Using a Microsoft Azure VM as a DAG witness server
Applies to: Exchange Server 2013
Exchange Server 2013 enables you to configure your mailbox databases in a database availability group (DAG) for automatic datacenter failover. This configuration requires three separate physical locations: two datacenters for mailbox servers and a third location to place the witness server for the DAG. Organizations with only two physical locations now can also take advantage of automatic datacenter failover by using a Microsoft Azure file server virtual machine to act as the DAG's witness server.
This article focuses on the placement of the DAG witness on Microsoft Azure and assumes that you are familiar with site resilience concepts and already have a fully functional DAG infrastructure spanning two datacenters. If you don't already have your DAG infrastructure configured, we recommend that you first review the following articles:
Changes to Microsoft Azure
This configuration requires a multi-site VPN. It has always been possible to connect your organization's network to Microsoft Azure using a site-to-site VPN connection. However, in the past, Azure supported only a single site-to-site VPN. Since configuring a DAG and its witness across three datacenters required multiple site-to-site VPNs, placement of the DAG witness on an Azure VM wasn't initially possible.
In June 2014, Microsoft Azure introduced multi-site VPN support, which enabled organizations to connect multiple datacenters to the same Azure virtual network. This change also made it possible for organizations with two datacenters to leverage Microsoft Azure as a third location to place their DAG witness servers. To learn more about the multi-site VPN feature in Azure, see Configure a Multi-Site VPN.
This configuration leverages Azure virtual machines and a multi-site VPN for deploying the witness server and does not use the Azure Cloud Witness.
Microsoft Azure file server witness
The following diagram is an overview of using a Microsoft Azure file server VM as a DAG witness. You need an Azure virtual network, a multi-site VPN that connects your datacenters to your Azure virtual network, and a domain controller and a file server deployed on Azure virtual machines.
It is technically possible to use a single Azure VM for this purpose and place the file witness share on the domain controller. However, this will result in an unnecessary elevation of privileges. Therefore, it is not a recommended configuration.
DAG witness server on Microsoft Azure
The first thing you need to do in order to use a Microsoft Azure VM for your DAG witness is to get a subscription. See How to buy Azure for the best way to acquire an Azure subscription.
After you have your Azure subscription, you need to do the following in order:
Prepare the Microsoft Azure virtual network
Configure a multi-site VPN
Configure virtual machines
Configure the DAG witness
A significant portion of the guidance in this article involves Microsoft Azure configuration. Therefore, links to Azure documentation is used whenever applicable.
Two datacenters that are capable of supporting an Exchange high availability and site resilience deployment. See Planning for high availability and site resilience for more information
A public IP address that is not behind NAT for the VPN gateways in each site
A VPN device in each site that is compatible with Microsoft Azure. See About VPN Devices for Virtual Network for more information about compatible devices
Familiarity with DAG concepts and management
Familiarity with Windows PowerShell
Phase 1: Prepare the Microsoft Azure virtual network
Configuring the Microsoft Azure network is the most crucial part of the deployment process. At the end of this phase, you will have a fully functional Azure virtual network that is connected to your two datacenters via a multi-site VPN.
Register DNS servers
Because this configuration requires name resolution between the on-premises servers and Azure VMs, you will need to configure Azure to use your own DNS servers. Name resolution (DNS) topic provides an overview of name resolution in Azure.
Do the following to register your DNS servers:
In the Azure portal, go to networks, and then click NEW.
Click NETWORK SERVICES > VIRTUAL NETWORK > REGISTER DNS SERVER.
Type the name and IP address for your DNS server. The name specified here is a logical name used in the management portal and doesn't have to match the actual name of your DNS server.
Repeat steps 1 through 3 for any other DNS servers you want to add.
The DNS servers you register are not used in a round robin fashion. Azure VMs will use the first DNS server listed and will only use any additional servers if the first one is not available.
Repeat steps 1 through 3 to add the IP address you will use for the domain controller you will deploy on Microsoft Azure.
Create local (on-premises) network objects in Azure
Next, do the following to create logical network objects that represent your datacenters in Microsoft Azure:
In the Azure portal, and then go to networks, and then click NEW.
Click NETWORK SERVICES > VIRTUAL NETWORK > ADD LOCAL NETWORK.
Type the name for your first datacenter site and the IP address of the VPN device on that site. This IP address must be a static public IP address that is not behind NAT.
On the next screen, specify the IP subnets for your first site.
Repeat steps 1through 4 for your second site.
Create the Azure virtual network
Now, do the following to create an Azure virtual network that will be used by the VMs:
In the Azure portal, go to networks, and then click NEW.
Click NETWORK SERVICES > VIRTUAL NETWORK > CUSTOM CREATE.
On the Virtual Network Details page, specify a name for the virtual network, and select a geographic location for the network.
In the DNS Servers and VPN Connectivity page, verify that the DNS servers you previously registered are listed as the DNS servers.
Select the Configure a site-to-site VPN check box under SITE-TO-SITE CONNECTIVITY.
Do not select Use ExpressRoute because this will prevent the necessary configuration changes required to set up a multi-site VPN.
Under LOCAL NETWORK, select one of the two on-premises networks you configured.
In the Virtual Network Address Spaces page, specify the IP address range you will use for your Azure virtual network.
Checkpoint: Review the network configuration
At this point, when you go to networks, you should see the virtual network you configured under VIRTUAL NETWORKS, your local sites under LOCAL NETWORKS, and your registered DNS servers under DNS SERVERS.
Phase 2: Configure a multi-site VPN
The next step is to establish the VPN gateways to your on-premises sites. To do this, you need to:
Establish a VPN gateway to one of your sites by using the Azure portal.
Export the virtual network configuration settings.
Modify the configuration file for multi-site VPN.
Import the updated Azure network configuration.
Record the Azure gateway IP address and preshared keys.
Configure on-premises VPN devices.
For more information about configuring a multi-site VPN, see Configure a Multi-Site VPN.
Establish a VPN gateway to your first site
When creating your virtual gateway, note that you already specified that it will be connected to your first on-premises site. When you go into the virtual network dashboard, you will see that the gateway has not been created.
To establish the VPN gateway on the Azure side, follow the instructions in the Start the virtual network gateway section of Configure a Virtual Network Gateway in the Management Portal.
Only perform the steps in the "Start the virtual network gateway" section of the article, and do not continue to the subsequent sections.
Export virtual network configuration settings
The Azure management portal doesn't currently allow you to configure a multi-site VPN. For this configuration, you need to export the virtual network configuration settings to an XML file and then modify that file. Follow the instructions atExport Virtual Network Settings to a Network Configuration File to export your settings.
Modify the network configuration settings for the multi-site VPN
Open the file you exported in any XML editor. The gateway connections to your on-premises sites are listed in the "ConnectionsToLocalNetwork" section. Search for that term in the XML file to locate the section. This section in the configuration file will look like the following (assuming the site name you created for your local site is "Site A").
<ConnectionsToLocalNetwork> <LocalNetworkSiteRef name="Site A"> <Connection type="IPsec" /> </LocalNetworkSiteRef>
To configure your second site, add another "LocalNetworkSiteRef" section under the "ConnectionsToLocalNetwork" section. The section in the updated configuration file will look like the following (assuming the site name for your second local site is "Site B").
<ConnectionsToLocalNetwork> <LocalNetworkSiteRef name="Site A"> <Connection type="IPsec" /> <LocalNetworkSiteRef name="Site B"> <Connection type="IPsec" /> </LocalNetworkSiteRef>
Save the updated configuration settings file.
Import virtual network configuration settings
The second site reference you've added to the configuration file will trigger Microsoft Azure to create a new tunnel. Import the updated file using the instructions in Import a Network Configuration File. After you complete the import, the virtual network dashboard will show the gateway connections to both of your local sites.
Record the Azure gateway IP address and pre-shared keys
After the new network configuration settings are imported, the virtual network dashboard will display the IP address for the Azure gateway. This is the IP address that the VPN devices on both of your sites will connect to. Record this IP address for reference.
You also will need to get the pre-shared IPsec/IKE keys for each tunnel that was created. You will use these keys along with the Azure gateway IP address to configure your on-premises VPN devices.
You need to use PowerShell to get the pre-shared keys. If you aren't familiar with using PowerShell to manage Azure, see Azure PowerShell.
Use the Get-AzureVNetGatewayKey cmdlet to extract the pre-shared keys. Run this cmdlet once for each tunnel. The following example shows the commands you need to run to extract the keys for tunnels between the virtual network "Azure Site" and sites "Site A" and "Site B." In this example, the outputs are saved into separate files. Alternatively, you can pipeline these keys to other PowerShell cmdlets or use them in a script.
Get-AzureVNETGatewayKey -VNetName "Azure Site" -LocalNetworkSiteName "Site A" > C:\Keys\KeysForTunnelToSiteA.txt Get-AzureVNETGatewayKey -VNetName "Azure Site" -LocalNetworkSiteName "Site B" > C:\Keys\KeysForTunnelToSiteB.txt
Configure on-premises VPN devices
Microsoft Azure provides VPN device configuration scripts for supported VPN devices. Click the Download VPN Device Script link on the virtual network dashboard for the appropriate script for your VPN devices.
The script you download will have the configuration setting for the first site that you configured when you set up your virtual network, and can be used as is to configure the VPN device for that site. For example, if you specified Site A as the LOCAL NETWORK when you created your virtual network, the VPN device script can be used for Site A. However, you will need to modify it to configure the VPN device for Site B. Specifically, you need to update the pre-shared key to match the key for the second site.
For example, if you are using a Routing and Remote Access Service (RRAS) VPN device for your sites, you will need to:
Open the configuration script in any text editor.
#Add S2S VPN interfacesection.
Find the Add-VpnS2SInterface command in this section. Verify that the value for the SharedSecret parameter matches the pre-shared key for the site for which you are configuring the VPN device.
Other devices might require additional verifications. For example, the configuration scripts for Cisco devices set ACL rules by using the local IP address ranges. You need to review and verify all references to the local site in the configuration script before you use it. See the following topics for more information:
Checkpoint: Review the VPN status
At this point, both of your sites are connected to your Azure virtual network through the VPN gateways. You can validate the status of the multi-site VPN by running the following command in PowerShell.
Get-AzureVnetConnection -VNetName "Azure Site" | Format-Table LocalNetworkSiteName, ConnectivityState
If both tunnels are up and running, the output of this command will look like the following.
LocalNetworkSiteName ConnectivityState -------------------- ----------------- Site A Connected Site B Connected
You can also verify connectivity by viewing the virtual network dashboard in the Azure management portal. The STATUS column for both sites will show as Connected.
It can take several minutes after the connection is successfully established for the status change to appear in the Azure management portal.
Phase 3: Configure virtual machines
You need to create a minimum of two virtual machines in Microsoft Azure for this deployment: a domain controller and a file server that will serve as the DAG witness.
Create virtual machines for your domain controller and your file server using the instructions in Create a Virtual Machine Running Windows. Make sure that you select the virtual network you created for REGION/AFFINITY GROUP/VIRTUAL NETWORK when specifying the settings of your virtual machines.
Specify preferred IP addresses for both the domain controller and the file server using Azure PowerShell. When you specify a preferred IP address for a VM, it needs to be updated, which will require restarting the VM. The following example sets the IP addresses for Azure-DC and Azure-FSW to 10.0.0.10 and 10.0.0.11 respectively.
Get-AzureVM Azure-DC | Set-AzureStaticVNetIP -IPAddress 10.0.0.10 | Update-AzureVM Get-AzureVM Azure-FSW | Set-AzureStaticVNetIP -IPAddress 10.0.0.11 | Update-AzureVM
A VM with a preferred IP address will attempt to use that address. However, if that address has been assigned to a different VM, the VM with the preferred IP address configuration will not start. To avoid this situation, make sure that the IP address you use isn't assigned to another VM. See Configure a Static Internal IP Address for a VM for more information.
Provision the domain controller VM on Azure using the standards used by your organization.
Prepare the file server with the prerequisites for an Exchange DAG witness:
Add the File Server role using the Add Roles and Features Wizard or the Add-WindowsFeature cmdlet.
Add the Exchange Trusted Subsystems universal security group to the Local Administrators group.
Checkpoint: Review virtual machine status
At this point, your virtual machines should be up and running and should be able to communicate with servers in both of your on-premises datacenters:
Verify that your domain controller in Azure is replicating with your on-premises domain controllers.
Verify that you can reach the file server on Azure by name and establish an SMB connection from your Exchange servers.
Verify that you can reach your Exchange servers by name from the file server on Azure.
Phase 4: Configure the DAG witness
Finally, you need to configure your DAG to use the new witness server. By default, Exchange uses the C:\DAGFileShareWitnesses as the file share witness path on your witness server. If you are using a custom file path, you should also update the witness directory for the specific share.
Connect to Exchange Management Shell.
Run the following command to configure the witness server for your DAGs.
Set-DatabaseAvailabilityGroup -Identity DAG1 -WitnessServer Azure-FSW
See the following topics for more information:
Checkpoint: Validate the DAG file share witness
At this point, you have configured your DAG to use the file server on Azure as your DAG witness. Do the following to validate your configuration:
Validate the DAG configuration by running the following command.
Get-DatabaseAvailabilityGroup -Identity DAG1 -Status | Format-List Name, WitnessServer, WitnessDirectory, WitnessShareInUse
Verify that the WitnessServer parameter is set to the file server on Azure, the WitnessDirectory parameter is set to the correct path, and the WitnessShareInUse parameter shows Primary.
If the DAG has an even number of nodes, the file share witness will be configured. Validate the file share witness setting in cluster properties by running the following command. The value for the SharePath parameter should point to the file server and display the correct path.
Get-ClusterResource -Cluster MBX1 | Get-ClusterParameter | Format-List
Next, verify the status of the "File Share Witness" cluster resource by running the following command. The State of the cluster resource should display Online.
Get-ClusterResource -Cluster MBX1
Lastly, verify that the share is successfully created on the file server by reviewing the folder in File Explorer and the shares in Server Manager.
Send feedback about: