Udostępnij za pośrednictwem


CustomAttributeData.GetCustomAttributes Metoda

Definicja

Zwraca listę CustomAttributeData obiektów reprezentujących dane dotyczące atrybutów, które zostały zastosowane do obiektu docelowego.

Przeciążenia

GetCustomAttributes(Assembly)

Zwraca listę CustomAttributeData obiektów reprezentujących dane dotyczące atrybutów, które zostały zastosowane do zestawu docelowego.

GetCustomAttributes(MemberInfo)

Zwraca listę CustomAttributeData obiektów reprezentujących dane dotyczące atrybutów, które zostały zastosowane do elementu docelowego.

GetCustomAttributes(Module)

Zwraca listę CustomAttributeData obiektów reprezentujących dane dotyczące atrybutów, które zostały zastosowane do modułu docelowego.

GetCustomAttributes(ParameterInfo)

Zwraca listę CustomAttributeData obiektów reprezentujących dane dotyczące atrybutów, które zostały zastosowane do parametru docelowego.

GetCustomAttributes(Assembly)

Źródło:
CustomAttributeData.cs
Źródło:
CustomAttributeData.cs
Źródło:
CustomAttributeData.cs

Zwraca listę CustomAttributeData obiektów reprezentujących dane dotyczące atrybutów, które zostały zastosowane do zestawu docelowego.

public:
 static System::Collections::Generic::IList<System::Reflection::CustomAttributeData ^> ^ GetCustomAttributes(System::Reflection::Assembly ^ target);
public static System.Collections.Generic.IList<System.Reflection.CustomAttributeData> GetCustomAttributes (System.Reflection.Assembly target);
static member GetCustomAttributes : System.Reflection.Assembly -> System.Collections.Generic.IList<System.Reflection.CustomAttributeData>
Public Shared Function GetCustomAttributes (target As Assembly) As IList(Of CustomAttributeData)

Parametry

target
Assembly

Zestaw, którego dane atrybutu niestandardowego mają zostać pobrane.

Zwraca

Lista obiektów reprezentujących dane dotyczące atrybutów, które zostały zastosowane do zestawu docelowego.

Wyjątki

target to null.

Przykłady

W poniższym przykładzie zdefiniowano atrybut niestandardowy z czterema konstruktorami i czterema właściwościami. Dwie właściwości są tylko do odczytu i są ustawiane przy użyciu parametrów pozycyjnych konstruktorów. Pozostałe dwie właściwości to odczyt/zapis i można je ustawić tylko przy użyciu nazwanych argumentów. Jedna właściwość pozycyjna jest tablicą ciągów, a jedna nazwana właściwość jest tablicą liczb całkowitych.

Atrybut jest stosowany do zestawu, do typu zadeklarowanego w zestawie, do metody typu i do parametru metody metody . W tych przypadkach są używane różne konstruktory. Po wykonaniu zestaw ładuje się do kontekstu tylko odbicia i wyświetla atrybuty niestandardowe.

Atrybut stosowany do typu demonstruje właściwości tablicy z argumentami zarówno pozycyjnymi, jak i nazwanymi.

Metoda GetCustomAttributes służy Main() do pobierania atrybutów niestandardowych zastosowanych do zestawu. Zwracana wartość metody jest przekazywana ShowAttributeData do metody .

using namespace System;
using namespace System::Reflection;
using namespace System::Collections::Generic;
using namespace System::Collections::ObjectModel;

// An enumeration used by the ExampleAttribute class.
public enum class ExampleKind
{
   FirstKind, SecondKind, ThirdKind, FourthKind
};

// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets::All)]
public ref class ExampleAttribute: public Attribute
{
private:
   // Data for properties.
   ExampleKind kindValue;
   String^ noteValue;
   array<String^>^ arrayStrings;
   array<int>^ arrayNumbers;

   // Constructors. 
   void ExampleAttributeInitialize( ExampleKind initKind, array<String^>^ initStrings )
   {
      kindValue = initKind;
      arrayStrings = initStrings;
   }
public:
   ExampleAttribute()
   {
      ExampleAttributeInitialize( ExampleKind::FirstKind, nullptr );
   }
   ExampleAttribute( ExampleKind initKind )
   {
      ExampleAttributeInitialize( initKind, nullptr );
   }
   ExampleAttribute( ExampleKind initKind, array<String^>^ initStrings )
   {
      ExampleAttributeInitialize( initKind, initStrings );
   }

   // Properties. The Note and Numbers properties must be read/write, so they
   // can be used as named parameters.
   //
   property ExampleKind Kind 
   {
      ExampleKind get()
      {
         return kindValue;
      }
   }
   property array<String^>^ Strings
   {
      array<String^>^ get()
      {
         return arrayStrings;
      }
   }
   property String^ Note 
   {
      String^ get()
      {
         return noteValue;
      }

      void set( String^ value )
      {
         noteValue = value;
      }
   }
   property array<int>^ Numbers
   {
      array<int>^ get()
      {
         return arrayNumbers;
      }

      void set( array<int>^ value )
      {
         arrayNumbers = value;
      }
   }
};

// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind::ThirdKind,Note="This is a note on the assembly.")];

// The example attribute is applied to the test class.
//
[Example(ExampleKind::SecondKind, 
         gcnew array<String^> { "String array argument, line 1", 
                        "String array argument, line 2", 
                        "String array argument, line 3" }, 
         Note="This is a note on the class.",
         Numbers = gcnew array<int> { 53, 57, 59 })] 
public ref class Test
{
public:
   // The example attribute is applied to a method, using the
   // parameterless constructor and supplying a named argument.
   // The attribute is also applied to the method parameter.
   //
   [Example(Note="This is a note on a method.")]
   void TestMethod( [Example] Object^ arg ){}

   // Main() gets objects representing the assembly, the test
   // type, the test method, and the method parameter. Custom
   // attribute data is displayed for each of these.
   //
   static void Main()
   {
      Assembly^ assembly = Assembly::ReflectionOnlyLoad( "Source" );
      Type^ t = assembly->GetType( "Test" );
      MethodInfo^ m = t->GetMethod( "TestMethod" );
      array<ParameterInfo^>^p = m->GetParameters();

      Console::WriteLine( "\r\nAttributes for assembly: '{0}'", assembly );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( assembly ) );
      Console::WriteLine( "\r\nAttributes for type: '{0}'", t );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( t ) );
      Console::WriteLine( "\r\nAttributes for member: '{0}'", m );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( m ) );
      Console::WriteLine( "\r\nAttributes for parameter: '{0}'", p );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( p[ 0 ] ) );
   }

private:
    static void ShowValueOrArray(CustomAttributeTypedArgument^ cata)
    {
        if (cata->Value->GetType() == ReadOnlyCollection<CustomAttributeTypedArgument>::typeid)
        {
            Console::WriteLine("         Array of '{0}':", cata->ArgumentType);

            for each (CustomAttributeTypedArgument^ cataElement in 
                (ReadOnlyCollection<CustomAttributeTypedArgument>^) cata->Value)
            {
                Console::WriteLine("             Type: '{0}'  Value: '{1}'",
                    cataElement->ArgumentType, cataElement->Value);
            }
        }
        else
        {
            Console::WriteLine( "         Type: '{0}'  Value: '{1}'",
               cata->ArgumentType, cata->Value );
        }
    }

   static void ShowAttributeData( IList< CustomAttributeData^ >^ attributes )
   {
      for each ( CustomAttributeData^ cad in attributes )
      {
         Console::WriteLine( "   {0}", cad );
         Console::WriteLine( "      Constructor: '{0}'", cad->Constructor );

         Console::WriteLine( "      Constructor arguments:" );
         for each ( CustomAttributeTypedArgument^ cata in cad->ConstructorArguments )
         {
            ShowValueOrArray(cata);
         }

         Console::WriteLine( "      Named arguments:" );
         for each ( CustomAttributeNamedArgument cana in cad->NamedArguments )
         {
            Console::WriteLine( "         MemberInfo: '{0}'", cana.MemberInfo );
            ShowValueOrArray(cana.TypedValue);
         }
      }
   }
};

int main()
{
   Test::Main();
}

/* This code example produces output similar to the following:

Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
      Constructor: 'Void .ctor(Int32)'
      Constructor arguments:
         Type: 'System.Int32'  Value: '8'
      Named arguments:
   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'Boolean WrapNonExceptionThrows'
         Type: 'System.Boolean'  Value: 'True'
   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
      Constructor: 'Void .ctor(ExampleKind)'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '2'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the assembly.'

Attributes for type: 'Test'
   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
      Constructor: 'Void .ctor(ExampleKind, System.String[])'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '1'
         Array of 'System.String[]':
             Type: 'System.String'  Value: 'String array argument, line 1'
             Type: 'System.String'  Value: 'String array argument, line 2'
             Type: 'System.String'  Value: 'String array argument, line 3'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the class.'
         MemberInfo: 'Int32[] Numbers'
         Array of 'System.Int32[]':
             Type: 'System.Int32'  Value: '53'
             Type: 'System.Int32'  Value: '57'
             Type: 'System.Int32'  Value: '59'

Attributes for member: 'Void TestMethod(System.Object)'
   [ExampleAttribute(Note = "This is a note on a method.")]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on a method.'

Attributes for parameter: 'System.Object arg'
   [ExampleAttribute()]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
*/
using System;
using System.Reflection;
using System.Collections.Generic;
using System.Collections.ObjectModel;

// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind.ThirdKind, Note="This is a note on the assembly.")]

// An enumeration used by the ExampleAttribute class.
public enum ExampleKind
{
    FirstKind,
    SecondKind,
    ThirdKind,
    FourthKind
};

// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets.All)]
public class ExampleAttribute : Attribute
{
    // Data for properties.
    private ExampleKind kindValue;
    private string noteValue;
    private string[] arrayStrings;
    private int[] arrayNumbers;

    // Constructors. The parameterless constructor (.ctor) calls
    // the constructor that specifies ExampleKind and an array of
    // strings, and supplies the default values.
    //
    public ExampleAttribute(ExampleKind initKind, string[] initStrings)
    {
        kindValue = initKind;
        arrayStrings = initStrings;
    }
    public ExampleAttribute(ExampleKind initKind) : this(initKind, null) {}
    public ExampleAttribute() : this(ExampleKind.FirstKind, null) {}

    // Properties. The Note and Numbers properties must be read/write, so they
    // can be used as named parameters.
    //
    public ExampleKind Kind { get { return kindValue; }}
    public string[] Strings { get { return arrayStrings; }}
    public string Note
    {
        get { return noteValue; }
        set { noteValue = value; }
    }
    public int[] Numbers
    {
        get { return arrayNumbers; }
        set { arrayNumbers = value; }
    }
}

// The example attribute is applied to the test class.
//
[Example(ExampleKind.SecondKind,
         new string[] { "String array argument, line 1",
                        "String array argument, line 2",
                        "String array argument, line 3" },
         Note="This is a note on the class.",
         Numbers = new int[] { 53, 57, 59 })]
public class Test
{
    // The example attribute is applied to a method, using the
    // parameterless constructor and supplying a named argument.
    // The attribute is also applied to the method parameter.
    //
    [Example(Note="This is a note on a method.")]
    public void TestMethod([Example] object arg) { }

    // Main() gets objects representing the assembly, the test
    // type, the test method, and the method parameter. Custom
    // attribute data is displayed for each of these.
    //
    public static void Main()
    {
        Assembly asm = Assembly.ReflectionOnlyLoad("Source");
        Type t = asm.GetType("Test");
        MethodInfo m = t.GetMethod("TestMethod");
        ParameterInfo[] p = m.GetParameters();

        Console.WriteLine("\r\nAttributes for assembly: '{0}'", asm);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm));
        Console.WriteLine("\r\nAttributes for type: '{0}'", t);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t));
        Console.WriteLine("\r\nAttributes for member: '{0}'", m);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m));
        Console.WriteLine("\r\nAttributes for parameter: '{0}'", p);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p[0]));
    }

    private static void ShowAttributeData(
        IList<CustomAttributeData> attributes)
    {
        foreach( CustomAttributeData cad in attributes )
        {
            Console.WriteLine("   {0}", cad);
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor);

            Console.WriteLine("      Constructor arguments:");
            foreach( CustomAttributeTypedArgument cata
                in cad.ConstructorArguments )
            {
                ShowValueOrArray(cata);
            }

            Console.WriteLine("      Named arguments:");
            foreach( CustomAttributeNamedArgument cana
                in cad.NamedArguments )
            {
                Console.WriteLine("         MemberInfo: '{0}'",
                    cana.MemberInfo);
                ShowValueOrArray(cana.TypedValue);
            }
        }
    }

    private static void ShowValueOrArray(CustomAttributeTypedArgument cata)
    {
        if (cata.Value.GetType() == typeof(ReadOnlyCollection<CustomAttributeTypedArgument>))
        {
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType);

            foreach (CustomAttributeTypedArgument cataElement in
                (ReadOnlyCollection<CustomAttributeTypedArgument>) cata.Value)
            {
                Console.WriteLine("             Type: '{0}'  Value: '{1}'",
                    cataElement.ArgumentType, cataElement.Value);
            }
        }
        else
        {
            Console.WriteLine("         Type: '{0}'  Value: '{1}'",
                cata.ArgumentType, cata.Value);
        }
    }
}

/* This code example produces output similar to the following:

Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
      Constructor: 'Void .ctor(Int32)'
      Constructor arguments:
         Type: 'System.Int32'  Value: '8'
      Named arguments:
   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'Boolean WrapNonExceptionThrows'
         Type: 'System.Boolean'  Value: 'True'
   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
      Constructor: 'Void .ctor(ExampleKind)'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '2'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the assembly.'

Attributes for type: 'Test'
   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
      Constructor: 'Void .ctor(ExampleKind, System.String[])'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '1'
         Array of 'System.String[]':
             Type: 'System.String'  Value: 'String array argument, line 1'
             Type: 'System.String'  Value: 'String array argument, line 2'
             Type: 'System.String'  Value: 'String array argument, line 3'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the class.'
         MemberInfo: 'Int32[] Numbers'
         Array of 'System.Int32[]':
             Type: 'System.Int32'  Value: '53'
             Type: 'System.Int32'  Value: '57'
             Type: 'System.Int32'  Value: '59'

Attributes for member: 'Void TestMethod(System.Object)'
   [ExampleAttribute(Note = "This is a note on a method.")]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on a method.'

Attributes for parameter: 'System.Object arg'
   [ExampleAttribute()]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
*/
Imports System.Reflection
Imports System.Collections.Generic
Imports System.Collections.ObjectModel

' The example attribute is applied to the assembly.
<Assembly:Example(ExampleKind.ThirdKind, Note:="This is a note on the assembly.")>

' An enumeration used by the ExampleAttribute class.
Public Enum ExampleKind
    FirstKind
    SecondKind
    ThirdKind
    FourthKind
End Enum

' An example attribute. The attribute can be applied to all
' targets, from assemblies to parameters.
'
<AttributeUsage(AttributeTargets.All)> _
Public Class ExampleAttribute
    Inherits Attribute

    ' Data for properties.
    Private kindValue As ExampleKind
    Private noteValue As String
    Private arrayStrings() As String
    Private arrayNumbers() As Integer

    ' Constructors. The parameterless constructor (.ctor) calls
    ' the constructor that specifies ExampleKind and an array of
    ' strings, and supplies the default values.
    '
    Public Sub New(ByVal initKind As ExampleKind, ByVal initStrings() As String)
        kindValue = initKind
        arrayStrings = initStrings
    End Sub
    Public Sub New(ByVal initKind As ExampleKind)
        Me.New(initKind, Nothing)
    End Sub
    Public Sub New()
        Me.New(ExampleKind.FirstKind, Nothing)
    End Sub

    ' Properties. The Note and Numbers properties must be read/write, so they 
    ' can be used as named parameters.
    '
    Public ReadOnly Property Kind As ExampleKind
        Get
            Return kindValue 
        End Get
    End Property
    Public ReadOnly Property Strings As String()
        Get
            Return arrayStrings 
        End Get
    End Property
    Public Property Note As String
        Get
            Return noteValue 
        End Get
        Set
            noteValue = value
        End Set
    End Property
    Public Property Numbers As Integer()
        Get
            Return arrayNumbers 
        End Get
        Set
            arrayNumbers = value
        End Set
    End Property
End Class

' The example attribute is applied to the test class.
'
<Example(ExampleKind.SecondKind, _
         New String() { "String array argument, line 1", _
                        "String array argument, line 2", _
                        "String array argument, line 3" }, _
         Note := "This is a note on the class.", _
         Numbers := New Integer() { 53, 57, 59 })> _
Public Class Test
    ' The example attribute is applied to a method, using the
    ' parameterless constructor and supplying a named argument.
    ' The attribute is also applied to the method parameter.
    '
    <Example(Note:="This is a note on a method.")> _
    Public Sub TestMethod(<Example()> ByVal arg As Object)
    End Sub

    ' Sub Main gets objects representing the assembly, the test
    ' type, the test method, and the method parameter. Custom
    ' attribute data is displayed for each of these.
    '
    Public Shared Sub Main()
        Dim asm As [Assembly] = Assembly.ReflectionOnlyLoad("source")
        Dim t As Type = asm.GetType("Test")
        Dim m As MethodInfo = t.GetMethod("TestMethod")
        Dim p() As ParameterInfo = m.GetParameters()

        Console.WriteLine(vbCrLf & "Attributes for assembly: '{0}'", asm)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm))
        Console.WriteLine(vbCrLf & "Attributes for type: '{0}'", t)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t))
        Console.WriteLine(vbCrLf & "Attributes for member: '{0}'", m)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m))
        Console.WriteLine(vbCrLf & "Attributes for parameter: '{0}'", p)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p(0)))
    End Sub

    Private Shared Sub ShowAttributeData( _
        ByVal attributes As IList(Of CustomAttributeData))

        For Each cad As CustomAttributeData _
            In CType(attributes, IEnumerable(Of CustomAttributeData))

            Console.WriteLine("   {0}", cad)
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor)

            Console.WriteLine("      Constructor arguments:")
            For Each cata As CustomAttributeTypedArgument _
                In CType(cad.ConstructorArguments, IEnumerable(Of CustomAttributeTypedArgument))

                ShowValueOrArray(cata)
            Next

            Console.WriteLine("      Named arguments:")
            For Each cana As CustomAttributeNamedArgument _
                In CType(cad.NamedArguments, IEnumerable(Of CustomAttributeNamedArgument))

                Console.WriteLine("         MemberInfo: '{0}'", _
                    cana.MemberInfo)
                ShowValueOrArray(cana.TypedValue)
            Next
        Next
    End Sub

    Private Shared Sub ShowValueOrArray(ByVal cata As CustomAttributeTypedArgument)
        If cata.Value.GetType() Is GetType(ReadOnlyCollection(Of CustomAttributeTypedArgument)) Then
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType)

            For Each cataElement As CustomAttributeTypedArgument In cata.Value
                Console.WriteLine("             Type: '{0}'  Value: '{1}'", _
                    cataElement.ArgumentType, cataElement.Value)
            Next
        Else
            Console.WriteLine("         Type: '{0}'  Value: '{1}'", _
                cata.ArgumentType, cata.Value)
        End If       
    End Sub
End Class

' This code example produces output similar to the following:
'
'Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
'   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
'      Constructor: 'Void .ctor(Int32)'
'      Constructor arguments:
'         Type: 'System.Int32'  Value: '8'
'      Named arguments:
'   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'Boolean WrapNonExceptionThrows'
'         Type: 'System.Boolean'  Value: 'True'
'   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
'      Constructor: 'Void .ctor(ExampleKind)'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '2'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the assembly.'
'
'Attributes for type: 'Test'
'   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
'      Constructor: 'Void .ctor(ExampleKind, System.String[])'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '1'
'         Array of 'System.String[]':
'             Type: 'System.String'  Value: 'String array argument, line 1'
'             Type: 'System.String'  Value: 'String array argument, line 2'
'             Type: 'System.String'  Value: 'String array argument, line 3'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the class.'
'         MemberInfo: 'Int32[] Numbers'
'         Array of 'System.Int32[]':
'             Type: 'System.Int32'  Value: '53'
'             Type: 'System.Int32'  Value: '57'
'             Type: 'System.Int32'  Value: '59'
'
'Attributes for member: 'Void TestMethod(System.Object)'
'   [ExampleAttribute(Note = "This is a note on a method.")]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on a method.'
'
'Attributes for parameter: 'System.Object arg'
'   [ExampleAttribute()]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:

Uwagi

Ta metoda stanowi alternatywę dla GetCustomAttributes metody, która zawsze może być używana w kontekście tylko odbicia.

Zobacz też

Dotyczy

GetCustomAttributes(MemberInfo)

Źródło:
CustomAttributeData.cs
Źródło:
CustomAttributeData.cs
Źródło:
CustomAttributeData.cs

Zwraca listę CustomAttributeData obiektów reprezentujących dane dotyczące atrybutów, które zostały zastosowane do elementu docelowego.

public:
 static System::Collections::Generic::IList<System::Reflection::CustomAttributeData ^> ^ GetCustomAttributes(System::Reflection::MemberInfo ^ target);
public static System.Collections.Generic.IList<System.Reflection.CustomAttributeData> GetCustomAttributes (System.Reflection.MemberInfo target);
static member GetCustomAttributes : System.Reflection.MemberInfo -> System.Collections.Generic.IList<System.Reflection.CustomAttributeData>
Public Shared Function GetCustomAttributes (target As MemberInfo) As IList(Of CustomAttributeData)

Parametry

target
MemberInfo

Element członkowski, którego dane atrybutu mają zostać pobrane.

Zwraca

Lista obiektów reprezentujących dane dotyczące atrybutów, które zostały zastosowane do elementu członkowskiego docelowego.

Wyjątki

target to null.

Przykłady

W poniższym przykładzie zdefiniowano atrybut niestandardowy z czterema konstruktorami i czterema właściwościami. Dwie właściwości są tylko do odczytu i są ustawiane przy użyciu parametrów pozycyjnych konstruktorów. Pozostałe dwie właściwości to odczyt/zapis i można je ustawić tylko przy użyciu nazwanych argumentów. Jedna właściwość pozycyjna jest tablicą ciągów, a jedna nazwana właściwość jest tablicą liczb całkowitych.

Atrybut jest stosowany do zestawu, do typu zadeklarowanego w zestawie, do metody typu i do parametru metody metody . W tych przypadkach są używane różne konstruktory. Po wykonaniu zestaw ładuje się do kontekstu tylko odbicia i wyświetla atrybuty niestandardowe.

Atrybut stosowany do typu demonstruje właściwości tablicy z argumentami zarówno pozycyjnymi, jak i nazwanymi.

Metoda GetCustomAttributes jest używana do Main() pobierania atrybutów niestandardowych, które zostały zastosowane do typu i do metody testowej (Type pochodzi z MemberInfometody ). Wartość zwracana GetCustomAttributes metody jest przekazywana ShowAttributeData do metody .

using namespace System;
using namespace System::Reflection;
using namespace System::Collections::Generic;
using namespace System::Collections::ObjectModel;

// An enumeration used by the ExampleAttribute class.
public enum class ExampleKind
{
   FirstKind, SecondKind, ThirdKind, FourthKind
};

// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets::All)]
public ref class ExampleAttribute: public Attribute
{
private:
   // Data for properties.
   ExampleKind kindValue;
   String^ noteValue;
   array<String^>^ arrayStrings;
   array<int>^ arrayNumbers;

   // Constructors. 
   void ExampleAttributeInitialize( ExampleKind initKind, array<String^>^ initStrings )
   {
      kindValue = initKind;
      arrayStrings = initStrings;
   }
public:
   ExampleAttribute()
   {
      ExampleAttributeInitialize( ExampleKind::FirstKind, nullptr );
   }
   ExampleAttribute( ExampleKind initKind )
   {
      ExampleAttributeInitialize( initKind, nullptr );
   }
   ExampleAttribute( ExampleKind initKind, array<String^>^ initStrings )
   {
      ExampleAttributeInitialize( initKind, initStrings );
   }

   // Properties. The Note and Numbers properties must be read/write, so they
   // can be used as named parameters.
   //
   property ExampleKind Kind 
   {
      ExampleKind get()
      {
         return kindValue;
      }
   }
   property array<String^>^ Strings
   {
      array<String^>^ get()
      {
         return arrayStrings;
      }
   }
   property String^ Note 
   {
      String^ get()
      {
         return noteValue;
      }

      void set( String^ value )
      {
         noteValue = value;
      }
   }
   property array<int>^ Numbers
   {
      array<int>^ get()
      {
         return arrayNumbers;
      }

      void set( array<int>^ value )
      {
         arrayNumbers = value;
      }
   }
};

// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind::ThirdKind,Note="This is a note on the assembly.")];

// The example attribute is applied to the test class.
//
[Example(ExampleKind::SecondKind, 
         gcnew array<String^> { "String array argument, line 1", 
                        "String array argument, line 2", 
                        "String array argument, line 3" }, 
         Note="This is a note on the class.",
         Numbers = gcnew array<int> { 53, 57, 59 })] 
public ref class Test
{
public:
   // The example attribute is applied to a method, using the
   // parameterless constructor and supplying a named argument.
   // The attribute is also applied to the method parameter.
   //
   [Example(Note="This is a note on a method.")]
   void TestMethod( [Example] Object^ arg ){}

   // Main() gets objects representing the assembly, the test
   // type, the test method, and the method parameter. Custom
   // attribute data is displayed for each of these.
   //
   static void Main()
   {
      Assembly^ assembly = Assembly::ReflectionOnlyLoad( "Source" );
      Type^ t = assembly->GetType( "Test" );
      MethodInfo^ m = t->GetMethod( "TestMethod" );
      array<ParameterInfo^>^p = m->GetParameters();

      Console::WriteLine( "\r\nAttributes for assembly: '{0}'", assembly );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( assembly ) );
      Console::WriteLine( "\r\nAttributes for type: '{0}'", t );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( t ) );
      Console::WriteLine( "\r\nAttributes for member: '{0}'", m );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( m ) );
      Console::WriteLine( "\r\nAttributes for parameter: '{0}'", p );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( p[ 0 ] ) );
   }

private:
    static void ShowValueOrArray(CustomAttributeTypedArgument^ cata)
    {
        if (cata->Value->GetType() == ReadOnlyCollection<CustomAttributeTypedArgument>::typeid)
        {
            Console::WriteLine("         Array of '{0}':", cata->ArgumentType);

            for each (CustomAttributeTypedArgument^ cataElement in 
                (ReadOnlyCollection<CustomAttributeTypedArgument>^) cata->Value)
            {
                Console::WriteLine("             Type: '{0}'  Value: '{1}'",
                    cataElement->ArgumentType, cataElement->Value);
            }
        }
        else
        {
            Console::WriteLine( "         Type: '{0}'  Value: '{1}'",
               cata->ArgumentType, cata->Value );
        }
    }

   static void ShowAttributeData( IList< CustomAttributeData^ >^ attributes )
   {
      for each ( CustomAttributeData^ cad in attributes )
      {
         Console::WriteLine( "   {0}", cad );
         Console::WriteLine( "      Constructor: '{0}'", cad->Constructor );

         Console::WriteLine( "      Constructor arguments:" );
         for each ( CustomAttributeTypedArgument^ cata in cad->ConstructorArguments )
         {
            ShowValueOrArray(cata);
         }

         Console::WriteLine( "      Named arguments:" );
         for each ( CustomAttributeNamedArgument cana in cad->NamedArguments )
         {
            Console::WriteLine( "         MemberInfo: '{0}'", cana.MemberInfo );
            ShowValueOrArray(cana.TypedValue);
         }
      }
   }
};

int main()
{
   Test::Main();
}

/* This code example produces output similar to the following:

Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
      Constructor: 'Void .ctor(Int32)'
      Constructor arguments:
         Type: 'System.Int32'  Value: '8'
      Named arguments:
   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'Boolean WrapNonExceptionThrows'
         Type: 'System.Boolean'  Value: 'True'
   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
      Constructor: 'Void .ctor(ExampleKind)'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '2'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the assembly.'

Attributes for type: 'Test'
   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
      Constructor: 'Void .ctor(ExampleKind, System.String[])'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '1'
         Array of 'System.String[]':
             Type: 'System.String'  Value: 'String array argument, line 1'
             Type: 'System.String'  Value: 'String array argument, line 2'
             Type: 'System.String'  Value: 'String array argument, line 3'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the class.'
         MemberInfo: 'Int32[] Numbers'
         Array of 'System.Int32[]':
             Type: 'System.Int32'  Value: '53'
             Type: 'System.Int32'  Value: '57'
             Type: 'System.Int32'  Value: '59'

Attributes for member: 'Void TestMethod(System.Object)'
   [ExampleAttribute(Note = "This is a note on a method.")]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on a method.'

Attributes for parameter: 'System.Object arg'
   [ExampleAttribute()]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
*/
using System;
using System.Reflection;
using System.Collections.Generic;
using System.Collections.ObjectModel;

// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind.ThirdKind, Note="This is a note on the assembly.")]

// An enumeration used by the ExampleAttribute class.
public enum ExampleKind
{
    FirstKind,
    SecondKind,
    ThirdKind,
    FourthKind
};

// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets.All)]
public class ExampleAttribute : Attribute
{
    // Data for properties.
    private ExampleKind kindValue;
    private string noteValue;
    private string[] arrayStrings;
    private int[] arrayNumbers;

    // Constructors. The parameterless constructor (.ctor) calls
    // the constructor that specifies ExampleKind and an array of
    // strings, and supplies the default values.
    //
    public ExampleAttribute(ExampleKind initKind, string[] initStrings)
    {
        kindValue = initKind;
        arrayStrings = initStrings;
    }
    public ExampleAttribute(ExampleKind initKind) : this(initKind, null) {}
    public ExampleAttribute() : this(ExampleKind.FirstKind, null) {}

    // Properties. The Note and Numbers properties must be read/write, so they
    // can be used as named parameters.
    //
    public ExampleKind Kind { get { return kindValue; }}
    public string[] Strings { get { return arrayStrings; }}
    public string Note
    {
        get { return noteValue; }
        set { noteValue = value; }
    }
    public int[] Numbers
    {
        get { return arrayNumbers; }
        set { arrayNumbers = value; }
    }
}

// The example attribute is applied to the test class.
//
[Example(ExampleKind.SecondKind,
         new string[] { "String array argument, line 1",
                        "String array argument, line 2",
                        "String array argument, line 3" },
         Note="This is a note on the class.",
         Numbers = new int[] { 53, 57, 59 })]
public class Test
{
    // The example attribute is applied to a method, using the
    // parameterless constructor and supplying a named argument.
    // The attribute is also applied to the method parameter.
    //
    [Example(Note="This is a note on a method.")]
    public void TestMethod([Example] object arg) { }

    // Main() gets objects representing the assembly, the test
    // type, the test method, and the method parameter. Custom
    // attribute data is displayed for each of these.
    //
    public static void Main()
    {
        Assembly asm = Assembly.ReflectionOnlyLoad("Source");
        Type t = asm.GetType("Test");
        MethodInfo m = t.GetMethod("TestMethod");
        ParameterInfo[] p = m.GetParameters();

        Console.WriteLine("\r\nAttributes for assembly: '{0}'", asm);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm));
        Console.WriteLine("\r\nAttributes for type: '{0}'", t);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t));
        Console.WriteLine("\r\nAttributes for member: '{0}'", m);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m));
        Console.WriteLine("\r\nAttributes for parameter: '{0}'", p);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p[0]));
    }

    private static void ShowAttributeData(
        IList<CustomAttributeData> attributes)
    {
        foreach( CustomAttributeData cad in attributes )
        {
            Console.WriteLine("   {0}", cad);
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor);

            Console.WriteLine("      Constructor arguments:");
            foreach( CustomAttributeTypedArgument cata
                in cad.ConstructorArguments )
            {
                ShowValueOrArray(cata);
            }

            Console.WriteLine("      Named arguments:");
            foreach( CustomAttributeNamedArgument cana
                in cad.NamedArguments )
            {
                Console.WriteLine("         MemberInfo: '{0}'",
                    cana.MemberInfo);
                ShowValueOrArray(cana.TypedValue);
            }
        }
    }

    private static void ShowValueOrArray(CustomAttributeTypedArgument cata)
    {
        if (cata.Value.GetType() == typeof(ReadOnlyCollection<CustomAttributeTypedArgument>))
        {
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType);

            foreach (CustomAttributeTypedArgument cataElement in
                (ReadOnlyCollection<CustomAttributeTypedArgument>) cata.Value)
            {
                Console.WriteLine("             Type: '{0}'  Value: '{1}'",
                    cataElement.ArgumentType, cataElement.Value);
            }
        }
        else
        {
            Console.WriteLine("         Type: '{0}'  Value: '{1}'",
                cata.ArgumentType, cata.Value);
        }
    }
}

/* This code example produces output similar to the following:

Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
      Constructor: 'Void .ctor(Int32)'
      Constructor arguments:
         Type: 'System.Int32'  Value: '8'
      Named arguments:
   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'Boolean WrapNonExceptionThrows'
         Type: 'System.Boolean'  Value: 'True'
   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
      Constructor: 'Void .ctor(ExampleKind)'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '2'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the assembly.'

Attributes for type: 'Test'
   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
      Constructor: 'Void .ctor(ExampleKind, System.String[])'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '1'
         Array of 'System.String[]':
             Type: 'System.String'  Value: 'String array argument, line 1'
             Type: 'System.String'  Value: 'String array argument, line 2'
             Type: 'System.String'  Value: 'String array argument, line 3'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the class.'
         MemberInfo: 'Int32[] Numbers'
         Array of 'System.Int32[]':
             Type: 'System.Int32'  Value: '53'
             Type: 'System.Int32'  Value: '57'
             Type: 'System.Int32'  Value: '59'

Attributes for member: 'Void TestMethod(System.Object)'
   [ExampleAttribute(Note = "This is a note on a method.")]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on a method.'

Attributes for parameter: 'System.Object arg'
   [ExampleAttribute()]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
*/
Imports System.Reflection
Imports System.Collections.Generic
Imports System.Collections.ObjectModel

' The example attribute is applied to the assembly.
<Assembly:Example(ExampleKind.ThirdKind, Note:="This is a note on the assembly.")>

' An enumeration used by the ExampleAttribute class.
Public Enum ExampleKind
    FirstKind
    SecondKind
    ThirdKind
    FourthKind
End Enum

' An example attribute. The attribute can be applied to all
' targets, from assemblies to parameters.
'
<AttributeUsage(AttributeTargets.All)> _
Public Class ExampleAttribute
    Inherits Attribute

    ' Data for properties.
    Private kindValue As ExampleKind
    Private noteValue As String
    Private arrayStrings() As String
    Private arrayNumbers() As Integer

    ' Constructors. The parameterless constructor (.ctor) calls
    ' the constructor that specifies ExampleKind and an array of
    ' strings, and supplies the default values.
    '
    Public Sub New(ByVal initKind As ExampleKind, ByVal initStrings() As String)
        kindValue = initKind
        arrayStrings = initStrings
    End Sub
    Public Sub New(ByVal initKind As ExampleKind)
        Me.New(initKind, Nothing)
    End Sub
    Public Sub New()
        Me.New(ExampleKind.FirstKind, Nothing)
    End Sub

    ' Properties. The Note and Numbers properties must be read/write, so they 
    ' can be used as named parameters.
    '
    Public ReadOnly Property Kind As ExampleKind
        Get
            Return kindValue 
        End Get
    End Property
    Public ReadOnly Property Strings As String()
        Get
            Return arrayStrings 
        End Get
    End Property
    Public Property Note As String
        Get
            Return noteValue 
        End Get
        Set
            noteValue = value
        End Set
    End Property
    Public Property Numbers As Integer()
        Get
            Return arrayNumbers 
        End Get
        Set
            arrayNumbers = value
        End Set
    End Property
End Class

' The example attribute is applied to the test class.
'
<Example(ExampleKind.SecondKind, _
         New String() { "String array argument, line 1", _
                        "String array argument, line 2", _
                        "String array argument, line 3" }, _
         Note := "This is a note on the class.", _
         Numbers := New Integer() { 53, 57, 59 })> _
Public Class Test
    ' The example attribute is applied to a method, using the
    ' parameterless constructor and supplying a named argument.
    ' The attribute is also applied to the method parameter.
    '
    <Example(Note:="This is a note on a method.")> _
    Public Sub TestMethod(<Example()> ByVal arg As Object)
    End Sub

    ' Sub Main gets objects representing the assembly, the test
    ' type, the test method, and the method parameter. Custom
    ' attribute data is displayed for each of these.
    '
    Public Shared Sub Main()
        Dim asm As [Assembly] = Assembly.ReflectionOnlyLoad("source")
        Dim t As Type = asm.GetType("Test")
        Dim m As MethodInfo = t.GetMethod("TestMethod")
        Dim p() As ParameterInfo = m.GetParameters()

        Console.WriteLine(vbCrLf & "Attributes for assembly: '{0}'", asm)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm))
        Console.WriteLine(vbCrLf & "Attributes for type: '{0}'", t)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t))
        Console.WriteLine(vbCrLf & "Attributes for member: '{0}'", m)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m))
        Console.WriteLine(vbCrLf & "Attributes for parameter: '{0}'", p)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p(0)))
    End Sub

    Private Shared Sub ShowAttributeData( _
        ByVal attributes As IList(Of CustomAttributeData))

        For Each cad As CustomAttributeData _
            In CType(attributes, IEnumerable(Of CustomAttributeData))

            Console.WriteLine("   {0}", cad)
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor)

            Console.WriteLine("      Constructor arguments:")
            For Each cata As CustomAttributeTypedArgument _
                In CType(cad.ConstructorArguments, IEnumerable(Of CustomAttributeTypedArgument))

                ShowValueOrArray(cata)
            Next

            Console.WriteLine("      Named arguments:")
            For Each cana As CustomAttributeNamedArgument _
                In CType(cad.NamedArguments, IEnumerable(Of CustomAttributeNamedArgument))

                Console.WriteLine("         MemberInfo: '{0}'", _
                    cana.MemberInfo)
                ShowValueOrArray(cana.TypedValue)
            Next
        Next
    End Sub

    Private Shared Sub ShowValueOrArray(ByVal cata As CustomAttributeTypedArgument)
        If cata.Value.GetType() Is GetType(ReadOnlyCollection(Of CustomAttributeTypedArgument)) Then
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType)

            For Each cataElement As CustomAttributeTypedArgument In cata.Value
                Console.WriteLine("             Type: '{0}'  Value: '{1}'", _
                    cataElement.ArgumentType, cataElement.Value)
            Next
        Else
            Console.WriteLine("         Type: '{0}'  Value: '{1}'", _
                cata.ArgumentType, cata.Value)
        End If       
    End Sub
End Class

' This code example produces output similar to the following:
'
'Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
'   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
'      Constructor: 'Void .ctor(Int32)'
'      Constructor arguments:
'         Type: 'System.Int32'  Value: '8'
'      Named arguments:
'   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'Boolean WrapNonExceptionThrows'
'         Type: 'System.Boolean'  Value: 'True'
'   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
'      Constructor: 'Void .ctor(ExampleKind)'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '2'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the assembly.'
'
'Attributes for type: 'Test'
'   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
'      Constructor: 'Void .ctor(ExampleKind, System.String[])'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '1'
'         Array of 'System.String[]':
'             Type: 'System.String'  Value: 'String array argument, line 1'
'             Type: 'System.String'  Value: 'String array argument, line 2'
'             Type: 'System.String'  Value: 'String array argument, line 3'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the class.'
'         MemberInfo: 'Int32[] Numbers'
'         Array of 'System.Int32[]':
'             Type: 'System.Int32'  Value: '53'
'             Type: 'System.Int32'  Value: '57'
'             Type: 'System.Int32'  Value: '59'
'
'Attributes for member: 'Void TestMethod(System.Object)'
'   [ExampleAttribute(Note = "This is a note on a method.")]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on a method.'
'
'Attributes for parameter: 'System.Object arg'
'   [ExampleAttribute()]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:

Uwagi

To przeciążenie metody pobiera dane atrybutów niestandardowych dla typów, typów zagnieżdżonych i składowych typów, ponieważ Type klasa i klasy w System.Reflection przestrzeni nazw reprezentujące składowe typu pochodzą z MemberInfoklasy .

Zobacz też

Dotyczy

GetCustomAttributes(Module)

Źródło:
CustomAttributeData.cs
Źródło:
CustomAttributeData.cs
Źródło:
CustomAttributeData.cs

Zwraca listę CustomAttributeData obiektów reprezentujących dane dotyczące atrybutów, które zostały zastosowane do modułu docelowego.

public:
 static System::Collections::Generic::IList<System::Reflection::CustomAttributeData ^> ^ GetCustomAttributes(System::Reflection::Module ^ target);
public static System.Collections.Generic.IList<System.Reflection.CustomAttributeData> GetCustomAttributes (System.Reflection.Module target);
static member GetCustomAttributes : System.Reflection.Module -> System.Collections.Generic.IList<System.Reflection.CustomAttributeData>
Public Shared Function GetCustomAttributes (target As Module) As IList(Of CustomAttributeData)

Parametry

target
Module

Moduł, którego dane atrybutu niestandardowego mają zostać pobrane.

Zwraca

Lista obiektów reprezentujących dane dotyczące atrybutów zastosowanych do modułu docelowego.

Wyjątki

target to null.

Dotyczy

GetCustomAttributes(ParameterInfo)

Źródło:
CustomAttributeData.cs
Źródło:
CustomAttributeData.cs
Źródło:
CustomAttributeData.cs

Zwraca listę CustomAttributeData obiektów reprezentujących dane dotyczące atrybutów, które zostały zastosowane do parametru docelowego.

public:
 static System::Collections::Generic::IList<System::Reflection::CustomAttributeData ^> ^ GetCustomAttributes(System::Reflection::ParameterInfo ^ target);
public static System.Collections.Generic.IList<System.Reflection.CustomAttributeData> GetCustomAttributes (System.Reflection.ParameterInfo target);
static member GetCustomAttributes : System.Reflection.ParameterInfo -> System.Collections.Generic.IList<System.Reflection.CustomAttributeData>
Public Shared Function GetCustomAttributes (target As ParameterInfo) As IList(Of CustomAttributeData)

Parametry

target
ParameterInfo

Parametr, którego dane atrybutu mają być pobierane.

Zwraca

Lista obiektów reprezentujących dane dotyczące atrybutów, które zostały zastosowane do parametru docelowego.

Wyjątki

target to null.

Przykłady

W poniższym przykładzie zdefiniowano atrybut niestandardowy z czterema konstruktorami i czterema właściwościami. Dwie właściwości są tylko do odczytu i są ustawiane przy użyciu parametrów pozycyjnych konstruktorów. Pozostałe dwie właściwości to odczyt/zapis i można je ustawić tylko przy użyciu nazwanych argumentów. Jedna właściwość pozycyjna jest tablicą ciągów, a jedna nazwana właściwość jest tablicą liczb całkowitych.

Atrybut jest stosowany do zestawu, do typu zadeklarowanego w zestawie, do metody typu i do parametru metody metody . W tych przypadkach są używane różne konstruktory. Po wykonaniu zestaw ładuje się do kontekstu tylko odbicia i wyświetla atrybuty niestandardowe.

Atrybut stosowany do typu demonstruje właściwości tablicy z argumentami zarówno pozycyjnymi, jak i nazwanymi.

Metoda GetCustomAttributes jest używana do Main() pobierania atrybutów niestandardowych zastosowanych do parametru metody testowej. Wartość zwracana GetCustomAttributes metody jest przekazywana ShowAttributeData do metody .

using namespace System;
using namespace System::Reflection;
using namespace System::Collections::Generic;
using namespace System::Collections::ObjectModel;

// An enumeration used by the ExampleAttribute class.
public enum class ExampleKind
{
   FirstKind, SecondKind, ThirdKind, FourthKind
};

// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets::All)]
public ref class ExampleAttribute: public Attribute
{
private:
   // Data for properties.
   ExampleKind kindValue;
   String^ noteValue;
   array<String^>^ arrayStrings;
   array<int>^ arrayNumbers;

   // Constructors. 
   void ExampleAttributeInitialize( ExampleKind initKind, array<String^>^ initStrings )
   {
      kindValue = initKind;
      arrayStrings = initStrings;
   }
public:
   ExampleAttribute()
   {
      ExampleAttributeInitialize( ExampleKind::FirstKind, nullptr );
   }
   ExampleAttribute( ExampleKind initKind )
   {
      ExampleAttributeInitialize( initKind, nullptr );
   }
   ExampleAttribute( ExampleKind initKind, array<String^>^ initStrings )
   {
      ExampleAttributeInitialize( initKind, initStrings );
   }

   // Properties. The Note and Numbers properties must be read/write, so they
   // can be used as named parameters.
   //
   property ExampleKind Kind 
   {
      ExampleKind get()
      {
         return kindValue;
      }
   }
   property array<String^>^ Strings
   {
      array<String^>^ get()
      {
         return arrayStrings;
      }
   }
   property String^ Note 
   {
      String^ get()
      {
         return noteValue;
      }

      void set( String^ value )
      {
         noteValue = value;
      }
   }
   property array<int>^ Numbers
   {
      array<int>^ get()
      {
         return arrayNumbers;
      }

      void set( array<int>^ value )
      {
         arrayNumbers = value;
      }
   }
};

// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind::ThirdKind,Note="This is a note on the assembly.")];

// The example attribute is applied to the test class.
//
[Example(ExampleKind::SecondKind, 
         gcnew array<String^> { "String array argument, line 1", 
                        "String array argument, line 2", 
                        "String array argument, line 3" }, 
         Note="This is a note on the class.",
         Numbers = gcnew array<int> { 53, 57, 59 })] 
public ref class Test
{
public:
   // The example attribute is applied to a method, using the
   // parameterless constructor and supplying a named argument.
   // The attribute is also applied to the method parameter.
   //
   [Example(Note="This is a note on a method.")]
   void TestMethod( [Example] Object^ arg ){}

   // Main() gets objects representing the assembly, the test
   // type, the test method, and the method parameter. Custom
   // attribute data is displayed for each of these.
   //
   static void Main()
   {
      Assembly^ assembly = Assembly::ReflectionOnlyLoad( "Source" );
      Type^ t = assembly->GetType( "Test" );
      MethodInfo^ m = t->GetMethod( "TestMethod" );
      array<ParameterInfo^>^p = m->GetParameters();

      Console::WriteLine( "\r\nAttributes for assembly: '{0}'", assembly );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( assembly ) );
      Console::WriteLine( "\r\nAttributes for type: '{0}'", t );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( t ) );
      Console::WriteLine( "\r\nAttributes for member: '{0}'", m );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( m ) );
      Console::WriteLine( "\r\nAttributes for parameter: '{0}'", p );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( p[ 0 ] ) );
   }

private:
    static void ShowValueOrArray(CustomAttributeTypedArgument^ cata)
    {
        if (cata->Value->GetType() == ReadOnlyCollection<CustomAttributeTypedArgument>::typeid)
        {
            Console::WriteLine("         Array of '{0}':", cata->ArgumentType);

            for each (CustomAttributeTypedArgument^ cataElement in 
                (ReadOnlyCollection<CustomAttributeTypedArgument>^) cata->Value)
            {
                Console::WriteLine("             Type: '{0}'  Value: '{1}'",
                    cataElement->ArgumentType, cataElement->Value);
            }
        }
        else
        {
            Console::WriteLine( "         Type: '{0}'  Value: '{1}'",
               cata->ArgumentType, cata->Value );
        }
    }

   static void ShowAttributeData( IList< CustomAttributeData^ >^ attributes )
   {
      for each ( CustomAttributeData^ cad in attributes )
      {
         Console::WriteLine( "   {0}", cad );
         Console::WriteLine( "      Constructor: '{0}'", cad->Constructor );

         Console::WriteLine( "      Constructor arguments:" );
         for each ( CustomAttributeTypedArgument^ cata in cad->ConstructorArguments )
         {
            ShowValueOrArray(cata);
         }

         Console::WriteLine( "      Named arguments:" );
         for each ( CustomAttributeNamedArgument cana in cad->NamedArguments )
         {
            Console::WriteLine( "         MemberInfo: '{0}'", cana.MemberInfo );
            ShowValueOrArray(cana.TypedValue);
         }
      }
   }
};

int main()
{
   Test::Main();
}

/* This code example produces output similar to the following:

Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
      Constructor: 'Void .ctor(Int32)'
      Constructor arguments:
         Type: 'System.Int32'  Value: '8'
      Named arguments:
   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'Boolean WrapNonExceptionThrows'
         Type: 'System.Boolean'  Value: 'True'
   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
      Constructor: 'Void .ctor(ExampleKind)'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '2'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the assembly.'

Attributes for type: 'Test'
   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
      Constructor: 'Void .ctor(ExampleKind, System.String[])'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '1'
         Array of 'System.String[]':
             Type: 'System.String'  Value: 'String array argument, line 1'
             Type: 'System.String'  Value: 'String array argument, line 2'
             Type: 'System.String'  Value: 'String array argument, line 3'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the class.'
         MemberInfo: 'Int32[] Numbers'
         Array of 'System.Int32[]':
             Type: 'System.Int32'  Value: '53'
             Type: 'System.Int32'  Value: '57'
             Type: 'System.Int32'  Value: '59'

Attributes for member: 'Void TestMethod(System.Object)'
   [ExampleAttribute(Note = "This is a note on a method.")]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on a method.'

Attributes for parameter: 'System.Object arg'
   [ExampleAttribute()]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
*/
using System;
using System.Reflection;
using System.Collections.Generic;
using System.Collections.ObjectModel;

// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind.ThirdKind, Note="This is a note on the assembly.")]

// An enumeration used by the ExampleAttribute class.
public enum ExampleKind
{
    FirstKind,
    SecondKind,
    ThirdKind,
    FourthKind
};

// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets.All)]
public class ExampleAttribute : Attribute
{
    // Data for properties.
    private ExampleKind kindValue;
    private string noteValue;
    private string[] arrayStrings;
    private int[] arrayNumbers;

    // Constructors. The parameterless constructor (.ctor) calls
    // the constructor that specifies ExampleKind and an array of
    // strings, and supplies the default values.
    //
    public ExampleAttribute(ExampleKind initKind, string[] initStrings)
    {
        kindValue = initKind;
        arrayStrings = initStrings;
    }
    public ExampleAttribute(ExampleKind initKind) : this(initKind, null) {}
    public ExampleAttribute() : this(ExampleKind.FirstKind, null) {}

    // Properties. The Note and Numbers properties must be read/write, so they
    // can be used as named parameters.
    //
    public ExampleKind Kind { get { return kindValue; }}
    public string[] Strings { get { return arrayStrings; }}
    public string Note
    {
        get { return noteValue; }
        set { noteValue = value; }
    }
    public int[] Numbers
    {
        get { return arrayNumbers; }
        set { arrayNumbers = value; }
    }
}

// The example attribute is applied to the test class.
//
[Example(ExampleKind.SecondKind,
         new string[] { "String array argument, line 1",
                        "String array argument, line 2",
                        "String array argument, line 3" },
         Note="This is a note on the class.",
         Numbers = new int[] { 53, 57, 59 })]
public class Test
{
    // The example attribute is applied to a method, using the
    // parameterless constructor and supplying a named argument.
    // The attribute is also applied to the method parameter.
    //
    [Example(Note="This is a note on a method.")]
    public void TestMethod([Example] object arg) { }

    // Main() gets objects representing the assembly, the test
    // type, the test method, and the method parameter. Custom
    // attribute data is displayed for each of these.
    //
    public static void Main()
    {
        Assembly asm = Assembly.ReflectionOnlyLoad("Source");
        Type t = asm.GetType("Test");
        MethodInfo m = t.GetMethod("TestMethod");
        ParameterInfo[] p = m.GetParameters();

        Console.WriteLine("\r\nAttributes for assembly: '{0}'", asm);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm));
        Console.WriteLine("\r\nAttributes for type: '{0}'", t);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t));
        Console.WriteLine("\r\nAttributes for member: '{0}'", m);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m));
        Console.WriteLine("\r\nAttributes for parameter: '{0}'", p);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p[0]));
    }

    private static void ShowAttributeData(
        IList<CustomAttributeData> attributes)
    {
        foreach( CustomAttributeData cad in attributes )
        {
            Console.WriteLine("   {0}", cad);
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor);

            Console.WriteLine("      Constructor arguments:");
            foreach( CustomAttributeTypedArgument cata
                in cad.ConstructorArguments )
            {
                ShowValueOrArray(cata);
            }

            Console.WriteLine("      Named arguments:");
            foreach( CustomAttributeNamedArgument cana
                in cad.NamedArguments )
            {
                Console.WriteLine("         MemberInfo: '{0}'",
                    cana.MemberInfo);
                ShowValueOrArray(cana.TypedValue);
            }
        }
    }

    private static void ShowValueOrArray(CustomAttributeTypedArgument cata)
    {
        if (cata.Value.GetType() == typeof(ReadOnlyCollection<CustomAttributeTypedArgument>))
        {
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType);

            foreach (CustomAttributeTypedArgument cataElement in
                (ReadOnlyCollection<CustomAttributeTypedArgument>) cata.Value)
            {
                Console.WriteLine("             Type: '{0}'  Value: '{1}'",
                    cataElement.ArgumentType, cataElement.Value);
            }
        }
        else
        {
            Console.WriteLine("         Type: '{0}'  Value: '{1}'",
                cata.ArgumentType, cata.Value);
        }
    }
}

/* This code example produces output similar to the following:

Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
      Constructor: 'Void .ctor(Int32)'
      Constructor arguments:
         Type: 'System.Int32'  Value: '8'
      Named arguments:
   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'Boolean WrapNonExceptionThrows'
         Type: 'System.Boolean'  Value: 'True'
   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
      Constructor: 'Void .ctor(ExampleKind)'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '2'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the assembly.'

Attributes for type: 'Test'
   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
      Constructor: 'Void .ctor(ExampleKind, System.String[])'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '1'
         Array of 'System.String[]':
             Type: 'System.String'  Value: 'String array argument, line 1'
             Type: 'System.String'  Value: 'String array argument, line 2'
             Type: 'System.String'  Value: 'String array argument, line 3'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the class.'
         MemberInfo: 'Int32[] Numbers'
         Array of 'System.Int32[]':
             Type: 'System.Int32'  Value: '53'
             Type: 'System.Int32'  Value: '57'
             Type: 'System.Int32'  Value: '59'

Attributes for member: 'Void TestMethod(System.Object)'
   [ExampleAttribute(Note = "This is a note on a method.")]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on a method.'

Attributes for parameter: 'System.Object arg'
   [ExampleAttribute()]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
*/
Imports System.Reflection
Imports System.Collections.Generic
Imports System.Collections.ObjectModel

' The example attribute is applied to the assembly.
<Assembly:Example(ExampleKind.ThirdKind, Note:="This is a note on the assembly.")>

' An enumeration used by the ExampleAttribute class.
Public Enum ExampleKind
    FirstKind
    SecondKind
    ThirdKind
    FourthKind
End Enum

' An example attribute. The attribute can be applied to all
' targets, from assemblies to parameters.
'
<AttributeUsage(AttributeTargets.All)> _
Public Class ExampleAttribute
    Inherits Attribute

    ' Data for properties.
    Private kindValue As ExampleKind
    Private noteValue As String
    Private arrayStrings() As String
    Private arrayNumbers() As Integer

    ' Constructors. The parameterless constructor (.ctor) calls
    ' the constructor that specifies ExampleKind and an array of
    ' strings, and supplies the default values.
    '
    Public Sub New(ByVal initKind As ExampleKind, ByVal initStrings() As String)
        kindValue = initKind
        arrayStrings = initStrings
    End Sub
    Public Sub New(ByVal initKind As ExampleKind)
        Me.New(initKind, Nothing)
    End Sub
    Public Sub New()
        Me.New(ExampleKind.FirstKind, Nothing)
    End Sub

    ' Properties. The Note and Numbers properties must be read/write, so they 
    ' can be used as named parameters.
    '
    Public ReadOnly Property Kind As ExampleKind
        Get
            Return kindValue 
        End Get
    End Property
    Public ReadOnly Property Strings As String()
        Get
            Return arrayStrings 
        End Get
    End Property
    Public Property Note As String
        Get
            Return noteValue 
        End Get
        Set
            noteValue = value
        End Set
    End Property
    Public Property Numbers As Integer()
        Get
            Return arrayNumbers 
        End Get
        Set
            arrayNumbers = value
        End Set
    End Property
End Class

' The example attribute is applied to the test class.
'
<Example(ExampleKind.SecondKind, _
         New String() { "String array argument, line 1", _
                        "String array argument, line 2", _
                        "String array argument, line 3" }, _
         Note := "This is a note on the class.", _
         Numbers := New Integer() { 53, 57, 59 })> _
Public Class Test
    ' The example attribute is applied to a method, using the
    ' parameterless constructor and supplying a named argument.
    ' The attribute is also applied to the method parameter.
    '
    <Example(Note:="This is a note on a method.")> _
    Public Sub TestMethod(<Example()> ByVal arg As Object)
    End Sub

    ' Sub Main gets objects representing the assembly, the test
    ' type, the test method, and the method parameter. Custom
    ' attribute data is displayed for each of these.
    '
    Public Shared Sub Main()
        Dim asm As [Assembly] = Assembly.ReflectionOnlyLoad("source")
        Dim t As Type = asm.GetType("Test")
        Dim m As MethodInfo = t.GetMethod("TestMethod")
        Dim p() As ParameterInfo = m.GetParameters()

        Console.WriteLine(vbCrLf & "Attributes for assembly: '{0}'", asm)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm))
        Console.WriteLine(vbCrLf & "Attributes for type: '{0}'", t)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t))
        Console.WriteLine(vbCrLf & "Attributes for member: '{0}'", m)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m))
        Console.WriteLine(vbCrLf & "Attributes for parameter: '{0}'", p)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p(0)))
    End Sub

    Private Shared Sub ShowAttributeData( _
        ByVal attributes As IList(Of CustomAttributeData))

        For Each cad As CustomAttributeData _
            In CType(attributes, IEnumerable(Of CustomAttributeData))

            Console.WriteLine("   {0}", cad)
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor)

            Console.WriteLine("      Constructor arguments:")
            For Each cata As CustomAttributeTypedArgument _
                In CType(cad.ConstructorArguments, IEnumerable(Of CustomAttributeTypedArgument))

                ShowValueOrArray(cata)
            Next

            Console.WriteLine("      Named arguments:")
            For Each cana As CustomAttributeNamedArgument _
                In CType(cad.NamedArguments, IEnumerable(Of CustomAttributeNamedArgument))

                Console.WriteLine("         MemberInfo: '{0}'", _
                    cana.MemberInfo)
                ShowValueOrArray(cana.TypedValue)
            Next
        Next
    End Sub

    Private Shared Sub ShowValueOrArray(ByVal cata As CustomAttributeTypedArgument)
        If cata.Value.GetType() Is GetType(ReadOnlyCollection(Of CustomAttributeTypedArgument)) Then
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType)

            For Each cataElement As CustomAttributeTypedArgument In cata.Value
                Console.WriteLine("             Type: '{0}'  Value: '{1}'", _
                    cataElement.ArgumentType, cataElement.Value)
            Next
        Else
            Console.WriteLine("         Type: '{0}'  Value: '{1}'", _
                cata.ArgumentType, cata.Value)
        End If       
    End Sub
End Class

' This code example produces output similar to the following:
'
'Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
'   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
'      Constructor: 'Void .ctor(Int32)'
'      Constructor arguments:
'         Type: 'System.Int32'  Value: '8'
'      Named arguments:
'   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'Boolean WrapNonExceptionThrows'
'         Type: 'System.Boolean'  Value: 'True'
'   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
'      Constructor: 'Void .ctor(ExampleKind)'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '2'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the assembly.'
'
'Attributes for type: 'Test'
'   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
'      Constructor: 'Void .ctor(ExampleKind, System.String[])'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '1'
'         Array of 'System.String[]':
'             Type: 'System.String'  Value: 'String array argument, line 1'
'             Type: 'System.String'  Value: 'String array argument, line 2'
'             Type: 'System.String'  Value: 'String array argument, line 3'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the class.'
'         MemberInfo: 'Int32[] Numbers'
'         Array of 'System.Int32[]':
'             Type: 'System.Int32'  Value: '53'
'             Type: 'System.Int32'  Value: '57'
'             Type: 'System.Int32'  Value: '59'
'
'Attributes for member: 'Void TestMethod(System.Object)'
'   [ExampleAttribute(Note = "This is a note on a method.")]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on a method.'
'
'Attributes for parameter: 'System.Object arg'
'   [ExampleAttribute()]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:

Uwagi

Ta metoda stanowi alternatywę dla GetCustomAttributes metody, która zawsze może być używana w kontekście tylko odbicia.

Zobacz też

Dotyczy