在 Lync Server 2013 中为分支站点定义 PSTN 网关Define a PSTN gateway for a branch site in Lync Server 2013

 

上次修改的主题: 2012-09-21Topic Last Modified: 2012-09-21

在中心网站上执行此过程,其中包含至少一个前端池或 Standard Edition server。Perform this procedure at the central site, which contains at least one Front End pool or Standard Edition server.

重要

执行该过程之前,必须满足以下条件:Before you perform the procedure, the following conditions must be in place:

  •  必须在中央站点设置 Lync Server 2013 通信软件。Lync Server 2013 communications software must be set up at the central site.

  • 必须在中央站点上部署中介服务器。Mediation Server must be deployed at the central site.

定义 PSTN 网关To define a PSTN gateway

  1. 依次单击“开始”****、“所有程序”****、“Microsoft Lync Server”****,然后单击“Lync Server 拓扑生成器”****。Click Start, click All Programs, click Microsoft Lync Server, and then click Lync Server Topology Builder.

  2. 在控制台树中展开中央站点,展开“分支机构站点”****,再展开要为其定义公用电话交换网 (PSTN) 网关的分支站点的名称,然后展开“共享组件”****。In the console tree, expand the central site, expand Branch Office Sites, expand name of the branch site that you want to define a public switched telephone network (PSTN) gateway for, and then expand Shared Components.

  3. 右键单击“PSTN 网关”****,然后单击“新建 IP/PSTN 网关”****。Right-click PSTN gateways, and then click New IP/PSTN Gateway.

  4. 在“定义新的 IP/PSTN 网关”**** 对话框中,单击“网关 FQDN 或 IP 地址”****,然后键入要在分支站点部署的网关的完全限定域名 (FQDN) 或 IP 地址。In the Define New IP/PSTN Gateway dialog box, click Gateway FQDN or IP Address, and then type the fully qualified domain name (FQDN) or IP address of the gateway that you are deploying at the branch site.

  5. 单击“IP/PSTN 网关的侦听端口”****,然后接受默认值。Click Listening Port for IP/PSTN Gateway, and then accept the default values.

  6. 在“SIP 传输协议”**** 列表中,单击网关使用的传输协议,然后单击“确定”****。In the SIP Transport Protocol list, click the transport protocol the gateway uses, and then click OK.

    备注

    出于安全考虑,强烈建议使用支持传输层安全性 (TLS) 的 PSTN 网关。For security reasons, we strongly recommend that you use a PSTN gateway that supports Transport Layer Security (TLS).

提示

使用 cmdlet Set-CsPstnGateway 修改 PSTN 网关的属性。Use the cmdlet Set-CsPstnGateway to modify properties of a PSTN gateway. 有关详细信息,请参阅 Lync Server 命令行管理程序帮助中的 CsPstnGatewayFor details, see Set-CsPstnGateway, in the Lync Server Management Shell Help.

分支站点恢复的下一步在 Lync Server 2013 中为分支站点恢复配置用户Next step for branch-site resiliency: Configuring users for branch site resiliency in Lync Server 2013