Microsoft Security Bulletin MS01-051 - Critical
Malformed Dotless IP Address Can Cause Web Page to be Handled in Intranet Zone
Published: October 10, 2001 | Updated: June 13, 2003
Originally posted: October 10, 2001
Updated: June 13, 2003
Who should read this bulletin:
Customers using Microsoft® Internet Explorer
Impact of vulnerabilities:
- Cause web page to render a web page using inappropriate security settings
- Send commands to a third-party web site in the guise of the user
- Create a file on the system of a user who visited a web site.
Customers should consider applying the patch.
- Microsoft Internet Explorer 5.01
- Microsoft Internet Explorer 5.5
- Microsoft Internet Explorer 6
This patch eliminates three vulnerabilities affecting Internet Explorer. The first involves how IE handles URLs that include dotless IP addresses. If a web site were specified using a dotless IP format (e.g., http://031713501415 rather than http://18.104.22.168), and the request were malformed in a particular way, IE would not recognize that the site was an Internet site. Instead, it would treat the site as an intranet site, and open pages on the site in the Intranet Zone rather than the correct zone. This would allow the site to run with fewer security restrictions than appropriate. This vulnerability does not affect IE 6.
The second involves how IE handles URLs that specify third-party sites. By encoding an URL in a particular way, it would be possible for an attacker to include HTTP requests that would be sent to the site as soon as a connection had been established. These requests would appear to have originated from the user. In most cases, this would only allow the attacker to send the user to a site and request a page on it. However, if exploited against a web-based service (e.g., a web-based mail service), it could be possible for the attacker to take action on the user's behalf, including sending a request to delete data.
The third is a new variant of a vulnerability discussed in Microsoft Security Bulletin MS01-015, affecting how Telnet sessions are invoked via IE. By design, telnet sessions can be launched via IE. However, a vulnerability exists because when doing so, IE will start Telnet using any command-line options the web site specifies. This only becomes a concern when using the version of the Telnet client that installs as part of Services for Unix (SFU) 2.0 on Windows NT® 4.0 or Windows® 2000 machines. The version of the Telnet client in SFU 2.0 provides an option for creating a verbatim transcript of a Telnet session. An attacker could start a session using the logging option, then stream an executable file onto the user's system in a location that would cause it to be executed automatically the next time the user booted the machine. The flaw does not lie in the Telnet client, but in IE, which should not allow Telnet to be started remotely with command-line arguments.
Zone Spoofing vulnerability:
- The default settings in the Intranet Zone differ in only a few ways from those of the Internet Zone. The differences are enumerated in the FAQ, but none would allow destructive action to be taken.
HTTP Request Encoding vulnerability:
- In order to exploit this vulnerability successfully, the attacker would need to possess significant personal information about the victim, such as what web services the user subscribed to, folder structures, and so forth.
- Even if the attacker knew the requisite personal information, factors outside of the attacker's control (such as whether the user was logged onto the service already) could cause the user to see prompts and dialogues that would indicate that an attack was underway.
- It is unlikely that the vulnerability could be used to target large populations; it is likely that it could be used only against specific targets.
New variant of Telnet Invocation vulnerability:
- This vulnerability is only a concern for customers who are using the Telnet client that ships as part of Services for Unix 2.0. No other versions of Telnet contain the command-line feature to create log files, including the versions that ship by default as part of Windows platforms.
- Zone Spoofing vulnerability: CAN-2001-0664
- HTTP Request Encoding vulnerability: CAN-2001-0665
- New variant of Telnet Invocation vulnerability: CAN-2001-0667
The following table indicates which of the currently supported versions of Internet Explorer are affected by the vulnerabilities. Versions of IE prior to 5.01 Service Pack 2 are no longer eligible for hotfix support. IE 5.01 SP2 is supported only via Windows® 2000 Service Packs and Security Roll-up Packages.
|IE 5.01 SP2||IE 5.5 SP1||IE 5.5 SP2||IE 6.0|
|Zone Spoofing vulnerability:||Yes||Yes||Yes||No|
|HTTP Request Encoding vulnerability:||Yes||Yes||Yes||Yes|
|New variant of Telnet Invocation vulnerability:||Yes||Yes||Yes||Yes|
Frequently asked questions
What are the vulnerabilities discussed in this bulletin?
What are the vulnerabilities discussed in this bulletin? This bulletin discusses three vulnerabilities:
- A vulnerability that could enable a web site to render with less-restrictive security settings than are appropriate.
- A vulnerability that could enable an attacker to send a user to a third-party web site and send commands to it in the guise of the user.
- A new variant of a previously reported vulnerability that could enable an attacker to write files onto a user's computer via Telnet.
What's the scope of the first vulnerability?
This vulnerability could allow a web site to take actions that it should not be able to take on visiting users' systems. Specifically, it could allow the web site to trick IE into treating it as though it was located on the user's intranet, thereby gaining the ability to use less-restrictive security settings than are appropriate. A user could be affected by this vulnerability either by surfing to an attacker's web site or opening an HTML mail from an attacker. If the security settings were left in their defaults, the additional privileges the web site would gain still wouldn't allow it to take any destructive action. The greater danger from this vulnerability would arise in the case where the user had give intranet sites additional latitude. IE 6 is not affected by the vulnerability.
What causes the vulnerability?
The vulnerability results because it's possible to refer to a web using a particular type of dotless IP address, with the result that IE handles the site in the Local Intranet Zone rather than the correct one.
What's a dotless IP address?
Internet addresses are typically provided using a "dotted" address format. For instance, the address of the Microsoft web site in dotted format is http://22.214.171.124. However, it's possible to use other formats. For instance, you could also use a "dotless" format, in which the bit sequence corresponding to the dotted address is treated as a numerical value. For instance, the Microsoft web site's address could be rendered as http://031713501415. These are equivalent representations, and both are valid ways to refer to the web site. A vulnerability occurs because, if an Internet address is provided in dotless form and is malformed in particular way, IE uses the wrong Security Zone to process the web pages at the site.
What are Security Zones?
Security Zones are a feature in Internet Explorer that lets you regulate what actions web sites can take on your computer. All web content is categorized into one of five Security Zones:
- The Restricted Sites Zone, which contains any sites you've designated as being untrustworthy.
- The Trusted Sites Zone, which contains any sites you've designated as being trustworthy.
- The Internet Zone, which contains all Internet sites that aren't in either the Restricted Sites or Trusted Sites zones.
- The Intranet Zone, which contains all web sites within a local intranet. You can't add sites to this zone; instead, IE determines whether a site belongs in this zone by its IP address
- The Local Computer Zone, which contains all web content on your computer. Like the Intranet Zone, you can't add sites to this zone; IE determines whether content is on the local computer or not.
Each zone has a set of security settings associated with it, and these determine the latitudes that sites in that zone will be given. In addition, the security settings for each zone can be customized according to the user's preferences.
What's wrong with the way IE handles zone information?
If a web site's Internet address is provided using an unusual variation of a dotless IP address, IE will treat the site as though it was in the Intranet Zone rather than the zone it actually belongs to. This would allow the site to operate with the less-restrictive security settings of the Intranet Zone.
What could an attacker do using this vulnerability?
An attacker could exploit this vulnerability to make a web site on the Internet render using the lowered security settings associated with the Intranet zone. The specific actions the web site could take would vary, depending on whether the user had customized the security settings in the Intranet Zone. The default settings would not allow any destructive action; however, many users customize the Intranet Zone and give intranet sites considerable latitude.
What are the differences between the default settings for the Intranet Zone and the Internet Zone?
Here are the settings that differ by default in the two zones:
- Java permissions. This setting defaults to "medium" in the Intranet Zone, but "high" in the Internet Zone
- Access data sources across domains. This is set to "prompt" in the Intranet Zone, but "disable" in the Internet zone.
- Don't prompt for certificate selection when no certificate or only one certificate exists. This is set to "enable" in the Intranet Zone, but "disable" in the Internet Zone.
How might an attacker exploit the vulnerability?
There are two ways the attacker might try to exploit the vulnerability:
- By persuading or coercing a user into visiting a web site that uses the vulnerability to open one of its pages in the Intranet Zone.
- By sending an HTML mail to the user that, when opened, would open a web page in the Intranet Zone
Could this vulnerability be exploited accidentally?
No. Few sites actually use dotless IP addressing, and it would be very unlikely for even such a site to use the specific type of malformed dotless IP addressing at issue here.
Does this vulnerability affect IE 6?
No. However, IE 6 customers should consider applying the patch anyway, as it also eliminates two vulnerabilities that do affect IE 6.
What does the patch do?
The patch eliminates the vulnerability by causing IE to correctly identify a web site's Zone, even if it uses the form of dotless IP addressing discussed here.
What's the scope of the second vulnerability?
This vulnerability could enable an attacker to send a user to third-party site, and include commands that, to the third-party site, would appear to have come from the user. The precise actions that could be taken via these commands would vary from site to site, but one example of a potential action would be to send a user to her web-base mail service with a command to delete her mail. It is unlikely that this vulnerability could be used in any widespread attack, as exploiting it would require detailed knowledge of the web services the user uses, and would likely require information that was specific to the user. However, it could be damaging if targeted against a selected user.
What causes the vulnerability?
The vulnerability results because it is possible to create an URL that specifies the domain name of a third-party site and a series of HTTP requests. Upon processing such an URL, IE would establish a connection with the third-party site, and then send the commands as though they had originated from the user.
What are HTTP requests?
HTTP (Hypertext Transfer Protocol) is the industry-standard protocol by which data is exchanged between web sites and machines that visit them. HTTP requests are commands to a web server - to, for instance, request a web page or ask the server to take some action for the visiting user.
What's wrong with the way IE handles HTTP requests?
The problem in this case is that if a reference to a web site were coded in a particular way, IE could be made to send one or more HTTP requests to the site as soon as the connection were established.
How could an attacker exploit this vulnerability?
An attacker could embed a link in either a web page or an HTML mail that, when clicked, would take the user to a site of the attacker's choosing and send commands to it in the guise of the user.
What would this enable an attacker to do?
In most cases, it would allow the attacker to do very little. Most web sites only serve content. Exploiting this vulnerability in such a case would only allow the attacker to send the user to a particular site and request a particular page. However, the situation could be different if the user subscribed to a web-based service of some kind, such as a web-based email service. In such a case, it could be possible for the attacker to encode commands that would, for instance, delete the user's mail. However, such an attack would likely be difficult to carry out.
Why would it be difficult to carry out such an attack?
First, it would require a great deal of specific knowledge about the victim. For instance, consider what would be required in order to delete a user's mail on a web-based mail service. The attacker would need to know what mail service the user subscribed to, and might possibly need to know the server name. The attacker also might need to know details such as the names of the user's mail folders. Second, unless the timing was precise, the user might be presented with dialogues and other information that would serve as a clue that something was amiss. Again considering a case in which the attacker wanted to delete another user's mail, it's likely that the user, unless already logged into the service at the time, would see a login prompt. Also, depending on the mail service, the user might get a confirmation prompt before the folders would be deleted.
Does this mean the vulnerability doesn't pose a risk?
No. What this means is that it's unlikely that this vulnerability could be used to attack a large population of users. However, an attacker who was targeting one particular person might be able to use it effectively.
What does the patch do?
The patch prevents HTTP requests from being appended to domain names in URLs.
What's the scope of the new variant of the Telnet vulnerability?
It's exactly the same as the original variant, which we discussed in Microsoft Security Bulletin MS01-015, and could enable an attacker to write files onto the system of a user who either visited the attacker's web site, or who opened a specially-formatted HTML mail the attacker sent. The attacker could use the vulnerability to carry out a variety of attacks, the most serious of which would enable him to place a program onto the user's system, which could then be made to run automatically each time the user logged on. As in the original variant, the vulnerability could only be exploited if a particular version of the Telnet utility were installed on the system. This version is only available as part of a separate add-on package that can only be installed on Windows NT 4.0 and Windows 2000 systems. It does not ship by default as part of any platform.
Are there any differences at all between the original variant and the new one?
The only difference lies in the specific Telnet option that the attacker might use to exploit the vulnerability. In all other respects, this is exactly the same vulnerability as the one we discussed in MS01-015.
Security Bulletin MS01-015 says that this only affects customers who are using the Telnet client in Services for Unix 2.0. Is this also true of the new variant?
Yes. You could only be affected by this vulnerability if you've loaded the Telnet client from the Services for Unix 2.0 add-on package. If you are using the default Telnet client, you cannot be affected by the vulnerability.
Does the new patch eliminate both the new and original variants of the vulnerability?
No. However, the versions of IE that the patch can be installed on (IE 5.01 SP2, IE 5.5 SP2, and IE 6) already contain the fix for the original variant. As a result, if you apply the patch, you're fully protected against all variants of the vulnerability.
Download locations for this patch
Additional information about this patch
- The IE 5.01 patch can be installed on IE 5.01 Service Pack 2.
- The IE 5.5 patch can be installed on IE 5.5 Service Pack 2.
- The IE 6 patch can be installed on IE 6 Gold.
Inclusion in future service packs:
The fix for this issue will be included in IE 5.01 Service Pack 3, IE 5.5 Service Pack 3, and IE 6 Service Pack 1.
Reboot needed: Yes.
None. However, as discussed in the FAQ, applying the patch does ensure protection against the original Telnet Invocation vulnerability discussed in Microsoft Security Bulletin MS01-015.
Verifying patch installation:
- To verify that the patch has been installed on the machine, open IE, select Help, then select About Internet Explorer and confirm that Q306121 is listed in the Update Versions field.
- To verify the individual files, use the patch manifest provided in Knowledge Base articles Q306121 or Q308414.
Localized versions of this patch are available at the locations discussed in "Patch Availability".
Obtaining other security patches:
Patches for other security issues are available from the following locations:
- Security patches are available from the Microsoft Download Center, and can be most easily found by doing a keyword search for "security_patch".
- Patches for consumer platforms are available from the WindowsUpdate web site.
Microsoft thanks the following people for working with us to protect customers:
- Michiel Kikkert (email@example.com) for reporting the Zone Spoofing vulnerability.
- Joao Gouviea (firstname.lastname@example.org) for reporting the HTTP Request Encoding vulnerability.
- Microsoft Knowledge Base article Q306121 and Q308414 discusses this issue and will be available approximately 24 hours after the release of this bulletin. Knowledge Base articles can be found on the Microsoft Online Support web site.
- Technical support is available from Microsoft Product Support Services. There is no charge for support ca2lls associated with security patches.
Security Resources: The Microsoft TechNet Security Web Site provides additional information about security in Microsoft products.
The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.
- V1.0 (October 10, 2001): Bulletin Created.
- V1.1 (October 12, 2001): Information in Verifying Patch Installation section updated to indicate that verification information for IE 6 is the same as for other versions.
- V1.2 (February 08, 2002): Updated with table containing vulnerability information for IE 5.01 SP2 on Windows 2000, IE 5.5 SP1, IE 5.5SP2, and IE 6.0.
- V1.3 (June 13, 2003): Updated download links to Windows Update.
Built at 2014-04-18T13:49:36Z-07:00