Restart-PcsvDevice
Restart-PcsvDevice
Restarts a remote hardware device.
语法
Parameter Set: InputObject (cdxml)
Restart-PcsvDevice -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ByComputerName
Restart-PcsvDevice [-TargetAddress] <String> [-Credential] <PSCredential> [-ManagementProtocol] <ManagementProtocol> [[-Port] <UInt16> ] [-AsJob] [-Authentication <Authentication> ] [-CimSession <CimSession[]> ] [-PassThru] [-SkipCACheck] [-SkipCNCheck] [-SkipRevocationCheck] [-ThrottleLimit <Int32> ] [-TimeoutSec <UInt32> ] [-UseSSL] [-Confirm] [-WhatIf] [ <CommonParameters>]
详细说明
The Restart-PcsvDevice cmdlet restarts a device remotely by using Web Services for Management (WS-Management) or Intelligent Platform Management Interface (IPMI). The cmdlet restarts the device if the current state of the device is enabled, or starts the device if the current state is other than enabled. If you specify a device that is a Baseboard Management Controller (BMC), the cmdlet restarts the system that the BMC manages, and not the BMC.
参数
-AsJob
别名 |
无 |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
false |
是否接受通配符？ |
false |
-Authentication<Authentication>
Specifies an authentication method to use for devices managed by WS-Management. Do not specify this parameter for devices managed by using IPMI. 此参数可接受的值如下：
-- Basic
-- Digest
-- Default
If you specify Default for this parameter and a value of WSMAN for the ManagementProtocol parameter, the cmdlet uses Basic authentication.
别名 |
无 |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
True (ByPropertyName) |
是否接受通配符？ |
false |
-CimSession<CimSession[]>
在远程会话中或在远程计算机上运行 cmdlet。输入计算机名称或会话对象，例如 New-CimSession 或 Get-CimSession cmdlet 的输出。默认为本地计算机上的当前会话。
别名 |
Session |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
false |
是否接受通配符？ |
false |
-Credential<PSCredential>
Specifies a PSCredential object based on a user name and password. To obtain a PSCredential object, use the Get-Credential cmdlet. For more information, type Get-Help Get-Credential. This parameter specifies the credential for the remote hardware device.
别名 |
无 |
是否为必需？ |
true |
位置？ |
3 |
默认值 |
无 |
是否接受管道输入？ |
True (ByPropertyName) |
是否接受通配符？ |
false |
-InputObject<CimInstance[]>
Specifies an array of devices, as MSFT_PCSVDevice objects, to manage. To obtain MSFT_PCSVDevice objects, use the Get-PcsvDevice cmdlet.
别名 |
无 |
是否为必需？ |
true |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
True (ByValue) |
是否接受通配符？ |
false |
-ManagementProtocol<ManagementProtocol>
Specifies a management protocol used to communicate with a device. 此参数可接受的值如下：
-- WSMAN
-- IPMI
Specify WSMAN for WS-Management devices that represent information by using Systems Management Architecture for Server Hardware (SMASH), Desktop and mobile Architecture for System Hardware (DASH) or Physical Computer System View profiles. Refer to your hardware documentation for supported management protocols.
别名 |
MP |
是否为必需？ |
true |
位置？ |
4 |
默认值 |
无 |
是否接受管道输入？ |
True (ByPropertyName) |
是否接受通配符？ |
false |
-PassThru
返回一个表示你正在处理的项的对象。默认情况下，此 cmdlet 将不产生任何输出。
别名 |
无 |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
false |
是否接受通配符？ |
false |
-Port<UInt16>
Specifies a port on the remote computer to use for the management connection. If you do not specify a port, the cmdlet uses the following default ports:
-- IPMI and WSMAN over HTTP. Port 623.
-- WSMAN over HTTPS. Port 664
别名 |
无 |
是否为必需？ |
false |
位置？ |
5 |
默认值 |
无 |
是否接受管道输入？ |
True (ByPropertyName) |
是否接受通配符？ |
false |
-SkipCACheck
Indicates that the client connects by using HTTPS without validating that a trusted CA signed the server certificate.
Do not specify this parameter unless you can establish trust in another way, such as if the remote computer is part of a network that is physically secure and isolated, or if the remote computer is a trusted host in a Windows Remote Management (WinRM) configuration. Do not specify this parameter if you specify a value of IPMI for the ManagementProtocol parameter.
别名 |
无 |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
True (ByPropertyName) |
是否接受通配符？ |
false |
-SkipCNCheck
Indicates that the certificate common name of the server does not need to match the host name of the server.
Specify this parameter only for managing devices by using WS-Management over HTTPS. Be sure to specify this parameter only for trusted computers. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.
别名 |
无 |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
True (ByPropertyName) |
是否接受通配符？ |
false |
-SkipRevocationCheck
Indicates that the cmdlet skips the revocation check of server certificates. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.
Be sure to specify this parameter only for trusted computers.
别名 |
无 |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
True (ByPropertyName) |
是否接受通配符？ |
false |
-TargetAddress<String>
Specifies the name or IP address of the management port on the remote hardware device. For server hardware, this is typically a dedicated Baseboard Management Controller (BMC) IP address. For other devices, like network switches, this is the IP address of their management port. For desktop and mobile devices, the BMC sometimes shares the same IP address as the computer.
别名 |
CN,ComputerName,IpAddress |
是否为必需？ |
true |
位置？ |
2 |
默认值 |
无 |
是否接受管道输入？ |
True (ByPropertyName) |
是否接受通配符？ |
false |
-ThrottleLimit<Int32>
指定可建立的用于运行此 cmdlet 的并发操作的最大数目。如果省略了此参数或输入了值 0，那么 Windows PowerShell® 将基于正在计算机上运行的 CIM cmdlet 的数目，计算 cmdlet 的最佳中止值。中止值仅适用于当前 cmdlet，而不适用于会话或计算机。
别名 |
无 |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
false |
是否接受通配符？ |
false |
-TimeoutSec<UInt32>
Specifies how long to wait, in seconds, for a response from the remote hardware device. After this period, the cmdlet abandons the connection attempt.
别名 |
无 |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
True (ByPropertyName) |
是否接受通配符？ |
false |
-UseSSL
Indicates that the server connects to the target computer by using SSL. WS-Management encrypts all content transmitted over the network. Specify this parameter to use the additional protection of HTTPS instead of HTTP. If you specify this parameter and SSL is not available on the connection port, the command fails.
别名 |
无 |
是否为必需？ |
false |
位置？ |
named |
默认值 |
无 |
是否接受管道输入？ |
True (ByPropertyName) |
是否接受通配符？ |
false |
-Confirm
运行 cmdlet 之前提示你进行确认。
是否为必需？ |
false |
位置？ |
named |
默认值 |
false |
是否接受管道输入？ |
false |
是否接受通配符？ |
false |
-WhatIf
显示如果运行 cmdlet 则会发生什么情况。cmdlet 未运行。
是否为必需？ |
false |
位置？ |
named |
默认值 |
false |
是否接受管道输入？ |
false |
是否接受通配符？ |
false |
<CommonParameters>
此 cmdlet 支持通用参数：-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer 和 -OutVariable。有关详细信息，请参阅 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
输入
输入类型是指可通过管道传送给 cmdlet 的对象的类型。
输出
输出类型是 cmdlet 所发出对象的类型。
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/HardwareManagement/MSFT_PCSVDevice
The cmdlet only returns an MSFT_PCSVDevice object if you specify the PassThru parameter.
示例
Example 1: Restart a remote IPMI hardware device
This example restarts an IPMI device remotely.
The first command uses the Get-Credential cmdlet to create a credential, and then stores it in the $Credential variable. The cmdlet prompts you for a user name and password. For more information, type Get-Help Get-Credential.
The second command connects with the target computer that has the IP address 10.0.0.29 by using the IPMI management protocol The command specifies the credential object stored in the $Credential variable. The command prompts the user for confirmation because restarting the system can cause a loss of unsaved state.
PS C:\> $Credential = Get-Credential Admin
PS C:\> Restart-PCSVDevice -TargetAddress 10.0.0.29 -ManagementProtocol IPMI -Credential $Credential
Example 2: Restart an IPMI device remotely by using an object variable
This example restarts an IPMI device remotely by using an object variable to specify the device.
The first command uses the Get-Credential cmdlet to create a credential, and then stores it in the $Credential variable. The cmdlet prompts you for a user name and password. For more information, type Get-Help Get-Credential.
The second command uses the Get-PcsvDevice cmdlet to connect with the target computer that has the IP address 10.0.0.29 by using the IPMI management protocol and the credential object stored in the $Credential variable. The command gets the remote device object and passes the object to the Restart-PcsvDevice cmdlet by using the pipeline operator. The Restart-PcsvDevice cmdlet restarts the remote device. The command sets the Confirm parameter to $False so the cmdlet does not prompt the user for confirmation to restart the device.
PS C:\> $Credential = Get-Credential Admin
PS C:\> Get-PcsvDevice -TargetAddress 10.0.0.29 -ManagementProtocol IPMI -Credential $Credential | Restart-PcsvDevice -Confirm $False