collection.

AncestorsAndSelf(IEnumerable<XElement>, XName) AncestorsAndSelf(IEnumerable<XElement>, XName) AncestorsAndSelf(IEnumerable<XElement>, XName) AncestorsAndSelf(IEnumerable<XElement>, XName)

소스 컬렉션의 모든 요소와 소스 컬렉션에 있는 모든 요소의 상위 항목이 들어 있는 필터링된 요소 컬렉션을 반환합니다.Returns a filtered collection of elements that contains every element in the source collection, and the ancestors of every element in the source collection. 일치하는 XName이 있는 요소만 컬렉션에 포함됩니다.Only elements that have a matching XName are included in the collection.

Attributes(IEnumerable<XElement>) Attributes(IEnumerable<XElement>) Attributes(IEnumerable<XElement>) Attributes(IEnumerable<XElement>)

소스 컬렉션에 있는 모든 요소의 특성 컬렉션을 반환합니다.Returns a collection of the attributes of every element in the source collection.

Attributes(IEnumerable<XElement>, XName) Attributes(IEnumerable<XElement>, XName) Attributes(IEnumerable<XElement>, XName) Attributes(IEnumerable<XElement>, XName)

소스 컬렉션에 있는 모든 요소의 필터링된 특성 컬렉션을 반환합니다.Returns a filtered collection of the attributes of every element in the source collection. 일치하는 XName이 있는 요소만 컬렉션에 포함됩니다.Only elements that have a matching XName are included in the collection.

DescendantNodes<T>(IEnumerable<T>) DescendantNodes<T>(IEnumerable<T>) DescendantNodes<T>(IEnumerable<T>) DescendantNodes<T>(IEnumerable<T>)

소스 컬렉션에 있는 모든 문서 및 요소의 하위 노드 컬렉션을 반환합니다.Returns a collection of the descendant nodes of every document and element in the source collection.

DescendantNodesAndSelf(IEnumerable<XElement>) DescendantNodesAndSelf(IEnumerable<XElement>) DescendantNodesAndSelf(IEnumerable<XElement>) DescendantNodesAndSelf(IEnumerable<XElement>)

소스 컬렉션의 모든 요소와 소스 컬렉션에 있는 모든 요소의 하위 노드가 들어 있는 노드 컬렉션을 반환합니다.Returns a collection of nodes that contains every element in the source collection, and the descendant nodes of every element in the source collection.

Descendants<T>(IEnumerable<T>) Descendants<T>(IEnumerable<T>) Descendants<T>(IEnumerable<T>) Descendants<T>(IEnumerable<T>)

소스 컬렉션에 있는 모든 요소 및 문서의 하위 요소가 들어 있는 요소 컬렉션을 반환합니다.Returns a collection of elements that contains the descendant elements of every element and document in the source collection.

Descendants<T>(IEnumerable<T>, XName) Descendants<T>(IEnumerable<T>, XName) Descendants<T>(IEnumerable<T>, XName) Descendants<T>(IEnumerable<T>, XName)

소스 컬렉션에 있는 모든 요소 및 문서의 하위 요소가 들어 있는 필터링된 요소 컬렉션을 반환합니다.Returns a filtered collection of elements that contains the descendant elements of every element and document in the source collection. 일치하는 XName이 있는 요소만 컬렉션에 포함됩니다.Only elements that have a matching XName are included in the collection.

DescendantsAndSelf(IEnumerable<XElement>) DescendantsAndSelf(IEnumerable<XElement>) DescendantsAndSelf(IEnumerable<XElement>) DescendantsAndSelf(IEnumerable<XElement>)

소스 컬렉션의 모든 요소와 소스 컬렉션에 있는 모든 요소의 하위 요소가 들어 있는 요소 컬렉션을 반환합니다.Returns a collection of elements that contains every element in the source collection, and the descendent elements of every element in the source collection.

DescendantsAndSelf(IEnumerable<XElement>, XName) DescendantsAndSelf(IEnumerable<XElement>, XName) DescendantsAndSelf(IEnumerable<XElement>, XName) DescendantsAndSelf(IEnumerable<XElement>, XName)

소스 컬렉션의 모든 요소와 소스 컬렉션에 있는 모든 요소의 하위 항목이 들어 있는 필터링된 요소 컬렉션을 반환합니다.Returns a filtered collection of elements that contains every element in the source collection, and the descendents of every element in the source collection. 일치하는 XName이 있는 요소만 컬렉션에 포함됩니다.Only elements that have a matching XName are included in the collection.

Elements<T>(IEnumerable<T>) Elements<T>(IEnumerable<T>) Elements<T>(IEnumerable<T>) Elements<T>(IEnumerable<T>)

소스 컬렉션에 있는 모든 요소 및 문서의 자식 요소 컬렉션을 반환합니다.Returns a collection of the child elements of every element and document in the source collection.

Elements<T>(IEnumerable<T>, XName) Elements<T>(IEnumerable<T>, XName) Elements<T>(IEnumerable<T>, XName) Elements<T>(IEnumerable<T>, XName)

소스 컬렉션에 있는 모든 요소 및 문서의 필터링된 자식 요소 컬렉션을 반환합니다.Returns a filtered collection of the child elements of every element and document in the source collection. 일치하는 XName이 있는 요소만 컬렉션에 포함됩니다.Only elements that have a matching XName are included in the collection.

InDocumentOrder<T>(IEnumerable<T>) InDocumentOrder<T>(IEnumerable<T>) InDocumentOrder<T>(IEnumerable<T>) InDocumentOrder<T>(IEnumerable<T>)

소스 컬렉션의 모든 노드가 문서 순으로 정렬되어 들어 있는 노드 컬렉션을 반환합니다.Returns a collection of nodes that contains all nodes in the source collection, sorted in document order.

Nodes<T>(IEnumerable<T>) Nodes<T>(IEnumerable<T>) Nodes<T>(IEnumerable<T>) Nodes<T>(IEnumerable<T>)

소스 컬렉션에 있는 모든 문서 및 요소의 자식 노드 컬렉션을 반환합니다.Returns a collection of the child nodes of every document and element in the source collection.

Remove(IEnumerable<XAttribute>) Remove(IEnumerable<XAttribute>) Remove(IEnumerable<XAttribute>) Remove(IEnumerable<XAttribute>)

부모 요소에서 소스 컬렉션의 모든 특성을 제거합니다.Removes every attribute in the source collection from its parent element.

Remove<T>(IEnumerable<T>) Remove<T>(IEnumerable<T>) Remove<T>(IEnumerable<T>) Remove<T>(IEnumerable<T>)

부모 노드에서 소스 컬렉션의 모든 노드를 제거합니다.Removes every node in the source collection from its parent node.

적용 대상