SplitContainer.SplitterWidth SplitContainer.SplitterWidth SplitContainer.SplitterWidth SplitContainer.SplitterWidth Property

定义

获取或设置拆分器的宽度(以像素为单位)。Gets or sets the width of the splitter in pixels.

public:
 property int SplitterWidth { int get(); void set(int value); };
public int SplitterWidth { get; set; }
member this.SplitterWidth : int with get, set
Public Property SplitterWidth As Integer

属性值

Int32,它表示拆分器的宽度(以像素为单位)。An Int32 representing the width of the splitter, in pixels. 默认值为四个像素。The default is four pixels.

异常

该值小于 1 或与方向不一致。The value is less than one or is incompatible with the orientation.

示例

下面的代码示例指定垂直拆分器的初始宽度为6像素(默认值)。The following code example specifies that the initial width of the vertical splitter is 6 pixels (the default). 还显示了垂直拆分器的其他基本属性。Other basic properties of a vertical splitter are also shown. 此示例是为SplitContainer类提供的更大示例的一部分。This example is part of a larger example provided for the SplitContainer class.

// Basic SplitContainer properties.
// This is a vertical splitter that moves in 10-pixel increments.
// This splitter needs no explicit Orientation property because Vertical is the default.
splitContainer1->Dock = System::Windows::Forms::DockStyle::Fill;
splitContainer1->ForeColor = System::Drawing::SystemColors::Control;
splitContainer1->Location = System::Drawing::Point( 0, 0 );
splitContainer1->Name = "splitContainer1";

// You can drag the splitter no nearer than 30 pixels from the left edge of the container.
splitContainer1->Panel1MinSize = 30;

// You can drag the splitter no nearer than 20 pixels from the right edge of the container.
splitContainer1->Panel2MinSize = 20;
splitContainer1->Size = System::Drawing::Size( 292, 273 );
splitContainer1->SplitterDistance = 79;

// This splitter moves in 10-pixel increments.
splitContainer1->SplitterIncrement = 10;
splitContainer1->SplitterWidth = 6;

// splitContainer1 is the first control in the tab order.
splitContainer1->TabIndex = 0;
splitContainer1->Text = "splitContainer1";

// When the splitter moves, the cursor changes shape.
splitContainer1->SplitterMoved += gcnew System::Windows::Forms::SplitterEventHandler( this, &Form1::splitContainer1_SplitterMoved );
splitContainer1->SplitterMoving += gcnew System::Windows::Forms::SplitterCancelEventHandler( this, &Form1::splitContainer1_SplitterMoving );

// Add a TreeView control to the left panel.
splitContainer1->Panel1->BackColor = System::Drawing::SystemColors::Control;

// Add a TreeView control to Panel1.
splitContainer1->Panel1->Controls->Add( treeView1 );
splitContainer1->Panel1->Name = "splitterPanel1";

// Controls placed on Panel1 support right-to-left fonts.
splitContainer1->Panel1->RightToLeft = System::Windows::Forms::RightToLeft::Yes;

// Basic SplitContainer properties.
// This is a vertical splitter that moves in 10-pixel increments.
// This splitter needs no explicit Orientation property because Vertical is the default.
splitContainer1.Dock = System.Windows.Forms.DockStyle.Fill;
splitContainer1.ForeColor = System.Drawing.SystemColors.Control;
splitContainer1.Location = new System.Drawing.Point(0, 0);
splitContainer1.Name = "splitContainer1";
// You can drag the splitter no nearer than 30 pixels from the left edge of the container.
splitContainer1.Panel1MinSize = 30;
// You can drag the splitter no nearer than 20 pixels from the right edge of the container.
splitContainer1.Panel2MinSize = 20;
splitContainer1.Size = new System.Drawing.Size(292, 273);
splitContainer1.SplitterDistance = 79;
// This splitter moves in 10-pixel increments.
splitContainer1.SplitterIncrement = 10;
splitContainer1.SplitterWidth = 6;
// splitContainer1 is the first control in the tab order.
splitContainer1.TabIndex = 0;
splitContainer1.Text = "splitContainer1";
// When the splitter moves, the cursor changes shape.
splitContainer1.SplitterMoved += new System.Windows.Forms.SplitterEventHandler(splitContainer1_SplitterMoved);
splitContainer1.SplitterMoving += new System.Windows.Forms.SplitterCancelEventHandler(splitContainer1_SplitterMoving);

// Add a TreeView control to the left panel.
splitContainer1.Panel1.BackColor = System.Drawing.SystemColors.Control;
// Add a TreeView control to Panel1.
splitContainer1.Panel1.Controls.Add(treeView1);
splitContainer1.Panel1.Name = "splitterPanel1";
// Controls placed on Panel1 support right-to-left fonts.
splitContainer1.Panel1.RightToLeft = System.Windows.Forms.RightToLeft.Yes;
' Basic SplitContainer properties.
' This is a vertical splitter that moves in 10-pixel increments.
' This splitter needs no explicit Orientation property because Vertical is the default.
splitContainer1.Dock = System.Windows.Forms.DockStyle.Fill
splitContainer1.ForeColor = System.Drawing.SystemColors.Control
splitContainer1.Location = New System.Drawing.Point(0, 0)
splitContainer1.Name = "splitContainer1"
' You can drag the splitter no nearer than 30 pixels from the left edge of the container.
splitContainer1.Panel1MinSize = 30
' You can drag the splitter no nearer than 20 pixels from the right edge of the container.
splitContainer1.Panel2MinSize = 20
splitContainer1.Size = New System.Drawing.Size(292, 273)
splitContainer1.SplitterDistance = 79
' This splitter moves in 10-pixel increments.
splitContainer1.SplitterIncrement = 10
splitContainer1.SplitterWidth = 6
' splitContainer1 is the first control in the tab order.
splitContainer1.TabIndex = 0
splitContainer1.Text = "splitContainer1"
  
' Add a TreeView control to the left panel.
splitContainer1.Panel1.BackColor = System.Drawing.SystemColors.Control
' Add a TreeView control to Panel1.
splitContainer1.Panel1.Controls.Add(treeView1)
splitContainer1.Panel1.Name = "splitterPanel1"
' Controls placed on Panel1 support right-to-left fonts.
splitContainer1.Panel1.RightToLeft = System.Windows.Forms.RightToLeft.Yes

注解

使用属性更改拆分器本身的宽度, SplitContainer而不是。 SplitterWidthUse the SplitterWidth property to change the width of the splitter itself, not the SplitContainer.

适用于