Semaphore.GetAccessControl 方法

定义

获取已命名的系统信号量的访问控制安全性。Gets the access control security for a named system semaphore.

public:
 System::Security::AccessControl::SemaphoreSecurity ^ GetAccessControl();
public System.Security.AccessControl.SemaphoreSecurity GetAccessControl ();
member this.GetAccessControl : unit -> System.Security.AccessControl.SemaphoreSecurity
Public Function GetAccessControl () As SemaphoreSecurity

返回

一个 SemaphoreSecurity 对象,表示已命名系统信号量的访问控制安全性。A SemaphoreSecurity object that represents the access control security for the named system semaphore.

异常

当前的 Semaphore 对象表示已命名的系统信号灯,且用户不具备 ReadPermissions 权限。The current Semaphore object represents a named system semaphore, and the user does not have ReadPermissions rights.

- 或 --or- 当前的 Semaphore 对象表示已命名的系统信号灯,且 ReadPermissions 权限不开放。The current Semaphore object represents a named system semaphore and was not opened with ReadPermissions rights.

不支持 Windows 98 或 Windows Millennium Edition。Not supported for Windows 98 or Windows Millennium Edition.

示例

下面的代码示例演示具有访问控制安全性的命名信号量的跨进程行为。The following code example demonstrates the cross-process behavior of a named semaphore with access control security. 该示例使用 OpenExisting(String) 方法重载来测试是否存在已命名的信号量。The example uses the OpenExisting(String) method overload to test for the existence of a named semaphore.

如果该信号量不存在,则将创建该信号量的最大计数为2且具有访问控制安全性,这会拒绝当前用户使用该信号量,但会授予读取和更改信号量权限的权限。If the semaphore does not exist, it is created with a maximum count of two and with access control security that denies the current user the right to use the semaphore, but grants the right to read and change permissions on the semaphore.

如果从两个命令窗口运行已编译的示例,第二个副本将在调用 OpenExisting(String) 方法时引发访问冲突异常。If you run the compiled example from two command windows, the second copy will throw an access violation exception on the call to the OpenExisting(String) method. 捕获到异常,该示例使用 OpenExisting(String, SemaphoreRights) 方法重载打开具有读取和更改权限所需权限的信号量。The exception is caught, and the example uses the OpenExisting(String, SemaphoreRights) method overload to open the semaphore with the rights needed to read and change the permissions. 系统信号量的访问控制安全性是使用 GetAccessControl 方法获取的。The access control security for the system semaphore is obtained using the GetAccessControl method.

更改权限后,会打开信号量,其中包含进入和释放所需的权限。After the permissions are changed, the semaphore is opened with the rights required to enter and release. 如果从第三个命令窗口运行已编译的示例,该示例将使用新的权限运行。If you run the compiled example from a third command window, it runs using the new permissions.

#using <System.dll>
using namespace System;
using namespace System::Threading;
using namespace System::Security::AccessControl;
using namespace System::Security::Permissions;

public ref class Example
{
public:
   [SecurityPermissionAttribute(SecurityAction::Demand, Flags = SecurityPermissionFlag::UnmanagedCode)]
   static void main()
   {
      String^ semaphoreName = L"SemaphoreExample5";

      Semaphore^ sem = nullptr;
      bool doesNotExist = false;
      bool unauthorized = false;
      
      // Attempt to open the named semaphore.
      try
      {
         // Open the semaphore with (SemaphoreRights.Synchronize
         // | SemaphoreRights.Modify), to enter and release the
         // named semaphore.
         //
         sem = Semaphore::OpenExisting( semaphoreName );
      }
      catch ( WaitHandleCannotBeOpenedException^ ex ) 
      {
         Console::WriteLine( L"Semaphore does not exist." );
         doesNotExist = true;
      }
      catch ( UnauthorizedAccessException^ ex ) 
      {
         Console::WriteLine( L"Unauthorized access: {0}", ex->Message );
         unauthorized = true;
      }

      // There are three cases: (1) The semaphore does not exist.
      // (2) The semaphore exists, but the current user doesn't
      // have access. (3) The semaphore exists and the user has
      // access.
      //
      if ( doesNotExist )
      {
         // The semaphore does not exist, so create it.
         //
         // The value of this variable is set by the semaphore
         // constructor. It is true if the named system semaphore was
         // created, and false if the named semaphore already existed.
         //
         bool semaphoreWasCreated;
         
         // Create an access control list (ACL) that denies the
         // current user the right to enter or release the
         // semaphore, but allows the right to read and change
         // security information for the semaphore.
         //
         String^ user = String::Concat( Environment::UserDomainName,
            L"\\", Environment::UserName );
         SemaphoreSecurity^ semSec = gcnew SemaphoreSecurity;

         SemaphoreAccessRule^ rule = gcnew SemaphoreAccessRule( user,
            static_cast<SemaphoreRights>(
               SemaphoreRights::Synchronize |
               SemaphoreRights::Modify ),
            AccessControlType::Deny );
         semSec->AddAccessRule( rule );

         rule = gcnew SemaphoreAccessRule( user,
            static_cast<SemaphoreRights>(
               SemaphoreRights::ReadPermissions |
               SemaphoreRights::ChangePermissions ),
            AccessControlType::Allow );
         semSec->AddAccessRule( rule );
         
         // Create a Semaphore object that represents the system
         // semaphore named by the constant 'semaphoreName', with
         // maximum count three, initial count three, and the
         // specified security access. The Boolean value that
         // indicates creation of the underlying system object is
         // placed in semaphoreWasCreated.
         //
         sem = gcnew Semaphore( 3,3,semaphoreName,semaphoreWasCreated,semSec );
         
         // If the named system semaphore was created, it can be
         // used by the current instance of this program, even
         // though the current user is denied access. The current
         // program enters the semaphore. Otherwise, exit the
         // program.
         //
         if ( semaphoreWasCreated )
         {
            Console::WriteLine( L"Created the semaphore." );
         }
         else
         {
            Console::WriteLine( L"Unable to create the semaphore." );
            return;
         }

      }
      else if ( unauthorized )
      {
         // Open the semaphore to read and change the access
         // control security. The access control security defined
         // above allows the current user to do this.
         //
         try
         {
            sem = Semaphore::OpenExisting( semaphoreName,
               static_cast<SemaphoreRights>(
                  SemaphoreRights::ReadPermissions |
                  SemaphoreRights::ChangePermissions ));
            
            // Get the current ACL. This requires
            // SemaphoreRights.ReadPermissions.
            SemaphoreSecurity^ semSec = sem->GetAccessControl();

            String^ user = String::Concat( Environment::UserDomainName,
               L"\\", Environment::UserName );
            
            // First, the rule that denied the current user
            // the right to enter and release the semaphore must
            // be removed.
            SemaphoreAccessRule^ rule = gcnew SemaphoreAccessRule( user,
               static_cast<SemaphoreRights>(
                  SemaphoreRights::Synchronize |
                  SemaphoreRights::Modify ),
               AccessControlType::Deny );
            semSec->RemoveAccessRule( rule );
            
            // Now grant the user the correct rights.
            //
            rule = gcnew SemaphoreAccessRule( user,
               static_cast<SemaphoreRights>(
                  SemaphoreRights::Synchronize |
                  SemaphoreRights::Modify ),
               AccessControlType::Allow );
            semSec->AddAccessRule( rule );
            
            // Update the ACL. This requires
            // SemaphoreRights.ChangePermissions.
            sem->SetAccessControl( semSec );

            Console::WriteLine( L"Updated semaphore security." );
            
            // Open the semaphore with (SemaphoreRights.Synchronize
            // | SemaphoreRights.Modify), the rights required to
            // enter and release the semaphore.
            //
            sem = Semaphore::OpenExisting( semaphoreName );

         }
         catch ( UnauthorizedAccessException^ ex ) 
         {
            Console::WriteLine( L"Unable to change permissions: {0}", ex->Message );
            return;
         }
      }
      
      // Enter the semaphore, and hold it until the program
      // exits.
      //
      try
      {
         sem->WaitOne();
         Console::WriteLine( L"Entered the semaphore." );
         Console::WriteLine( L"Press the Enter key to exit." );
         Console::ReadLine();
         sem->Release();
      }
      catch ( UnauthorizedAccessException^ ex ) 
      {
         Console::WriteLine( L"Unauthorized access: {0}", ex->Message );
      }
   }
};
using System;
using System.Threading;
using System.Security.AccessControl;

internal class Example
{
    internal static void Main()
    {
        const string semaphoreName = "SemaphoreExample5";

        Semaphore sem = null;
        bool doesNotExist = false;
        bool unauthorized = false;

        // Attempt to open the named semaphore.
        try
        {
            // Open the semaphore with (SemaphoreRights.Synchronize
            // | SemaphoreRights.Modify), to enter and release the
            // named semaphore.
            //
            sem = Semaphore.OpenExisting(semaphoreName);
        }
        catch(WaitHandleCannotBeOpenedException)
        {
            Console.WriteLine("Semaphore does not exist.");
            doesNotExist = true;
        }
        catch(UnauthorizedAccessException ex)
        {
            Console.WriteLine("Unauthorized access: {0}", ex.Message);
            unauthorized = true;
        }

        // There are three cases: (1) The semaphore does not exist.
        // (2) The semaphore exists, but the current user doesn't 
        // have access. (3) The semaphore exists and the user has
        // access.
        //
        if (doesNotExist)
        {
            // The semaphore does not exist, so create it.
            //
            // The value of this variable is set by the semaphore
            // constructor. It is true if the named system semaphore was
            // created, and false if the named semaphore already existed.
            //
            bool semaphoreWasCreated;

            // Create an access control list (ACL) that denies the
            // current user the right to enter or release the 
            // semaphore, but allows the right to read and change
            // security information for the semaphore.
            //
            string user = Environment.UserDomainName + "\\" 
                + Environment.UserName;
            SemaphoreSecurity semSec = new SemaphoreSecurity();

            SemaphoreAccessRule rule = new SemaphoreAccessRule(
                user, 
                SemaphoreRights.Synchronize | SemaphoreRights.Modify, 
                AccessControlType.Deny);
            semSec.AddAccessRule(rule);

            rule = new SemaphoreAccessRule(
                user, 
                SemaphoreRights.ReadPermissions | SemaphoreRights.ChangePermissions,
                AccessControlType.Allow);
            semSec.AddAccessRule(rule);

            // Create a Semaphore object that represents the system
            // semaphore named by the constant 'semaphoreName', with
            // maximum count three, initial count three, and the
            // specified security access. The Boolean value that 
            // indicates creation of the underlying system object is
            // placed in semaphoreWasCreated.
            //
            sem = new Semaphore(3, 3, semaphoreName, 
                out semaphoreWasCreated, semSec);

            // If the named system semaphore was created, it can be
            // used by the current instance of this program, even 
            // though the current user is denied access. The current
            // program enters the semaphore. Otherwise, exit the
            // program.
            // 
            if (semaphoreWasCreated)
            {
                Console.WriteLine("Created the semaphore.");
            }
            else
            {
                Console.WriteLine("Unable to create the semaphore.");
                return;
            }

        }
        else if (unauthorized)
        {
            // Open the semaphore to read and change the access
            // control security. The access control security defined
            // above allows the current user to do this.
            //
            try
            {
                sem = Semaphore.OpenExisting(
                    semaphoreName, 
                    SemaphoreRights.ReadPermissions 
                        | SemaphoreRights.ChangePermissions);

                // Get the current ACL. This requires 
                // SemaphoreRights.ReadPermissions.
                SemaphoreSecurity semSec = sem.GetAccessControl();
                
                string user = Environment.UserDomainName + "\\" 
                    + Environment.UserName;

                // First, the rule that denied the current user 
                // the right to enter and release the semaphore must
                // be removed.
                SemaphoreAccessRule rule = new SemaphoreAccessRule(
                    user, 
                    SemaphoreRights.Synchronize | SemaphoreRights.Modify, 
                    AccessControlType.Deny);
                semSec.RemoveAccessRule(rule);

                // Now grant the user the correct rights.
                // 
                rule = new SemaphoreAccessRule(user, 
                     SemaphoreRights.Synchronize | SemaphoreRights.Modify, 
                     AccessControlType.Allow);
                semSec.AddAccessRule(rule);

                // Update the ACL. This requires
                // SemaphoreRights.ChangePermissions.
                sem.SetAccessControl(semSec);

                Console.WriteLine("Updated semaphore security.");

                // Open the semaphore with (SemaphoreRights.Synchronize 
                // | SemaphoreRights.Modify), the rights required to
                // enter and release the semaphore.
                //
                sem = Semaphore.OpenExisting(semaphoreName);

            }
            catch(UnauthorizedAccessException ex)
            {
                Console.WriteLine("Unable to change permissions: {0}", ex.Message);
                return;
            }
        }

        // Enter the semaphore, and hold it until the program
        // exits.
        //
        try
        {
            sem.WaitOne();
            Console.WriteLine("Entered the semaphore.");
            Console.WriteLine("Press the Enter key to exit.");
            Console.ReadLine();
            sem.Release();
        }
        catch(UnauthorizedAccessException ex)
        {
            Console.WriteLine("Unauthorized access: {0}", ex.Message);
        }
    }
}
Imports System.Threading
Imports System.Security.AccessControl

Friend Class Example

    <MTAThread> _
    Friend Shared Sub Main()
        Const semaphoreName As String = "SemaphoreExample5"

        Dim sem As Semaphore = Nothing
        Dim doesNotExist as Boolean = False
        Dim unauthorized As Boolean = False

        ' Attempt to open the named semaphore.
        Try
            ' Open the semaphore with (SemaphoreRights.Synchronize
            ' Or SemaphoreRights.Modify), to enter and release the
            ' named semaphore.
            '
            sem = Semaphore.OpenExisting(semaphoreName)
        Catch ex As WaitHandleCannotBeOpenedException
            Console.WriteLine("Semaphore does not exist.")
            doesNotExist = True
        Catch ex As UnauthorizedAccessException
            Console.WriteLine("Unauthorized access: {0}", ex.Message)
            unauthorized = True
        End Try

        ' There are three cases: (1) The semaphore does not exist.
        ' (2) The semaphore exists, but the current user doesn't 
        ' have access. (3) The semaphore exists and the user has
        ' access.
        '
        If doesNotExist Then
            ' The semaphore does not exist, so create it.
            '
            ' The value of this variable is set by the semaphore
            ' constructor. It is True if the named system semaphore was
            ' created, and False if the named semaphore already existed.
            '
            Dim semaphoreWasCreated As Boolean

            ' Create an access control list (ACL) that denies the
            ' current user the right to enter or release the 
            ' semaphore, but allows the right to read and change
            ' security information for the semaphore.
            '
            Dim user As String = Environment.UserDomainName _ 
                & "\" & Environment.UserName
            Dim semSec As New SemaphoreSecurity()

            Dim rule As New SemaphoreAccessRule(user, _
                SemaphoreRights.Synchronize Or SemaphoreRights.Modify, _
                AccessControlType.Deny)
            semSec.AddAccessRule(rule)

            rule = New SemaphoreAccessRule(user, _
                SemaphoreRights.ReadPermissions Or _
                SemaphoreRights.ChangePermissions, _
                AccessControlType.Allow)
            semSec.AddAccessRule(rule)

            ' Create a Semaphore object that represents the system
            ' semaphore named by the constant 'semaphoreName', with
            ' maximum count three, initial count three, and the
            ' specified security access. The Boolean value that 
            ' indicates creation of the underlying system object is
            ' placed in semaphoreWasCreated.
            '
            sem = New Semaphore(3, 3, semaphoreName, _
                semaphoreWasCreated, semSec)

            ' If the named system semaphore was created, it can be
            ' used by the current instance of this program, even 
            ' though the current user is denied access. The current
            ' program enters the semaphore. Otherwise, exit the
            ' program.
            ' 
            If semaphoreWasCreated Then
                Console.WriteLine("Created the semaphore.")
            Else
                Console.WriteLine("Unable to create the semaphore.")
                Return
            End If

        ElseIf unauthorized Then

            ' Open the semaphore to read and change the access
            ' control security. The access control security defined
            ' above allows the current user to do this.
            '
            Try
                sem = Semaphore.OpenExisting(semaphoreName, _
                    SemaphoreRights.ReadPermissions Or _
                    SemaphoreRights.ChangePermissions)

                ' Get the current ACL. This requires 
                ' SemaphoreRights.ReadPermissions.
                Dim semSec As SemaphoreSecurity = sem.GetAccessControl()
                
                Dim user As String = Environment.UserDomainName _ 
                    & "\" & Environment.UserName

                ' First, the rule that denied the current user 
                ' the right to enter and release the semaphore must
                ' be removed.
                Dim rule As New SemaphoreAccessRule(user, _
                    SemaphoreRights.Synchronize Or SemaphoreRights.Modify, _
                    AccessControlType.Deny)
                semSec.RemoveAccessRule(rule)

                ' Now grant the user the correct rights.
                ' 
                rule = New SemaphoreAccessRule(user, _
                    SemaphoreRights.Synchronize Or SemaphoreRights.Modify, _
                    AccessControlType.Allow)
                semSec.AddAccessRule(rule)

                ' Update the ACL. This requires
                ' SemaphoreRights.ChangePermissions.
                sem.SetAccessControl(semSec)

                Console.WriteLine("Updated semaphore security.")

                ' Open the semaphore with (SemaphoreRights.Synchronize 
                ' Or SemaphoreRights.Modify), the rights required to
                ' enter and release the semaphore.
                '
                sem = Semaphore.OpenExisting(semaphoreName)

            Catch ex As UnauthorizedAccessException
                Console.WriteLine("Unable to change permissions: {0}", _
                    ex.Message)
                Return
            End Try

        End If

        ' Enter the semaphore, and hold it until the program
        ' exits.
        '
        Try
            sem.WaitOne()
            Console.WriteLine("Entered the semaphore.")
            Console.WriteLine("Press the Enter key to exit.")
            Console.ReadLine()
            sem.Release()
        Catch ex As UnauthorizedAccessException
            Console.WriteLine("Unauthorized access: {0}", _
                ex.Message)
        End Try
    End Sub 
End Class 

注解

GetAccessControl 方法使用以下标志组合(结合使用按位 "或" 运算 ")搜索权限: AccessControlSections.AccessAccessControlSections.OwnerAccessControlSections.GroupThe GetAccessControl method uses the following combination of flags (combined using the bitwise OR operation) to search for permissions: AccessControlSections.Access, AccessControlSections.Owner, and AccessControlSections.Group.

用户必须具有调用此方法的 SemaphoreRights.ReadPermissions 权限,并且必须已使用 SemaphoreRights.ReadPermissions 的权限打开该信号量。The user must have SemaphoreRights.ReadPermissions rights to call this method, and the semaphore must have been opened with SemaphoreRights.ReadPermissions rights.

在本地信号灯上,访问控制安全性是不相关的。On a local semaphore, access control security is irrelevant. 如果 Semaphore 对象不表示已命名的系统信号量,则此方法将返回向任何用户授予所有权限的 SemaphoreSecurity 对象。If the Semaphore object does not represent a named system semaphore, this method returns a SemaphoreSecurity object that grants all rights to any user.

适用于

另请参阅