AccessibleObject.GetChild(Int32) Metodo

Definizione

Recupera l'oggetto figlio accessibile corrispondente all'indice specificato.Retrieves the accessible child corresponding to the specified index.

public:
 virtual System::Windows::Forms::AccessibleObject ^ GetChild(int index);
public virtual System.Windows.Forms.AccessibleObject GetChild (int index);
abstract member GetChild : int -> System.Windows.Forms.AccessibleObject
override this.GetChild : int -> System.Windows.Forms.AccessibleObject
Public Overridable Function GetChild (index As Integer) As AccessibleObject

Parametri

index
Int32

Indice in base zero dell'oggetto figlio accessibile.The zero-based index of the accessible child.

Restituisce

Oggetto AccessibleObject che rappresenta l'oggetto figlio accessibile corrispondente all'indice specificato.An AccessibleObject that represents the accessible child corresponding to the specified index.

Esempi

Nell'esempio seguente viene illustrata la creazione di un controllo Chart in grado di riconoscere l'accessibilità utilizzando le classi AccessibleObject e Control.ControlAccessibleObject per esporre le informazioni accessibili.The following example demonstrates the creation of an accessibility-aware chart control, using the AccessibleObject and Control.ControlAccessibleObject classes to expose accessible information. Il controllo traccia due curve insieme a una legenda.The control plots two curves along with a legend. La classe ChartControlAccessibleObject, che deriva da ControlAccessibleObject, viene utilizzata nel metodo CreateAccessibilityInstance per fornire informazioni personalizzate accessibili per il controllo Chart.The ChartControlAccessibleObject class, which derives from ControlAccessibleObject, is used in the CreateAccessibilityInstance method to provide custom accessible information for the chart control. Poiché la legenda del grafico non è un controllo effettivo in base Control, ma viene invece disegnato dal controllo Chart, non dispone di alcuna informazione accessibile incorporata.Since the chart legend is not an actual Control -based control, but instead is drawn by the chart control, it does not have any built-in accessible information. Per questo motivo, la classe ChartControlAccessibleObject esegue l'override del metodo GetChild per restituire il CurveLegendAccessibleObject che rappresenta le informazioni accessibili per ogni parte della legenda.Because of this, the ChartControlAccessibleObject class overrides the GetChild method to return the CurveLegendAccessibleObject that represents accessible information for each part of the legend. Quando un'applicazione in grado di riconoscere accessibilità utilizza questo controllo, il controllo può fornire le informazioni accessibili necessarie.When an accessible-aware application uses this control, the control can provide the necessary accessible information.

Questo estratto di codice illustra l'override del metodo GetChild.This code excerpt demonstrates overriding the GetChild method. Per l'esempio di codice completo, vedere la panoramica della classe AccessibleObject.See the AccessibleObject class overview for the complete code example.

// Inner class ChartControlAccessibleObject represents accessible information associated with the ChartControl.
// The ChartControlAccessibleObject is returned in the ChartControl::CreateAccessibilityInstance .
ref class ChartControlAccessibleObject: public ControlAccessibleObject
{
private:
   ChartControl^ chartControl;

public:
   ChartControlAccessibleObject( ChartControl^ ctrl )
      : ControlAccessibleObject( ctrl )
   {
      chartControl = ctrl;
   }


   property System::Windows::Forms::AccessibleRole Role 
   {

      // Gets the role for the Chart. This is used by accessibility programs.
      virtual System::Windows::Forms::AccessibleRole get() override
      {
         return ::AccessibleRole::Chart;
      }

   }

   property AccessibleStates State 
   {

      // Gets the state for the Chart. This is used by accessibility programs.
      virtual AccessibleStates get() override
      {
         return AccessibleStates::ReadOnly;
      }

   }

   // The CurveLegend objects are "child" controls in terms of accessibility so
   // return the number of ChartLengend objects.
   virtual int GetChildCount() override
   {
      return chartControl->Legends->Length;
   }


   // Gets the Accessibility object of the child CurveLegend idetified by index.
   virtual AccessibleObject^ GetChild( int index ) override
   {
      if ( index >= 0 && index < chartControl->Legends->Length )
      {
         return chartControl->Legends[ index ]->AccessibilityObject;
      }

      return nullptr;
   }


internal:

   // Helper function that is used by the CurveLegend's accessibility object
   // to navigate between sibiling controls. Specifically, this function is used in
   // the CurveLegend::CurveLegendAccessibleObject.Navigate function.
   AccessibleObject^ NavigateFromChild( CurveLegend::CurveLegendAccessibleObject^ child, AccessibleNavigation navdir )
   {
      switch ( navdir )
      {
         case AccessibleNavigation::Down:
         case AccessibleNavigation::Next:
            return GetChild( child->ID + 1 );

         case AccessibleNavigation::Up:
         case AccessibleNavigation::Previous:
            return GetChild( child->ID - 1 );
      }
      return nullptr;
   }


   // Helper function that is used by the CurveLegend's accessibility object
   // to select a specific CurveLegend control. Specifically, this function is used
   // in the CurveLegend::CurveLegendAccessibleObject.Select function.
   void SelectChild( CurveLegend::CurveLegendAccessibleObject^ child, AccessibleSelection selection )
   {
      int childID = child->ID;
      
      // Determine which selection action should occur, based on the
      // AccessibleSelection value.
      if ( (selection & AccessibleSelection::TakeSelection) != (AccessibleSelection)0 )
      {
         for ( int i = 0; i < chartControl->Legends->Length; i++ )
         {
            if ( i == childID )
            {
               chartControl->Legends[ i ]->Selected = true;
            }
            else
            {
               chartControl->Legends[ i ]->Selected = false;
            }

         }
         
         // AccessibleSelection->AddSelection means that the CurveLegend will be selected.
         if ( (selection & AccessibleSelection::AddSelection) != (AccessibleSelection)0 )
         {
            chartControl->Legends[ childID ]->Selected = true;
         }
         
         // AccessibleSelection->AddSelection means that the CurveLegend will be unselected.
         if ( (selection & AccessibleSelection::RemoveSelection) != (AccessibleSelection)0 )
         {
            chartControl->Legends[ childID ]->Selected = false;
         }
      }
   }

};

// class ChartControlAccessibleObject
// Inner class ChartControlAccessibleObject represents accessible information associated with the ChartControl.
// The ChartControlAccessibleObject is returned in the ChartControl.CreateAccessibilityInstance override.
public class ChartControlAccessibleObject : ControlAccessibleObject
{
    ChartControl chartControl;

    public ChartControlAccessibleObject(ChartControl ctrl) : base(ctrl) 
    {
        chartControl = ctrl;
    }

    // Gets the role for the Chart. This is used by accessibility programs.
    public override AccessibleRole Role
    {  
        get {
            return AccessibleRole.Chart;
        }
    }

    // Gets the state for the Chart. This is used by accessibility programs.
    public override AccessibleStates State
    {  
        get {                    
            return AccessibleStates.ReadOnly;
        }
    }

    // The CurveLegend objects are "child" controls in terms of accessibility so 
    // return the number of ChartLengend objects.
    public override int GetChildCount()
    {  
        return chartControl.Legends.Length;
    }

    // Gets the Accessibility object of the child CurveLegend idetified by index.
    public override AccessibleObject GetChild(int index)
    {  
        if (index >= 0 && index < chartControl.Legends.Length) {
            return chartControl.Legends[index].AccessibilityObject;
        }                
        return null;
    }

    // Helper function that is used by the CurveLegend's accessibility object
    // to navigate between sibiling controls. Specifically, this function is used in
    // the CurveLegend.CurveLegendAccessibleObject.Navigate function.
    internal AccessibleObject NavigateFromChild(CurveLegend.CurveLegendAccessibleObject child, 
                                                AccessibleNavigation navdir) 
    {  
        switch(navdir) {
            case AccessibleNavigation.Down:
            case AccessibleNavigation.Next:
                return GetChild(child.ID + 1);
                
            case AccessibleNavigation.Up:
            case AccessibleNavigation.Previous:
                return GetChild(child.ID - 1);                        
        }
        return null;
    }

    // Helper function that is used by the CurveLegend's accessibility object
    // to select a specific CurveLegend control. Specifically, this function is used
    // in the CurveLegend.CurveLegendAccessibleObject.Select function.
    internal void SelectChild(CurveLegend.CurveLegendAccessibleObject child, AccessibleSelection selection) 
    {   
        int childID = child.ID;

        // Determine which selection action should occur, based on the
        // AccessibleSelection value.
        if ((selection & AccessibleSelection.TakeSelection) != 0) {
            for(int i = 0; i < chartControl.Legends.Length; i++) {
                if (i == childID) {
                    chartControl.Legends[i].Selected = true;                        
                } else {
                    chartControl.Legends[i].Selected = false;
                }
            }

            // AccessibleSelection.AddSelection means that the CurveLegend will be selected.
            if ((selection & AccessibleSelection.AddSelection) != 0) {
                chartControl.Legends[childID].Selected = true;                        
            }

            // AccessibleSelection.AddSelection means that the CurveLegend will be unselected.
            if ((selection & AccessibleSelection.RemoveSelection) != 0) {
                chartControl.Legends[childID].Selected = false;                        
            }
        }            
    }
}
' Inner Class ChartControlAccessibleObject represents accessible information 
' associated with the ChartControl.
' The ChartControlAccessibleObject is returned in the         ' ChartControl.CreateAccessibilityInstance override.
Public Class ChartControlAccessibleObject
    Inherits Control.ControlAccessibleObject

    Private chartControl As ChartControl
    
    Public Sub New(ctrl As ChartControl)
        MyBase.New(ctrl)
        chartControl = ctrl
    End Sub
    
    ' Get the role for the Chart. This is used by accessibility programs.            
    Public Overrides ReadOnly Property Role() As AccessibleRole
        Get
            Return System.Windows.Forms.AccessibleRole.Chart
        End Get
    End Property
    
    ' Get the state for the Chart. This is used by accessibility programs.            
    Public Overrides ReadOnly Property State() As AccessibleStates
        Get
            Return AccessibleStates.ReadOnly
        End Get
    End Property                        
    
    ' The CurveLegend objects are "child" controls in terms of accessibility so 
    ' return the number of ChartLengend objects.            
    Public Overrides Function GetChildCount() As Integer
        Return chartControl.Legends.Length
    End Function 
    
    ' Get the Accessibility object of the child CurveLegend idetified by index.
    Public Overrides Function GetChild(index As Integer) As AccessibleObject
        If index >= 0 And index < chartControl.Legends.Length Then
            Return chartControl.Legends(index).AccessibilityObject
        End If
        Return Nothing
    End Function 
    
    ' Helper function that is used by the CurveLegend's accessibility object
    ' to navigate between sibiling controls. Specifically, this function is used in
    ' the CurveLegend.CurveLegendAccessibleObject.Navigate function.
    Friend Function NavigateFromChild(child As CurveLegend.CurveLegendAccessibleObject, _
                                    navdir As AccessibleNavigation) As AccessibleObject
        Select Case navdir
            Case AccessibleNavigation.Down, AccessibleNavigation.Next
                    Return GetChild(child.ID + 1)
            
            Case AccessibleNavigation.Up, AccessibleNavigation.Previous
                    Return GetChild(child.ID - 1)
        End Select
        Return Nothing
    End Function            

    ' Helper function that is used by the CurveLegend's accessibility object
    ' to select a specific CurveLegend control. Specifically, this function is used 
    ' in the CurveLegend.CurveLegendAccessibleObject.Select function.            
    Friend Sub SelectChild(child As CurveLegend.CurveLegendAccessibleObject, selection As AccessibleSelection)
        Dim childID As Integer = child.ID
        
        ' Determine which selection action should occur, based on the
        ' AccessibleSelection value.
        If (selection And AccessibleSelection.TakeSelection) <> 0 Then
            Dim i As Integer
            For i = 0 To chartControl.Legends.Length - 1
                If i = childID Then
                    chartControl.Legends(i).Selected = True
                Else
                    chartControl.Legends(i).Selected = False
                End If
            Next i
            
            ' AccessibleSelection.AddSelection means that the CurveLegend will be selected.
            If (selection And AccessibleSelection.AddSelection) <> 0 Then
                chartControl.Legends(childID).Selected = True
            End If

            ' AccessibleSelection.AddSelection means that the CurveLegend will be unselected.                    
            If (selection And AccessibleSelection.RemoveSelection) <> 0 Then
                chartControl.Legends(childID).Selected = False
            End If
        End If
    End Sub
End Class

Note per gli eredi

Tutti gli oggetti accessibili devono supportare questa proprietà.All accessible objects must support this property. Se il metodo non viene sottoposto a override, restituisce null.If the method is not overridden, it returns null. Eseguire l'override di questo metodo quando un oggetto accessibile deve fornire elementi figlio accessibili personalizzati.Override this method when an accessible object needs to provide custom accessible children. Se l'indice non è valido, questo metodo deve restituire null.If the index is invalid, then this method should return null. Quando si esegue l'override di questo metodo, è necessario anche eseguire l'override di GetChildCount().When you override this method, you must also override GetChildCount().

Si applica a