CustomAttributeData CustomAttributeData CustomAttributeData CustomAttributeData Class

Définition

Fournit un accès aux données d'attribut personnalisé pour les assemblys, les modules, les types, les membres et les paramètres qui sont chargés dans le contexte de réflexion uniquement.Provides access to custom attribute data for assemblies, modules, types, members and parameters that are loaded into the reflection-only context.

public ref class CustomAttributeData
[System.Runtime.InteropServices.ComVisible(true)]
[System.Serializable]
public class CustomAttributeData
type CustomAttributeData = class
Public Class CustomAttributeData
Héritage
CustomAttributeDataCustomAttributeDataCustomAttributeDataCustomAttributeData
Attributs

Exemples

L’exemple suivant définit un attribut personnalisé avec quatre constructeurs et quatre propriétés.The following example defines a custom attribute with four constructors and four properties. Deux des propriétés sont en lecture seule et sont définies à l’aide des paramètres positionnels des constructeurs.Two of the properties are read-only, and are set by using the positional parameters of the constructors. Les deux autres propriétés sont en lecture/écriture et peuvent être définies uniquement à l’aide d’arguments nommés.The other two properties are read/write, and can be set only by using named arguments. Une propriété positionnel est un tableau de chaînes, et une propriété nommée est un tableau d’entiers.One positional property is an array of strings, and one named property is an array of integers.

L’attribut est appliqué à l’assembly, à un type déclaré dans l’assembly, à une méthode du type, et à un paramètre de la méthode.The attribute is applied to the assembly, to a type declared in the assembly, to a method of the type, and to a parameter of the method. Différents constructeurs sont utilisés dans ces cas.Different constructors are used for these cases. Lorsqu’il est exécuté, l’assembly se charge dans le contexte de réflexion uniquement et affiche des informations sur les attributs personnalisés qui ont été appliqués à celui-ci, ainsi que sur le type et les membres qu’il contient.When executed, the assembly loads itself into the reflection-only context and displays information about the custom attributes that were applied to it and to the type and members it contains.

L’attribut qui est appliqué au type montre les propriétés de tableau, avec les arguments positionnels et nommés.The attribute that is applied to the type demonstrates array properties, with both positional and named arguments.

using namespace System;
using namespace System::Reflection;
using namespace System::Collections::Generic;
using namespace System::Collections::ObjectModel;

// An enumeration used by the ExampleAttribute class.
public enum class ExampleKind
{
   FirstKind, SecondKind, ThirdKind, FourthKind
};

// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets::All)]
public ref class ExampleAttribute: public Attribute
{
private:
   // Data for properties.
   ExampleKind kindValue;
   String^ noteValue;
   array<String^>^ arrayStrings;
   array<int>^ arrayNumbers;

   // Constructors. 
   void ExampleAttributeInitialize( ExampleKind initKind, array<String^>^ initStrings )
   {
      kindValue = initKind;
      arrayStrings = initStrings;
   }
public:
   ExampleAttribute()
   {
      ExampleAttributeInitialize( ExampleKind::FirstKind, nullptr );
   }
   ExampleAttribute( ExampleKind initKind )
   {
      ExampleAttributeInitialize( initKind, nullptr );
   }
   ExampleAttribute( ExampleKind initKind, array<String^>^ initStrings )
   {
      ExampleAttributeInitialize( initKind, initStrings );
   }

   // Properties. The Note and Numbers properties must be read/write, so they
   // can be used as named parameters.
   //
   property ExampleKind Kind 
   {
      ExampleKind get()
      {
         return kindValue;
      }
   }
   property array<String^>^ Strings
   {
      array<String^>^ get()
      {
         return arrayStrings;
      }
   }
   property String^ Note 
   {
      String^ get()
      {
         return noteValue;
      }

      void set( String^ value )
      {
         noteValue = value;
      }
   }
   property array<int>^ Numbers
   {
      array<int>^ get()
      {
         return arrayNumbers;
      }

      void set( array<int>^ value )
      {
         arrayNumbers = value;
      }
   }
};

// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind::ThirdKind,Note="This is a note on the assembly.")];

// The example attribute is applied to the test class.
//
[Example(ExampleKind::SecondKind, 
         gcnew array<String^> { "String array argument, line 1", 
                        "String array argument, line 2", 
                        "String array argument, line 3" }, 
         Note="This is a note on the class.",
         Numbers = gcnew array<int> { 53, 57, 59 })] 
public ref class Test
{
public:
   // The example attribute is applied to a method, using the
   // parameterless constructor and supplying a named argument.
   // The attribute is also applied to the method parameter.
   //
   [Example(Note="This is a note on a method.")]
   void TestMethod( [Example] Object^ arg ){}

   // Main() gets objects representing the assembly, the test
   // type, the test method, and the method parameter. Custom
   // attribute data is displayed for each of these.
   //
   static void Main()
   {
      Assembly^ assembly = Assembly::ReflectionOnlyLoad( "Source" );
      Type^ t = assembly->GetType( "Test" );
      MethodInfo^ m = t->GetMethod( "TestMethod" );
      array<ParameterInfo^>^p = m->GetParameters();

      Console::WriteLine( "\r\nAttributes for assembly: '{0}'", assembly );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( assembly ) );
      Console::WriteLine( "\r\nAttributes for type: '{0}'", t );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( t ) );
      Console::WriteLine( "\r\nAttributes for member: '{0}'", m );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( m ) );
      Console::WriteLine( "\r\nAttributes for parameter: '{0}'", p );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( p[ 0 ] ) );
   }

private:
    static void ShowValueOrArray(CustomAttributeTypedArgument^ cata)
    {
        if (cata->Value->GetType() == ReadOnlyCollection<CustomAttributeTypedArgument>::typeid)
        {
            Console::WriteLine("         Array of '{0}':", cata->ArgumentType);

            for each (CustomAttributeTypedArgument^ cataElement in 
                (ReadOnlyCollection<CustomAttributeTypedArgument>^) cata->Value)
            {
                Console::WriteLine("             Type: '{0}'  Value: '{1}'",
                    cataElement->ArgumentType, cataElement->Value);
            }
        }
        else
        {
            Console::WriteLine( "         Type: '{0}'  Value: '{1}'",
               cata->ArgumentType, cata->Value );
        }
    }

   static void ShowAttributeData( IList< CustomAttributeData^ >^ attributes )
   {
      for each ( CustomAttributeData^ cad in attributes )
      {
         Console::WriteLine( "   {0}", cad );
         Console::WriteLine( "      Constructor: '{0}'", cad->Constructor );

         Console::WriteLine( "      Constructor arguments:" );
         for each ( CustomAttributeTypedArgument^ cata in cad->ConstructorArguments )
         {
            ShowValueOrArray(cata);
         }

         Console::WriteLine( "      Named arguments:" );
         for each ( CustomAttributeNamedArgument cana in cad->NamedArguments )
         {
            Console::WriteLine( "         MemberInfo: '{0}'", cana.MemberInfo );
            ShowValueOrArray(cana.TypedValue);
         }
      }
   }
};

int main()
{
   Test::Main();
}

/* This code example produces output similar to the following:

Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
      Constructor: 'Void .ctor(Int32)'
      Constructor arguments:
         Type: 'System.Int32'  Value: '8'
      Named arguments:
   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'Boolean WrapNonExceptionThrows'
         Type: 'System.Boolean'  Value: 'True'
   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
      Constructor: 'Void .ctor(ExampleKind)'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '2'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the assembly.'

Attributes for type: 'Test'
   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
      Constructor: 'Void .ctor(ExampleKind, System.String[])'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '1'
         Array of 'System.String[]':
             Type: 'System.String'  Value: 'String array argument, line 1'
             Type: 'System.String'  Value: 'String array argument, line 2'
             Type: 'System.String'  Value: 'String array argument, line 3'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the class.'
         MemberInfo: 'Int32[] Numbers'
         Array of 'System.Int32[]':
             Type: 'System.Int32'  Value: '53'
             Type: 'System.Int32'  Value: '57'
             Type: 'System.Int32'  Value: '59'

Attributes for member: 'Void TestMethod(System.Object)'
   [ExampleAttribute(Note = "This is a note on a method.")]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on a method.'

Attributes for parameter: 'System.Object arg'
   [ExampleAttribute()]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
*/
using System;
using System.Reflection;
using System.Collections.Generic;
using System.Collections.ObjectModel;

// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind.ThirdKind, Note="This is a note on the assembly.")]

// An enumeration used by the ExampleAttribute class.
public enum ExampleKind
{
    FirstKind, 
    SecondKind, 
    ThirdKind, 
    FourthKind
};

// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets.All)]
public class ExampleAttribute : Attribute
{
    // Data for properties.
    private ExampleKind kindValue;
    private string noteValue;
    private string[] arrayStrings;
    private int[] arrayNumbers;

    // Constructors. The parameterless constructor (.ctor) calls
    // the constructor that specifies ExampleKind and an array of 
    // strings, and supplies the default values.
    //
    public ExampleAttribute(ExampleKind initKind, string[] initStrings)
    {
        kindValue = initKind;
        arrayStrings = initStrings;
    }
    public ExampleAttribute(ExampleKind initKind) : this(initKind, null) {}
    public ExampleAttribute() : this(ExampleKind.FirstKind, null) {}

    // Properties. The Note and Numbers properties must be read/write, so they
    // can be used as named parameters.
    //
    public ExampleKind Kind { get { return kindValue; }}
    public string[] Strings { get { return arrayStrings; }}
    public string Note    
    {
        get { return noteValue; }
        set { noteValue = value; }
    }
    public int[] Numbers
    {
        get { return arrayNumbers; }
        set { arrayNumbers = value; }
    }
}

// The example attribute is applied to the test class.
//
[Example(ExampleKind.SecondKind, 
         new string[] { "String array argument, line 1", 
                        "String array argument, line 2", 
                        "String array argument, line 3" }, 
         Note="This is a note on the class.",
         Numbers = new int[] { 53, 57, 59 })] 
public class Test
{
    // The example attribute is applied to a method, using the
    // parameterless constructor and supplying a named argument.
    // The attribute is also applied to the method parameter.
    //
    [Example(Note="This is a note on a method.")]
    public void TestMethod([Example] object arg) { }

    // Main() gets objects representing the assembly, the test
    // type, the test method, and the method parameter. Custom
    // attribute data is displayed for each of these.
    //
    public static void Main()
    {
        Assembly asm = Assembly.ReflectionOnlyLoad("Source");
        Type t = asm.GetType("Test");
        MethodInfo m = t.GetMethod("TestMethod");
        ParameterInfo[] p = m.GetParameters();

        Console.WriteLine("\r\nAttributes for assembly: '{0}'", asm);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm));
        Console.WriteLine("\r\nAttributes for type: '{0}'", t);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t));
        Console.WriteLine("\r\nAttributes for member: '{0}'", m);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m));
        Console.WriteLine("\r\nAttributes for parameter: '{0}'", p);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p[0]));
    }

    private static void ShowAttributeData(
        IList<CustomAttributeData> attributes)
    {
        foreach( CustomAttributeData cad in attributes )
        {
            Console.WriteLine("   {0}", cad);
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor);

            Console.WriteLine("      Constructor arguments:");
            foreach( CustomAttributeTypedArgument cata 
                in cad.ConstructorArguments )
            {
                ShowValueOrArray(cata);
            }

            Console.WriteLine("      Named arguments:");
            foreach( CustomAttributeNamedArgument cana 
                in cad.NamedArguments )
            {
                Console.WriteLine("         MemberInfo: '{0}'", 
                    cana.MemberInfo);
                ShowValueOrArray(cana.TypedValue);
            }
        }
    }

    private static void ShowValueOrArray(CustomAttributeTypedArgument cata)
    {
        if (cata.Value.GetType() == typeof(ReadOnlyCollection<CustomAttributeTypedArgument>))
        {
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType);

            foreach (CustomAttributeTypedArgument cataElement in 
                (ReadOnlyCollection<CustomAttributeTypedArgument>) cata.Value)
            {
                Console.WriteLine("             Type: '{0}'  Value: '{1}'",
                    cataElement.ArgumentType, cataElement.Value);
            }
        }
        else
        {
            Console.WriteLine("         Type: '{0}'  Value: '{1}'", 
                cata.ArgumentType, cata.Value);
        }
    }
}

/* This code example produces output similar to the following:

Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
      Constructor: 'Void .ctor(Int32)'
      Constructor arguments:
         Type: 'System.Int32'  Value: '8'
      Named arguments:
   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'Boolean WrapNonExceptionThrows'
         Type: 'System.Boolean'  Value: 'True'
   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
      Constructor: 'Void .ctor(ExampleKind)'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '2'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the assembly.'

Attributes for type: 'Test'
   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
      Constructor: 'Void .ctor(ExampleKind, System.String[])'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '1'
         Array of 'System.String[]':
             Type: 'System.String'  Value: 'String array argument, line 1'
             Type: 'System.String'  Value: 'String array argument, line 2'
             Type: 'System.String'  Value: 'String array argument, line 3'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the class.'
         MemberInfo: 'Int32[] Numbers'
         Array of 'System.Int32[]':
             Type: 'System.Int32'  Value: '53'
             Type: 'System.Int32'  Value: '57'
             Type: 'System.Int32'  Value: '59'

Attributes for member: 'Void TestMethod(System.Object)'
   [ExampleAttribute(Note = "This is a note on a method.")]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on a method.'

Attributes for parameter: 'System.Object arg'
   [ExampleAttribute()]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
*/
Imports System.Reflection
Imports System.Collections.Generic
Imports System.Collections.ObjectModel

' The example attribute is applied to the assembly.
<Assembly:Example(ExampleKind.ThirdKind, Note:="This is a note on the assembly.")>

' An enumeration used by the ExampleAttribute class.
Public Enum ExampleKind
    FirstKind
    SecondKind
    ThirdKind
    FourthKind
End Enum

' An example attribute. The attribute can be applied to all
' targets, from assemblies to parameters.
'
<AttributeUsage(AttributeTargets.All)> _
Public Class ExampleAttribute
    Inherits Attribute

    ' Data for properties.
    Private kindValue As ExampleKind
    Private noteValue As String
    Private arrayStrings() As String
    Private arrayNumbers() As Integer

    ' Constructors. The parameterless constructor (.ctor) calls
    ' the constructor that specifies ExampleKind and an array of
    ' strings, and supplies the default values.
    '
    Public Sub New(ByVal initKind As ExampleKind, ByVal initStrings() As String)
        kindValue = initKind
        arrayStrings = initStrings
    End Sub
    Public Sub New(ByVal initKind As ExampleKind)
        Me.New(initKind, Nothing)
    End Sub
    Public Sub New()
        Me.New(ExampleKind.FirstKind, Nothing)
    End Sub

    ' Properties. The Note and Numbers properties must be read/write, so they 
    ' can be used as named parameters.
    '
    Public ReadOnly Property Kind As ExampleKind
        Get
            Return kindValue 
        End Get
    End Property
    Public ReadOnly Property Strings As String()
        Get
            Return arrayStrings 
        End Get
    End Property
    Public Property Note As String
        Get
            Return noteValue 
        End Get
        Set
            noteValue = value
        End Set
    End Property
    Public Property Numbers As Integer()
        Get
            Return arrayNumbers 
        End Get
        Set
            arrayNumbers = value
        End Set
    End Property
End Class

' The example attribute is applied to the test class.
'
<Example(ExampleKind.SecondKind, _
         New String() { "String array argument, line 1", _
                        "String array argument, line 2", _
                        "String array argument, line 3" }, _
         Note := "This is a note on the class.", _
         Numbers := New Integer() { 53, 57, 59 })> _
Public Class Test
    ' The example attribute is applied to a method, using the
    ' parameterless constructor and supplying a named argument.
    ' The attribute is also applied to the method parameter.
    '
    <Example(Note:="This is a note on a method.")> _
    Public Sub TestMethod(<Example()> ByVal arg As Object)
    End Sub

    ' Sub Main gets objects representing the assembly, the test
    ' type, the test method, and the method parameter. Custom
    ' attribute data is displayed for each of these.
    '
    Public Shared Sub Main()
        Dim asm As [Assembly] = Assembly.ReflectionOnlyLoad("source")
        Dim t As Type = asm.GetType("Test")
        Dim m As MethodInfo = t.GetMethod("TestMethod")
        Dim p() As ParameterInfo = m.GetParameters()

        Console.WriteLine(vbCrLf & "Attributes for assembly: '{0}'", asm)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm))
        Console.WriteLine(vbCrLf & "Attributes for type: '{0}'", t)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t))
        Console.WriteLine(vbCrLf & "Attributes for member: '{0}'", m)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m))
        Console.WriteLine(vbCrLf & "Attributes for parameter: '{0}'", p)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p(0)))
    End Sub

    Private Shared Sub ShowAttributeData( _
        ByVal attributes As IList(Of CustomAttributeData))

        For Each cad As CustomAttributeData _
            In CType(attributes, IEnumerable(Of CustomAttributeData))

            Console.WriteLine("   {0}", cad)
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor)

            Console.WriteLine("      Constructor arguments:")
            For Each cata As CustomAttributeTypedArgument _
                In CType(cad.ConstructorArguments, IEnumerable(Of CustomAttributeTypedArgument))

                ShowValueOrArray(cata)
            Next

            Console.WriteLine("      Named arguments:")
            For Each cana As CustomAttributeNamedArgument _
                In CType(cad.NamedArguments, IEnumerable(Of CustomAttributeNamedArgument))

                Console.WriteLine("         MemberInfo: '{0}'", _
                    cana.MemberInfo)
                ShowValueOrArray(cana.TypedValue)
            Next
        Next
    End Sub

    Private Shared Sub ShowValueOrArray(ByVal cata As CustomAttributeTypedArgument)
        If cata.Value.GetType() Is GetType(ReadOnlyCollection(Of CustomAttributeTypedArgument)) Then
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType)

            For Each cataElement As CustomAttributeTypedArgument In cata.Value
                Console.WriteLine("             Type: '{0}'  Value: '{1}'", _
                    cataElement.ArgumentType, cataElement.Value)
            Next
        Else
            Console.WriteLine("         Type: '{0}'  Value: '{1}'", _
                cata.ArgumentType, cata.Value)
        End If       
    End Sub
End Class

' This code example produces output similar to the following:
'
'Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
'   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
'      Constructor: 'Void .ctor(Int32)'
'      Constructor arguments:
'         Type: 'System.Int32'  Value: '8'
'      Named arguments:
'   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'Boolean WrapNonExceptionThrows'
'         Type: 'System.Boolean'  Value: 'True'
'   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
'      Constructor: 'Void .ctor(ExampleKind)'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '2'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the assembly.'
'
'Attributes for type: 'Test'
'   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
'      Constructor: 'Void .ctor(ExampleKind, System.String[])'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '1'
'         Array of 'System.String[]':
'             Type: 'System.String'  Value: 'String array argument, line 1'
'             Type: 'System.String'  Value: 'String array argument, line 2'
'             Type: 'System.String'  Value: 'String array argument, line 3'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the class.'
'         MemberInfo: 'Int32[] Numbers'
'         Array of 'System.Int32[]':
'             Type: 'System.Int32'  Value: '53'
'             Type: 'System.Int32'  Value: '57'
'             Type: 'System.Int32'  Value: '59'
'
'Attributes for member: 'Void TestMethod(System.Object)'
'   [ExampleAttribute(Note = "This is a note on a method.")]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on a method.'
'
'Attributes for parameter: 'System.Object arg'
'   [ExampleAttribute()]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:

Remarques

Le code en cours d’examen dans le contexte de réflexion uniquement ne peut pas être exécuté. il n’est donc pas toujours possible d’examiner des attributs personnalisés en créant des instances de ceux-ci, Attribute.GetCustomAttributespuis MemberInfo.GetCustomAttributesen examinant leurs propriétés, à l’aide de méthodes telles que,, etc. .Code that is being examined in the reflection-only context cannot be executed, so it is not always possible to examine custom attributes by creating instances of them and then examining their properties, using methods like Attribute.GetCustomAttributes, MemberInfo.GetCustomAttributes, and so on. Si le code du type d’attribut lui-même est chargé dans le contexte de réflexion uniquement, il ne peut pas être exécuté.If the code for the attribute type itself is loaded into the reflection-only context, it cannot be executed.

La CustomAttributeData classe permet l’examen d’attributs personnalisés dans le contexte de réflexion uniquement en fournissant une abstraction pour les attributs.The CustomAttributeData class allows examination of custom attributes in the reflection-only context by providing an abstraction for attributes. Les membres de cette classe peuvent être utilisés pour obtenir les arguments positionnels et les arguments nommés de l’attribut.The members of this class can be used to obtain the positional arguments and named arguments of the attribute. Utilisez la ConstructorArguments propriété pour obtenir la liste des CustomAttributeTypedArgument structures qui représentent les arguments positionnels et utilisez la NamedArguments propriété pour obtenir la liste des CustomAttributeNamedArgument structures qui représentent les arguments nommés.Use the ConstructorArguments property to get a list of CustomAttributeTypedArgument structures that represent the positional arguments, and use the NamedArguments property to get a list of CustomAttributeNamedArgument structures that represent the named arguments.

Notes

La CustomAttributeNamedArgument structure fournit uniquement des informations sur la propriété d’attribut utilisée pour obtenir et définir la valeur de l’argument.The CustomAttributeNamedArgument structure only provides information about the attribute property used to get and set the argument value. Pour obtenir le type et la valeur de l’argument, utilisez CustomAttributeNamedArgument.TypedValue la propriété pour obtenir CustomAttributeTypedArgument une structure.To obtain the type and value of the argument, use the CustomAttributeNamedArgument.TypedValue property to obtain a CustomAttributeTypedArgument structure.

Quand vous avez une CustomAttributeTypedArgument structure pour un argument, qu’il soit nommé ou positionnel, utilisez CustomAttributeTypedArgument.ArgumentType la propriété pour obtenir le type et CustomAttributeTypedArgument.Value la propriété pour obtenir la valeur.When you have a CustomAttributeTypedArgument structure for an argument, whether named or positional, use the CustomAttributeTypedArgument.ArgumentType property to get the type and the CustomAttributeTypedArgument.Value property to get the value.

Notes

Pour un argument de tableau, CustomAttributeTypedArgument.Value la propriété retourne un ReadOnlyCollection<T> générique CustomAttributeTypedArgument d’objets.For an array argument, the CustomAttributeTypedArgument.Value property returns a generic ReadOnlyCollection<T> of CustomAttributeTypedArgument objects. Chaque CustomAttributeTypedArgument objet de la collection représente l’élément correspondant du tableau.Each CustomAttributeTypedArgument object in the collection represents the corresponding element of the array.

CustomAttributeDatapeut être utilisé dans le contexte d’exécution et dans le contexte de réflexion uniquement.CustomAttributeData can be used in the execution context as well as in the reflection-only context. Par exemple, vous souhaiterez peut-être éviter de charger l’assembly qui contient le code d’un attribut personnalisé.For example, you might want to avoid loading the assembly that contains the code for a custom attribute. L’utilisation CustomAttributeData de la classe diffère de l’utilisation Attribute.GetCustomAttributesde méthodes telles que :Using the CustomAttributeData class is different from using methods like Attribute.GetCustomAttributes:

  • Les propriétés et les méthodes CustomAttributeData de vous fournissent uniquement les valeurs qui ont été spécifiées pour l’instance d’attribut, et non la sémantique du constructeur.The properties and methods of CustomAttributeData only provide you with the values that were specified for the attribute instance, not the semantics of the constructor. Par exemple, un argument de chaîne d’un attribut peut être converti en interne en une autre représentation, et retourné sous une forme canonique ; ou une propriété peut avoir des effets secondaires lorsque le code d’attribut réel est exécuté.For example, a string argument of an attribute might be converted internally to some other representation, and returned in a canonical form; or a property might have side effects when the actual attribute code is executed.

  • Les propriétés et les méthodes CustomAttributeData de ne vous permettent pas de récupérer les attributs personnalisés hérités de classes de base.The properties and methods of CustomAttributeData do not allow you to retrieve the custom attributes inherited from base classes.

Pour créer des instances de CustomAttributeData la classe, utilisez static lesShared méthodes de fabrique GetCustomAttributes (en Visual Basic).To create instances of the CustomAttributeData class, use the static (Shared in Visual Basic) GetCustomAttributes factory methods.

Constructeurs

CustomAttributeData() CustomAttributeData() CustomAttributeData() CustomAttributeData()

Initialise une nouvelle instance de la classe CustomAttributeData.Initializes a new instance of the CustomAttributeData class.

Propriétés

AttributeType AttributeType AttributeType AttributeType

Obtient le type de l'attribut.Gets the type of the attribute.

Constructor Constructor Constructor Constructor

Obtient un objet ConstructorInfo qui représente le constructeur qui aurait initialisé l’attribut personnalisé.Gets a ConstructorInfo object that represents the constructor that would have initialized the custom attribute.

ConstructorArguments ConstructorArguments ConstructorArguments ConstructorArguments

Obtient la liste d'arguments de position spécifiés pour l'instance d'attribut représentée par l'objet CustomAttributeData.Gets the list of positional arguments specified for the attribute instance represented by the CustomAttributeData object.

NamedArguments NamedArguments NamedArguments NamedArguments

Obtient la liste d'arguments nommés spécifiés pour l'instance d'attribut représentée par l'objet CustomAttributeData.Gets the list of named arguments specified for the attribute instance represented by the CustomAttributeData object.

Méthodes

Equals(Object) Equals(Object) Equals(Object) Equals(Object)

Retourne une valeur qui indique si cette instance est égale à un objet spécifié.Returns a value that indicates whether this instance is equal to a specified object.

GetCustomAttributes(Assembly) GetCustomAttributes(Assembly) GetCustomAttributes(Assembly) GetCustomAttributes(Assembly)

Renvoie une liste d’objets CustomAttributeData représentant des données sur les attributs qui ont été appliqués à l’assembly cible.Returns a list of CustomAttributeData objects representing data about the attributes that have been applied to the target assembly.

GetCustomAttributes(MemberInfo) GetCustomAttributes(MemberInfo) GetCustomAttributes(MemberInfo) GetCustomAttributes(MemberInfo)

Renvoie une liste d’objets CustomAttributeData représentant des données sur les attributs qui ont été appliqués au membre cible.Returns a list of CustomAttributeData objects representing data about the attributes that have been applied to the target member.

GetCustomAttributes(Module) GetCustomAttributes(Module) GetCustomAttributes(Module) GetCustomAttributes(Module)

Renvoie une liste d’objets CustomAttributeData représentant des données sur les attributs qui ont été appliqués au module cible.Returns a list of CustomAttributeData objects representing data about the attributes that have been applied to the target module.

GetCustomAttributes(ParameterInfo) GetCustomAttributes(ParameterInfo) GetCustomAttributes(ParameterInfo) GetCustomAttributes(ParameterInfo)

Retourne une liste d’objets CustomAttributeData représentant des données sur les attributs qui ont été appliqués au paramètre cible.Returns a list of CustomAttributeData objects representing data about the attributes that have been applied to the target parameter.

GetHashCode() GetHashCode() GetHashCode() GetHashCode()

Sert de fonction de hachage pour un type particulier.Serves as a hash function for a particular type.

GetType() GetType() GetType() GetType()

Obtient le Type de l'instance actuelle.Gets the Type of the current instance.

(Inherited from Object)
MemberwiseClone() MemberwiseClone() MemberwiseClone() MemberwiseClone()

Crée une copie superficielle de l'objet Object actuel.Creates a shallow copy of the current Object.

(Inherited from Object)
ToString() ToString() ToString() ToString()

Retourne une représentation sous forme de chaîne de l'attribut personnalisé.Returns a string representation of the custom attribute.

S’applique à

Voir aussi